Blu-Ray Project question

Hi,
I recorded with a professional Sony HXR-NX5E camera a video. The recording time should be around 130 minutes.
I have files from 00000.MTS to 00010.MTS with a total disk space of 19,60GB
Now, I wish to create a DVD and a Blu-ray media and would assume all I have to start with is creating a correct project like this one:
PAL AVCHD 1080i 25 (50i). Is this correct so far?
Now my problem is trying to understand, up front, if i will be able to fit this project into a Blu-ray disc like this one (Verbatim BD-R SL Datalife 25GB 6x Wide Inkjet Printable).
I tried to run an export and selected H.264 Blu-ray but the output file is 226922 MB which is way too large and was puzzled if this will work or not.
Please note that I have not created any Blu-ray project before. (any reference guide you can provide me with will be of great help).
Can someone please guide me through trying to understand if I can fit this video into 1 Blu-ray disc? Perhaps at the time of creating the Blu-ray disk it will shrink it down?
Thank you
NOTES
Here is the info taken from one of the .mts files:
Format                                   : BDAV
Format/Info                              : Blu-ray Video
File size                                : 1,98 GiB
Duration                                 : 12min
Overall bit rate mode                    : Variabile
Overall bit rate                         : 22,3 Mbps
Maximum Overall bit rate                 : 24,0 Mbps
Video
ID                                       : 4113 (0x1011)
Menu ID                                  : 1 (0x1)
Format                                   : AVC
Format/Info                              : Advanced Video Codec
Format profile                           : [email protected]
Format settings, CABAC                   : Si
Format settings, ReFrames                : 2 frame
Format settings, GOP                     : M=2, N=13
Codec ID                                 : 27
Duration                                 : 12min
Bit rate mode                            : Variabile
Bit rate                                 : 21,2 Mbps
Maximum bit rate                         : 22,0 Mbps
Width                                    : 1.920 pixel
Height                                   : 1.080 pixel
Display aspect ratio                     : 16:9
Frame rate                               : 25,000 fps
Color space                              : YUV
Chroma subsampling                       : 4:2:0
Bit depth                                : 8 bit
Scan type                                : Interlacciato
Scan order                               : Top field first
Bits/(Pixel*Frame)                       : 0.408
Stream size                              : 1,88 GiB (95%)
Audio
ID                                       : 4352 (0x1100)
Menu ID                                  : 1 (0x1)
Format                                   : AC-3
Format/Info                              : Audio Coding 3
Mode extension                           : CM (complete main)
Format settings, Endianness              : Big
Codec ID                                 : 129
Duration                                 : 12min
Bit rate mode                            : Costante
Bit rate                                 : 256 Kbps
Channel(s)                               : 2 canali
Channel positions                        : Front: L R
Sampling rate                            : 48,0 KHz
Bit depth                                : 16 bit
Compression mode                         : Con perdita
Delay relative to video                  : -80ms
Stream size                              : 23,3MiB (1%)

Hello friend, generally you can put only 120 min on a bd of 25gb, the real capacity of an bd 25 gb is 23gb, you can put all the video in but u have to tweak your video bit rate when you export your video , i have to export a 129 min timeline with a variable bitrate of 20 and max bitrate of 22 and someday i get lucky somedays not, you will have to learn how to use a bit rate calculator , (google it) cause i dont know it,  so i fine tune video bitrate until it shows me my final render around 19-20 gb or maybe less to be sure choose on sound a lower bitrate 320 or maybe lower and dolby digital and try to mux them (multiplexer option select TS). This is my workflow in general...
U can see that in your video info that your video haves now :
Bit rate                                 : 21,2 Mbps
Maximum bit rate                         : 22,0 Mbps
and only 19 gb
Adobe preset is hd 25 i and tries to make a video with target bitrate of 25 and max 30, so it will render more ....

Similar Messages

  • Has anyone been able to export to flash using a Blu-ray Project in CS3?

    Has anyone been able to export to flash using a Blu-ray Project in CS3?
    If so what files, settings and OS were you using?
    Whenever I try to export to flash from a Blu-ray project the program always crashes.

    S&G wrote:
    Eric Root's posting  answered my question. He said to downlaod DiskmakerX. It worked like a charm to create a bootable Mavericks Installer Flash Drive.
    tips on use: https://discussions.apple.com/message/18705466

  • DVD Remote "skip" Function Doesn't Work for Blu-ray Projects (CS5 Encore)

         I have graduated from SD to HD and I need help.
    I just finished my first HD project in CS5, burned it to a Blu-ray disk and immediately encountered a problem: the skip forward and the skip backward remote functions don’t work. (I have encountered several other problems on the way to get here but I solved those with the help of the manual and by browsing this forum ). In this project, I am doing exactly what I have done in my previous SD projects (where this function works):
    In CS5 Encore, I added “Chapter Points at Intervals…”.
    On the timeline Properties Panel, I kept the default selection “Operations: All Permitted” (that includes “Search for Chapter” in the “Permitted User Operations” menu).
    In the “Project Preview” window, clicking on the “Next Chapter” or “Previous Chapter”, the function is executed correctly.
    Still, after burning the blu-ray disk and pressing the “skip forward” or “skip backward” buttons on the Blu-ray player (Panasonic DMP-BD65) remote, the “Operation is not permitted” message appears. (This very remote button function works on all my SD projects.)
    More background info: I am also using Encore Chapter Markers from the PrPro project linked with Adobe Dynamic Link, chapter marker End Actions (Jeff’s The Focal Easy Guide to Adobe Encore DVD 2.0, pp. 178-180), and Bill’s advice on using the “dip to black” transition to avoid the ~1 second gap between chapters in the Chapter Playlist that I use to play all chapters.  The following observation may be unrelated: in Encore’s Monitor Panel, the “Step Forward” button with pressing the Alt key does not move the CTI to the next GOP mark. The “Step Forward” or “Step Backward” functions (without pressing the Alt key) work (moving the CTI one frame)..
    At this point, I desperately need the Forum’s help.
    Thanks,
         - Laci.

    Up to now I worked only with standard definition projects and outputted them
    to DVDs. This is my HD project. My problem is that I am a bit confused with
    the proper (and simple) settings for a blu-ray project. Your
    questions/comments imply that I am making a "DVD project" - but then, how
    can I burn it to a BD?
    Here is what I am doing, and please, let me know if/where I am making my
    mistake:
    1.       On the camcorder the recording format is set to "AVCHD 1080/60i
    HA".
    2.       In the CS5 PrPro new project:
    a.       General > Capture Format: HDV
    b.      New Sequence > Sequence Preset > AVCHD > "AVCHD 1080i30 (60i)".
    3.       In Encore: File >  Project Settings > Basic:
    a.       Authoring Mode: "Blu-ray"
    b.      Transcode Settings: "Codec: MPEG-2; Dimensions: 1920 x 1080; Frame
    Rate: 29.97, Fields: Upper Field First, Audio Transcoding Scheme: Dolby
    Digital, Maximum Audio/Video Bitrate: 15.0 Mbps"
    c.       In the "Default Transcode Settings" window, the Blu-ray tab is
    highlighted. (There, I could change the codec from MPEG-2 to H.264 -
    according to some articles it would give slightly better quality in certain
    circumstances - I don't know.)
    d.      On the Encore Project Panel, right clicking on the sequences, and
    choosing "Transcode Settings" from the menu, I get a window that says "DVD
    Transcoding" and "Blu-ray Transcoding". In the Blu-ray Transcoding section,
    I choose Codec: MPEG-2, Dimension 1920x1080, Frame Rate: 29.97, Quality
    Preset: Automatic Using Project Settings.
    e.       Going into the "Edit Quality Presets", I change the "Export
    Settings Preset" to "1920x1080i 29.97 Maximum Quality" (from the 1280x720)
    4.       Now, in the Project Panel, under the Blu-ray Transcode Settings I
    see: "1920x1080i 29.97 Maximum Quality MPEG-2".
    Are these the correct settings for a high quality Blu-ray project? I am
    re-transcoding the project with these settings to see if I still get the bad
    transitions.
    Thanks for your advice,
    Laci.

  • CS6 Error Message When Burning a Blu Ray Project to DVD

    Hi,
    I'm trying to burn a Blu Ray project to DVD and I'm getting this message when I try to build the project:
    The project is an excerpt from a larger one and contains only 2 video files and no menus. However it's particularly worrying because the project from which this is an excerpt is large and complex. I have created it as a Blu Ray project but my final deliverable is DVD. I really don't want to have to rebuild as a DVD project because it took half a day to link up all of the menus and chapters.
    Is there something I need to do in my encode settings?
    Thanks in advance.

    Thanks for your reply John.
    It's extremely frustrating that this is the case. I'd have started with a DVD project in the first place had I not read this: http://helpx.adobe.com/encore/using/building-finished-project.html , specifically the following excerpt:
    "You can build the same project to DVD and Blu‑ray formats no matter which format you select in the New Project or Project Settings dialog box. Encore makes the appropriate adjustments to transcode the elements to the correct format."
    Reading that gave me the confidence to go ahead and build as a Blu Ray. I now have to find another half day to rebuild the project as a DVD.
    Thanks again for the information.

  • Trying to Create DVD from Blu-Ray Project

    I'm a fairly new user to Encore CS4.   I was able to successfully create a Blu-Ray project using HD video - the actual video is a little over 3 hours.   It took about 30 hours for the project to transcode and burn.   I'm now trying to take that same project and created a single layer DVD.   I'm really struggling with this even though the software says I should be able to do this.    So I set all my settings up to create the DVD and started the process.   It was trancoding the video for 6 straight days!!!!!    When it finally got finished with the transcoding process I got an error that said this aspect ration was not supported by DVD!!!   So I'm confused at what I'm doing wrong.   First, I don't think the transcoding process should be taking that long.   Second, if the aspect ration is not correct, could it tell me that before it spends 6 days transcoding the video?    Third, I'm trying to burn the DVD using the same 16:6 widescreen aspect ratio, so I'm not sure why it's telling me the aspect ratio is not correct.    But what frustrates me the most is that it took wasted days before the software told me it didn't like the aspect ratio.
    I know there's products on the market that will basically copy a Blu Ray to a DVD and are supposed to do that in something like 4 -5 hours.  Why on earth would Encore be taking 6 days to transcode my video.
    Anyway, if anyone has any ideas please let me know.
    Thanks!

    Thanks, I'll try these suggestions next.  I had found a post from "janaiott" suggesting to select "interpret footage" then choose "conform to SD NTSC Widescreen".   They said that worked for them.   This post was titled "Use the same project to export to both BR and DVD?"
    I tried that and restarted the build.  The video transcoding went much quicker - instead of running for 6 days it finished in 2 days.   However, at the end of the transcode process I once again recieved the aspect ratio error.   My exact error is:
    PGD "Sequence 01/Band.prproj" has an error at 88.8888s.  The aspect ratio of this file is not supported by DVD. - PGC info:  Sequence 01/Band.prproj =Bpgc, time=88.8888s.
    I'm still just baffled why Encore can't be smart enough to tell me it doesn't like what I'm doing before it spends all that time - what a waste of time!  I really don't mind waiting 2 days as long it works
    If anyone else has any suggestions, please post - but I will move on to the next suggestion and see what happens.  Just too bad it will take at least 2 days to know whether it works or not

  • Blu-ray project creates SD menu

    Hi guys, I've read this problem before on here a couple of years ago but cannot find it again now!
    I'm creating a Blu-ray project, I have imported a 1920x1080 jpeg as the menu background but when I right click on it and choose new>menu it creates an SD one
    how do I change it to 1920x1080?
    cheers

    maffmace wrote:
    Hi guys, I've read this problem before on here a couple of years ago but cannot find it again now!
    I'm creating a Blu-ray project, I have imported a 1920x1080 jpeg as the menu background but when I right click on it and choose new>menu it creates an SD one
    how do I change it to 1920x1080?
    cheers
    Hello
    In the lower right corner of Enc you should have the Library which has all the menus, buttons,etc.
    In the general tab you will have blank HD menus, both wide and standard and others.Pull the one you want into the project window
    and then pull your jpeg onto the blank menu.You can then scale it, or open it in PS.
    Hoped that helped.
    Kent

  • CS4: maximum buttons for a blu-ray project

    Hi,
    I've a project with 6 languages (about 180 Buttons each language).
    I burned it as a normal SD-DVD. No problems there.
    But when I tried to burn it as a BD I get a error message.
    The Original message is german and could look more or less like this in english:
    Blu-ray-Object: "<Button>Menu/1", Error: "Counter overflow", Code: "2", Message: "maximum 999 titles per project (Spec Annex B)"
    Does that mean that you can use a maximum of just 999 Buttons for a blu-ray project? Or what else could that mean?
    If I can just use 999 Buttons how should I realize a project with more Buttons? I mean, 1k Buttons are not unusual for a Service-DVD.
    Greetings from Germany
    Christoph

    This Encore FAQ Entry lists the supported BD formats in Encore.
    Good luck,
    Hunt

  • Question about custom PS menu in Encore CS6 Blu-ray project

    I can't seem to find the answer to this anywhere. My project is in Encore CS6 for Blu-ray.
    Basically, I have a documentary about a group of friends taking a roadtrip around the country. The film is broken down by days, which coincide with different cities they stop in.
    For example:
    - Day 1 they were in Atlanta, GA
    - Day 2 they were in Tallahassee, FL
    - Day 3 they were in Jacksonville, FL
    - Etc
    The problem I'm having is with the Chapter menu.
    Here's what it looks like:
    The Chapter menu it's a map of the region with the cities they stopped in and a graphic of their route with a line to each city.
    Across the bottom of the menu are the Days to select, ie Day 1, Day 2, Day 3. These are the buttons to select and are not part of the map.
    When the Days are selected with the bottom buttons I also want the cities in the map to be highlighted as well. But I can't figure out how to do this? When I bring the menu into Encore it gets all screwed up with selections all overlapping each other, because it thinks both the bottom Day buttons and the map city highlights are both buttons.
    Here's what is happening when the menu is brought into Encore:
    I only want the lower Day buttons to be selectable, and when they are chosen the city lights up as a separate informational graphic (which is not meant to be selectable as part of the button, just to provide the viewer additional information, in this case a reference on the map of where they are on each Day).
    If someone can shed some light on how to do this I'd be most appreciative.

    When the Days are selected with the bottom buttons I also want the cities in the map to be highlighted as well. But I can't figure out how to do this? When I bring the menu into Encore it gets all screwed up with selections all overlapping each other, because it thinks both the bottom Day buttons and the map city highlights are both buttons.
    When you put the red dot inside the button group for that button, you make it part of the button. That is the nature of the DVD spec. And the area of the button is defined by the whole rectangle the encloses all the elements of the button.
    The problem with BigMan's option (which is the option) is that it won't work using a mouse on a computer - a mouse rollover doesn't trigger the selection of the button. It will work on a computer when using the software player's "remote."

  • Blue Ray Project done - time for SD

    Ok I have fininshed my Blue Ray projct and made my iso. Stupid question time. Can I go to project settings and change the project to DVD to make my SD or should I start a brand new project? Thank you.

    I have not done this, and what we see here in the forums are examples of problems trying to do this.
    But Adobe has designed the Encore project settings to do just this.
    If you have popups or multipage menus, they will not work in DVD, and this reduces the chances of your saving time rather than just doing a new DVD project.
    If not, I would do a final "Save" of the BD project, change the project settings to DVD, do a "Save As" (to try to protect the BD version) into a new directory and with a new name for your DVD project, confirm the menu settings are 16:9, check the DVD transcode settings, set the build to DVD and the output to folder or image (for testing), and see what you get.
    Is anyone using the same project successfully going from BD to DVD? Are there other steps to cover?

  • H.264 Blue Ray audio question

    I have seen this question brought up before but not answered fully.
    The background:
    i need to make a video that is
    (Video)
    File format: MP4 H.264
    Aspect Ratio: 16 x 9 (1920 x 1080)
    NTSC HD 60i (interlaced)
    Square Pixel
    (Audio)
    48kHz
    24 bit stereo
    When exporting i selected H.264 Blue Ray and set the video accordingly (set the resolution to 1920 x 1080 @ 29.97, upper, square pixle) the problem I’m having is setting up the audio to be 24 bit. From my understanding AC3 only supports 16 bit but what about Dolby Digital can i get 24 bit audio if i use it and what setting do i change to get 24 bit audio at 48 kHz?

    Do you HAVE sound in your comp?  You'd be surprosed by the number of embarassed "no" replies.
    Did you use the AE Render Queue?  You have to specify that you actually want to inclue an audio track in the th Output Module; it isn't automatic.  Most people don't even bother with audio when rendering from AE.
    But here's the big thing: don't use AE to render H.264 files in the first place.  AE stinks at it.  Instead, use Adobe Media Endoder.  You Can open an AE project in AME, then make an H.264 of any comp in the project.

  • Blu-ray project / change of frame rate

    I am shooting 1080/24p format ( I live in Finland/Europe ). I have created blu-ray disk from my project
    with original settings ( FC/share ). Everything is working more than fine.
    I sent this disk to my American friend...the menu opened and BD player started, but no picture. This was actually a test and it failed. I know issue of different television setting USA/EUROPE...but I had to try.
    My question: Is it possible to change frame rate 25p to 24p or 50i to 60i ?

    can anyone recommend me some, so I can avoid running a bunch of tests please.
    Winston,
    You'll probably be happiest using either the JES Deinterlacer or MPEG Streamclip with the "blend" option activated. (Unless you've chucked them for some reason, I assume you still have both on hand.)
    Take care,
    Jon

  • Extra GB in Blu-Ray project?

    I have Encore CS5, and am trying to create a Blu-Ray disc. I used Sorenson Squeeze to produce a 22GB mpeg, but once I import it into Encore (non-transcoding), it says my project is oversized at 27GB. My menus, assets, and audio track add up to less than 1GB. So where are the extra GB coming from? Thanks in advance.

    New response to your first post. I'd like to hear from anyone else who can a) provide more accurate numbers and/or b) give us an update on this problem in CS5.5 and generally.
    Encore appears to estimate too high. I do not know if this was corrected/improved in CS5.5 (Encore 5.1). Also, I believe Encore is reporting GB based on 1,000 bytes rather than 1,024. (Or is it the opposite?)
    My tests yesterday suggested that Encore is adding about 15% to the Windows Explorer reported "size on disk" using bytes rather than the summary "GB." So your 22GB file is 24,159,191,040 bytes. If you have no motion menus, the additional overhead on disk may be minimal, but it will not be nothing. Encore's report of 27GB may be the more commonly reported
    The more important problem is that a "25GB" bluray disk only holds 25,025,314,816 bytes, which is more like 23.3GB.
    You also will find that there are small differences between BD-R and BD-RE. A BD-RE in imgburn is reporting 22.56GB (24,220,008,448 bytes). (When building images, you will see an option in Encore for the type of image BD-R or BD-RE.)
    So I believe that a 22GB mpeg, Bluray ready so no encoding, with some additional overhead and menus, may not fit on a "25GB" disk.

  • Is it possible to burn a SD DVD correctly from an Encore CS6 Blu-ray project and content?

    Hi all,
    I shot and edited AVCHD 1080i30 (60i) square pixel video from a Sony NXCAM HXR-NX5U camcorder in Premiere CS6.  I then exported the 1920x1080 edited mpeg2 blu-ray m2v file for import into Encore Cs6.  Burning a blu-ray disc in Encore CS6 from this mpeg2 bluray m2v file is no problem and look great even with the default settings.
    However, I also want to burn a standard DVD using the same HD Encore CS6 project without having to go back to Premiere CS6 and output a 710x480 mpeg-dvd file.  I thought i could simply select the dvd format under the build tab in Encore thinking Encore would handle all the necessary conversions to burn a 720x480 DVD but the menus look jaggy and the video does not play smoothly.
    Is it possible to burn a standard DVD correctly from an Encore CS6 HD project and content, or is it better to have Premiere CS6 output a 720x480 mpeg-dvd file and create a new standard 720x480 dvd Encore project instead?
    Acording to Encore Help, it says "You can build the same project to DVD and Blu‑ray formats no matter which format you select in the New Project or Project Settings dialog box. Encore makes the appropriate adjustments to transcode the elements to the correct format.", but i'm not convinced Encore is doing things correctly.
    Thanks.

    Jim,
    I tried a variation on your suggestion.
    I exported a new m2v file using the mpeg-dvd from Premiere CS6 as you suggested with "Use Maximum Render Quality" checked to get better scaling from HD to SD. I imported it into my Blu-ray EncoreCS6 project by using the "Replace Asset" option and changed the "Project Settings" authoring Mode to "DVD" leaving the HD menu's "Aspect Ratio" at 16:9.  I then built the disc using the "Build" tab DVD format and output settings.
    It worked!
    The jaggies are gone (except for some motion jaggies) and the DVD plays well.
    I suppose I could have done something similar within Encore but I'll test that some other time.

  • Transacoding Blue Ray project in Encore CS4 gives error!

    I am transcading a high def (AVCHD) project fo a Blue Ray image on my hard disk.
    The transcaoding runs for about 6 hours and when done it gives me the following error:
    Blue-ray Error:"device not ready", Code:"3", Note: "File can not open.(G:\MyDojo\cruise to alaska-2010\AuthorScriptHDMVSessions\-sessionFile_Asf-session_1_video.m2v.ves) -
    The path is a valid path and the file exists.
    Every time I try to rebuild, not having exited Encore, results in same error within seconds. Exiting Encore and re-building, starts the whole loooong process over.   
    Any ideas? Please help.
    NOTE: I used this method once before and it worked just fine.
    Running CS4 on a Vista Ultimate w/8GB Ram, plenty of disk, DELL XPS720.

    Some reading, and fixes if you have not updated
    Encore CS4 Roxio component problem http://forums.adobe.com/thread/400484?tstart=0
    More on Encore and Roxio http://forums.adobe.com/thread/528582?tstart=0 or direct to
    http://kb.roxio.com/search.aspx?URL=/content/kb/General%20Information/000070GN&PARAMS
    Long File Names Cause Crashing http://forums.adobe.com/thread/588273
    And #4 Here http://forums.adobe.com/thread/666558?tstart=0
    And This Message Thread http://forums.adobe.com/thread/665641?tstart=0
    Encore Tutorial http://www.precomposed.com/blog/2009/05/encore-tutorial/
    Things and Software to AVOID when authoring/burning a DVD
    Read all links/sub-links to create a "best" burned disc
    Start --> http://forums.adobe.com/thread/608660?tstart=0
    #2 has WHY Explained http://forums.adobe.com/thread/607390
    Plus a Microsoft note http://support.microsoft.com/kb/314060
    And another note http://support.microsoft.com/kb/982116
    http://forums.adobe.com/community/encore/encore_faq

  • 96 hours to build a blue-ray project???

    Hi again,
    just taken a look of my project running and I felt my heart in my throat!!!!!!
    96 hours to build a project!!!!!!!!!!!!!!
    It is a BR project, edited in two languages and it is 2 hours and 10 minutes long.
    Everything (filmed menus and main film are mpg2 Blue-Ray (high quality standard Adobe settings)
    No trascoding.
    Is it ok for blue-rays ( it's the first time I work with BR)
    Thanks in advance

    Sorry sorry sorry.
    False alarm.
    It's just an Encore wrong timing display.
    It has taken 20 minutes.
    Ciao

Maybe you are looking for

  • Backing up and restoring device data

    I have a question about the following: I made a back up of my blackberry curve to my computer, but now ALL my sms messages are gone! And when I tried to restore them, it didn't work! And I can't open the XML file of my back up, so now all my sms mess

  • Doubt in Smartforms - how to display multiple  sale document no. in s

    Hi guru's,         I need sample code like print program and Smartform download  for multiple 'Vbeln' sale order document no. Please help me Rewards for helpful sample code. Regards, Rajiv Christopher.

  • AddressBook.data is missing

    hello i have lost all my address book contacts when synchronizing imac-iphone-ipad. i've been searching for help for several hours and found that solution could be: replacing AddressBook.data with AddressBook.data.previous! the problem is they are bo

  • SSD upgrade on Macbook pro 13

    Im upgrading my drive in my macbook and im wondering if the patriot siqnature series 128gb would be a good choice. I have read one review that said a "macbook"(didnt say which series)didnt read the drive, is this ture? thanks

  • How to restore to firfox 3.6 without loosing settings

    Hi i have being using Firefox 3.6 and like the layout now with v4 everything has changed. like favorites is now on the right reload is on the right 1.can i set v4 to work like v3.6? 2. or can i reinstall v3.6 without loosing settings,passwords etc.