Blu-ray Bewegtmenü in Encore CS3 überhaupt möglich?

Hallo,
habe gerade ein Bewegtmenü (vollflächiges Video + transparenter vollflächiger Button)in Encore CS3 erstellt und dieses Projekt als DVD und als blu-ray gebrannt.
DVD läuft einwandfrei. Video im Menü läuft flüssig ab und Button funktioniert auch. Wie in der Encore Vorschau eben auch.
Die blu-ray hingegen zeigt mir nur ein schwarzes Bild (getestet auf Sony + Panasonic blu-ray-Player) wenn das Videomenü ablaufen sollte (Button funktioniert aber). Habe es im Notebook dann auch noch getestet und was merkwürdiges festgestellt. Das Videomenü spielt ab aber zeigt nur ein schwarzes Bild.
Wer kann mir das erklären? Und wichtiger noch, wie bekomm ich das ganze so zum laufen, dass auch auf der blu-ray mein Videomenü korrekt abspielt.
Danke schonmal
Christoph

Hallo Mylenium,
vielen Dank für die Antwort. Die 24p funktionieren aber nur im NTSC und nicht im PAL-Format.
Heute hat Panasonic eine neue Camcordergeneration mit 1080p50 vorgestellt. Ist bekannt, ob Adobe dieses Format unterstützen wird?
Vielen Dank für die Antworten!
Gruß leznem

Similar Messages

  • Problem timing slides to audio in Blu-ray slideshow in encore cs5. Help!

    I'm using a 2006 mac pro 1,1 with 7GB, and I'm trying to make a blu-ray slideshow with encore cs5. There is about 20 minutes of music for 99 slides. I click "fit slideshow to audio" and the time per slide increases to about 12 seconds, which is correct, and when I preview the slideshow it
    plays back correctly. But when the blu-ray or image is burned, the slides last only about a second or two each and the audio cuts off abruptly at the end of the 99th slide. This project, by the way, has two slideshows which play one after the other. Both have the same problem.
    Operating System: Mac OS X (v10.6.4)
    Video display card / driver version: Quadro FX4500
    I examined the blu-ray file streams created by encore cs5 with VLC. The slide transitions (cross dissolve) were about 2 megabytes each and played correctly, but the slides themselves seem too short at around 300kb and don't play back at all. Video Blu-rays work fine; the problem only shows up on blu-ray slideshows. When that same slideshow is burned as a dvd, by the way, it also works fine. What's going on?

    I have just the same problem with Encore CS5 running on Windows 7 64 bit:
    When i create a slide show with music,the length of music defines the
    length of the slide show every thing works fine when i play the e show with preview
    function in Encore. When i burn it on a blu ray disk it works fine
    (in sync) playing the BD disk on the PC, but when i play the BD
    when i play the BD disk on a BD player (Sony BDP-S300 or BDP-S470) the music
    stops many seconds before the slide show is finished.
    Burning the slide show with Encore on a DVD everything works correct. 

  • How to read Blu-Ray disk from Encore

    I shot footage in 1080i on a Sony HDR-HC7 camcorder. I edited it in Adobe Premiere Pro CS3 V3.2.0 (374) running on XP home edition. I then created an Adobe Encore project (Encore CS3 V3.0.1.008). From Encore I burned 2 standard DVD's, one on the DVD burner & the other on my Blu-Ray burner (LG GGW-H20L, firmware YL05)). Both disks played perfectly on my Sony Blu-Ray player ( Sony BDP-S300).
    From the same project I then burned a Blu-Ray disk using Verbatim BD-RE (2X) on the same LG drive. When I attempted to play this disk on the same Sony player I got the message 'Can't play'. I repeated the above process several times & each time I produced a Blu-Ray disk that can't be read.
    Can anybody tell me how I can resolve this problem?

    Many thanks! Updating the firmware on the Sony player did the trick (V2.1 to
    V4.5). The earlier version could not read BD-R(E).
    Regards,
    redmondo

  • Blu Ray Burned in Encore CS4 play audio but no video

    I've burned this project multiple times and everytime I get the menus and the audio, but no video when played on a Blu Ray player. The same disc plays fine in computer/laptop. And when I tried a shorter version of the project (10 minutes vs. an hour and a half for the original) it plays fine everywhere. Could the file size be causing my disc not to play in a BD-R player? Then why would it play on a computer/laptop?

    More information needed for someone to help
    http://forums.adobe.com/thread/416679
    Some specific information that is needed...
    Build a Configuration file http://www.piriform.com/speccy
    Brand/Model Computer (or Brand/Model Motherboard if self-built)
    How much system memory you have installed, such as 2Gig or ???
    Operating System version, such as Win7 64bit Pro... or whatevevr
    -including your security settings, such as are YOU the Administrator
    -and have you tried to RIGHT click the program Icon and then select
    -the Run as Administrator option (for Windows, not sure about Mac)
    Your Firewall settings and brand of anti-virus are you running
    Brand/Model graphics card, sush as ATI "xxxx" or nVidia "xxxx"
    -or the brand/model graphics chip if on the motherboard
    -and the exact driver version for the above graphics card/chip
    -and how much video memory you have on your graphics card
    Brand/Model sound card, or sound "chip" name on Motherboard
    -and the exact driver version for the above sound card/chip
    Size(s) and configuration of your hard drive(s)... example below
    -and how much FREE space is available on each drive (in Windows
    -you RIGHT click the drive letter while using Windows Explorer
    -and then select the Properties option to see used/free space)
    Windows Indexing is BAD http://forums.adobe.com/thread/676303
    While in Properties, be sure you have drive indexing set OFF
    -for the drive, and for all directories, to improve performance
    Some/Much of the above are available by going to the Windows
    Control Panel and then the Hardware option (Win7 option name)
    OR Control Panel--System--Hardware Tab--Device Manager for WinXP
    And the EXACT type and size of file that is causing you problems
    -for pictures, that includes the camera used and the pixel dimensions
    Plus Video-Specific Information http://forums.adobe.com/thread/459220?tstart=0
    Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037?tstart=0
    What is a CODEC... a Primer http://forums.adobe.com/thread/546811?tstart=0
    What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037?tstart=0
    Report back with the codec details of your file, use the programs below
    For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/en
    For Mac http://mediainfo.massanti.com/
    Once you know exactly what it is you are editing, report back with that information... and your project setting, and if there is a red line above the video in the timeline, which indicates a mismatch between video and project
    Read Bill Hunt on editing a VOB/MPG file http://forums.adobe.com/thread/464549?tstart=0
    Edit Vob http://premierepro.wikia.com/wiki/FAQ:How_do_I_import_VOB_files_/_edit_a_DVD%3F
    Read Hunt on Using MOD/TOD files http://forums.adobe.com/thread/699990?tstart=0
    Work through all of the steps (ideas) listed at http://forums.adobe.com/thread/459220?tstart=0
    If your problem isn't fixed after you follow all of the steps, report back with ALL OF THE DETAILS asked for in the FINALLY section at the troubleshooting link
    Also read file troubleshooting http://kb2.adobe.com/cps/407/kb407928.html
    Odd Errors http://forums.adobe.com/thread/670174?tstart=0
    For CS4 you must update the Roxio component http://forums.adobe.com/thread/400484?tstart=0
    More on Encore and Roxio http://forums.adobe.com/thread/528582?tstart=0 or direct to
    http://kb.roxio.com/search.aspx?URL=/content/kb/General%20Information/000070GN&PARAMS
    As well as the below, right click the Encore icon and select Run as Administrator... which is NOT the same thing as running the computer with the Administrator account... and which fixes several "odd" problems
    Run as Administrator http://forums.adobe.com/thread/771202?tstart=0
    Long File Names or odd characters cause problems
    Read http://forums.adobe.com/thread/588273
    And #4 http://forums.adobe.com/thread/666558?tstart=0
    And This Message Thread http://forums.adobe.com/thread/665641?tstart=0

  • How to burn Blu-ray disk from Encore?

    My project was shot and edited in HD. The camera was a Sony AX2000 1920 X 1080 60i the highest resolution for the camera. The project has been exported to Encore (CS5.5 Production Premium)and is on the timeline there. How do I get in touch with "Chat" to get phone help to go from where I am to burning a Blu-ray disk? When I try to email Adobe Help I am routed round and round back to same place and I can never find anyplace to send an email to Adobe to ask a support question. When I click on "Help" from Premiere Pro or Encore the explanations use frequent links to videos elsewhere for explanations and none of the links are functional! Why is that? I can't find an explanation online or in Adobe's Classroom in a book or anywhere. I would appreciate some links to videos explaining the process or some basic instructions. Thank you.

    Encore also has a very active forum too: http://forums.adobe.com/community/encore/encore_general
    Good luck,
    Hunt

  • Menu Blue Ray maked in encore with crashes

    Hello, I have a problem and no solution can somehow, I wonder if you guys can help me.
    I did a project on Blue Ray in Encore, when I see in this preview is perfect, I burn an iso orrecord it on Blue Ray and when I watch it crashes a few seconds including the musicexactly the time the buttons will appear, the menu is animated and buttons appear in 32seconds of animation. I'm using the CS5 version and I can not a solution to this problem.Please help me
    thank you
    Priscilla 

    in computer and Blue Ray player... crashes in 32 seconds for 3 seconds and continue normal.... I dont know what is this. the same project in dvd is normal.

  • Transacoding Blue Ray project in Encore CS4 gives error!

    I am transcading a high def (AVCHD) project fo a Blue Ray image on my hard disk.
    The transcaoding runs for about 6 hours and when done it gives me the following error:
    Blue-ray Error:"device not ready", Code:"3", Note: "File can not open.(G:\MyDojo\cruise to alaska-2010\AuthorScriptHDMVSessions\-sessionFile_Asf-session_1_video.m2v.ves) -
    The path is a valid path and the file exists.
    Every time I try to rebuild, not having exited Encore, results in same error within seconds. Exiting Encore and re-building, starts the whole loooong process over.   
    Any ideas? Please help.
    NOTE: I used this method once before and it worked just fine.
    Running CS4 on a Vista Ultimate w/8GB Ram, plenty of disk, DELL XPS720.

    Some reading, and fixes if you have not updated
    Encore CS4 Roxio component problem http://forums.adobe.com/thread/400484?tstart=0
    More on Encore and Roxio http://forums.adobe.com/thread/528582?tstart=0 or direct to
    http://kb.roxio.com/search.aspx?URL=/content/kb/General%20Information/000070GN&PARAMS
    Long File Names Cause Crashing http://forums.adobe.com/thread/588273
    And #4 Here http://forums.adobe.com/thread/666558?tstart=0
    And This Message Thread http://forums.adobe.com/thread/665641?tstart=0
    Encore Tutorial http://www.precomposed.com/blog/2009/05/encore-tutorial/
    Things and Software to AVOID when authoring/burning a DVD
    Read all links/sub-links to create a "best" burned disc
    Start --> http://forums.adobe.com/thread/608660?tstart=0
    #2 has WHY Explained http://forums.adobe.com/thread/607390
    Plus a Microsoft note http://support.microsoft.com/kb/314060
    And another note http://support.microsoft.com/kb/982116
    http://forums.adobe.com/community/encore/encore_faq

  • PrCS5.5: what are the setting to produce a Blu-Ray disk with Encore CS5

    what are the setting for a sequence, media encoder, & Encore to produce a Blue-Ray disk.
    At present , I have tried several different combinations, but Encore just hinges

    sorry  i forgot the link...
    http://www.precomposed.com/tutorials/04_bluray_subtitles/
    at the end of tutorial , you find instructions for create a right iso image.
    Another thing. If you go to create a DVD Dual layer, Imgburn offers a excelent tool to set layer break. I prefer this option,and not Encore automatic option.
    You can check other tutorial
    How to write a Blu-ray Video disc using ImgBurn
    http://forum.imgburn.com/index.php?s=a3f19e39fa1a21b69df15414dc8b7a90&showtopic=9512

  • Problems burning Blu-Ray DVD with Encore CS6 Creative Cloud version

    I recently installed Premiere Pro CS6 from Creative Cloud on a high performance PC. Everything works fine but Encore Blu-Ray burn will not finallize... get error message after most of disc is burned. Have tried several burns without success. Same files burn okay with Cyberlink software. Seems to be a bug with CS6 Encore files.
    Have tried with Cyberlink removed from machine.... same problem. 
    Any suggestions??

    The error is: Blu-ray Error, "device error", Code "3", Note, "AS-StorageError = 97071
    I imported one HD Blu-Ray MPG file encoded in Premiere Pro for Blu-Ray DVD about 4GB in size.  It was set-up with simple "Play menu".  It burns up to the point of finalization, then the above error message occurs.
    I insstalled a second Blu-Ray burner (different brand) and attempted another burn but with same error message.  Also tried different brand of discs.
    I have a second computer that I had previously loaded the trial version of Permiere Pro CS6, then later opted to do complete install via Creative Cloud.   CS6 Encore will burn a Blu-Ray disc on this system with the same file without any problem or error messages.
    It seems to be a problem with the Creative Cloud installation on the first computer???

  • DVD Remote "skip" Function Doesn't Work for Blu-ray Projects (CS5 Encore)

         I have graduated from SD to HD and I need help.
    I just finished my first HD project in CS5, burned it to a Blu-ray disk and immediately encountered a problem: the skip forward and the skip backward remote functions don’t work. (I have encountered several other problems on the way to get here but I solved those with the help of the manual and by browsing this forum ). In this project, I am doing exactly what I have done in my previous SD projects (where this function works):
    In CS5 Encore, I added “Chapter Points at Intervals…”.
    On the timeline Properties Panel, I kept the default selection “Operations: All Permitted” (that includes “Search for Chapter” in the “Permitted User Operations” menu).
    In the “Project Preview” window, clicking on the “Next Chapter” or “Previous Chapter”, the function is executed correctly.
    Still, after burning the blu-ray disk and pressing the “skip forward” or “skip backward” buttons on the Blu-ray player (Panasonic DMP-BD65) remote, the “Operation is not permitted” message appears. (This very remote button function works on all my SD projects.)
    More background info: I am also using Encore Chapter Markers from the PrPro project linked with Adobe Dynamic Link, chapter marker End Actions (Jeff’s The Focal Easy Guide to Adobe Encore DVD 2.0, pp. 178-180), and Bill’s advice on using the “dip to black” transition to avoid the ~1 second gap between chapters in the Chapter Playlist that I use to play all chapters.  The following observation may be unrelated: in Encore’s Monitor Panel, the “Step Forward” button with pressing the Alt key does not move the CTI to the next GOP mark. The “Step Forward” or “Step Backward” functions (without pressing the Alt key) work (moving the CTI one frame)..
    At this point, I desperately need the Forum’s help.
    Thanks,
         - Laci.

    Up to now I worked only with standard definition projects and outputted them
    to DVDs. This is my HD project. My problem is that I am a bit confused with
    the proper (and simple) settings for a blu-ray project. Your
    questions/comments imply that I am making a "DVD project" - but then, how
    can I burn it to a BD?
    Here is what I am doing, and please, let me know if/where I am making my
    mistake:
    1.       On the camcorder the recording format is set to "AVCHD 1080/60i
    HA".
    2.       In the CS5 PrPro new project:
    a.       General > Capture Format: HDV
    b.      New Sequence > Sequence Preset > AVCHD > "AVCHD 1080i30 (60i)".
    3.       In Encore: File >  Project Settings > Basic:
    a.       Authoring Mode: "Blu-ray"
    b.      Transcode Settings: "Codec: MPEG-2; Dimensions: 1920 x 1080; Frame
    Rate: 29.97, Fields: Upper Field First, Audio Transcoding Scheme: Dolby
    Digital, Maximum Audio/Video Bitrate: 15.0 Mbps"
    c.       In the "Default Transcode Settings" window, the Blu-ray tab is
    highlighted. (There, I could change the codec from MPEG-2 to H.264 -
    according to some articles it would give slightly better quality in certain
    circumstances - I don't know.)
    d.      On the Encore Project Panel, right clicking on the sequences, and
    choosing "Transcode Settings" from the menu, I get a window that says "DVD
    Transcoding" and "Blu-ray Transcoding". In the Blu-ray Transcoding section,
    I choose Codec: MPEG-2, Dimension 1920x1080, Frame Rate: 29.97, Quality
    Preset: Automatic Using Project Settings.
    e.       Going into the "Edit Quality Presets", I change the "Export
    Settings Preset" to "1920x1080i 29.97 Maximum Quality" (from the 1280x720)
    4.       Now, in the Project Panel, under the Blu-ray Transcode Settings I
    see: "1920x1080i 29.97 Maximum Quality MPEG-2".
    Are these the correct settings for a high quality Blu-ray project? I am
    re-transcoding the project with these settings to see if I still get the bad
    transitions.
    Thanks for your advice,
    Laci.

  • Quicktime settings for future transcode to Blu-Ray & DVD in Encore

    Hi, I'm asking this here because I think this is where the best knowledge on the subject is. I'm making a slideshow video in Fotomagico that I hope to author to Blu-Ray and DVD in Adobe Encore. I know that it will have to be transcoded in Encore so I'm wondering what will be the best output settings when I make the original video file in Quicktime. This has been created at 1920x1080, 60fps
    Some specific options that have me confused:
    Frame rate: leave at 60 or not. From my understanding, blu-ray 1080p is 23.97fps and DVD is 29.97?
    Compression codec: Options include AIC, ProRes, MPEG-4, H-264, etc. I have no idea what will work best?
    Or, should I send a file that doesn't need transcoding? Encore calls these elementary streams and apparently they have to match Blu-Ray/DVD spec and have no audio in the file. Is there a way to make this (I assume H-264 or MPEG-2) in Quicktime?
    Thanks for any tips!!!

    Hey Hoffsta,
    yesterday i was looking for bluray edition and i found this can be usefull i hope:
    http://www.kenstone.net/fcphomepage/blu-ray_fcpfields.html
    Flo

  • Which Blu-ray players play Encore BDs?

    Other threads in this forum state that only some consumer Blu-ray players will play BD-R disks authored by Encore.  As I understand the situation, it has to do with a copy-protection code present in commercial Blu-ray disks but not on "amateur" disks burned on PC-mounted burners, and the insistence of some players, but not all, on finding that code.  In my experience BDs authored by Encore CS5 and burned on my LG BH10LS30 burner will play on a Panasonic SC-BT100 player and a Samsung BD-C5500 player, but not an LG BD390 player.
    Is there a list of which players will play BD-Rs without the commercial copy protection code?  Or is there a way, other than buy-and-try to determine this information?  A claim to handle BD-R media appears insufficient since the LG player above makes that claim but rejects the same disks played by the other two.

    Sony Outlet in Camarillo, CA.  The sales guys are on commission which probably helps.  I just told him my exact purpose and goal.
    In my case it was one player on one TV.
    I'm thinking if you just ask your local shop they would do the same (hopefully).
    Erik

  • Blu-ray authoring in Encore - importing from FCP

    I do all my post in FCP and I am shooting HDV 1080i and then want to burn Blu-ray using Encore. I tried creating a quicktime reference file and then importing it to Encore - the SD DVDs look okay (with jagged edges at times - interlaced video problems I guess) and play back fine. However, the Blu-ray wont play back (it burns fine) on the Sony BDP-S300. Any suggestions as to what might be going wrong?...My video length was 60 mins and Encoe showed the size as 8GB (which seemed a bit low for 60 mins of BD). Let me know if you have any suggestions on troubleshooting. I used the automatic settings for transcoding for now (I will customize the transcode settings once I know I get the BD to work)

    Does your Sony player have the latest firmware updates?
    Try encoding the video as Mpeg-2 in Compressor for a BluRay file, then import into Encore. It should say "Don't Transcode" under the BluRay transcode settings if you got it right. Letting Encore do all the encoding is a bad idea for both of those options. Even for DVD I would use compressor, Sorenson, BitVice, or similar encoding software...but since Compressor is free with FCP....
    Burn the disc, or burn a bluray ISO then use another program to burn the ISO to your bluray disc.
    I would suggest investing in 1 or 2 BD-REs to make this part less expensive.

  • Touchscreen Blu-Ray app in Encore.

    I have a client who wants an HD Blu-Ray for a touch screen application.  Is there a way to have navigation in a timeline because users will not have access to a remote.
    thanks

    Haven't done it, but most touch screens are computers with the touch screen acting like a mouse.  It depends on what you mean by "navigation in a timeline."

  • Encore CS3 - Blu-ray authoring - video formats?

    Does anyone know if we'll be able to use h.264 or VC-1 video formats for Blu-ray discs in Encore CS3?
    I already own some software that's MPEG2 only but would prefer more flexability (Roxio's DVDit Pro HD)
    Will you be able to do "pop-up" menus that you can have appear while the video is still playing?

    Blu Ray is not as easy as some folks think.
    Wait until you try to get these titles replicated.....you will find that only Sony can actually do the job.
    To quote from our replication company - who talked directly to Sony as they wanted to get into this:
    >the Sony guy was very open about Blu-ray production and replication - basically he says only Sony has the resources and time to devote to authoring and mastering the Blu-ray materials and the up fron costs (starting at £20,000 up front before any disc is made) mean that this is never going to be something for anyone other than the biggest media companies to get into. At least, not for the foreseeable future.
    And that is a direct quote.
    Additionally, they are also saying that Scenarist is the *only* tool they will accept content from. Still trying to find out about HD DVD replication - it is a LOT easier & cheaper to do.
    Another issue with Blu Ray is that BD-R, the recordable format, will simply not play on most set top players. only PS3 will play these.
    Finally, of course, Sony are also lying about the sales figures, as they have included PS3 consoles in the figure for Blu Ray players, which is sophistry. Most people buy PS3 for games, not Blu Ray playback. True BRD player figures are apparently well under 20,000 total.
    They are ALSO lying about Casino Royale "sales" of over 100,000
    Most of these were actually given away for free, not sold.......

Maybe you are looking for

  • How big a Time Capsule do i need, I'm totally new to Mac!

    Hi, how big a Time Capsule do I need in order for it to work as my backup? Let say if I bought an Imac with 2 TB HDD + 256 GB SSD and with that, bought a 2 TB Time Capsule for backup, would that be enough or would I need to buy a 3 TB Time Capsule? T

  • How to implement a time-limited trial version of application?

    Hello I am working on a trial version of my application for Windows Phone 8.1 Runtime. I based my code on this MSDN tutorial: https://msdn.microsoft.com/en-us/library/windows/apps/xaml/dn532253.aspx It clearly mentions here about a trial-period of an

  • How can I extend my Nokia Lumia 720 warranty

    Can someone suggest me, is it better to extend my Lumia 720 mobile's warranty. If it's good to go, can you please let me know how to extend the warranty. Thanks in advance.

  • How do I have a text link open a lightbox?

    I don't want the lightbox to be on the page but only to open if a link is clicked?  How do I do this in Muse?

  • [Solved] Dragon Gaming Center

    Here is my problem. I install DGC and cannot run it. Apllication crush in one sec. I have MSI GP70 Leopard Pro with win 7 x64 Can somebody help ? Also i cant run speed test in killer network maganer because of "not installed flash", ofc i have flash