Blu-ray Mac can not open

Hi
after burning a Blu-ray the Mac says it can not open but there is a quickTime folder on it saying "BDMV" any ideas?
Ta

hi
Do I need a differant setting for quickTime. When The video was made I made two copys one for iTunes and one for Compressor, the one for iTunes works OK no problems but the one afterr burning to Blu-ray will not open?

Similar Messages

  • CD/ Blu-ray Drive Will Not Open/ Function Correctly

    My CD/ Blu-ray drive will not open. I can force it open with a paper clip and put in a disk that way but it does not activate and read the disk. The drive also does not appear as a file selection under my hard disk drives section of my computer.
    With this I am assuming my optical drive is broken so I tried looking for a replacement. I searched for the name of the optical drive in the HP PartSurfer and it says it is called SPS-DRV DVD SATA BD Combo 12.7. Just to be sure, is that the correct part I am looking for? If so, and say I were to go ahead and order this part, how do I go about removing the optical drive in my labtop and replacing it with the new drive?
    This question was solved.
    View Solution.

    Hi,
    Yes..that is the right part for your notebook.
    HP Pavilion dv6-3259wm Entertainment Notebook PC - (XZ087UA): 603678-001
    You can follow the instructions from the links below:
    Removing and Replacing the CD/DVD Drive
    Or, 
    HP Pavilion dv6 Entertainment PC - Maintenance and Service Guide
    Note:
    If you have HP Support Assistant installed on the computer(The Blue Question Mark) then open it ==> Complete all pending Updates & Tuneups==> Restart and Check. It may solve your problem
    Although I am an HP employee, I am speaking for myself and not for HP.
    **Click on “Kudos” Star if you think this reply helped** Or Mark it as "Solved" if issue got fixed.

  • I have a G5 mac using ver 10.4.11 and a newer mac using ver 10.8.4 these are networked. using the new mac i looked up my my photo on the old mac. It then said you need to upgrade your library which it did. Now the old mac can not open the photos

    I have a G5 mac using ver 10.4.11 and a newer mac using ver 10.8.4 these are networked. using the new mac i looked up my my photo on the old mac. It then said you need to upgrade your library which it did. Now the old mac can not open the photos and say that I need to upgrade my I photo to a newer version. The old mac has no more support from apple in software update so I am not sure where I should go from here. can I use new soft ware with the old mac

    The other part of the upgrade message was a warning that once you upgraded you would no longer be able to open the library with the old version which is exaclty what you did and what happened when you choose to continue
    The iphoto library needs to be upgraded to work with this version of iPhoto. Your photo library will not be readable by previous versions of iphoto after the upgrade. The upgrade process may take several minutes depending on the number of photos in the library. Cancel or upgrade.
    So now your choices are to not use iPhoto with the previous version using it onky with the newer version, restore your backup from before you did this upgrade or purchase iPhoto Library Manager and use it to rebuild the library using the older version of iPhoto (instructions are on their web site) thereby downgrading it (without projects)
    LN

  • How can i open iphoto after the new update OS X 10.9.2 (13C64) i keep getting this mac can not open this application.

    How can i open iphoto after the new update OS X 10.9.2 (13C64) i keep getting this mac can not open this application.

    This screenshow shows which previous versions of iPhoto are compatible with Mavericks.  It also indicates which versions qualify for a free upgrade to iPhoto 9.5.1 and which require a purchase:
    OT

  • My mac can not open any dmg file, what  can I do?

    My computer can not open any dmg

    Which os do you have?
    Please describe in detail all you have attempted to do in order to resolve the issue.  If you received any errors, what did they say?

  • Can not open After effects by System 10.9

    Kann After Effect nicht starten. Habe die aktuelle Version auf dem Mac
    can not open After Effect. But i have the right Version on Mac

    12.0 ist nicht aktuell. 12.1 oder 12.2 schon eher. Das sind die üblichen Probleme mit Mavericks und insbesondere 12.1 hat schon etliche davon beseitigt... Also einfach mal die Updates installieren.
    M ylenium

  • File sharing can not open files when transferred.

    File sharing. When files are sent over to folder on mac can not open message comes up " you do not have permission to open the document"
    Had no problem before loading 10.9.

    Files are coming from another computer on the network and they put the files into a folder on the deck top. When I try to open them I found that I had to select the folder and "get info" and go down to the gear and select "apply to enclosed items" It seems once I take the files out of the folder it reverts back to the default. Then I have to  reset it each time to open new files. In Sharing & permissions I have all the privileges set for read & write is there another way to set it as a default to be able to open the files with going to the gear each time?.

  • TS1702 Hello, we have a Mac and an ipad,the Mac is working and wifi is on and the Ipad's wifi is on too, but Ipad Safari can not open because it could not connect to the server, does any one know what have happened?

    Hello, we have a Mac and an ipad, the Mac is working and wifi is on and the ipad's wifi is on too, but Ipad Safari can not open the page because it could not connect to the server, does any one know that?

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are drooping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Fix WiFi Issue for iOS 7
    http://ipadnerds.com/fix-wifi-issue-ios-7/
    iOS 6 Wifi Problems/Fixes
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    iPad: Issues connecting to Wi-Fi networks
    http://support.apple.com/kb/ts3304
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    10 Ways to Boost Your Wireless Signal
    http://www.pcmag.com/article2/0,2817,2372811,00.asp
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
    You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
    Wi-Fi or Bluetooth settings grayed out or dim
    http://support.apple.com/kb/TS1559
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • I just updated my mac and when i went to open iphoto it says it "can not open because of a problem" how do i fix this?

    i just updated my mac and when i went to open iphoto it says it "can not open because of a problem" how do i fix this?

    To re-install iPhoto
    1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
    2a: On 10.5:  Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
    2b: On 10.6: Those receipts may be found as follows:  In the Finder use the Go menu and select Go To Folder. In the resulting window type
    /var/db/receipts/
    2c: on 10.7 they're at
    /private/var/db/receipts
    A Finder Window will open at that location and you can remove the iPhoto pkg files.
    3. Re-install.
    If you purchased an iLife Disk, then iPhoto is on it.
    If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
    If you purchased it on the App Store you can find it in your Purchases List.

  • I can not open the ipad manual on my mac os x 10.5.8 since i sync with itunes acct. Safari just crashes. Is there any thing I can do

    can not open the i pad manual on my lap top mac os x 10.5.8 since i sync with itunes acct. Safari just crashes. Is there any thing I can do Have the manual on IPAD2
    Do I need My i pad to be connected to my laptop?
    Howard

    Do I need My i pad to be connected to my laptop?
    Your iPad needs access to the internet via Wi Fi or 3G in order to access the App Store.
    Tap the App Store icon in your iPad.
    In the search field top right in the App Store window type in:
    ipad user guide for ios 4.3. Tap Free / Get Book
    As for Safari on your Mac crashing, you can start a new topic and post a crash report so we can try and help.
    Click here:  https://discussions.apple.com/index.jspa
    Click New / Discussion. Select Safari.
    Refine This LIst. Select Mac.
    If Safari has just crashed, press the Report button on the CrashReporter dialog box to view the crash  information.
    Now copy/paste the entire contents of the Crash Reporter window into your reply. 
    If the crash report dialog does not appear or the crash is hard to reproduce, crash logs can be retrieved from the ~/Library/Logs/CrashReporter> folder.
    Safari could be crashing due to third party unsupported  add ons. Follow the troubleshooting instructions here.
    http://support.apple.com/kb/TS3230?viewlocale=en_US

  • Adobe photoshop lightroom won't install on my Mac - error can not open file

    Adobe Photoshop Lightroom4 will not install on my Mac. "Error can not open file" when trying to open will installer. If I cannot get it to work I would like to return product.

    What version of Mac OS are you using?  What is the exact name of the file which you are double clicking on?  If you right click on the file and select Get Info what does it state under the Open With section?

  • I recently upgraded to a G5 and Logic Pro 8. My previous system was a Power Mac 7200 with Logic Platinum 3.5.3. I can not open the old song files unless they are first saved in Logic 6 or 7. Where do I get a dongle for Logic 7?

    I recently upgraded to a G5 and Logic Pro 8. My previous system was a Power Mac 7200 with Logic Platinum 3.5.3. I can not open the old song files unless they are first saved in Logic 6 or 7. Where do I get a dongle for Logic 7?

    eBay or Craigslist would be the only choice.

  • I can not open the mac app store from my macbook pro, I can not open the mac app store from my macbook pro, I can not open the mac app store from my macbook pro

    Help...
    I can not open the mac app store in any way from my mac book pro
    please help

    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Click the Clear Display icon in the toolbar. Then try the action that you're having trouble with again. Select any messages that appear in the Console window. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.

  • I am running Photoshop CS6 on a Mac OS X 10.9.3 and every time I save a large eps I can not open it again. I get this message when I try. "Could not complete your request because Photoshop was unable to parse the PostScript."

    I am running Photoshop CS6 on a Mac OS X 10.9.3 and every time I save a large eps I can not open it again. I get this message when I try. "Could not complete your request because Photoshop was unable to parse the PostScript."

    Oh, dear.
    If you use PSE as your external editor for iphoto, you need to save the images back to iphoto by using Save, not Save As and not changing anything like the name or format that would bring up the Save As window. (You may need to adjust the editor prefs>saving files>on first save to save over existing.)
    OR you can export the photos from iphoto to the desktop, use file>open in the editor and then change whatever you want and either import the saved image to the organizer or import it back to iphoto as a new file. What you are doing is extremely risky, particularly to the iphoto library which you may easily damage by your workflow.
    I would start the organizer holding down the shift key, then create a new catalog and switch to the new one. Then try opening the editor without opening an image and see if you get any farther.
    PSE and iphoto are not designed to be used as you've been doing. You are trying to write to the iphoto library from outside iphoto, which is the fastest known way to corrupt the library and lose all your photos.

  • Hello, I can see the Icon of my external hard on the mac os x 10.6.8 but I can not open it or view any file in the external hard

    hello, I can see the Icon of my external hard on the mac os x 10.6.8 but I can not open it or view any file in the external hard
    your prompt reply will be appreciated
    thanks

    Reinstall 10.6 again, but this time hold c boot off the 10.6 and erase the ENTIRE internal drive.
    You do this by selecting the drive makers name and size on the left hand side, not the slightly indented partition underneath it.
    If you erase and install 10.6 only into a parittion, say Macintosh HD, the you still have the hidden Lion Recovery Partition on the drive and it appears you already have 10.7
    In the MAS, hold option and click Purchases to redownload Lion
    FYI, you don't need to install 10.6 to reinstall 10.7, 10.7 can be reinstalled via the Lion Recovery, Command r boot.
    See this for more info
    https://discussions.apple.com/docs/DOC-3046

Maybe you are looking for

  • Setting up Open Directory and iCal server.

    Hello: I'm new to open directory - please help or point me in the right direction. I'm trying to set up a OSx server 10.5 running on a PowerMac G4. I need iCal/DNS/FS/VPN/WEB/Open Directory as services enabled. For testing purposes I've set up a smal

  • How could it happen that there was a wrong FIRMWARE on the HP side?

    Hey, I've bought a HP LaserJet Pro 200 color MFP M276nw. I checked for a new firmware 1. downloaded the latest one: M270_colorMFP_Series_FW_Update-20140718.exe 2. I started the exe file while working in a WiFi NETWORK    2.1 - chose the printer    2.

  • Error while Launch Setup of IDM(Identity Install Pack 2005Q3M1)

    Hi Everyone, I have installed IDM(Identity Install Pack 2005Q3M1),but when i launch setup and select repository type as Oracle and provide URL,JDBC Drvier,Connect User,Connect Password it gives error com.waveset.util.InternalError: ==> java.lang.Numb

  • Heirarchical menus click

    Hi all, I have an heirarchical menu, when i click on one it redirects to its page, but when i exit that page and comes back to my menu, that link to that specific closed form disables(means if i click on that specific page link that i just exited it

  • DDIC_ACTIVATION

    Dear All, i have checked in TRBAT and TRJOB no entries are there. when i am applying  Basis Patch SAPKB70008. Throwing the following Error: The import was stopped, since an error occurred during the phase DDIC_ACTIVATION, which the Support Package Ma