Blu Ray playback skipping even when not burned to disk (CS6)

I'm using encore to create a simple blu ray disc image from 5 separate video files each with 2 audio tracks (stereo and 5.1). all the encoding is being done via media encoder using the H.264-blu ray presets and compressor for the surround sound so encore is just assembling the iso. Once this is done it skips and hangs in every video even when played back through the computer without being burnt to disc (just mounted for testing). Watching the data rate it is jumping all over the place and when it hangs it often drops to 0 or less than 5Mbp/s
Am i missing a step or encoding it incorrectly or is this a common bug? I've been through a stack of discs working on this problem and any help would be appreciated as I need to deliver our films on DVD and Blu Ray imminently.
Cheers
Rich

ok about to do that now - just noticed that my timeline is displaying upside down and in greyscale in the monitor - now I'm really starting to think Encore is paying up!!

Similar Messages

Blu-ray: "fatal error", Code: "6"; "Note:"

Blu-ray: "fatal error", Code: "6"; "Note:"
That's the error I got when Encore CS3 started to actually write to the bluray burner.
It's worked many other times but this time it did everything except the burn.
If I reboot or change blanks it doesn't seem to matter. When it gets to the stage of starting to write to the disc, I get the message above.
Real helpful, right?
Hope there some "real" help here.
Thanks,
Steve Garman
HP XW8200 3.4 gig Xeon Dual and 4 gigs ram. XP Pro with SP2.

I can't seem to get any response here so I'm wondering if there is any list of Encore errors on the Adobe site? Errors like this are pretty meaningless unless you have a list of explanations. Any cluses who might have one?
Thanks,
[email protected]

Blue-Ray Object: "Menu"; Export File Not Found--Any Clues?

Trying to build a Blue-Ray DVD in CS3 (version 3.0.1.008). Project has motion menus and previews without errors. Upon trying to build either a disc or image I get the error
Blue-ray object: "Menu"; Export file not found.
Where "Menu" is the name of one of the sub menus in my project.
Has anyone seen this error? What is an Export file? When and how does it get created?
I have successfully burned this project to a standard DVD format.

I have the pleasure of closing out my own question. I found the following post that was the clue I needed.
http://forums.creativecow.net/readpost/145/857374
It would appear that the Blue Ray build process is a lot more sensitive to file naming. I brought into my project a menu that I used as a starting template, I edited it in Photoshop and then renamed it in Encore. During the Blue Ray build process Encore rendered the menus to the original template names, but when it needed them to build the DVD it looked for the files that had the new names I had given the menus in Encore.
Here is the fix. I exported the final menus using the Save as Template function in Encore. I then re-imported them as menus and relinked them to the DVD assets. Everything worked fine from that point on.
The interesting thing is this did not happen when building a standard DVD using the same menus.

When i burn a disk in Disk Utility, the burn completes but the verification process does not complete and my disk pops out. The error message i get is something like this "burn failed because disk cannot be verified," PLEASE HELP

when i burn a disk in Disk Utility, the burn completes but the verification process does not complete and my disk pops out. The error message i get is something like this "burn failed because disk cannot be verified," PLEASE HELP.
Also when i take the disk out it seems fine nd everything seems to be burned onto the disk. I am buring mac os x lion onto a disk.
The disk i am using is nextech and i am burning at the slowest speed (4x).
Also this is my 3rd time trying to do this and the verifying process keeps failing.... what do i do?

see there
http://www.techmixer.com/best-free-mac-burning-software-for-mac-osx/
what you like most
try different brand of CD/DVD

I downloaded the new 7 update and now my iPad won't charge to 100% and loses power even when not in use ?

i downloaded the new 7 update on my ipad. it now will not charge to 100% and loses power even when not in use. any solutions ??

Try a reset: Simultaneously hold down the Home and On buttons until the device shuts down. Ignore the off slider if it appears. Once shut down is complete, if it doesn't restart on it own, turn the device back on using the On button. In some cases it also helps to double click the Home button and close all apps BEFORE doing the reset.
Then plug it in and let it fully charge.

I just purchased the hunger games on blu-ray with digital copy. when I try to download the HD digital copy it gets to about 80% compete then stops with a download error (-50). What is that how do I fix?

I just purchased the hunger games on blu-ray with digital copy. when I try to download the HD digital copy it gets to about 80% compete then stops with a download error (-50). What is that how do I fix?

Perhaps try the "Error -50," "-5000," "8003," "8008," or "-42023" section in the Specific Conditions and Alert Messages: (Mac OS X / Windows) section of the following document:
iTunes: Advanced iTunes Store troubleshooting

The system is auto population partner profit center even when not provided

Hi experts,
While posting FB01,The system is auto population partner profit center even when not provided in the entry.Requested to you could you please assist us as soon as possbile.
Thanks & Best regards
Sreenivas

Will you please let me know where you get this field partner profit center. In my screen for FB01, I do not see any such field.
Sangram

Phone thinks the earbuds are in even when not

phone thinks the earbuds are in even when not. Does anyone know how to fix?

Hey tss808,
Try the tips in this article:
http://docs.info.apple.com/article.html?artnum=306910
Jason

I have a large number of PDFs documents stored on a windows pcthat I would like to access on my iPad mini even when not cBooking referenceonnected to a network.

i have a large number of PDFs documents stored on a windows pc that I would like to access on my iPad mini even when not connected to a network. Does anyone know a solution. Eg maybe card reader and a app.

Those devices have mixed results depending on the application. If the application does not support the device, then you are out of luck. There is no file manager in IOS to allow you to move files between folders because there are no folders that you can access. An app has to specifically support a storage location to access files.
It's not that bad. The app has to have the ability to accept data from another app. The latest memory dongles come with an ios app to access the external storage. You then transfer the pdf from dongle's app to your app. If your app can accept data from dropbox, it will be able to accept data from the memory dongle app.
Other solutions:
== "GoodReaderUSB is a practical and useful application whose main purpose is to help users transfer files and folders from their mobile device to PC effortlessly. It helps them to move and backup important data from their Apple device via a USB cable."
http://www.softpedia.com/get/IPOD-TOOLS/Multimedia-IPOD-tools/GoodReaderUSB.shtm l
== "iExplorer's disk mounting features allow you to use your iPhone, iPod or iPad like a USB flash drive."
http://www.macroplant.com/iexplorer/

Firefox crashes - even when not using the computer

Firefox crashes - even when not using the computer
Sometimes I can walk away from the computer and only have one tab open (e.g. Facebook) and when I come back to the computer a few hours later, Firefox has crashed for no reason.

Unfortunately the linked crash report is empty (@ EMPTY: no crashing thread identified; corrupt dump) and doesn't include any data, so it is not possible to find the cause of the crash.
Did you recently submitted other crash reports that were submitted and show a crashing thread?
See:
*http://kb.mozillazine.org/Firefox_crashes
*https://support.mozilla.org/kb/Firefox+crashes
Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
*Do not click the Reset button on the Safe mode start window or otherwise make changes.
*https://support.mozilla.org/kb/Safe+Mode
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
Create a new profile as a test to check if your current profile is causing the problems.
See "Creating a profile":
*https://support.mozilla.org/kb/profile-manager-create-and-remove-firefox-profiles
*http://kb.mozillazine.org/Standard_diagnostic_-_Firefox#Profile_issues
There may be extensions and plugins installed by default in a new profile, so check that in "Tools > Add-ons > Extensions & Plugins" in case there are still problems.
If the new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

Officejet 4630 printer makes high pitched whine even when not printing

I just bought an Officejet 4630 printer for home use and noticed it makes an annoying high pitched whine whenever it's not sleeping, even when not printing. Is not very loud, and would not be noticeable in an office environment due to ambient noise, but is obvious in a quiet home environment. Is this normal for this model or is the unit defective? Neither of my two previous inkjet printers made this noise.

Hello,
If your OfficeJet 4630 is within the standard warranty period, please contact HP technical support to speak to one of our agents who can troubleshoot and diagnose this issue.
We look forward to your response,
Best regards,
Jeff Christopher
Executive Customer Relations
Hewlett-Packard Company
Palo Alto, California
I work for HP

Macbook air runs hot and makes noise like processor running hard when connected to display - even when not actively using air book

macbook air runs hot and makes noise like processor running hard when connected to display - even when not actively using air book

You could use the free tool iStat Pro to see what changes when you connect your MBA to the display. Without doing anything the CPU pane should show a high percentage for "Idle". If the idle value is too low, launch the Activity Monitor and sort by CPU usage. There is a pane showing the different temperatures of your computer. Watch them for a few minutes after connecting the display.

When I burn a disk from my playlist the songs are out of order. How can I fix this? Thanks!

When I burn a disk from my playlist the songs are out of order. How can I fix this? Thanks!

I'm not 100% sure but I think you create your play order manually then select the playlist, right click it (or use ctrl+click) & select "Copy to play order".
I think when you burn that playlist it should obey that order, it has been so long since I made a mix CD that I'm not certain, good luck.

I give up!!! iDVD will not burn a disk

I will try to give as much information as I can. I have been struggling with iDVD for a couple weeks. It will not burn a disk that has a complete menu. Let me explain. I've been testing it to see if it would burn a disk at various stages of development. It will burn a disk if I just import the video to iDVD with no menu. It will burn a disk with partial menu and chapters. But it will not burn a disk if I have an entire menu, with all the chapter markers, drop zones filled and music.
Help, please.
Thank you!!

Hi
Yes - info - but not really the one I would need. There are so much that can go wrong and in different layers (steps of progress)
A. First - What You feed iDVD - QuickTime-player can open and play so many more VIDEO-CODECs than iDVD ever can use (it is very picky)
B. There is the notorious - iDVD BUG - that set's of by going back to Video-Editing program (iMovie, FinalCut or whatever) - then returning to the iDVD project. iDVD will notice but non of the alternatives works - I create a brand new iDVD project - only safe way for me - AND THEN NO RETURN AT ALL !
C. What other material is used - for menus as Music, Photos and small Video sequences
D. What Theme was used
BTW - Creating a DVD without a Menu - You must be the only one I've ever heard that was able to do this - It is an often discussed topic here.
E. And if Your project now runs OK in iDVD - SAVE AS A DISKIMAGE (File menu down to bottom topic)
F. Does this .img file run OK (Simulated DVD)
G. Burn it with Disk Util tool.
H. On What BRAND and Type of DVD ? I only use Verbatim DVD-R (SL-Single Layer)
You see - that it is this kind of info that helps me to make, may be good Guessing's.
Yours wanting to be of help - Bengt W

No option to select Blu-Ray folder as source when trying to burn to Blu-ray disc

Hello,
I've created a project at home that I want to put on Blu-Ray. At home I don't have a Blu-Ray burner so I created a Blu-Ray Folder in Encore and brought over to a friends house to burn using Encore. But in Encore it doesn't have the option to select Blu-Ray Folder as a Source, only current project or disc image. I know when doing this with a DVD it gives the option for current project, disc image AND DVD folder. Why not for Blu-Ray? Anything I can do with out having to redo as a Blu-Ray disc image? Thank you

Can't speak for Blu-ray, but with DVD, it is very important that the disc be burned as "DVD Video". For instance in Windows, if you simply drag the VIDEO_TS folder to a blank disc and burn as "Data", it is not going to play in most DVD players.
A computer will usually recognize the content of the disc as being DVD material and will likely play it. But DVD players are expecting a disc formatted a certain way, which a data disc is NOT, and therefore will not play the "data" disc.
A lot of the newer DVD players will play more types of media, such as MP3 and stuff, so possibly more of them would now recognize a VIDEO_TS folder on a data disc, but to do it right, you must burn as a DVD Video.
Most disc burning software will offer options of "DATA" or "DVD VIDEO" because there IS a difference in track layout, and there is special info written to disc that identifies it as a "DVD" also.
In the case of creating a Disc Image, or .iso file, from Encore, then that is a "snapshot" of the DVD with all the right stuff in place, so any software that can use an .iso will make a proper DVD. But again, you cannot just burn the .iso file straight to a disc as data, the software must be capable of creating a disc from an Image.
Hope this makes sense
Thanks
Jeff Pulera
Safe Harbor Computers

Blu Ray playback skipping even when not burned to disk (CS6)

Similar Messages

Maybe you are looking for