Blu-ray problems with GT70 Dragon 2202 edition

I've had the laptop for a couple of months now and things seemed ok. I would say in the last couple of weeks I've noticed an increasing number of blu-ray discs that the drive has a problem with reading... it's really slow to 'explore' them. I have powerDVD v13 and that will tell me the bluray is corrupted when trying to open it. I have absolutely no problems with regular DVDs, just blu-rays seem to have a problem.
I found on the MSI support site a tool to upgrade the DVD to a newer firmware version for what seems to be this very problem but that didn't help.
I'm just concerned that this seem to get progressively worse over the last couple of weeks vs always being like this.
Any thoughts ?

After talking to tech support (only option they suggested was doing a full system restore - which didn't help) I submitted for RMA on the 1st. Hopefully they will put another brand of bluray in. Doing some google searches on the TSS model it shipped with shows many complaints about either the drive not reading DVDs or Blurays after some time.

Similar Messages

How do I make interactive DVD/Blu-Ray menus with motion?

So, adobe doesn't support Encore anymore which means I can't use dynamic link to AE to create interactive DVD/Blu-Ray menus with motion.... or can I? Is there something I'm doing wrong? While in Encore, I go to dynamic link and boom, dynamic link to AE is not highlighted. If I can't make an interactive menu with motion using adobe, then what can I use? This is causing a major problem for me and my clients. (if i over looked the answer to this in another post, my apologies)

You can use the "Create After Effects Composition." This prompts you to create an independent version of the Encore PSD menu file, and opens the layered file in AE CC and creates a new composition with appropriate settings. AE no longer has mpeg export, so you export from AE to AME.
There were some workflow options that I did not play with much, but they were never what I saw as the basics for using AE to create the motion background.
You need to understand these two help pages:
Adobe Encore * Menu timing and looping
http://help.adobe.com/en_US/encore/cs/using/WSF49EA5DB-3743-49c2-9831-F66328B192F8.html
Adobe Encore * Using After Effects to enhance menus
http://help.adobe.com/en_US/encore/cs/using/WSA5513911-0AD1-440c-BDAD-2E0E806B425E.html
I'm not sure what you mean by "interactive" unless you just mean creating navigation.

How to burn blu ray disc with H264 files and ac3 files?

Hello,
I have tried many times to burn a bluray disc with FCP and compressor and they always end up not successful. After spending days on testing different settings, I finally managed to only get it to work if I tried
1) outputting to Hard drive as opposed to burn to bluray
2) Turning the default bit rate down from 35Mbits to between 15-19Mbits.
Then I used either disk utility or toast to burn the disc image onto the Bluray disc.
I have however on a recent job forgotten to switch the setting on compressor to output to harddisk and instead set it to burn to Blu-ray. Big mistake. Again I end up with a h264 file and an ac3 file, and nothing I can do with them after 24 hours of rendering. Oddly, the compressor says "successful" but nothing is created but that 2 files.
My question is (before I restart the whole 24hr rendering process again) - is there anyone who can help me use the .264 file and the ac3 file and create the blu-ray disc with the menus again without having to re-render all over again? I have not been able to find anyone to provide me with a solution or find any where online that helps with that.
Desperately ...
Yee-wei

Hello,
Sorry but the instructions in the manual (online and offline) do not answer my question. Yes I do have a bluray burner, it is a matsushita BD-MLT SW-5584. I wrote in my post that when I set it to output to HardDrive, it will create a dmg file nicely for me to burn using disk utility or toast.
But when set it to burn to Bluray disc, nothing gets done. I just want to find out, with the h264 file and the ac3 file that gets created in the process of creating the dmg file, can I still burn the disc or create a dmg file from them without having to re-render the whole thing again.
Maybe you never tried burning a Blu-ray disc with FCP or compressor before. Let me explain how it works. When you submit the project to process, it will create 2 files - 1 ac3 audio file and a .264 file. After that 2 files are rendered (which takes 24hrs for my 2hr 30min HD clip), it will use that 2 files to create your Bluray disc or your dmg file. Problem occurs when it doesn't burn the disc and you are left with just the 2 files that cannot be used to burn the project again. My question is : is there anyone who knows how to set the compressor to see that the 2 files are already created and just continue to create a dmg file?
Hope my question is clearer now.

Is Sony 3D Blu-Ray compatible with passive 3D HDTV?

Sony 1000W 5.1-Ch. 3D/Wi-Fi Blu-ray Home Theater System
Model: BDVE780W | SKU: 2024262
Take your entertainment experience to a new level with this home theater system that features a 3D-capable Blu-ray Disc player and 5 speakers with Dolby Digital and DTS decoders. The built-in Wi-Fi allows you to connect to your home's wireless network. To build a complete 3D home theater system, you'll also need a 3D TV, 3D glasses designed for the TV and high-speed HDMI cable. Smart Audio Get a world of instant entertainment with this smart audio product. Connect to the Internet and stream movies, listen to music and access a wide variety of other content through your HDTV. Learn more about smart products. Netflix Pandora YouTube
4.4 Read reviews (22)
Sale: $399.99
Dec 3 2011:
I bought a Sony BVD-780W 3D Blu ray home theater in a box at Best buy, but can't display a 3D Blu-Ray on my Vizio  E3D420VX passive 3D TV.   After talking with tech support at both Vizio & Sony, but not getting a definite answer from either.
I can play 3D content using the Sony 3D online apps included with the home theater, so I don't think the problem is the TV or the HDMI connection.
Has anyone figured out if or how to play 3D Blu-Rays with a Sony 3D Blu-Ray player on a passive 3D TV?
There seems to be a communication stand-off between the TV and the Blu-ray. Vizio tech support told me that as soon as the TV senses 3D input, it will switch to 3D mode, but Sony says the player will not play 3D unless it detects a 3D TV.
I wrote more about the specific situation on my blog and included more screenshots here: iCoolSpark blog.
Chuck A
Solved!
Go to Solution.

Dec 4, 2011 - After my 2nd contact with Vizio tech support and my 3rd contact with Sony Support and some additional trial and error, I am now able to get the 3D Blu Ray to play with my passive Vizio 3D TV.
Here is the support request I sent to Sony Support (my third contact with them on this case - with personal info removed for privacy)
Product Group: Sony
O/S : Select Your Operating System
Model : BDVE780W
Question : ref EventID #E####### I can't get 3D on a Vizio E3D420VX passive 3D TV from the 3D Narnia Promo blu-ray provided with my BVD-780W home theater. I think the 3D TV & 10.2 Gbps HDMI connection are OK because I can display 3D content from the Sony 3D Experience online app. The integrated 3D blu-ray player seems to require an active shutter synch signal from the TV before it will play 3D. Is there a firmware upgrade planned to fix this limitation?
Here is the response received from Sony - which is very close to providing the answer, but not quite right, and not enough to solve the problem.
Thank you for contacting Sony Support.
I'm sorry that there in no 3D when playing back the 3D disc in the 3D Blu-ray Disc Home Theatre System. Based on the information you have provided, I suggest that you set BD output to 1080P. Please follow the steps mentioned below to set BD output to 1080P:
# Press the HOME button.
# Select Settings .
# Select Screen Settings .
# Select BD/DVD-ROM 1080/24P Output.
# Select Auto.
# Press Enter.
If the issue is unresolved, please contact our telephone support staff who will be happy to provide further diagnosis and assistance at: (800) 222-7669 or (239) 768-7669 Intl
Currently, I do not have any information on future firmware upgrade.
Thank you for your time.
If you would like to be the first to know about our latest products and receive exclusive offers, please sign up for our newsletter:
The Sony Email Response Team
I looked at this setting when I received the above response, and found the BD/DVD-ROM 1080/24P Output was already set to "auto" . It didn't occur to me immediately to try setting it to "off", however, after 24 hours with no solution I decided to try turning that setting off to see what would happen, and guess what? PROBLEM SOLVED!    Here is what the setting looks like on the screen.
Now when I play the 3D Blu-Ray, the menu comes up with 2-D or 3D. I can select 3D, the TV auto detects 3D mode and I confirm. I get a message to put on the 3D glasses and I'm watching 3D Blu-Ray on my Vizio!
I'm glad that my initial hunch about the blu-ray player looking for an active sync signal was wrong!
Chuck A

Has a stop marker any function when burning blu-ray discs with Premiere Elements 12?

Stop marker when burning blu-ray discs with Pre 12. Does it works?

Amiral
No.
This applies to Premiere Elements any version.
Stop markers placed on the Premiere Elements Timeline destined for burn to Blu-ray disc format on Blu-ray disc are not recognized at playback of that disc using the Blu-ray player.
If you need Blu-ray disc with stop markers, you can export your Premiere Elements Timeline content to an appropriate file type that will be compatible with a 3rd party software which will get the job done. I have heard that a software such as DVD Architect can do that, but I have not been there and done that.
Stop markers function at playback of DVD-VIDEO on DVD disc only. And, never place a stop marker at the end of the last item on that Timeline.
http://help.adobe.com/en_US/premiereelements/using/WS09e4b3c48f3a79fc19b622510385d4355c-7e 19.html
Please do not hesitate to ask if you need clarification on anything written.
Thank you.
ATR
Add On...I have found that the situation is the same for stop markers and AVCHD on DVD and Blu-ray disc format on Blu-ray disc.

Workflow asked: 70min hd project (PAL 1080i50)to blue ray disc with toast 11

i tried to render a final cut Pro HD project (PAL 1080i50) into a blue ray disc with toast 11.
At the end camera pans juddered in a fast rhythm
My steps are:
build a HD timeline in FCP
export timeline to a quicktime movie
load the quicktime movie in Toast 11
toast dit convert the qtm-file again
and burned the blue ray with the result described above.
Thanks for answers

Please examine my workflow. Perhaps you quickly find out any error:
footage: PAL 1080i50 field order : lower field
70 minutes sequence: the same options
exported timeline into a Quicktime Movie - same option
loaded the resulting QTM into Toast 11
Tost started to rerender during 2 hours and burned blue ray disc
at last
medium: verbatim double layer blue-ray disc
Player: tested on two Philips blue ray players
Result
on tv-screen (hd flat screen philips) camera pans judder in a regular rhythm, perhaps twice in a second: the actor seems making little jumps when he walks silently from the right to the left or vice versa.
earlyer we tried to burn a blue ray disc directly from FCP 7.0.3 by using the option "send to blue ray"
The result was the same.

HT200139 ?How can i watch a blu-ray disc with my iMac

I accindentally bought a blu-ray, ok, but now I see it... How can i match a blu-ray disc with iMac?

Youneed some bluray software such as this:
http://www.macblurayplayer.com
I use and it seems OK, plays a wide variety of formats.
Al

Problems creating Blu Ray Discs with AME Presets in CS4

After several weeks wasted (months back) with an ATI 5750 graphics card in Win 7/and CS4 (not working correctly) - I finally resolved by swapping with a NVidia GTS250 card .....but all my troubles are not over yet ....
I'm running Premiere CS4 and have finally just got down to testing creation of a Blu Ray test disc from some AVCHD 1920x1080 HD footage I am editing from my new camera.
My work in CS4 is just testing at present as I used to use CS3 [still have on my dual core machine with Matrox RTX2] - and have successfully created Blu Ray discs from HDV material in CS3 - but using Blu Ray MPEG 2 settings.
New machine Win 7 - 64 bit
Premiere CS4 is at 4-2-0 version
Encore at 4-0-1 version
These are the last updates
I've selected a short test piece (about 2 mins)on Premiere timeline and initially tried Media export using Adobe Media encoder.
I selected H264 BluRay codec in media encoder. Hi quality 1080 25 fps.(PAL)
This creates dual MP4 Video and Audio streams
Encode process goes OK, just slightly slower than real time, (I'm using i7-930 Quad Core and Win 7 64 Bit)
Now - when I come to input the encoded video file into Encore as an Asset - Encore freezes and the whole machine locks up !!!
Audio file imports OK but the Encore software does not like the encoded Video file
I've re-installed Premiere and Encore twice in case of bad install. It wasn't that.
I also found Adobe Media player couldn't play the file created by AME either - but it would play on a Premiere timeline?
So is Adobe Media encoder messing up here ?
So - .....3 hours of testing later ....I stumble on a Support thread from someone on the Forum that they found AME preset has "HIGH" in the Encoding Profile Preset - when it should be MAIN ?.
Not sure what these settings do - but tried changing that parameter and re-encoded the Video file with H264 BluRay setting - all to no avail as when I try importing again the machne just locks up ?
My final search in Premiere help file about creating BluRay discs ONLY talks about using MPEG 2 BluRay setting for creating BluRay discs
It does not specify H264. Why is that?
Can one of the moderators / experts confirm if H264 Blu ray format is supported for BluRay disc creation in CS4 please??
Better still please tell me the exact settings for Adobe Media encoder so it will import into Encore without having to be transcoded again.
H264 should work - yes ?
Final comment
As an alternative method, I tried sending the short timeline in Premiere (using Dynamic Link) to Encore to test that route for making a BluRay disc
Bearing in mind the sequence is only about 2 mins long - when I ty to Transcode using the engine within Encore - the process takes a ridiculously long time and twice it has crashed just before the end of the process......
Can someone explain why the encode process in Encore takes such a long time as I thought it used the Adobe Media encoder engine as well.?
Adobe Media Encoder is much faster used stand alone mode.
Encore seems to not use that ?
Anyway - conclusion is that using Encore to encode the tmeline is a non starter as it takes too long.
why so slow on such a fast machine?....I know HD encoding is demanding but not that demanding with a decent machine.
So the question is ....
How do I encode in the most efficient and fastest way possible (using H264) for Blu Ray authoring into Encore without need for more Transcodes?
Any help or suggestions welcome as I'm now hitting my head against the wall :-)
I have not gone through Adobe Support desk as it is usually a waste of time.{Dear VP of Adobe Customer Service - please do get this sorted out in the near future if you want to retain loyal customers....}
I cannot believe how disappointing CS4 is turning out to be.
After investing in a very fast PC machine etc the whole user experience is somewhat of a let down.
Why so many issues for such a small test??

Picking up on my original post about H264 - as I have a dual boot machine I also have a clean installed Win 7 /64bit partition which I use for general bits of work.
On that I have CyberPowerDVD SW installed which plays all Video files fine including BluRay material etc.
Interestingly when I try to play the file that AME has created from the BluRay H264 preset it says 'It cannot play the file as it is a format it does not recognise...'
This is really weird and would suggest AME is not encoding the file corrrectly??
I have already removed and made a re-install of CS4 on my main [video editing] partition but there were some fragments of CS4 left intact
How do I completely remove everything?
I tried the CS4 clean script but it said it relied on Microsoft CLean Up utility and gave a link
When I loooked on Microsoft web site the link to download it had been removed?
Also Adobe say the CS4 remove script is no longer supported ?
Can anyone advise on the correct tool/procedure to completely remove CS4 from a Win 7/64bit installation so I can then try re-install of CS4 one more time....in case the installation is corrupt in some way
I can't explain why I am having this problem otherwise if other people find AME encodes OK with H264 BluRay preset.

Problems Creating a Blu-ray Disc with a Main (Static) Menu and Pop-up Menus

I'm having problems creating a simple Blu-ray disc containing a Main Menu (Static Menu with a graphic for my background) and a single Pop-up menu assigned to all of my timelines. I wouldn't think this would be so hard to create but every attempt I've made ends up with the navigation getting all messed up to the point that my Playstation 3 doesn't even recognize that the disc as being Blu-rey disc.
I want a simply static Main menu containing a "Play all" Button, and a button for each additional timelines. Im also using the override commands on my buttons so if someone just chooses to see one specific clip from the main menu, they will be taken back to the main Menu after their selected clip plays. But then I also want a Pop-up menu assigned to the timelines so the viewer can switch to a different clip (timeline) without having to go back to the Main (static) menu.
My Blu-ray Disc runs just fine if I only use a static menu in a project, or if I only use a single Pop-up menu assigned to each timeline, but not both a Static Main menu, and pop-up menus. I'm using CS4
Thanks.

it's just copying files to it, not video. If you put a blank blu-ray disk in the drive, it may show up in the finder. A program like Toast can burn a blu-ray.
http://www.roxio.com/enu/products/toast/titanium/overview.html

Problems burning Blu-Ray DVD with Encore CS6 Creative Cloud version

I recently installed Premiere Pro CS6 from Creative Cloud on a high performance PC. Everything works fine but Encore Blu-Ray burn will not finallize... get error message after most of disc is burned. Have tried several burns without success. Same files burn okay with Cyberlink software. Seems to be a bug with CS6 Encore files.
Have tried with Cyberlink removed from machine.... same problem.
Any suggestions??

The error is: Blu-ray Error, "device error", Code "3", Note, "AS-StorageError = 97071
I imported one HD Blu-Ray MPG file encoded in Premiere Pro for Blu-Ray DVD about 4GB in size. It was set-up with simple "Play menu". It burns up to the point of finalization, then the above error message occurs.
I insstalled a second Blu-Ray burner (different brand) and attempted another burn but with same error message. Also tried different brand of discs.
I have a second computer that I had previously loaded the trial version of Permiere Pro CS6, then later opted to do complete install via Creative Cloud. CS6 Encore will burn a Blu-Ray disc on this system with the same file without any problem or error messages.
It seems to be a problem with the Creative Cloud installation on the first computer???

Blu-Ray Problem of Menu

     First I want to apologize for my English.
     I do a project in Encore CS5 (5.0.0.508) of 4.7 or a DVD 8.5 GB PAL 720x576 5 stars it works in any DVD player. I do blu-ray PAL 1280x720 movie of the same menu of the Display is green and does not see the display of menu buttons, I've done with one with a photo (still image), with pounds of Encore menus with motion, as the codec used H .264 and MPEG2 codec and is equal. and the preview work
     But the menus are the same as 4.7 or 8.5 Gb '. But when I do the blu ray and burn the ISO menu is green but the film is direito.por it owes nothing to do with the layers
open a menu of any library in this case was the encore wedding montage Wide Menu. edited in photoshop to 1280x720, 1280x1024, 720x576 and it was the same green screen and the Butterfly clearer in the chapters but not read.
     The format of the project is 1280x780 50 fps PAL. I've worked with cs4 work right and never had this problem since I upgraded to BR cs5 never worked.
     This is the print screen of Blu-Ray
Matrox rtx2 (5.1.2.18)
Win 7 Ultimate 64 bit SP 1
Intel Core i7 CPU 920 @ 2.67GHz
12GB RAM

ok
I hope to see you and sorry
print screen Main menu preview Photoshop
print screen Photoshop chapters
print screen Encore 01 CS5
print screen project settings Encore CS5
print screen Main menu preview Ctrl+Alt+Space
thank you

Menus Blu-Ray Problem

Good
I have a problem here that is as follows.
First I want to apologize for my English.
I do a project in Encore CS5 (5.0.0.508) of 4.7 or a DVD 8.5 GB PAL 720x576 5 stars it works in any DVD player. I do blu-ray PAL 1280x720 movie of the same menu of the Display is green and does not see the display of menu buttons, I've done with one with a photo (still image), with pounds of Encore menus with motion, as the codec used H .264 and MPEG2 codec and is equal. and the preview work
Someone help me please

Good
I have a problem here that is as follows.
First I want to apologize for my English.
I do a project in Encore CS5 (5.0.0.508) of 4.7 or a DVD 8.5 GB PAL 720x576 5 stars it works in any DVD player. I do blu-ray PAL 1280x720 movie of the same menu of the Display is green and does not see the display of menu buttons, I've done with one with a photo (still image), with pounds of Encore menus with motion, as the codec used H .264 and MPEG2 codec and is equal. and the preview work
Someone help me please
I open a menu of any library in this case was the encore wedding montage Wide Menu. edited in photoshop to 1280x720, 1280x1024, 720x576 and it was the same green screen and the Butterfly clearer in the chapters but not read. The format of the video is 1280x780 50 fps PAL. I've worked with cs4 work right and never had this problem since I upgraded to BR cs5 never worked.
Matrox rtx2 (5.1.2.18)
Win 7 Ultimate 64 bit SP 1
Intel Core i7 CPU 920 @ 2.67GHz
12GB RAM
Message was edited by: Silva Luis

FCPX Blu Ray problem

Hi all!
I have filmed and edited in HD etc and built both a SD DVD then a BR DVD made the menu in FCPX then send
it to the haed drive as a img file for testing and burning using toast.
The SD DVD has come out well and plays no problems. I am using Tayo DVDs and Tayo BR-
Now when I put the BR disc in my BR DVD player before it comes to the menu I get a bit of a green screen, then a flash
of white noise then the menu comes up, also when i press enter to play sometimes it misses the first 2 seconds of the film
almost if its try to get lock.
It plays the film Ok and goes back to the menu but its the occasional full green screen and white noise both for half a second
etc which makes me feel it aint right.
I have tried burning stright to disc from fcpx to remove iso and toast etc but it still happens
I went out and bought a new BR DVD player so I now have 2 to test disc on and they both do it and they both have upto date firmware,
Any solutions?
darren

I think I found the answer. Looks like Both go in the burn.
1st, sorry for the short hand speech and typos. (BDMG should be BDMV)
In videohelp form it was suggested that both the BDMV and the CERTIFICATE should be in the burn.
http://forum.videohelp.com/threads/325212-How-to-burn-a-BDMV-folder
Incase someone is searching for this same question, I thought I'd give the answer I found and break it down a little further.
Q: How do I output to Blu-Ray in Final Cut Pro X? I don't see a Blu-Ray option.
A: In 10.0.8 that option is hidden from the main "share" menu.
Here is Apples "how to" page on how to find it, along with other info on Destination Prefs:
http://support.apple.com/kb/PH12718
Basically you select Share, then the plus sign "Add Destination" located at the bottom of the list, then Blu-Ray.
When you select Blu-Ray, in the preference window, the first pref. is "Output device" with two options your burner or hard drive. If you pick hard drive you get a .IMG that you would open and place the contents into a burn.
Q: What Blu-Ray burner is in your Mac?
A: a Panasonic UJ267
Very overpriced and had to modify (voided the warranty) in order for it to fit in my 15-inch, Mid 2010 MacBook Pro.
I switched one of the covers on the Panasonic with my existing to get the right fit. One screw hole had a "no tamper" label that I destroyed, so that voided my warranty.
Q: why not an external?
A: I have one but it's big and needs AC power so it's not easy to move.
This is soooooo much easier because it's so mobile.
24 Gig backups of all my stuff for a $1 per burn is priceless.
Best of luck!

Hp dv7t 4100 cto entertainment notebook pc blu ray problem

Hi i have a hp dv7t 4100 cto laptop .. i have windows 7 home premium os it read s all the disc i inserted..
but when i insert a new empty disc it is not at all reading or responding.
the same thing happens when i insert blu ray discs
i cannot write in cd/ dvd s due to this problem as it is not reading empty discs
i have cyber link power dvd and nero blu ray player
but still no response for blu ray and empty discs
what can i do now
i have no HP service centres near by
please solve my issue

Hello velshankar,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
I have read your post on how your notebook is not able to read Blu-Ray discs or burn DVDs, and I would be happy to assist you in this endeavor!
For burning software onto different media, I recommend following this document on CD or DVD Cannot Burn Discs (Windows 7). This resource should help enable your computer to burn software onto DVDs.
In regards to reading Blu-Ray discs, I suggest following the steps in this resource on Resolving DVD and Blu-ray Movie Problems (Windows 7). This should help with reading your Blu-Ray movies on your notebook.
Please re-post with the results of your troubleshooting, and I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Creating Blu-Ray DVD with Final Cut Pro and Adobe Encore

Hi all,
I am one of many with troubles creating a blu-ray DVD using Mac software. Sounds like the best way to do this is to do all of the editing in Final cut and create the DVD in Adobe Encore. Is there a way to export to Adobe Encore or should I just create a .mov file and import that to Encore. That way I think I lose the HD quality. I read that I could compress to Blu-ray format in Compressor, but I can only find HD DVD which is different. When I select create a Blu-Ray disc, Compressor won't simply create the file on my computer...it wants the disc to create.
Maybe I am a little to new at this to fully understand, but why in the heck doesn't Apple get with the times and create a DVD authoring program that makes Blu-Ray?
Thanks for any help you can offer.

I have just completed my first blu-ray disc using FCP7 and Adobe encore. My workflow, once the timeline was complete, was to go to File>share>choose blu-ray as destination >export. The default encoding is H.264 along with an ac3 file for audio. It took 3 hours and 35 minutes to encode the 1hr 26 minute file.
Opening encore, confirming you settings for HD, and choosing file>import>as asset each of the files (separately, of course). Encore imports them, then under Timeline>create new, then drag the files to the timeline. CLick on the build button and you are there. I did not mention that my original render was Prores422, but that should not matter here. No trouble with burning the Verbatim 25Gb disc.
Encore will recognize that these files do not need re-encoding and burn the disc. It took 1 hour and 40 minutes to burn a 1 hour and 26 minute (17+ Gb) movie on an i7 iMac with an OWC 12x BD burner.
Hope that helps

Blu-ray problems with GT70 Dragon 2202 edition

Similar Messages

Maybe you are looking for