Blu-ray error: "device error", Code "3", Note: "AS_StorageError = -97064

Hello,
I am becoming increasingly frustrated with Encore as it now seems that I cannot burn a bluray to a disc. I would love to be able to talk to someone in support at Adobe but that does't seem to be an option. I have attempted to burn a video that is 18.45GB (transcoded) to a 25GB BD-R disc with the following error received on both attempts:
"Blu-ray error: "device error", Code "3", Note: "AS_StorageError = -97064"
I don't understand this error because there should be plenty of room on the disc? I also had an issue a few weeks ago with Encore preventing me from burning a 20.4GB transcoded movie onto a 25GB disc. This may be unrelated and I am aware of the issues in Encore regarding the calculation of file size, but why am I now experiencing issues all the sudden?
My configuration:
Mid-2012 MacPro
OSx 10.8.5
Adobe Creative Suite CS5.5 (Encore CS5.1)
Internal MCE Technologies Blu-ray burner
I appreciate any help and support!!

The Code 3 AS_StorageError comes in many variations.
Google: encore "AS_StorageError=-97060" and you'll find a bunch issues. Now replace the 97060 with your specific code (97064) and you'll see there are no finds other than your thread.
These all appear to have physical storage, hard drive, or media issues. Keep in mind that for Blu-ray especially, Encore uses a huge amount of temporary storage.

Similar Messages

Blu-ray error device error code "3" create sequence fail to write m25 file

Continue to get this error message when outputting to blu-ray, can burn to dvd just fine. It seems I have experienced this issue in the past but don't recall how I resolved.
tried re-saving to new file name.

I found 3 other discussions... one of them may help
Re: Blue ray Error - "Device not ready", Code:"3", Notes - Any ideas what this means?
Blu-ray error: "device error", Code "3", Note: "AS_StorageError = -97064
Blu-ray Error: "divide error", Code: "3", Note: "AS_StorageError = -97060

Adobe CS5 error Build .iso - Blu-ray Error: "device error", Code: "3", Note: "File can not o

Hi am trying to create a bluray image .iso i loaded the gritty submenu and modified it and am getting this error
and when i try to build it it giving me this error
Blu-ray Error: "device error", Code: "3", Note: "File can not open.(/Volumes/Mac HD1/Adobe Encore Projects/BD/AuthorScriptHDMVSessions/Gritty Noir Submenu HD_mm_1.m2v.00_00_00_1.1.1_UTC.ves) -
Anybody encountered this problem? Thanks I appreciate it.

Hi,
Remove the all the files from
/Volumes/Mac HD1/Adobe Encore Projects/BD/AuthorScriptHDMVSessions/
This will resolve this issue.
This happens if any file corrupted in Volumes/Mac HD1/Adobe Encore Projects/BD/AuthorScriptHDMVSessions/ folder
Thanks,
Pankaj Gauba

Blu-ray Error: "device error", Code "3", Note: "CreateStcSequence: Fail to write M25 File.

I keep getting this error message about 11gb into burning a 22gb Blu-ray. "Blu-ray Error: "device error", Code "3", Note: "CreateStcSequence: Fail to write M25 File." I have tried just about everything from running as administrator, starting a new project and changing the disc too. I am using CS6 and going crazy... any ideas?

Hi,
First try to create Bly Ray Image Under option 'Output" Select BluRay Image, and also select the destination to create Image and click on Build, It will create a BluRay Image with extension of .iso. Now to burn BluRay Disc, you need to Select BluRay Disc under 'Output' Option and Below under 'Source' Option select BluRay Image instead of current project and Select the destination where you have put .iso Image, Then click on Build and it will burn BluRay disc.
In simple , First create an Image then Burn that image to BluRay .
I hope, it will help you.
Thanks

Blu-ray Error: "device error" Code: "3", Note: "AS-StorageError = -97060

I just wasted 2 Blu-Ray discs trying to burn a project. I was trying to burn a very simple project: a two-chapter Blu-Ray with two 55 minute episodes of a TV show on it. I have used the exact same computer recently to do exactly the same job with success, so I don't know what the problem is.
There are no menus in the project: it's just a bare-bones auto play disc with stereo sound only. The disc shows 24.37 GB used on a single-layer BD.
The files are conformed and as the build begins, the following error pops up:
Blu-ray Error: "device error" Code: "3", Note: "AS-StorageError = -97060
System info:
Windows 7 Professional
Service Pack 1
Intel i7 8 cores @ 2.80 GHz
12 GB 1600 RAM
AMD Radeon HD5870
WD 3TB HD 7200 RPM NTSC file system
Pioneer BD-RW BDR-206 ATA burnerncore
Adobe Encore CS6

I do not see another example of this error with the "97060" in it.
I never trust my recollection of this, but note that the 24.37 GB may actually be 24.37 GiB, which may be too big to fit on a single layer Bluray. You should get a different error, but who knows.
I would try building to a folder to see if that succeeds. Then you can return to the issue of burning. Many of us prefer ImgBurn for burning rather than Encore.

Blue-ray Error: "device error", Code: "3"?

Does anyone know how to resolve a Blue-ray Error: "device error", Code: "3"?

I don't think we know a single solution.
See this thread:
http://forums.adobe.com/message/4328748#4328748
The link I refer to in post 1 (that refers to removing previous authorscriptsessions) is not relevant to CS6 - where they appear to automatically remove the old sessions.

Blu-ray Object: "Sept-Nov_2008", Error: "invalid format", Code: "14", Note: "ERROR: This stream does

I am trying to transcode a self contained FCP quicktime movie file and I get the message - Blu-ray Object: "Sept-Nov_2008", Error: "invalid format", Code: "14",
Note: "ERROR: This stream doesn't include Picture timing SEI, Unit Offset = 785835706". I am going to use quicktime pro 7 to import a quicktime movie instead of FCP self contained file into encore. But if anybody has any suggestions, please let me know. I have read about wrong field orders but I am using a custom preset with the field order set to upper (odd) - since I am using a Apple ProRes 422 (proxy) for the FCP sequence.

This thread might be helpful:
http://adobe.hosted.jivesoftware.com/message/3460426
-Ramesh

Blu-ray Error: "invalid operation", Code: "19", Note: "primary video stream attributes must be consi

When i try make a blu Ray (folder or image) i receive this error "
Blu-ray Object: "<Timeline>Untitled Timeline", Error: "invalid operation", Code: "19", Note: "primary video stream attributes must be consistent with playList"
is a specific error for blu ray?
Whats happen?.
Thanks a lot
If I create a dvd, all is right, no error are showed a dvd folder is created

Hello:
Finally I could make the Blu Ray disc.
The problem was in put in the same timeline two files in mpg format and psd file with 6 seconds of duration.
(no compatible timeline, causes error code 19)
For a right process a put each file in sperate timeline and end action link to the next file, Then, all go right an BR plays fine.
Maybe there was somthing diferent inside each mpg file , incompatble for a same timeline.
The mpg files were extratecd from dvd (vob files)
I hope that my exprerince help in the future to others persons with the same problems
Thanks all for support
Regards

Can anyone advise on this error: "Timeline", Error: "invalid format", Code: "14", Note: "Unknown

Hello,
Attempting to author a basic Blu-ray disc. Everything appears to be ok when I run the build check to make sure that the disc will write out correctly. When I start to build and burn the disc, Encore begins to import the video asset, and then quits with the following error message:
Blu-ray Object: "<Timeline> Untitled Timeline", Error: "invalid format", Code: "14", Note: "Unknown exception"
Does anyone have any thoughts regarding this error? In the project timeline, everything plays ok - picture and sound. I am importing a MPEG-2 file that came out of Compressor as an .m2v file. Not sure if this could be the cause of the invalid format. If so, odd that it imports into the project and simulates ok.
Thanks,
Mtbakerstu

Thanks Stan.
The project originates in Final Cut Pro, so it is easier for me to export out directly from FCP than to make an intermediate file to go into Premiere Pro. Also, going directly makes it more fool proof in terms of potential downstream issues with the MPEG encode.
That said, do you have a file format recommendation if I were to export a master file out of FCP, and then import into PP ?
Regarding if I want the M2V to work, do you know what setting might be causing the error... presuming that's the issue. Does it make sense that I would be able to see the video file workin in Encore, but when I try to then "build" it fails?
Thanks again, feedback most appreciated!
Mtbakerstu

Error FF753 Tax code 01 not appear in any G/L account item with FM Active

Hi
We have fund management configured for one of the company code, while creating billing document through VF01/VF02 we are getting the Error FF753 Tax code 01 not appear in any G/L account item.
This error however does not appear when posting directly from FI with the same tax code.
I have tried to change the message control in which case i am getting a dump pointing to PSM-FM.
Please advise.
Regards
Sandeep

Hi:
          If you could please refer to the contents of OSS Note 112609 - How are tax codes transferred to conditions ?
"Symptom
If a billing document is transferred to accounting the system displays error messages. Transferring tax codes from tax conditions into the pricing conditions and discounts does not function as expected.
Other terms
FF805, FF747, FF753, MWSKZ, MWSK1, tax code
Reason and Prerequisites
The tax condition in the SD pricing procedure contains incorrect reference steps, there are several tax conditions in the pricing procedure of which the tax codes overwrite each other or a program error exists.
Solution
In the accounting document for a billing document, the different G/L account line items are provided with a tax code. The tax code of the G/L accounts is transferred from the tax condition(s) of the billing document. How are the tax codes of the tax conditions transferred into the other conditions of a billing document ?
Basically:
The conditions of a billing document are read from top to bottom. As soon as an active tax (inactive = ' ') is read, the system transfers the tax code of this tax into the non-tax conditions as follows:
    1. The reference steps (From-step, To-step) are read (the reference steps are defined in the pricing procedure).
    2. The tax code is transferred into all conditions, for which
    the step number of the condition lies in the pricing procedure between "From-step" and "To-step",
    the condition is not inactive (exactly: the inactive flag is not equal to A (Condition exclusion), M (Inactive due to manual entry), or X (Incorrect)),
    the condition is not statistical (if it is no invoice list condition),
    the condition is no tax condition.
After the transfer of the tax code the system searches for the next active tax. If further taxes are found, their tax code is again transferred according to the above procedure. If the reference steps of different taxes overlap, tax codes that have already been transferred are overwritten. To all non-tax conditions which in the pricing procedure stand after the last tax condition the tax code of the last active tax condition is transferred if they are not statistical.
Special features:
    1. If the "From-step" of a tax condition refers to a subtotal of the pricing procedure, the tax code of the tax is not only transferred into the conditions with step number between From-step and To-step but into all non-tax conditions for which
    the step number of the condition in the pricing procedure is lower than the "To-step" of the tax condition.
    the condition is not statistical (if it is no invoice list condition).
    the condition is not a tax condition.
    2. If the "To-step" of the tax condition is smaller than the "From-step", then the system sets "To-step = From-step".
Notes:
    1. As of Release 4.0 the tax code is no longer transferred in pricing but only when the billing document is released to accounting.
    2. If you use several taxes and tax codes and Customizing is incorrect for the release of billing documents to accounting, among others the system may display error message FF747.
    3. If there are several taxes in the pricing procedure refer to Notes 72173 and 82091 for Releases 3.0D - 3.1G. For Release 3.1H, only note 82091 is relevant.
    4. For conditions which are transferred into accounting (thus not statistical, not inactive conditions) and do not contain a tax code, the system searches for a default tax code which in Accounting Customizing can be set depending on the company code (tax code for non-taxable transactions). This applies to releases up to and including Release 4.5B. For Release 4.6, refer to Note 385127."
Regards

Error: Device 768 (vbd) could not be connected. /etc/xen/scripts/block fail

Hello OTN,
After converting/exporting machines from VMware and importing them into OVM i am receiving errors on some of the machines when powering on.
Here is the complete error message:
Start - /OVS/running_pool/dirkwin
PowerOn Failed : Result - failed:<Exception: return=>failed:<Exception: ['xm', 'create', '/var/ovs/mount/483E943AE684484EAD7255356E8F24CC/running_pool/machinename/vm.cfg'] => Error: Device 768 (vbd) could not be connected. /etc/xen/scripts/block failed; error detected.
>
StackTrace:
File "/opt/ovs-agent-2.3/OVSXXenVM.py", line 57, in xen_start_vm
run_cmd(args=cmd)
File "/opt/ovs-agent-2.3/OVSCommons.py", line 85, in run_cmd
raise Exception('%s => %s' % (cmdlist, p.childerr.read()))
>
StackTrace:
File "/opt/ovs-agent-2.3/OVSSiteVM.py", line 131, in start_vm
raise e
Searching for this error turned up different solutions but none of them worked.
One mentioned OVM not being able to handle spaces in vm names but this is not a working solution as most of the machines are just regular names without spaces or special characters.
Also interesting, sometimes this error does not turn up when powering on BUT the machine just powers off again and returns to its turned off state. Next power on the error returns.
OS types vary from S10, Win XP and RedHat so a possible connection to the error being the host OS is not there.
Harddrive types are set to auto. The vm.cfg's of functioning machines do not differ from non functioning machines besides the actual vm name in the vm.cfg
Any idea to this error or how to solve it ?
Thanks
-Stephan

Hello Sebastian,
This is one of the vm.cfg which will abort due to the above mentioned error:
acpi = 1
apic = 1
builder = 'hvm'
device_model = '/usr/lib/xen/bin/qemu-dm'
disk = ['file:/var/ovs/mount/483E943AE684484EAD7255356E8F24CC/running_pool/vmname/vmname.img,hda,w',
',hdc:cdrom,r',
kernel = '/usr/lib/xen/boot/hvmloader'
memory = '2048'
name = 'vmname'
on_crash = 'restart'
on_reboot = 'restart'
pae = 1
serial = 'pty'
timer_mode = '0'
usbdevice = 'tablet'
uuid = 'a2a62bcb-f9ab-4ec3-8574-7415985cdf0a'
vcpus = 1
vif = ['bridge=xenbr0,mac=xx:xx:xx:xx:xx:xx,type=ioemu']
vif_other_config = []
vnc = 1
vncconsole = 1
vnclisten = '0.0.0.0'
vncpasswd = 'xx'
vncunused = 1
The xend.log also turned up nothing concerning this error. no messages were written into it. No other log has been created by xen in the /var/log/xen directory concerning an issue with the current machine.
Thanks for your help !
-Stephan
ps:mac address + pw is commented out
Edited by: Stephan Becker on Aug 5, 2010 7:11 AM

Error: Device type SWIN does not support page..

Hi All,
I'm working on smartforms which print sticker of size 5 cm width and 2.5 cm hight. I made page of same above mention size. but when i'm trying print this, it will show following error:
Device type SWIN does not support page for ZSTICKER(my page name).
Please do needful help ASAP.
-Dharmesh

Hi,
You need to link your new page to a device type. Use transaction SPAD. Go into the device type and click on the 'Format' button, this will list the supported formats, switch to change mode and add your new page format (ZSTICKER).
Regards,
Nick

Blu-Ray Error: "device error" code:"3" Note: CreateStcSequence:Fail to write M2Sfile.

I've seen this in other posts, but still not sure what to do. Pretty simple menu set up, 16 min. movie encoded first (in Premiere) then imported asset, but Blu-Ray gets almost done and I get the error message.
I'm working in Encore CS6. Have burned Blu-Rays directly from Premiere without issues. Have burned DVD from Encore without issues. Saw where Stan said something about burning with Toast? I have Toast, but how do I burn an Encore project in Toast?

I don't know toast, but V8 did not burn images; and in newer versions you may need to tell it to burn it as an image.
http://forums.support.roxio.com/topic/84731-how-to-get-toast-11-to-burn-blu-ray-disc-from- an-iso-file/
Burning the BDMV is not the same as burning the image. You could try burning the BDMV and the CERTIFICATE folders. But Toast should be able to burn the image.

HT1539 Just bought a Blu-Ray disc, entered the code to transfer movie to iTunes (online, not from the disc), but get an error that iTunes timed out? What is causing this?

If anyone can assist, I would love to know. Thanks folks.

Have you seen this thread about Disk Utility's space message and different Blu Ray media?
As to your other questions, I have very limited BluRay experience; the few times when I made a disk image it was for someone else's use or for testing workflows, but I know I didn't get into any weird encoding loops. As you know,the progress bar is pretty obscure by nature; alternatively, open up Batch Monitor and click on the info button do see what percentage has been complete.
Assuming by now that you've canceled the job, I would download Digital Rebellion's Compressor Repair tool (free) and run that – including the trash preferences option. Also, I've had occasions when job actions started to act up and were cured by running repair permissions in Dick Utility.
My impression is that the people who use disk images with Toast are happy with the results. So even if it's not something you get now, perhaps it's the long term solution.
Good luck.
Russ

Premiere Elements Blu-Ray Burn Fatal Error

How can I make my Premiere Elements 8 burn a Blu-Ray H.264 1920x1080 project without stopping (not crashing) with a “fatal error”(encoding media ~97% > burning disc 0% > fatal error; Adobe Media Encoder – Property Data Invalid”) after 13 hours?
I am trying to burn 629 stills (up to: 1671x1080, TIFF; PSD does not help) in 6 clips. The stills and clips are ok since I can render them and also burn any 3-5 clips (up to at least 7.47 GB) but not all 6 (7.75 GB, 52:23). The full project at 7.75 GB does not exceed BD-RE disc capacity (25 GB, full erase). I can burn the full 7.75 GB, 52:23 project in H.264 1440x1080, just not 1920x1080.
I have followed http://kb2.adobe.com/cps/515/cpsid_51553.html = “Troubleshoot system errors and freezes when burning DVDs or blu-ray discs (Adobe Premiere Elements 8)”.
My Gateway LX6200-01 seems adequate: 2.20 GHz processor = AMD Phenom 9500 Quad core 64-bit; Windows 7 64-bit, Home Premium, latest update; Color Monitor 1280x1024, 32 bit color; 8 GB RAM; C:\(program disc) = 478 GB free; D:\(photo disc) = 463 GB free; E:\(media cache) = 92 GB free; F:\(disc encoding cache) = 258 GB free; ATI Radeon HD 3200 graphics adapter (latest driver update); BD-RE = LGE BH08LS20, firmware 2.0 (latest update), set to DMA mode; PRE8 & PSE8: 64-bit, latest update.
All startup items and services disabled with msconfig.

Steve: Thanks for your good guidance.
Yes, I can output to an MPEG .m2t file, either H.264 1440x1080i 30 or H.264 1920x1080i 30. I can also burn H.264 1920x1080 either directly or with the .m2t file to BD-RE discs (as long as I shorten the disc name to less than 12 characters). But I can not burn either 1440x1080 or 1920x1080 to BD-R, either directly or with .m2t files. When I try, the BD-burner "thrashes" for ~5 minutes before PRE8 quits with "disc error" (but PSE8 will "burn data" to a BD-R disc).
The MS website says that my LGE BH08LS20 is compatible with Windows 7 64-bit and I have updated its firmware to 2.00 which LGE says is Windows 7 compatible.
Any ideas?
Tony

Blu-ray error: "device error", Code "3", Note: "AS_StorageError = -97064

Similar Messages

Maybe you are looking for