Blue Background of large text or images until page fully loads

This problem occurs in Internet Explorer when viewing iWeb created sites. The blue or yellow highlights go away when the full page is loaded. This does not occur in Safari. I just want to make sure the other 90% gets to see my site as intended.

This is probably caused by the fact that your images are large and the text may also be converted to an image. Turn on "Show text imaging indicator" in iWeb preferences to see if this is the case.
Files take a lot longer to download in IE as it is so inefficient.
To improve this situation you can optimize your images before loading into iWeb......
http://roddymckay.com/PlanetRoddyPhotoSatellite/OptimizeImageFile.html
... and optimize all your website files...
http://www.iwebformusicians.com/SearchEngines/Optimize.html

Similar Messages

Blue Background for Title Text

Seems like it would be simple, but I can't figure out how to change the basic black slug the text goes on for a title to a blue background instead of the black background.....Thanks in advance.

You can place a Color Matte, beneath your text. EFFECTS > VIDEO GENERATORS > MATTES > COLOR
You can change the color of the matte by selecting the Control Tab in the viewer.
There are many other options depending on what you are using to create your text.
rh

Blue screen with large text lower left

I have a Z935 ultrabook purchased last year with Win 8 OS. I was doing something, I can't remember what, when I got the blue screen. In the lower left there was the date and time in large type (3/8 -1/2 inch). Below this was the 5-bar symbol of a wireless connection indicator.
In the lower right there was the symbol which, normally, clicked on, would bring up the dialogue Restart, Shut Down, Log Off, or Lock. Nothing happened, here, however.
All I could do was to shut down using the physical on/off button. I turned it back on - same thing - same blue screen. I did this several times. Nothing else worked, no key did anything, no Ctrl-Alt-Del.
I finally read about using the F12 key on turning back on, and I received a page with the option to Recover, or something like that, and oher options, i chose Recover, and a screen came up with several options.The first option was Continue normally, and there were options to Restore, Reset, or something like that. I just chose Continue Normally, and everything came up as it was supposed to, and all is OK now.
Does anyone know what might have caused this screen, or has anyone received one like it - with the time, date, wireless indicator, etc.?
Thanks very much.
Solved!
Go to Solution.

Many, many reasons for BSOD's, Bob. Hopefully, there won't be a next time. However, if a freeze of any kind, BSOD or otherwise, happens again, reset the system by holding DOWN the power button for 10 seconds or until all the indicator lights go out, fan stops and you're sure the computer is off. Turn back on and everything should be back to normal.
C.B.
Toshiba Sat. C75D-B7260 Win 8.1 64 Bit--Toshiba Sat. L775D-S7132 Win 7 HP SP1 64 Bit and Win 10 PRO Technical Preview--Toshiba Sat. L305-S5921 Win Vista SP2 32 Bit

Show an image until a progam loads?

Hi all,
I'd like to have an image show up when my program starts, probably just a little box that says, "My Program" and has a loading bar on the bottom. Is there any way to do that without it being a JFrame (think of how Eclipse first starts, that's what I'm thinking of). Can anyone help me out?
Thanks,
Jezzica85

Is that what it's called? I've never heard that
term.Click on the link!

How to display large text document (2-3 pages) without using the webpage widget?

Hello all,
We are designing this online course and our project leader asked us to try to include the course materials/contents within the Captivate file as much contents as we can. However, we have several "big" text-based files to display, such as syllabus, standards, project templates, etc.
I know that the webpage widget created by Jim Leichliter can "embed" web pages and PDF files into Captivate. However, as mentioned before, our project leader wants everything to reside within Captivate. That means that I can't use the web page widget to "quoate" an external PDF file.
I also tried the extended Text Entry Area widget, but couldn't get it work. I would really appreciate it if someone could help me with this.
Thank you very much.

Would it be possible to create a table that had one row for every week? If so you could do something like this:
DESC ALL_WEEKS
NAME Null? Type
WEEKENDING DATE
SELECT A.CUST,
B.WEEKENDING,
SUBSTR(MAX(TO_CHAR(A.WEEKENDING,'YYYYMMDD')||A.STATUS),9,1)
FROM YOUR_TABLE A,
ALL_WEEKS B
WHERE B.WEEKENDING <= A.WEEKENDING
GROUP BY A.CUST,
B.WEEKENDING;

Certain web pages are stuck in large text in Safari

I've been having this issue since I got my Air last year. Certain web pages (MSNBC and Google to name a few) are stuck in really large text. Other web pages are fine. I've tried resetting th browser, deleting cookies, etc. But I cannot seem to fix this issue. Anyone have any ideas?
Thanks

Sorry. I poked around furhter and finally found the issue. The font sizes were too big! Not sure when I could have done that, but there you go. This question can be closed down.

Text message has blue background?

Hello. Normally the text messages I send have a green background and the ones I receive have a beige background. Today, however, without warning, the ones I send have a blue background. What would have caused that?
Thanks.

Thanks for the info. So, if I understand this carefully, whenever I send a message from my iPhone 5 which has IOS6 to someone else who has an iPhone 5 with IOS6, the message travels via Apple's network rather than via the phone network. If I send to someone who does not use IOS6 it travels as an SMS over the phone network. Is that the gist of it? Thanks.

I don't have a phone plan, so I cannot text without wifi. I have been using iMessage to text my friends, until it stopped working. I can text my sisters email, but not my boyfriends iPhone. The send button will not turn blue. Help? Please?

I don't have a phone plan, so I cannot text without wifi. I have been using iMessage to text my friends, until it stopped working. I can text my sisters email, but not my boyfriends iPhone. The send button will not turn blue. Help? Please?

There is a problem with iMessage with what Apple says is a small number of iPhones and they are working on a fix. In the meantime try this:
1. Settings > Messages > iMessage = Off
2. Settings > FaceTime > FaceTime = Off
3. Settings > General > Reset > Reset Network Settings
4. Wait for the iPhone to Reboot
5. Settings > FaceTime > FaceTime = On
6. Settings > Messages > iMessage = On
You may have to repeat the steps a couple of times.
- with thanks to @deggie

How can I erase the residual background text and images from the backside of a scanned page?

How can I erase the residual background text and images from the backside of a scanned page?
Also, I wanted to know what each subscriptions included as far as my question above is concerned?
I am trying to edit a scanned page (pdf file) by changing some words and erasing the background from the page that is showing through it since the paper is so thin and want to know which subscription to buy in order to complete these tasks?

This cannot be done in Reader. I think you will need software like Photoshop. You may be able to get buy with Photoshop Elements, but I haven't used recent versions of that software. Using either software this will not be an automated task.

Blue background behind text

Often when we print from a third party application the PDF comes out with a
dark blue background that is very hard to read.
Any fix for this?

I am the vendor and don't have a clue how to stop this or what could cause it; I am looking for suggestions please. Or someone to contact off line.

Arbitrary waveform generation from large text file

Hello,
I'm trying to use a PXI 6733 card hooked up to a BNC 2110 in a PXI 1031-DC chassis to output arbitrary waveforms at a sample rate of 100kS/s. The types of waveforms I want to generate are generally going to be sine waves of frequencies less than 10 kHz, but they need to be very high quality signals, hence the high sample rate. Eventually, we would like to go up to as high as 200 kS/s, but for right now we just want to get it to work at the lower rate.
Someone in the department has already created for me large text files > 1GB with (9) columns of numbers representing the output voltages for the channels(there will be 6 channels outputting sine waves, 3 other channels with a periodic DC voltage. The reason for the large file is that we want a continuous signal for around 30 minutes to allow for equipment testing and configuration while the signals are being generated.
I'm supposed to use this file to generate the output voltages on the 6733 card, but I keep getting numerous errors and I've been unable to get something that works. The code, as written, currently generates an error code 200290 immediately after the buffered data is output from the card. Nothing ever seems to get enqued or dequed, and although I've read the Labview help on buffers, I'm still very confused about their operation so I'm not even sure if the buffer is working properly. I was hoping some of you could look at my code, and give me some suggestions(or sample code too!) for the best way to achieve this goal.
Thanks a lot,
Chris(new Labview user)

Chris:
For context, I've pasted in the "explain error" output from LabVIEW to refer to while we work on this. More after the code...
Error -200290 occurred at an unidentified location
Possible reason(s):
The generation has stopped to prevent the regeneration of old samples. Your application was unable to write samples to the background buffer fast enough to prevent old samples from being regenerated.
To avoid this error, you can do any of the following:
1. Increase the size of the background buffer by configuring the buffer.
2. Increase the number of samples you write each time you invoke a write operation.
3. Write samples more often.
4. Reduce the sample rate.
5. Change the data transfer mechanism from interrupts to DMA if your device supports DMA.
6. Reduce the number of applications your computer is executing concurrently.
In addition, if you do not need to write every sample that is generated, you can configure the regeneration mode to allow regeneration, and then use the Position and Offset attributes to write the desired samples.
By default, the analog output on the device does what is called regeneration. Basically, if we're outputting a repeating waveform, we can simply fill the buffer once and the DAQ device will reuse the samples, reducing load on the system. What appears to be happening is that the VI can't read samples out from the file fast enough to keep up with the DAQ card. The DAQ card is set to NOT allow regeneration, so once it empties the buffer, it stops the task since there aren't any new samples available yet.
If we go through the options, we have a few things we can try:
1. Increase background buffer size.
I don't think this is the best option. Our issue is with filling the buffer, and this requires more advanced configuration.
2. Increase the number of samples written.
This may be a better option. If we increase how many samples we commit to the buffer, we can increase the minimum time between writes in the consumer loop.
3. Write samples more often.
This probably isn't as feasible. If anything, you should probably have a short "Wait" function in the consumer loop where the DAQmx write is occurring, just to regulate loop timing and give the CPU some breathing space.
4. Reduce the sample rate.
Definitely not a feasible option for your application, so we'll just skip that one.
5. Use DMA instead of interrupts.
I'm 99.99999999% sure you're already using DMA, so we'll skip this one also.
6. Reduce the number of concurrent apps on the PC.
This is to make sure that the CPU time required to maintain good loop rates isn't being taken by, say, an antivirus scanner or something. Generally, if you don't have anything major running other than LabVIEW, you should be fine.
I think our best bet is to increase the "Samples to Write" quantity (to increase the minimum loop period), and possibly to delay the DAQmx Start Task and consumer loop until the producer loop has had a chance to build the queue up a little. That should reduce the chance that the DAQmx task will empty the system buffer and ensure that we can prime the queue with a large quantity of samples. The consumer loop will wait for elements to become available in the queue, so I have a feeling that the file read may be what is slowing the program down. Once the queue empties, we'll see the DAQmx error surface again. The only real solution is to load the file to memory farther ahead of time.
Hope that helps!
Caleb Harris
National Instruments | Mechanical Engineer | http://www.ni.com/support

How do I leave editable text and images in a PDF?

I recently bought a flyer template and it came as an editable PDF. Here is one of the templates http://www.wendygarratt.com/images/flyer.pdf
Every field, both text and graphic object, is fully editable in the free Adobe reader. I have Acrobat X and have tried all the methods of producing something like this but nothing has worked. I wish to produce not just one page template PDFs that can be edited like the one above, but I also have a 20+ page magazine, which currently is distributed in PDF form and I wanted certain image and text fields within the magazine to be customisable too.
I design the magazine using InDesign and the exported pages are composed of 1 large background image with text fields laid over the top. I have tried exporting it as an interactive PDF, ticking the layers option for Acrobat, but when I try to create an editable form (Tools>Forms>Create>Open file) it does not recognise any of the text fields at all.
Can someone please help me before I slam my head repeatedly in a door? I have been searching for a solution for so long and I'm getting rather frustrated.
Thank you in advance
Wendy-G

Thanks for the replies I've had so far, but I really need some detailed help to sort this.
I want to be able to create a PDF that has editable text and editable graphics over a background image, that can be edited in the free Adobe Reader, as per this item - http://www.wendygarratt.com/images/flyer.pdf
I know this was designed in LiveCycle and I have LiveCycle and Adobe Acrobat Pro X, but LiveCycle is new to me. I am a quick learner (I use Photoshop, InDesign, etc) and need help in getting started.
I am willing to work with someone to help get this sorted but it is urgent that I get to grips with this.
Thanks so much for helping
Wendy-G

The option to add a hyperlink to a text or image is greyed out and not functional. How do I fix this?

The option to add a hyperlink to text or an image in pages is greyed out. How do I fix this?

Peter is correct. However, one can clever up two overlayed, grouped Text Box and simulate a hyperlinked image that can be placed in the document body with text flowing around the image. Moving the image requires temporarily turning off the hyperlink in the Link inspector. Example was Pages ’09 v4.3 on OS X 10.8.4.
Steps:
From the Pages Toolbar, select Text Box twice. The Text Box will be slightly offset. Select and drag the offset one to just above the centered one.
Click inside the centered Text Box and back out the placeholder text. Now select this Text Box and choose the graphic inspector.
Choose Fill > Image Fill. Choose your image, and then Scale to Fit the entire Text Box.
From the Pages arrange menu, choose Make Background Objects Selectable, and Send Object to Background.
In the Wrap inspector, select Object Causes Wrap, and your choice there. My example was door #2.
Click inside your text-only Text Box. Change the placeholder text to three instances of the capital letter ‘O.’
Launch the Font panel (command+T).
Manually change the font size to 92 points. This just fits a default Text Box size without wrapping. I used Times New Roman Regular.
Select the text, and with the Link inspector, enable your choice of hyperlink, and also disable it (for now) with the “Make all hyperlinks inactive.”
With the text still selected, choose Font color from the Font panel. At the bottom of the Color tool, set the Opacity of your text to zero.
Drag the transparent text-only Text Box exactly over the top of your image Text Box. Use the blue guides.
From the Pages edit menu, Select All. From the Pages Arrange menu, choose Group.
Drag the Text Box group where you want it in your document body. Text will flow around it if you used my setting in the Wrap inspector.
Lastly, with the Text Box group selected, disable “Make all Hyperlinks inactive” in the Link Inspector. You now effectively have a text map overlaying your image and the mouse pointer changes to a hand. The link is now active. Exporting your Pages document to PDF preserves the hyperlinked image effect in both Preview and Acrobat Reader.

TS3274 My Ipad display screen is coming up with blue background and pink/purple lines all across the screen. It's also blurry and difficult to see icons on home screen and when apps are opened up. Has anyone had a similar problem?

The display screen on my Ipad is coming up all blurred with blue background mixed with pink and purple lines. It's difficult to see icons but apps are still accessible. Colors are off and images are very unclear on apps and home screen.
Has anyone had this problem or any advice on troubleshooting?
Thanks.

First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. See if that fixes your problem.
But it could also be a hardware failure. Make an appointment at an Apple Store to have your device examined by a technician. Or contact Apple Support.

Pausing a sequence of text and images

Ok, I have 6 tabs down the side of the main screen where
users can hover over to select which tab to view. All they do is
hover to select the tab - no clicking. The sequence changes from
tab to tab sequentially (if a tab is selected then the sequence
just carries on from the tab that was selected. So it starts on tab
1 if the user hover over tab 4 then after that tab information is
displayed for 5 seconds then tab 5 will play then 6...) with each
tab having its individual text and images.
My problem is that I want the whatever tab the user is
hovering over to stay. So I will only want the sequence to carry on
running when the user has not got the cursor on a tab.
I am at the stage at the moment where I can select any of the
tabs (they are buttons) by hovering over them by using the goto
text, then the sequence continues. I need the sequence to stay
until the cursor is off the tab. One other thing, each tab is set
to display for 5 seconds before it changes again.
Someone please help. I feel as though this may be quite an
easy problem to solve?!?
Thanks
Dan

Priscilla,
I routinely combine 10 lines of 36 pt bible or lecture text to a suitable background using Boris Title 3D.
Many times the text is too long to fit the screen using Boris, so I devide it into 2 or more parts with no transition between sections.
In my case, the text is on the screen as the speaker quotes them.
David

Blue Background of large text or images until page fully loads

Similar Messages

Maybe you are looking for