Blu Ray Burned in Encore CS4 play audio but no video

I've burned this project multiple times and everytime I get the menus and the audio, but no video when played on a Blu Ray player. The same disc plays fine in computer/laptop. And when I tried a shorter version of the project (10 minutes vs. an hour and a half for the original) it plays fine everywhere. Could the file size be causing my disc not to play in a BD-R player? Then why would it play on a computer/laptop?

More information needed for someone to help
http://forums.adobe.com/thread/416679
Some specific information that is needed...
Build a Configuration file http://www.piriform.com/speccy
Brand/Model Computer (or Brand/Model Motherboard if self-built)
How much system memory you have installed, such as 2Gig or ???
Operating System version, such as Win7 64bit Pro... or whatevevr
-including your security settings, such as are YOU the Administrator
-and have you tried to RIGHT click the program Icon and then select
-the Run as Administrator option (for Windows, not sure about Mac)
Your Firewall settings and brand of anti-virus are you running
Brand/Model graphics card, sush as ATI "xxxx" or nVidia "xxxx"
-or the brand/model graphics chip if on the motherboard
-and the exact driver version for the above graphics card/chip
-and how much video memory you have on your graphics card
Brand/Model sound card, or sound "chip" name on Motherboard
-and the exact driver version for the above sound card/chip
Size(s) and configuration of your hard drive(s)... example below
-and how much FREE space is available on each drive (in Windows
-you RIGHT click the drive letter while using Windows Explorer
-and then select the Properties option to see used/free space)
Windows Indexing is BAD http://forums.adobe.com/thread/676303
While in Properties, be sure you have drive indexing set OFF
-for the drive, and for all directories, to improve performance
Some/Much of the above are available by going to the Windows
Control Panel and then the Hardware option (Win7 option name)
OR Control Panel--System--Hardware Tab--Device Manager for WinXP
And the EXACT type and size of file that is causing you problems
-for pictures, that includes the camera used and the pixel dimensions
Plus Video-Specific Information http://forums.adobe.com/thread/459220?tstart=0
Read Bill Hunt on a file type as WRAPPER http://forums.adobe.com/thread/440037?tstart=0
What is a CODEC... a Primer http://forums.adobe.com/thread/546811?tstart=0
What CODEC is INSIDE that file? http://forums.adobe.com/thread/440037?tstart=0
Report back with the codec details of your file, use the programs below
For PC http://www.headbands.com/gspot/ or http://mediainfo.sourceforge.net/en
For Mac http://mediainfo.massanti.com/
Once you know exactly what it is you are editing, report back with that information... and your project setting, and if there is a red line above the video in the timeline, which indicates a mismatch between video and project
Read Bill Hunt on editing a VOB/MPG file http://forums.adobe.com/thread/464549?tstart=0
Edit Vob http://premierepro.wikia.com/wiki/FAQ:How_do_I_import_VOB_files_/_edit_a_DVD%3F
Read Hunt on Using MOD/TOD files http://forums.adobe.com/thread/699990?tstart=0
Work through all of the steps (ideas) listed at http://forums.adobe.com/thread/459220?tstart=0
If your problem isn't fixed after you follow all of the steps, report back with ALL OF THE DETAILS asked for in the FINALLY section at the troubleshooting link
Also read file troubleshooting http://kb2.adobe.com/cps/407/kb407928.html
Odd Errors http://forums.adobe.com/thread/670174?tstart=0
For CS4 you must update the Roxio component http://forums.adobe.com/thread/400484?tstart=0
More on Encore and Roxio http://forums.adobe.com/thread/528582?tstart=0 or direct to
http://kb.roxio.com/search.aspx?URL=/content/kb/General%20Information/000070GN&PARAMS
As well as the below, right click the Encore icon and select Run as Administrator... which is NOT the same thing as running the computer with the Administrator account... and which fixes several "odd" problems
Run as Administrator http://forums.adobe.com/thread/771202?tstart=0
Long File Names or odd characters cause problems
Read http://forums.adobe.com/thread/588273
And #4 http://forums.adobe.com/thread/666558?tstart=0
And This Message Thread http://forums.adobe.com/thread/665641?tstart=0

Similar Messages

Flash player 11.6.602.180 plays audio but not video...

Very similar to problems reported by others. Just started recently... flash player on Win 7 and IE 10 plays audio but no video... just black box or blank.
Have reinstalled flash player several times... including following all clean install instructions several times. Installation completes and and tells me it's installed successfully.
Have carefully matched IE settings to allow activeX content and have enabled the flash player object and turned on active scripting for all zones, etc. Still no video.
Going to the flash verification page shows a blank box where the current installed version should be.
If I look in control panel under Flash Player it tells me the activeX version is 11.6.602.180 and that the plug in is "Not Installed"... could that be the problem?
What can I do to fix this? Thanks in advance for any help.

What is your display adapter, device driver version and date? See http://forums.adobe.com/thread/945765

HT204291 Plays audio but no video sometimes

Can someone help with my apple tv 2 playing audio but no video sometimes. The icon comes up in the bottom corner the same as when I play a song and the video does not come on once Ina while.

paulfromrivercity wrote:
Is that because AirPlay will not do streaming videos, just ones already loaded on the device?
It's as clear as mud but the explanation is here. My interpretation is that it's a licensing issue.
AirPlay DOES do streaming videos. Crackle is one example. Netflix is another but, in the case of Netflix, there is no need for an iPad/iPod.

Transacoding Blue Ray project in Encore CS4 gives error!

I am transcading a high def (AVCHD) project fo a Blue Ray image on my hard disk.
The transcaoding runs for about 6 hours and when done it gives me the following error:
Blue-ray Error:"device not ready", Code:"3", Note: "File can not open.(G:\MyDojo\cruise to alaska-2010\AuthorScriptHDMVSessions\-sessionFile_Asf-session_1_video.m2v.ves) -
The path is a valid path and the file exists.
Every time I try to rebuild, not having exited Encore, results in same error within seconds. Exiting Encore and re-building, starts the whole loooong process over.
Any ideas? Please help.
NOTE: I used this method once before and it worked just fine.
Running CS4 on a Vista Ultimate w/8GB Ram, plenty of disk, DELL XPS720.

Some reading, and fixes if you have not updated
Encore CS4 Roxio component problem http://forums.adobe.com/thread/400484?tstart=0
More on Encore and Roxio http://forums.adobe.com/thread/528582?tstart=0 or direct to
http://kb.roxio.com/search.aspx?URL=/content/kb/General%20Information/000070GN&PARAMS
Long File Names Cause Crashing http://forums.adobe.com/thread/588273
And #4 Here http://forums.adobe.com/thread/666558?tstart=0
And This Message Thread http://forums.adobe.com/thread/665641?tstart=0
Encore Tutorial http://www.precomposed.com/blog/2009/05/encore-tutorial/
Things and Software to AVOID when authoring/burning a DVD
Read all links/sub-links to create a "best" burned disc
Start --> http://forums.adobe.com/thread/608660?tstart=0
#2 has WHY Explained http://forums.adobe.com/thread/607390
Plus a Microsoft note http://support.microsoft.com/kb/314060
And another note http://support.microsoft.com/kb/982116
http://forums.adobe.com/community/encore/encore_faq

Burned dvd plays audio but not video

I just completed the first part of a wedding video and it burned fine. I just finished the second part and it looks and plays fine in imovie and idvd preview. However when I burn it and try to play it the dvd will only play the audio. the dvd starts like it's going to be fine, but the video stalls on the first frame and the audio continues. does anyone have any suggestions. I am trying to avoid starting over, but I don't know what else to do. I tried eliminating the first clip in case it was corrupt, but that didn't help.

First thing you might do is in iDVD, use the menu option to "Delete encoded assetts" in case the previous garbage from the last project or burn is messing things up. If that doesn't work here are my standard list of things I do when I have issue or even just before I go to burn a new project...
Run Cache Out X (free download) to clear all system and application caches.
Run MacJanitor (free download) to do all the Unix Cron Maintenance scripts.
Run Disk Utility (Applications -> Utilities) and repair disk permissions on your start up drive (typically your internal drive). Also verify any other drives mounted on the system.
Run Preferential Treatment (free download) to check for corrupt/damaged application and system preference files.
Reboot your Mac.
Patrick

Clicking on Transition and Title browsers causes '11 iMovie crash and projects/events play audio but no video

After several years of working fine, my old iMovie started acting funny. Clicking on the Transition or Title browser would cause it to shut down. I just bought/downloaded the "upgrade" to '11 iMovie, 9.0.4, yesterday, and now, not only does it still do the same thing, but the projects or events won't play any video portion, only the audio.
I'm running 10.6.8 on an iMac

I seem to be having the same problem. I'm running a mac mini and I have like 5 photos, 1 song, and 2 movie clips (not a lot of stuff) in the movie, and when i go to preview it... I see the pictures, and hear the music... but no video.

.MOV files play audio but no video

hi, does anyone know why that when i open a .MOV file from my digital camera in quicktime, the audio plays fine but the picture however is a fuzzy green and purple mess? i have tried re-installing quicktime and everything but it makes no difference. do i need a new plugin for .mov files? the video plays fine in realplayer, but i would like to be able to open it in quicktime for realplayer tends to jump and freeze quite a lot.
any help would be most obliged!
Sam

Yes, this fixed my problem too.
The problem appears to be that Quicktime for Windows is set to require DirectX support as the default and my Toshiba Tecra M2 notebook with NVIDIA GeForce FX Go5200 32M/64M discrete video adapter probably doesn't support that.
Quicktime Preferences (Advanced tab)
========================
Safe mode (GDI only) <-- works, displays video correctly
DirectX <-- video scrambled, brown/purple/other colors mess, but audio works
Enable DirectDraw acceleration
Enable DirectDraw on secondary monitors
Enable Direct3D video acceleration

.mov file plays audio, but no video on win7

A friend sent me some .mov files he recorded with his camcorder and loaded onto his mac. I have tried viewing them on my win7 machine using quicktime, windows media player, and vlc media player. On the first two the audio plays, but no video displays. the vlc player says:No suitable decoder module:
VLC does not support the audio or video format "m2v1".
Has anyone else seen / worked around this?
Thanks,
Paul

Ask the Mac author to use "delivery" codecs like H.264 video and AAC audio instead of the iMovie editing codecs.

QuickTime Plays Audio But No Video

For the past few days everytime I play an mpg or mov on my QuickTime Player (7.3), I hear the audio but instead of seeing any video, there's only the native aqua gray screen. This not only happens with downloaded mpgs or movs on the Internet, which
plays fine in whatever browser I'm using, but also with mov files I've made myself with Final Cut Pro.
I've already researched similar problems within this forum from the past few months and I've tried various suggested solutions, like trashing the QuickTime preferences, restarting, repairing permissions, but nothing has changed. I've also gone into QuickTime preferences>advanced>mime settings, checked the "video" box, clicked okay, and restarted, but when I drag a mov file onto the QuickTime icon in my dock, the SAME THING happens, audio without video.
This hasn't affected anything within FCP, but I can't see any of my files in QuickTime. The only thing I did lately was install a third party program to change the look of my iTunes interface, but I completely trashed my iTunes program, all related files, including my music library, and reinstalled them from my backup drive, in case that affected QT.
Any ideas?
Jeff

For the past few days everytime I play an mpg or mov on my QuickTime Player (7.3), I hear the audio but instead of seeing any video, there's only the native aqua gray screen. This not only happens with downloaded mpgs or movs on the Internet, which
plays fine in whatever browser I'm using, but also with mov files I've made myself with Final Cut Pro.
I've already researched similar problems within this forum from the past few months and I've tried various suggested solutions, like trashing the QuickTime preferences, restarting, repairing permissions, but nothing has changed. I've also gone into QuickTime preferences>advanced>mime settings, checked the "video" box, clicked okay, and restarted, but when I drag a mov file onto the QuickTime icon in my dock, the SAME THING happens, audio without video.
This hasn't affected anything within FCP, but I can't see any of my files in QuickTime. The only thing I did lately was install a third party program to change the look of my iTunes interface, but I completely trashed my iTunes program, all related files, including my music library, and reinstalled them from my backup drive, in case that affected QT.
Any ideas?
Jeff

QuickTime 7.5 Plays Audio but no Video on .avi file

Found a good clip to use in a classroom setting, but it is .avi. I updated QuickTime to 7.5, but still only plays audio - no video whatsoever. Any ideas? Thanks!

Install Perian on the computer; if it doesn't work, choose Show Movie Properties from the Window menu and check the video format. An AVI file may contain audio and video of any format, and some formats cannot be used on Mac OS X.
(32823)

Front Row plays audio but not video of MP4 H264 AAC files

SL 10.6.6
Here's the problem:
Take an MP4 movie file encoded with H264 and AAC thats plays with no problems in QT, iTunes, Front Row
Open this file in QT7Pro, add a mask using a GIF file then export as MP4 using video and audio pass through to avoid re-encoding
The new video file plays OK in QT and iTunes but only plays the audio track in Front Row - the video is just presented as a blank screen
This happens to every file i've tried it with.
I've tried trashing all front row caches/prefs/app support folders, installing/uninstalling/re-installing perian. i've tried changing the file extension to .mov .m4v .3gp - still the same problem the file plays perfectly except in Front Row
All the posts I can find on this topic seem to refer to subtitles causing a problem - these files have no subtitle track
Any suggestions?

I have faced the same problem exactly. Some seasons and one movie I have detected so far, do not show any video at all. If I open the same files in iTunes, they show ok. If I open the same files in QuickTime thought no video also. I guess it has something to do with QuickTime then. Try it yourselves in order to see if it is the same problms with you guys. If that is the case I will try to extract an older version of QuickTime from the installation package via Pacifist and see if that works.
Even if it doesn't work I am pretty sure they will come up with a new update fixing this, but the point is that Apple isn't used in making bugged updates, up until recent. What is wrong with them lately?
Anyway, as soon as I have news in the afternoon I will let you know

Adobe premire CC will play audio but not video

Hello guys I'm having an issue i recently upgrade my pc and added a second video card I have two amd readeon r9 290 with crossfire enable. Last night after installing both video card I ran premire and it would show the thumnail of my video but when i played it back only the audio would play but not the video.
Pc specs
Cpu: amd fx 8350
Motherboard sabertooth 990fx r2
2x readon ati amd r9 290
Thanks in advance for the help

http://docs.info.apple.com/article.html?artnum=302828

.m4b files play audio but no video in QuickTime

I recently upgraded to Lion, after which QuickTime no longer displays the video with my .m4b files. It plays the audio fine, but none of the video slides that are in the files. I spent time on the phone with tech support, and all they could suggest was using another media player such as VLC. But that doesn't answer the questions as to why QuickTime no longer plays the video in .m4b files. Does anyone else experience this?

I have found the solution - forget about QuickTime, use NicePlayer,
Download NicePlayer for Mac - Play DVDs and QuickTime movies. MacUpdate.com

Chromebook flash player works except at IMDB, plays audio but not video for movie trailers.

Using Flash version 15.0.0.189.
14 q039 Chromebook
I have been using my new HP Chromebook for a couple of weeks now. Very trouble free and fast, with little bloatware. This leaves me with time to pursue funny little inconvenient glitches like trying to figure out why I have audio and a black video screen in native (small) and full screen modes at IMDB (Internet Movie Data Base). Yes, I tried their FAQ and the Adobe FAQ without a resolution.
I am an old mouse who knows that somebody above the maze that I am in, will know exactly where the cheese is.

I'm having the same problem on both windows and mac OS. This seems to be a bug because QT 7.6.5 plays them fine on either machine, but QT 7.6.6 does not. I have over 2000 files encoded using h264 which played perfectly before the upgrade. I tried logging in under a different user which does Not work. I notice also when I view them in the finder window there is no poster frame, only the letters MPEG4 under the quicktime logo
I hope this is an easy fix. I don't want to re-encode all those files and upload them to my web gallery.
Help!
Thanks

Project plays Audio, but not Video

I was working on a video project and opened *Precision Editor* on a transition. After editing the transition, the clips won't play the video, although the audio in the project plays just fine. This has affected all clips in the project, as well as all the other movie projects in the library that I was not working on at the time.
All the videos still play fine in the event library, it is just the project area that has this issue. After this occurred, I downloaded the iMovie update, but that hasn't fixed the problem, so I tried to reinstall from the disk, still no luck on fixing the issue. Any thoughts on what I may have done here?

As I posted today, just noticed this as well. Imovie worked just fine about 2 weeks ago.
http://discussions.apple.com/thread.jspa?threadID=2298823&tstart=0
can someone merge these posts? It seems like a recent concurrent issue.

Blu Ray Burned in Encore CS4 play audio but no video

Similar Messages

Maybe you are looking for