Blu-ray Fatal Error Code 6: Video Bitrate too High?

So I get this error every time I try to encode my Blu-ray disc. I am assuming that the bit rate I used to encode from Premiere was too high. Am I correct? If so, does this mean that I need to re-encode all of my assets at a lower bit rate before bringing them into Encore? Or is it some other issue? I did read all previous posts on this topic and couldn't really find an answer.
Thanks for any help.

Stan,
I don't fully understand either of your questions, but I am sure I can provide an answer that you will understand so here goes.
My audio files in Encore are actually wav files, but in my the root project folder they are ac3. Is ac3 an audio codec or something? I don't understand this. I guess they are session files, whatever that is... And why does this matter?
And what do you mean that Premiere and Adobe Media Encoder should not allow any peaks. Do you mean bit rate peaks?
And my only worry with making a modest drop in the bit rate is the fact that I have to render out almost 20 files before I can test out my Bluray burn again. This obviously takes some time to do and if it ends up not working it can be quite frustrating.
Thanks again for all of the help Stan. Hopefully I can fix it by just adjusting the bit rate.
- Jason

Similar Messages

  • Blu-ray: "fatal error", Code: "6"; "Note:"

    Blu-ray: "fatal error", Code: "6"; "Note:"
    That's the error I got when Encore CS3 started to actually write to the bluray burner.
    It's worked many other times but this time it did everything except the burn.
    If I reboot or change blanks it doesn't seem to matter. When it gets to the stage of starting to write to the disc, I get the message above.
    Real helpful, right?
    Hope there some "real" help here.
    Thanks,
    Steve Garman
    HP XW8200 3.4 gig Xeon Dual and 4 gigs ram. XP Pro with SP2.

    I can't seem to get any response here so I'm wondering if there is any list of Encore errors on the Adobe site? Errors like this are pretty meaningless unless you have a list of explanations. Any cluses who might have one?
    Thanks,
    [email protected]

  • Urgent help! VIDEO BITRATE TOO HIGH

    i have prepared a very simple project - 1 menu and 1 track - and when i try to burn or build and format the build is cancelled and the error message reads VIDEO BITRATE TOO HIGH. What am I doing wrong? Last week I successfully made a much more complicated DVD and havent changed any of the settings...

    Figure out the rates for your video and audio here
    http://dvd-hq.info/Calculator.html & http://www.videohelp.com/calc.htm
    to try to find what bitrate works for encoding, then encode outside DVD SP. (Make new ones with files with distinct new names. Merely changing the settings insdie of DVD SP will not work except for new projects, this way is quicker.)
    Remember to A.Pack your audio also.
    Even if the settings worked last time, if you exceeded the rate for DVDs (and encoding can have spikes in it) this problem can still occur. If you were importing movies straight into DVD SP without A.Pack/Dolby, ths increases the chance of problems.
    Usually A.Pack/Dolby of the audio will cure many issues assuming the settings for the video are not excessive.

  • Stereo audio causes "Video Bitrate too High" error

    SOS, Whizzkids.
    I try to make a build of a DVD with 1 menu and 3 tracks. , and I get an error message "Video Bitrate Too High." I check the compression setting and they're set to factory default for SD 4by3. (4 and 7 MB).
    Get this: I delete one channel of audio from each of the 3 tracks and it compiles perfectly.
    I duplicate audio channel 1 by option-dragging to channel 2 for one track, recompile and get the same error.
    I give in. Wassup?
    Any help gratefully received.

    Did you convert your audio to AC-3 (Dolby Digital)?
    If not, this is the likely cause of your problem. Run your audio through A.Pack (if using DVDSP 3 or earlier) or Compressor 2 (if using DVDSP 4). The "Dolby 2.0" presets in Compressor 2 are the Dolby Digital, but it's recommended to change the following settings and make a new preset.
    Set dialog normalization to -31 and the Compression Preset to "None". They default to -27 and "Film Standard", respectively.

  • "Video Bitrate Too High" error on build, but i KNOW it's not too high.

    i keep getting the error "Video Bitrate Too High" when i try to build a DVD. i think its a bogus error, because A) i've successfully built a DVD with the media that it claims is too high a bitrate, and B) the media was ripped from an existing DVD and is already in .m2v and .ac3 format (with some titlecards that i added in DVD studio pro to the timeline). it shouldn't be recompressing it at all.
    any thoughts? when i took out the offending track, it just gave me the same error on another track.
    thanks much for any help!
    dav.

    thanks for the tips! can you provide me with some more info?
    1) how do i demux with another program? which program?
    2) how can i cut the last ibbp frame-group?
    its very strange. if i create a new project and try to build it from there, it works. but if i import it into my main project, it gives me the error. any thoughts? is there a setting that i can change that controls the allowable bitrate?
    thanks again.
    dav.

  • Video bitrate too high... Okay now what?

    Hello,
    As usual, when I try to build my DVD in DVD Studio Pro I get the error 'video bitrate too high'.
    I checked it out on the net, and I get what the error message means. I wanna ask you guys what I should do next. Apparently I should reduce the bitrate, by how much? Should I recompress the m2vs I have in Compressor then put them back in Studio Pro, or can Studio Pro reduce the bitrate internally?
    Thanks a lot a lot!! Please help!
    Kenji

    One of the least understood issues, bitrates. Among the more common misunderstood causes is the total bitrate includes audio processing and, because the DVD spec is so old and primitive, your total bitrate must never exceed the top end; there is no headroom for transient peaks so you could have a single frame that spikes and this can terminate the encode.
    You must use a less intensive audio file structure, that's AC3, I think.
    bogiesan

  • Burn failure because "Video Bitrate Too High"

    Hi all, I'm trying to burn a dvd with 10 short films on it and just got this error:
    Starting DVD Build TESTING_DVD...
    Compiler Initializing...
    Precompiling Project TESTING_DVD
    Compiling VMG Information...
    Created 25 PGCs in VTSM1
    Created 5 PGCs in VTSM2
    Created 13 PGCs in VMG.
    19 Menu(s) will be created...
    Compiling Menu PGCs...
    Compiling Menu#1 (Ravens)...
    Rendering Menu:Ravens,Language:1...
    Compiling Menu#2 (Cowboys in Kosovo)...
    Rendering Menu:Cowboys in Kosovo,Language:1...
    Compiling Menu#3 (Red Rubber Boots)...
    Rendering Menu:Red Rubber Boots,Language:1...
    Compiling Menu#4 (Images From the Corner)...
    Rendering Menu:Images From the Corner,Language:1...
    Compiling Menu#5 (House of Wisdom)...
    Rendering Menu:House of Wisdom,Language:1...
    Compiling Menu#6 (A Conversation with Haris)...
    Rendering Menu:A Conversation with Haris,Language:1...
    Compiling Menu#7 (Its Only Mine)...
    Rendering Menu:Its Only Mine,Language:1...
    Compiling Menu#8 (I Don't Know Where)...
    Rendering Menu:I Don't Know Where,Language:1...
    Compiling Menu#9 (Father, Son, Holy Ghost)...
    Rendering Menu:Father, Son, Holy Ghost,Language:1...
    Compiling Menu#10 (Menu 1)...
    Rendering Menu:Menu 1,Language:1...
    Compiling Menu#11 (Menu 3)...
    Rendering Menu:Menu 3,Language:1...
    Compiling Menu#12 (About AMMAM)...
    Rendering Menu:About AMMAM,Language:1...
    Compiling Menu#13 (Zel bio)...
    Rendering Menu:Zel bio,Language:1...
    Compiling Menu#14 (Roberto bio)...
    Rendering Menu:Roberto bio,Language:1...
    Compiling Menu#15 (Corrine bio)...
    Rendering Menu:Corrine bio,Language:1...
    Compiling Menu#16 (Jasmila bio)...
    Rendering Menu:Jasmila bio,Language:1...
    Compiling Menu#17 (Sheila bio)...
    Rendering Menu:Sheila bio,Language:1...
    Compiling Menu#18 (HoW statement)...
    Rendering Menu:HoW statement,Language:1...
    Compiling Menu#19 (CiK statement)...
    Rendering Menu:CiK statement,Language:1...
    Writing VIDEO_TS.VOB
    Compiling Menu PGCs...
    Writing VTS020.VOB
    2 VTSs and 12 Titles will be created...
    Compiling VTS#1 (Animation demo)...
    Muxing VTS011.VOB
    Done.
    Compiling VTS#2 (Play All)...
    Writing VTS020.VOB
    Muxing VTS021.VOB
    Video Bitrate Too High
    Build cancelled
    Formatting finished.
    Building was not successful. See log.
    Does this mean the first film in the Play All track needs to be adjusted? Or that they all need to be adjusted? And adjusted to what? They fit on the disc in terms of space. Please help!
    Message was edited by: ErinSayHi

    Hi.
    I'm having a similar problem here.
    This is the log I get:
    Starting DVD Build DEMOREELOMARVELAZQUEZ...
    Compiler Initializing...
    Precompiling Project DEMOREELOMARVELAZQUEZ
    Parsing Assets...
    Encoding Assets...
    Compiling VMG Information...
    Created 7 PGCs in VTSM1
    Created 5 PGCs in VTSM2
    Created 14 PGCs in VMG.
    1 Menu(s) will be created...
    Compiling Menu PGCs...
    Compiling Menu#1 (Menu Principal)...
    Writing VIDEO_TS.VOB
    Compiling Menu PGCs...
    Writing VTS020.VOB
    2 VTSs and 4 Titles will be created...
    Compiling VTS#1 (Pizarra Lúdica Omar)...
    Muxing VTS011.VOB
    Done.
    Compiling VTS#2 (Track Spots)...
    Writing VTS020.VOB
    Muxing VTS021.VOB
    Video Bitrate Too High
    Build cancelled
    Formatting finished.
    Building was not successful. See log.
    This is a project that I already had burned to DVD with no problems whatsoever, but I recently moved from OSX 10.4 to OSX 10.5 and also moved from DVDSP 3 to DVDSP 4 and there my problem began. At the moment I have 768mb of RAM and I'm aware that DVDSP 4 is asking me for at least 1gb to work properly. Would the RAM be the problem?.
    I hope you can help me out.
    Thanx.
    Omar

  • "Video bitrate too high", but DVDSP burned the same project before

    I go the "Video Bitrate Too High" error. Normally I'd go back and "fix" it, but I just re-opened an old project. Same assets, same everything. Last time DVDSP burned it, this time it won't.
    DVDSP 4.2.1

    not sure if you're saying they were pre-encoded or not, If a previous project is coming up with warnings it did not have before and refuses to burn, you might try throwing away the PAR files associated with the assets - these may be giving DVDSP inaccurate info about the bitrate and GOP structure.

  • Video Bitrate Too High

    Building Project Portfolio
    05/10/29 11:14:33 AM
    Build Folder /Volumes/Scratch Disc/FortNite DVD
    Starting DVD Build PORTFOLIO...
    Compiler Initializing...
    Precompiling Project PORTFOLIO
    Compiling VMG Information...
    Created 29 PGCs in VTSM1
    Created 5 PGCs in VTSM2
    Created 5 PGCs in VTSM3
    Created 5 PGCs in VTSM4
    Created 8 PGCs in VMG.
    5 Menu(s) will be created...
    Compiling Menu PGCs...
    Compiling Menu#1 (Menu 1)...
    Rendering Menu:Menu 1,Language:1...
    Compiling Menu#2 (Menu 2)...
    Rendering Menu:Menu 2,Language:1...
    Compiling Menu#3 (Menu 3)...
    Rendering Menu:Menu 3,Language:1...
    Compiling Menu#4 (Menu 4)...
    Rendering Menu:Menu 4,Language:1...
    Compiling Menu#5 (Menu 5)...
    Rendering Menu:Menu 5,Language:1...
    Generating Transition: VTSM #01, VOB #1...
    Generating Transition: VTSM #01, VOB #2...
    Generating Transition: VTSM #01, VOB #3...
    Generating Transition: VTSM #01, VOB #4...
    Generating Transition: VTSM #01, VOB #5...
    Generating Transition: VTSM #01, VOB #6...
    Generating Transition: VTSM #01, VOB #7...
    Generating Transition: VTSM #01, VOB #8...
    Generating Transition: VTSM #01, VOB #9...
    Generating Transition: VTSM #01, VOB #10...
    Generating Transition: VTSM #01, VOB #11...
    Generating Transition: VTSM #01, VOB #12...
    Generating Transition: VTSM #01, VOB #13...
    Generating Transition: VTSM #01, VOB #14...
    Generating Transition: VTSM #01, VOB #15...
    Generating Transition: VTSM #01, VOB #16...
    Generating Transition: VTSM #01, VOB #17...
    Generating Transition: VTSM #01, VOB #18...
    Writing VIDEO_TS.VOB
    Compiling Menu PGCs...
    Writing VTS020.VOB
    Compiling Menu PGCs...
    Writing VTS030.VOB
    Compiling Menu PGCs...
    Writing VTS040.VOB
    4 VTSs and 4 Titles will be created...
    Compiling VTS#1 (Track 1)...
    Muxing VTS011.VOB
    Video Bitrate Too High
    Build cancelled
    I've been having this problem for a couple days now. I'm not sure what to do. I have 4 videos and they seem to render well under 3 GB, but it's mainly the menu that doesn't work. Can anyone suggest anything? If you have any more questions, just ask.

    Well if you're using PCM audio (.aif) you've got no chance with a bitrate that high. PCM audio takes up 1.536Mbps of your total bandwidth. So at 9 you are way over already!
    Even if you use DD AC-3 you pretty much have no chance too cause many encoders will spike over the max for VBR or target with CBR and at the bitrate you are leaving no headroom,
    Reduce your bitrate, cause as the message says, it's too high,
    -jake

  • Video Bitrate Too High...Wha?!?! NO!!

    hello. i just spent 24 hours compressing (with compressor, from fcp) a bunch of projects of various length with various bitrates. when i tried to burn them with dvd studio pro, they all said "video bitrate too high." now, some of the projects had a video bitrate of 7.2, while others were 3.5...and they all said "video bitrate too high." what's up with that! i was using aiff audio...is there a chance that the problem was caused by that? right now, i'm re-compressing everything with ac3 as the audio format. in another 24 hours, i'll know if it worked.
    can someone help me?!?!?!

    well a maximum bit rate of 8.8 with 1.5 of AIFF file, gives us a 10.3 bitrate, unfortunetly DVD maximum bit rate is 9.8, so here you go, you are well out of spec, use a 224kbs on the AC-3 encode for the audio with a dialogue normalization of -31, and a maximum of 8.5 bitrate on your video compression and you should be a happy man next time!!!!!
    good luck,
    PJ

  • "Video Bitrate too high" message - DVD Studio Pro

    I have been using the workflow of; video from FCP, through Compressor (best 60 minutes & Dolby Audio) and then on to the build & burn format in DVD Studio Pro and a final burn through Disk Utility for about two years with flawless success.
    4 days ago I got the following "failed" message in the build & burn process in DVD SP: "Video Bitrate too high."
    I have been trying to solve this problem with these solutions:
    I threw away my DVD SP .plist file(s), exported new video from Compressor at a lower bit rate, Followed all the suggestions on the DVD SP troubleshooting basics web page, checked the discussions on this topic and followed some suggestions, uninstalled and reinstalled the whole FCP Studio, deleted files so my hard drive has more space, to no avail... I still get the message.
    I have tried everything and can't imagine what else I can do. Would really appreciate if anyone has any suggestions.

    Welcome to the boards
    Take a look at these couple of things
    http://dvdstepbystep.com/faqs_3.php
    http://dvdstepbystep.com/faqs_7.php
    Try deleting the MPEG and PAR files that were made and/or create a newly named M2v after re-encoding, could be something in those were corrupted. If you dropped in Dolby audio and using the preset without having changed it, it should work, but something can be glitchy. Also a chance there is a spike somewhere in the encoding...

  • Video Bitrate Too High-DVD

    I have edited many videos and burned the DVDs in FCX 10.1.3 without any problem until now with the dreaded warning message: "Video bitrate too high." The video is around 1 hour and 8 min. I had no problem with other videos as long as this one for sharing with the DVD. I have looked for help in Google by using this warning message. Most of the messages are related to older version of FCX. I have tried to use Compressor 4 without success. Now, I can't find any solutions from them due to the different features in the current FCX. How do I fix it? Is there anyway I can reduce the video bitrate by tweaking the software? Any suggestions? Your help will be much appreciated.

    C4 is Compressor? Do you have 4.1 or later or still in version 4.
    Duplicate the MPEG-2 preset and in the video tab adjust the maximum and average bit rate. See if this helps you get started working with the application
    http://www.fcpxbook.com/articles/compressor41/

  • Encore CS6 Blu-Ray "fatal error" during build

    I have an external ble-ray drive that I just bought from OWC for my MacBook Pro. I have created a project for a wedding that has 3 sequences. Everything looks good, and the building/burning process gets about 90% done and I get this:
    Blu-ray Error: "fatal error", Code: "6", Note: "Video buffer underflows. Total bitrate is too high near time = 0.0000000 seconds - Failed to multiplex with maximum IG PTS: 54900000 (in 90kHz).
    I am new with Adobe, especially Encore. This is my third try with the same message. I tried building to Blu-Ray disc as well as Blu-Ray image. I have several couples waiting on a Blu-Ray disc for their wedding video, and I can't produce one! So frustrated!
    Any help is MUCH appreciated!
    Josh

    ElCuso12 wrote:
    Blu-ray Error: "fatal error", Code: "6", Note: "Video buffer underflows. Total bitrate is too high near time = 0.0000000 seconds - Failed to multiplex with maximum IG PTS: 54900000 (in 90kHz).
    This is actually a very interesting error message. There are 4 blu-ray authoring programs that can display a error message that contains "video buffer underflows" when authoring a Blu-Ray with H.264.
    These 4 blu-ray authoring programs are: Sony DVD Architect Studio, Sony DVD Architect Pro, Adobe Encore and Sonic Senarist BD.
    Another interesting thing is also that the complete error message that is displayed by both Sony DVD Architect Studio and Sony DVD Architect Pro is exactly identical, word for word, with the error message that is displayed by Sonic Senarist BD.

  • Blu-Ray: fatal error

    I'm getting an error when trying burning a Blu-Ray Disc.
    Error:
    Blu-ray Error: "Fatal Error", Code: "6", Note:"
    using Tyan S2696A2NRF with LG GBW-H10N and Pioneer BDR-202
    Any idea?

    I'm having the problem again, and I even repair installed msxml 6.0. I think the problem may be related to the use of 29.97i format this time. My successful build last month was a 24p video.
    I am taking 30p video and rendering it as 29.97i for Blu-print. I also am using one simple menu. Maybe I'll drop the menu and see if the build will complete. Could be a problem with the menu or the video being interlaced.

  • "Video Bitrate too High" error when i build/format

    Help! Ive reduced my bitrate to 2mbps for a 2 hour dvd project, and I still get a "bitrate too high error" when I try to burn. Even if i try to create an image and burn with toast, I still get the same error. I've also tried burning with a dual layer dvd and still no luck. Any help would be much appreciated.

    iami
    Are you encoding inside DVDSP? Then the cause of the error most probably is related with your audio. DVDSP use uncompressed audio (AIFF) what takes a lot of the available total bitrate. Use Compressor to encode your video & audio as follow:
    For 2hs of video you must be fine using the standard *120 min* MPEG2 preset AND the Dolby2 (AC3) audio preset. Ue those files in the DVDSP project and try to build again.
    Hope that helps !
      Alberto

Maybe you are looking for