Blu Ray video disk will only display on W500 screen, not on attached screens

My W500 (Win7-64bit) plays blu-ray disks perfectly on the W500's screen.   But it will not play on an attached 1600 x 1200 DVI monitor, either attached through a mini-dock, or via the DisplayPort and a DVI convertor adapter. In both those cases, WinDVD 2010 (which I purchased to replace WinDVD 8 provided) says "Your display environment does not support protected content playback"  WinDVD 8 gives exactly the same message. The same Blu Ray drive plays DVD's perfectly to the 1600x1200 DVI screen. Anyone understand what the problem might be ?  

Hello,
I saw your reply in this five year old thread asking about HDCP.
HDCP is short for High Definition Copy Protection.  It means the devices at both ends (video card, monitor) must support encrypting the signal between them in order to prevent digital copying/piracy.
Regards,
Aryeh Goretsky
 

Similar Messages

  • When i want to print an email, it will only print the address and not the attachment why

    When I receive an email that I want to print, the printer will only print the address and not the attachment with the message or a picture.   Why?
    HP Photosmart C6180 All-in-One

    hi there,
    could you provide the community with a little more information to help narrow troubleshooting? What operating system are we using and where are we printing from?
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • My itouch will only display a white screen, is this fixable? help!

    My i touch was working absoluty normally, then one day it would only display a white screen. I can still see it on my computer however it is showing that the memory has been wiped. I tried to restore it to its original settings, but it still displays the same white screen. I have drained the battery fully, and tried holding the buttons down for 10 seconds. Nothing is working and im now confused. Can anyone advise me please? thank you.

    When restoring an iPod to factory defaults/new iPOd does not solve a proble it is most likely due to a hardware problem.  I would make an appointment a the Genius Bar of an Apple store.

  • My ihone only displays a white screen and I want to fix it myself.

    my iphone will only display a white screen can I fix it and how can I?

    At this point, you probably be better off saving up for and purchasing a new one. Apple will not help you since you opened the iPod up.  A third party repair company may be able to help but the cost will likely be near the cost of buying a new Nano.
    B-rock

  • HT204291 Using Azul media player app on my ipad  Apple tv will only display sound but not video from movies.  Any ideas on a fix.  I set mirroring to on but it still does not display video.  It will display photos and video recorded from my iphone.

    Using Azul media player app on my ipad  Apple tv will only display sound but not video from movies.  Any ideas on a fix.  I set mirroring to on but it still does not display video.  It will display photos and video recorded from my iphone.

    Here are the steps for AirPlay:
    Before starting Azul from your (running iOS 5.x/6.x) home screen where have have all your apps we need to turn on mirroring
    On your iPhone 4S/5 or iPad 2 or 3, double-click the Home  Button to view your recently-used apps.
    Swipe all the way to the right to until you see the  icon.
    Note: If the icon does not appear, go to the "If AirPlay Mirroring is not visible or available on your mobile iOS device" section.
    Tap the  icon to see the list of available AirPlay devices.
    Enable AirPlay Mirroring in this menu by tapping on an available Apple TV, then sliding the Mirroring slider to ON.
    Now you should be seeing your iPad/iPhone on your TV.
    Start up Azul now and using the settings icon on the top right corner go to the option that say "TV out" ON.
    When you do that you will see an Orange screen
    Now click "Done" and play the video you want to watch and it will AirPlay

  • Encore a good choice for authoring Blu-ray videos with complex menus?

    I currently use FCP X for editing videos of live band performances. I have been dissapointed in Toast Titanium for aurthoring the resulting Blu-ray videos because of the limited menu options.......I will often have 30 separate videos on a Blu-ray disk (one per song).
    I am considering buying Premiere Pro CS6 to obtain Encore because I have been told it provides more complex menu options.
    (1) Are you happy with Encore for aurthoring Blu-ray videos?
    (2) Would I also need to buy After Effects?
    I ask the 2nd question because I have watched an excellent "Authoring with Adobe Encore" tutorial here:
    http://www.precomposed.com/tutorials/products/pro_motion_menu_kits/Encore_Authoring/
    These folks offer some nice looking Menu Kits
    http://www.precomposed.com/products/pro_motion_menu_kits/
    but they use After Effects as well as Encore.
    Thanks for the help.

    For your #1 question, you might want to go to that forum http://forums.adobe.com/community/encore

  • I'm in the process of creating a WiFi network from my IMac to my LG HDTV.  I am incorporating a LG WiFi capable Blu-ray player and will purchase an Apple Express or Apple Extreme router. I need some advise on using this aquipment.

    I need help in determining the best way to create a WiFi network from my IMAC to a WiFi capable LG Blu-Ray player that will connect to my LG HDTV.  Since I will only need one network I need to know which is the best Apple Airport router to use (Express or Extreme).  What is the correct way to connect these units?  It seem self explanitory,but I'm checking my thinking.  My HDTV is about 20' from where the airport router will be installed with a wall between them.  Has anyone created this network?  Is this the best way to create a WiFi network?

    I need help in determining the best way to create a WiFi network from my IMAC to a WiFi capable LG Blu-Ray player that will connect to my LG HDTV.  Since I will only need one network I need to know which is the best Apple Airport router to use (Express or Extreme).  What is the correct way to connect these units?  It seem self explanitory,but I'm checking my thinking.  My HDTV is about 20' from where the airport router will be installed with a wall between them.  Has anyone created this network?  Is this the best way to create a WiFi network?

  • HT1476 My Iphone 4 won't charge and will only display an apple symbol that flashes on and off. The symbol has a split in the apple. Can anyone help. Thanks

    My Iphone won't charge and will only display an apple symbol that flashes on and off. The apple seems to have a split through it which I havent seen before. Theres no battery icon. I've plugged it into my coomputer and that hasnt worked. Tried to hold the on/off and power button together. Nothing seems to be working. Has anyone got any ideas. thanks

    Hi there Cristi862,
    I would recommend taking a look at the troubleshooting steps found in the article below.
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/ts3281
    -Griff W.

  • I use classical Hebrew for my work, and Pages will only display English characters even with a Hebrew font selected. If I cut and paste Hebrew characters from another document, as long as the font is supported, it will appear in Pages.  If I type it won't

    I use classical Hebrew for my work, and Pages will only display English characters even with a Hebrew font selected. If I cut and paste Hebrew characters from another document, as long as the font is supported, it will appear in Pages.  If I type it won't continue in Hebrew.  I have tried downloading several fonts, including those from professional societies, but the only way to get Hebrew in my document is to cut and paste.  Does anyone know how to fix this?  I use an older MacBook running OS 10.9.1.  I used to do my Hebrew work in Word, but it is no longer supported by Mac OS.

    Just clarifying:
    Pages '09 has bad support for Hebrew, Arabic etc but will accept pasted text.
    Pages 5 has much better support but with bugs.
    If you have columns they are in the wrong order ie Text starts in the left column and ends in the right column.
    If you type English into Hebrew text it tends to fall in the wrong position eg instead of to the left of Hebrew punctuation it goes to the right.
    As Tom recommends the only real solution on the Mac is Mellel.
    Peter
    btw Tell Apple, they are amazingly slow to fix this running sore which has been broken since RtoL was supposedly introduced in OSX 10.2.3 over a decade ago.
    Peter

  • Pages will only display the first page of text.

    Pages will only display the first page of text. New pages are created as usual but blank and pages are visible through quick views. Reinstalling does not fix the problem, I don't know if it is an issue with settings. Pages v 4.1 on OS 10.7.4. Running on new macbook with retina.
    This is apparently a retina issue. Update hopefully soon

    You have not said but it sounds like you are using a Macbook pro with retina display.
    Pages is exhibiting all sorts of problems with the Retina display which Apple is supposedly working on.
    Peter

  • "Reader" will only display a PDF for one second, then suts down the PDF.

    I recently had an automatic update to "Reader" and now "Reader" will only display a PDF for about one second, then shuts down the PDF.  This happens to all PDFs no matter what the scource.  I am running Windows 7.  What do I need to do to correct the situation.  (Yes -- I deleted "Reader" from my computer, the re-installed it.  Didn't help.)

    Go to C/Programs/Adobe/Reader 11/Reader.
    Look for a file named eula.exe (or just eula).
    Double click it.
    Accept the license agreement.
    Reader should work fine from there.

  • Adobe Reader XI will only display/save docs from Internet in Landscape

    The documents I am viewing from the Internet are portrait documents and the Reader will only display them as landscape. I cannot find anything that will allow me to change the option so that it will display the document in portrait.
    What do I do? Or, when will this be fixed?

    Is it this form: http://www.douglas.co.us/assessor/documents/senior-exemption-short-form.pdf ?
    It's portrait format.  How are you viewing this document?

  • Library shows original but will only display clip if double-click to open

    I did some editing in PSE, lifting a couple of clips from one of the photos in iPhoto.  When I look at the photo in the iPhoto library, it looks fine.  However, if I double-click to open it, it will only display one of the lifts - not the original.  Where/how can I find the original photo?  It seems to me that if it is gone, it would not display in the library.  Thank you.

    Can you explain what you mean by "clip"?
    Every version of iphoto has a Revert to Originals command.
    How have you set up editing in Elements?
    Regards
    TD

  • I used the digital download from my purchased Blu-Rays and they will not sync with either my iPad or iPhone 4, saying they did not transfer because I am not authorized on this computer. I tried de-authorizing and re-authorized my MacBook Pro already

    I used the digital download from my purchased Blu-Rays and they will not sync with either my iPad or iPhone 4, saying they did not transfer because I am not authorized on this computer. I tried de-authorizing and re-authorized my MacBook Pro alreadydigial

    I just got a Touch 32GB yesterday and ran into the same problem. I have two PCs in the house that I can sync my iPods on, but I normally use one that DOESN'T have an internet connection, so that the one that does is free for others to use ... a great argument and tension solution, btw.
    Anyway, I hooked up the older "iTunes" PC to the net for a first-time sync with the Touch, and ran into this problem. First it kept detecting the Touch as an unidentified iPhone, then I couldn't sync my classic either. Then I found a post here about how when multiple USB ports running off same USB controller seem to screw with the Touch/iPhone syncing.
    So I disconnected all but 2 of my USB 2.0 slots (the Touch & the Portable HD with my iTunes Library) and now it's working perfectly. I don't know if this will solve your problem, but it might be worth a try.

  • Blu Ray Video

    Can someone tell me if there is a difference between a BluRay player and a 3D BluRay player.
    Solved!
    Go to Solution.

    To watch a standard Blu-Ray any player will work but as Jimmie said you MUST have a 3D Blu-Ray Player to play movies in 3D.

Maybe you are looking for

  • Ipod nano sync

    i just bought an iPod nano 7th gen. while syncing with mu iTunes music it is showing 5GB free space but not taking in songs though there is 32 GB songs stored in my iTunes library of MAC.

  • How to create a dvd from iPhoto11

    I've created a book using iPhoto 11 (v9.5) and want to create of the book using idvd 7.1.2.  The share menu in iphoto no longer has the option to export to idvd.  Any assistance would be appreciated. I'm using Mavericks Thanks

  • IMovie to be viewed from NAS

    Hi, I have a large iMovie library recorded with my Sony cam in HD. All stored on one Mac Computer. In our family we have 4 computer. Two running on Mac (with the latest OS and the latest iMovie family pack) and two running on Windows 7. I want to be

  • How to pass command-line options to app using the "open" command?

    I am using jedit, and since I'm doing a lot of stuff in a shell, I'd really like to launch it from the command line as though I'd opened from finder, so I wrote a script that contains this: open -a /Applications/Jedit.app "$@" & This works well for e

  • I cannot access NAS with Mac OS Yosemite

    I 've red other guy's problems in threads like that https://forums.lenovo.com/t5/Iomega-Network-Storage/Cannot-connect-from-OSX-Mavericks/td-p/1298155/p... but i haven't found any working solution. I just cannot access my NAS from Mac computer with O