Blu-ray creation causes windows blue screen crash

I am testing Premier Elements 7 for the creation of best quality DVD and Blu ray disks. Source is AVCHD 1920x1080i and I have managed to create a number of DVD's and one Bluray without problem. My latest trial creating a Bluray disk failed at about 98%, burn in progress with a Device Error message. This resulted in a blue screen windows crash. Far more worrying is if I re-insert that BD RE disk back into my PC to erase it and try again, it immediately prompts a Blue screen windows crash, so I guess the disk is ruined. I have previously used Premiere Pro, Ulead and more recently Cyberlink Power Director and Sony Vegas. The quality of the DVD footage produced by Premier is far superior and the Bluray output was also excellent. Cyberlink has proved to be a good package appart from the poor quality of re-rendered output. Sony Vegas Pro seems the only one to recognise raw AVCHD footage and opt not to recompress it!!! The Movie Studio version doesn't appear to do this, however, I have only had a limited go at the trials. I had narrowed my choice to upgrading to Adobe Premier, or the cheaper Elements 7 which suits my requirements for home movies, however, a major windows crash, which I tend never to get has got me running scared. Why o why is there not a burn to hard disk option for Bluray creation as for DVD? Has anyone experienced a similar problem - any ideas as to what I could try?

A BSOD situation normally indicates something is wrong systemicly with the computer. It can be either software (usually OS), or hardware related.
The first thing that I would do would be to gather all info on your system and list full OS, version, updates, etc., and all hardware specs. Something in those lists might provide a clue.
Next, I'd look carefully at Event Viewer, especially at the System and Applications tabs. Look for yellow warning messages at the time of the BSOD, and especially the red error messages. It might be easier to invoke a BSOD, so you will know the exact time and date of the crash. Study each yellow and each red message carefully. Many might not yield much useful info, but some might tell you a lot of about what is happening, and may even give you the cause. Please explore every link that is offered in each of these messages. They should take you to either the MS site, or to the site of a software, or hardware company. These will likely be where you'll gather the most important data.
Here's what to look for in Event Viewer:
Give us any details found there.
Also, see this LINK. The video is a bit long, but will furnish you with a lot of troubleshooting tips, and also tools from MS. Make notes of these tools and their use.
Good luck,
Hunt

Similar Messages

Best Way to Play Blu-ray disc/Blu-ray ISO on Windows 8

Nowadays, almost any computer can play DVD movies as long as there is a DVD drive provided, whatever it's a PC or Mac, homemade DVD or commercial DVD. But what about Blu-ray movies? Could your Windows 8 PC play this high definition movie formats without fuss? How to play Blu-ray on PC with Windows 8 system? This article will tell you the best way for playing/watch Blu-ray discs or Blu-ray ISO Files on Windows 8.
In order to watch Blu-ray discs or BD ISO on Windows 8, you must have three things: 1) a Blu-ray disc drive, 2) a Blu-ray movie, and 3) Blu-ray Player Software(Need decrypting Blu-ray function). It is this third one – software – that causes the majority of problems for Blu-ray users. The free player like Windows Media Player, VLC Player, etc don't have Blu-ray decrypting function and not support playing Blu-ray movies. So this Blu-ray Player for Windows 8 from UFUSoft will be the best solution for you.
Follow the following steps to Play Blu-ray discs or Blu-ray ISO movie and media file on Windows 8:
Step 1: Connect the Blu-ray driver to your Windows 8 PC via a USB connection. The USB of the driver should be above 2.0.
Step 2: Free Download the Windows 8 Blu-ray Disc/Blu-ray ISO Player and then install it.
Step 3: Insert your Blu-ray disc into the Blu-ray driver. Next, open your Blu-ray movie by just pressing the “Open Disc” in the main interface to select Blu-ray drive and then click "OK" button to load the Blu-ray directly. You can now enjoy your Blu-ray movies on Windows 8 PC.
Another option is to load Blu-ray folder, you can click "Open File" button to directly select the Blu-ray folder and click "OK" button, now you can watch the Blu-ray movie on Windows 8 PC.
Step 4: Stop the playing the Blu-ray movie on Windows 8. If you want to stop playing the Blu-ray disc, you only need click Stop Button and eject the Blu-ray movie.
Tips:
1. When you want to play the Blu-ray ISO image file, you need to load Blu-ray ISO image file to the virtual drive firstly, the open method is the same with loading Blu-ray disc.
2. While the video is playing, click the "Snapshot" button to take a picture from a video. Click Open Snapshot Folder to find the captured picture. You can choose the snapshot format and the snapshot folder in the Preference window. And also you can choose the image format like JPEG, PNG, BMP.
3. When playing Blu-ray disc, you are allowed to choose the specific title/chapter in the "Controls > Title/Chapter" column to play.
Hope this way could help you have no problem to enjoy Blu-ray disc and Blu-ray ISO files on Windows 8, more info please enter: Play Blu-ray disc/Blu-ray ISO on Windows 8 PC.

I am sorry to say that you cannot play Blu-ray movies on any Mac. Whether any of us agree or disagree with this, it is the way of things currently. One can rip Blu-ray movies to a Mac, and play them without menus or extras, but this is illegal and it is a violation of the terms of use of these forums to discuss.

Does Premiere or Encore allow me to play back blue ray discs on Windows 7?

Do I need additional software to play back a blue ray disc on Windows 7 when I have the Production Suite?

Yes. PrPro is not a BD "player," but a video-editing program.
There are several good ones available for the PC, and I recommend MediaPlayer Classic HC (free).
Good luck,
Hunt

Starting Firefox in Private mode from the pinned ico in taskbar causes Windows Explorer to crash.

Starting Firefox in Private mode from the pinned icon in taskbar (right click, choose "New Private Window") causes Windows Explorer to crash almost everytime, but not always. Very odd.
Didn´t happen with previous versions of Firefox.
Firefox 22.0, Win 7 Ultimate with all updates applied.

Hello Paul,
That's a very odd behavior indeed. All I can think of is that an add-on is confused and makes Firefox crash. The Reset Firefox feature can fix many issues by restoring Firefox to its factory default state while saving your essential information. Note: ''This will cause you to lose any Extensions, Open websites, and some Preferences.''
To Reset Firefox do the following:
#Go to Firefox > Help > Troubleshooting Information.
#Click the "Reset Firefox" button.
#Firefox will close and reset. After Firefox is done, it will show a window with the information that is imported. Click Finish.
#Firefox will open with all factory defaults applied.
Further information can be found in the [[Reset Firefox – easily fix most problems]] article.
Did this fix your problems? Please report back to us!
Thank you.

Difference between Blu-Ray 2.64 and Blu-Ray DVD

Hi all,
I am trying to make Bly-Ray DVD from my Canon XL-H1 as well as Canon 5D MII, which setting should I choose to export form Pemiere CS5?
Blu-Ray 2.64 or Blu-Ray DVD, what is the difference between the two any way/
Many thanks in advance
Mitchell

Harm,
Thank you for the quick reply, I sorry, I meant when I am using AME and Premiere CS5 to encode a project for Blu-Ray Disk should I use H.264 Blu-Ray or MPEG2 Blu-Ray, what is the difference and which one is better?
Thank you again
Mitchell

"Fixes a bug that could occasionally cause a home screen crash"

After updating to 7.1 still I am facing the issue "Fixes a bug that could occasionally cause a home screen crash". Is any one facing the same?

tl;dr version: it's glitchy and slow, it freezes and lags especially when typing, it isn't a hardware problem, and it's awful.

Exporting HD video to Blu-ray format causes motion blur

Using Premiere Pro CS4, I have HD video projects that are either 720p30 and 1080i (60i). The 720p video is 1280x720 (1.0) 60fps. The 1080i footage is 1920x1080 (1.0) at 29.97 fps.
For exporting the video to a format suitable for burning to Blu-ray (using Encore) I've am using the MPEG-2 Blu-Ray format using either the HDTV 1080i High Quality or the HDTV 720p 59.94 High Quality presets, depending on the format of the original video that I'm compiling.
I didn't notice it at first but when I burned first my test Blu-ray disc I found that the video was having some wierd exaggerated motion blur characteristics going on. Any abrupt movment, such as a person turning their head or a video box shrinking from full screen to half screen would be wildly blurred. I thought it might have been a result of the burn but I subsequently found the problem was introduced during the video export process in Premiere Pro. I just didn't catch it because I wasn't looking closely enough.
Because I am using the default settings for the two presets cited above I'm at a loss about what is introducting this blur or how to go about mitigating it. Anyone got any tips? What could be having such a problem making motion which shouldn't blur too much blur so badly? Thanks in advance for any assistance.

Ok, I'm stumped for the moment. To better illustrate what's going on I'll post some pics of the problem. I'm using a piece of video that's not part of my projects but it does illustrate what's going on pretty well.
The first is what Premiere Pro is displaying for the source video. I'm currently using a Sequence Preset of DVCPROHD 720P 60P even though I don't have the hardware for it. The reason being is it stopped the blur from happening in the timeline and I think that's because this preset had a 59.94 fps preset and the source video was 60fps.
http://www.imagebam.com/image/7bd0af110335520
The second is a Premiere Pro frame grab of what the source video file looks like. I'm using an export of Windows Bitmap with a preset of HD Square Pixel Bitmap 720p. I'm using the Progressive setting because if I choose either Upper or Lower first the image looks even worse.
http://www.imagebam.com/image/9aa895110335495
The third is a Premiere Pro frame grab of what the exported video file looks like. The video was exported using MPEG Blu-ray with a preset of HDTV 720p 59.94 High Quality with no modifications. I'm using an export of Windows Bitmap with a preset of HD Square Pixel Bitmap 720p. I'm using the Progressive setting because if I choose either Upper or Lower first the image looks even worse. Incidentally, this exported video displays in the Premiere Pro timeline with visible motion blur characteristics whereas the source video did not.
http://www.imagebam.com/image/3a2a60110335483
What these images show.
1) The source video displays crisp in Premiere Pro even though this is footage of a video transition.
2) The source video exports out with some motion blur.
3) When you do a frame grab of the exported video the motion blur of the exported video increases.
As I said, I'm stumped. I've tried modifying every setting in the exporter for MPEG Blu-ray with a preset of HDTV 720p 59.94 High Quality and I can't stop this blur. I looked at the H.264 Blu-ray setting but it appears useless. Every time I try to export, the exported video crashes Media Player and when I load it into Premiere Pro I see the video now has motion blur.
At this point I'm wondering if upgrading to CS5 will make a difference or not. That's about the only thing I can think of that I haven't tried yet.

Qosmio x775-3dv80 Blu Ray/DVD burning gets Blue Screen of Death.

I just got a new Qosmio X775 3DV80 laptop.
Tried to burn a Blu Ray movie with DVDfab 8. The process went through all the way till the very end and then I get a blue screen of death every single time. the brief error says IRQ problem. burning DVD gets the same.
a friend as a same model laptop. tried on his with the same result.
So it's not my particular machine!
i installed a copy of Windows 7 Pro on the sencond HD. burning either DVD or Blu Ray with no problem.
it suggests there's a glitch with combo of the original Windows 7 and the Blu Ray drive.
i have not contacted Tosh yet.
Anyone else experience the same???

Peter, thanks for your suggestions. I tried so and didn’t work either however. I compared the drivers for the blu ray disk between the preinstalled Windows 7 version and my Windows 7 Pro (works as my first post). The only difference is the former has two drivers: (1) cdrom.sys, and (2) tdcmdpst.sys. (the Windows 7 Pro has only one : cdrom.sys). It seems this model shares the a common problem, but not enough users with the app combo to stir up some waves… Additionally: Between my first post and this one, the screen acted up. It would go black and came back in 2 sec with full brightness. The current app would freeze and brightness control function stopped working. Happened in random and a few times within an hour. Got a replacement from Amazon where I bought it (same blue screen problem on this one, too). Two weeks or so later, the 3D function went out on the new one. Today, the wireless function went south… am I "lucky" or crap on Tosh’s side?

Blu-ray creation on Mac? Surely so....

I'll try to ask this in a very straight forward way - I'm not looking for any step by step instructions, just general advice, and links to any other appropriate and knowledgeable sites or articles will be greatly appreciated.
I'm using a recent, fast 27 in iMac (March 2010), core i7 processor with 8 gigs of ram, OSX 10.6.5. Currently having great success with CS4 versions of PPro and Encore, having good luck burning SD DVDs. Am shooting 720p footage with a Canon T2i, and have been able to produce nice looking down-sampled DVDs (thanks to reading other forum discussions on here on the topic, with a great link to an excellent tutorial specific to CS4 PPro.)
I just bought the CS5 upgrade to everything, but honestly am a little hesitant to install it just yet. I've been offered a "dirt simple" (I know - famous last words) video job for a client and think I should probably stay with a workflow that I know works. They only want a <10 min DVD that will continuously loop on a small LCD-TV at the back of a trade show booth - so my widescreen DVD process, down from 720p HD, works fine, even better than I expected.
But it makes me want to try to produce true Blu-rays disks, especially since I'm so impressed with what Canon DSLRs can shoot, and PPro handles the format so easily - I understand it does an even better job in CS5.
So here finally is my question(s) - I'm looking for an external Blu-ray burner that will connect to this iMac via Firewire, and can be written to by the Mac version of Encore, CS5. Surely this is all possible - right?? I've seen lots of internal units intended mainly for windows, and I think one possibly discontinued internal for Mac Pros.
So - is there such a beast - an external Firewire burner for Mac? And - will Encore CS5 for Mac be able to produce a simple Blu-ray disk (a simple menu with buttons, no extra features or 3d or anything extravagant)? And is Toast a better or lesser option? I do fully realize that OSX cannot play a Blu-ray disk, so I know I'll need a true Blu-ray player hooked up to an HDTV.
THANKS for any advice!

Any external Blu-ray burner should work on Mac. Talk to these people:
http://www.macsales.com/
I bought two external and two internal drives from them for my company's Macs. No drivers included or needed.
Regards,
Larry

E3000 Bizarre Issue... WIRED Blu-Ray Player Causes WiFi To Be Disabled

I have had numerous issues with my E3000 since I got about two months ago and they have all been resolved with the exception of this new one that popped up today.
My Samsung Blu-ray player is connected firectly via ethernet cable to the router. When it's on, I lose all conenctivity to the router with my wireless devices including three PC's, a PS3, two iPhones, one iPad, one Samsung Smart TV, one XBOX 360 and an Onkyo Receiver. When I say that I lose connectivity, I don't mean that I lose access to the Internet. My PC's see the network but cannot connect to it, the same goes for the Apple devices. The moment I shut off the Samsung BD player it kicks right back on and works normally. Until today, this never occurred.
I contacted Tech Support and they had never heard of this happening before. They suggested that I change the ethernet cable which I did while the unit was on and it worked until I turned the BD player off and turned it back on again. I also tried switching ports to no avail. Alos all of the software is up to date on both the router and the BD player.
Does anyone have any ideas about this? I'm going to call Tech Support back on this again but I thought I'd check here first to see if anyone else has had this issue.
Thanks in advance.

Well, try the following steps:
A] With the help of Cisco Connect Software (if at all you have installed the router with the help of this software)
          1] Open the software and go to the option which says "Router Settings"
          2] Then click on the option which says "Advanced Settings" which will take you to the router's configuration page.
         3] Lower the MTU (Maximum Transmission Unit) from 1500 to 1400 or less (usually found on your router's main/ basic setup page)
         4] Then go to the Wireless tab, keep network mode as mixed,
For Channel Settings of 2.4 GHz you can make Channel Width to 20 MHz only and Channel to 6, 9, 11..
For Channel Settings of 5 GHz you can make Channel Width to 20 MHz only and Channel to 40 or 161...
B] If you haven't installed Cisco Connect then you can log on to the router's user interface using it's default IP address in the browser which is 192.168.1.1 and type in 'admin' as the password leaving the username field blank. This will take you to the router's web interface and then follow steps as mentioned above to make the changes.

Desktop software causes Windows 7 to crash

I have been using Desktop Software for ages now, very successfully on the Windows XP Pro platform. I have now changed to Windows 7 Pro. Although I have downloaded and installed the latest Desktop software build, which is supposed to be Windows 7-compatible, it is certainly not on my machine.
What happens is this: When I first install the Desktop software, and start it, and use it to sync with Outlook, it works fine. Eventually of course I shut down the computer at the end of the session.
The problem occurs when I next trry to boot up. Every time I do this I get a blue screen crash long before any welcome screen appears. The blue screen doesn't last long enough for me to read what it says but the effect is clear - no boot until a repair of some sort is done. I have found that the only way to achieve a successful boot after this is to take the repair option and then the restore option to a time before installing the Blackberry Desktop software.
This has happened so many times now, with other software and hardware being installed at different times perfectly successfully. Only Blackberry Desktiop software causes these crashes. I have gone through this process at least a dozen times now, all with exactly the same effect.
Does anyone have any idea what might be going on here?

ive recently run into this problem as well with windows 7 on my gf's pc. both got 9700 bold's mine worked out fine with vista, but her comppy wont boot. bout as far as i can get from school is to walk her through booting into safe mode to uninstall the bb app til i can get home lol.. kinda screwwy that i cant really find much useful information about it in the past hour or so
about the only thing that has shown up was a 'problem signature 07' screen saying badpatch.. apparently no decent error code to lookup.. help!

IPhone causes Windows XP to crash when connected

Connecting the usb adapter from the PC to the iPhone causes a blue screen of death (BSOD).
Originally, I connected the iPhone to my Dell XPS m1210 and iTunes 7.3 to activate. Activation was seamless. It immediately recognized the iPhone and didn't cause any problems.
After activation, I disconnected the iPhone. When I reconnected it (literally plugged in the cable), my Dell started to recognize the device. Then it went directly to a BSOD. The BSOD doesn't contain the name of any file. Microsoft error reporting says the file is corrupted, so it can't analyze the problem. The problem happens again and again.
Since then, I have restarted my computer a few times, reinstalled iTunes twice, updated my usb drivers, all without any success.
Has anyone else experienced the problem? Anyone have any ideas on how to fix it?
Dell XPS M1210 Windows XP

The BSOD reports:
Stop: 0x0000007E (and stuff here)
Let's try getting a minidump to the Apple Engineers for a look.
To set up your machine to capture a minidump, right click on "My Computer", select "Properties", select the "Advanced" tab, select the "Startup and Recovery" Settings button, select "small memory dump" from the popup. When it crashes, look for the MiniDump file. It's usually in the folder "C:\WINDOWS\Minidump" and is called something like Mini<number>-<number>.dmp.
Generate the crash, collect the minidump, and send it as an attachment to this email address
in the email to Roy, be sure to include the following information:
- A link to the thread on Apple Discussions where the issue is being discussed
- The username you are using in the thread
- The version of iTunes you are using or trying to use
- the version of Windows you are using (mention service packs)
- A concise description of the issue you are seeing
- The exact text of the error message you are seeing

My Blu-ray drive will play Blu-rays but won't recognize DVDs or CDs

Hi I have a Pavilion dv6 recently had a problem and I restored it back to factory settings. Thing is before I did this I tried making recovery discs. It made it through the first, then half way through the second, but said the second one was full then when I tried to put another disc in it wouldn't recognize it. I took the comp back to factory settings, but the problem still persists. My Blu-ray play is the HP BD-ROM BDCTD03HA . I am running Windows 7 Pro 64-bit. I can provide any other info if needed.

I forgot to mention I have tried just about everything and so far nothing has worked. Please I just want my dvd player back!

Iphone causes windows XP to crash

Whenever I plug my Iphone into the USB, I get an instant reboot.
Itunes 9.0.2.25
Windows XP pro SP3
If I uninstall Itunes, the phone is recognized by Windows and no crashes occur. With Itunes installed, as soon as I plug in my Iphone...the computer reboots.
This is a fresh xp install, all drivers are up to date.
I ran the diagnostics on Itunes, and of course..I can't plug in my Iphone to check connectivity. As soon as I do, it causes a reboot.
Ran Apple Software update and nothing else is available for download.

Any photos in your camera roll on the phone? More importantly, any that were emailed to you or downloaded through safari? If so, try deleting them.
Also, read through this article to verify that the iphone driver/service are installed properly:
http://support.apple.com/kb/TS1495
Also, I don't use windows, so don't know exactly what image capture program is used in XP, but try making sure that whatever program that is is set to do nothing when a camera is attached.

Ejecting iphone causes Windows Explorer to crash

Hi Guys
After I've synced my iphone in itunes when I eject or remove the iphone from the dock Windows Explorer always "crashes", well it restarts and windows says there has been a problem.
I've got the latest updates for both iphone and itunes. i had the same problem with vista as well (I know I know!).
Any ideas about how to prevent it? Its not terminal just a bit of a pain.
Thanks in advance

I don't think that this is an iPhone issue. My wife uses Vista and a 3GS and doesn't have the same problem so my guess is that it's a PC config issue.
Have you tried posting on a PC forum?

Blu-ray creation causes windows blue screen crash

Similar Messages

Maybe you are looking for