Blue background when I type and typing not shown on google

Entry boxes turn blue when I type and when searching on google I can't see what I am typing at all. The subject line on Yahoo email turns blue but I can see what I am typing there.

Uninstalled Constant Guard. Was afraid I'd lose Norton Security Suite, too, but that remained. Blue box in Google problem went away. Can't say it's forever, but for now it's better.

Similar Messages

  • VF11 wrongly created with RV Doc type and with not clear status.

    Hi All
    Issue: There are 2 billing documents which were created(VF01) in March are canceled (VF11) in May. Cancel document is saved with a message (No automatic clearing of billing document XXXXXXXXX) and message diagnosis saying that u201CThe Automatic clearing of billing document and reversal is not possible. This may be, for example, because the line item update is deactivatedu201D
      In the SD document flow cancel billing document is created and it's posted to accounting with Document type RV(which is not configured in the billing  types) and it is in not clear status.
    2 Sales order types are ZNRC(No Rebate u2013 Credit)    second is ZCR (CM Req With Refer).
    Order Type  : ZNRC , Billing type :ZG2, Cancel billing type :Z5, Accounting document in billing type for ZG2: is DG and accounting document in cancel billing type Z5 is :(_) blank.
    Order type:  ZCR Billing type :G2, Cancel billing type :S2, Accounting document in billing type for G2: is DG and accounting document in cancel billing type S2 is :(_) blank.                                                
          FI document type Not maintained in the cancel billing type configuration because this should be determine by reversal document type DA which is maintained in DG document type from FI side. It will be triggered in VF11)
    The above configuration is working with the order created VA01,billing VF01 and cancelling VF11 done in same period. If the order and billing done in old period and canceling(VF11) done in current period than FI document creating with RV document type and with not clear status in the document flow.
    I reviewed similar issues with SAP Note and with below explanation:
              "There are 2 procedures that are possible when Vf11 is posted.
              Old Procedure - An FI "Reversal" document was created that was not connected with the orignal.
              New Procedure - A Real FI reversal was carried out with clearing."
    In this case, our system is following with new procedure except above mentioned orders created in previous period and and canceled in current period.
      My Questions are: How the RV document is getting triggered here? why the cancel document (Reversal FI Doc) is not clearing?
         Appreciate your answers or suggestions.
    Thanks in advance,
    Sunil
    Edited by: Sunil kumar Matta on Jun 9, 2011 3:40 PM

    Thank you Ivano.
      I referred SAP note 1259505 and 339928. But initially we thought of none of the symptoms mentioned in the SAP note are matching with our issue. Then we contacted SAP online support and they suggested checking one SAP note (Mentioned above).
      Our system is following new cancellation procedure, but itu2019s failing only for some few documents.
      Finally we identified several reasons for the issue. One is profitability segment in the billing document and cancelled document is different due to some changes in segment assignments. Another one is consolidation- consolidation document does not exist in the billing document list but it is getting created in Canceled document (VF11).(Consolidation postings are switched off some time back and now itu2019s on)
      After some discussions it is decided to include accounting document type (Reversal) in cancel billing types to avoid default RV document type in canceled billing document accounting document. And non-cleared documents need to be created manually in F-32.
      Thread is closed.
    Sunil

  • Blue background when scrolling, nvidia GTX670, 301.64 drivers

    After upgrading video card to Nvidia GTX670 with 301.64 drivers, all firefox windows show a blue background when scrolling.
    [http://www.flickr.com/photos/78895346@N07/7227064448/ screenshot]
    The problem goes away if hardware acceleration disabled, but stays when all plugins disabled or smooth scrolling enabled/disabled.
    Screen is 1920x1200, Windows 7 64-bit, i7-920 CPU.

    As you've confirmed yet again, the hardware acceleration feature doesn't work equally well with all graphics drivers.
    I don't know whether there is a place to report specific problem combinations; you could try the Help > Submit Feedback feature, and try to copy/paste from the Graphics section from the bottom of Help > Troubleshooting Information

  • WHEN I TYPE IN MY NOTES ON I-PHONE IT DOESNT SHOW UP ON MY I-PAD

    when i type in my notes on my iphone its does not show up on my i pad

    I found out my 64g iPad is the older version and only goes to 5.1 and not 6.1  thank u for response

  • TS1567 My Ipod Classic appears in my computer when connected to my Windows 8 pc but when itunes starts it no longer appears and is not shown in Itunes also. Itunes appears to disconnect it from pc.

    My Ipod Classic appears in My Computer when I connected it to my new Windows 8 pc. When Itunes starts my Ipod is no longer appears in My Computer and is not shown under Devices in Itunes. It appears that Itunes disconnects my Ipod from the pc. My Ipod still sync's up fine with Itunes on my old Windows XP pc.

    See earlier post by tt2
    https://discussions.apple.com/message/7217190#7217190

  • HT4061 good morning! I just did a software update on my phone (finally) last night and now my phone will not come on.  All it keeps showing is the charger pointing up to a blue circle with iTunes inside and will not go any further.  Can ANYone please expl

    Good Morning,
    I just did a software update on my phone (finally) last night and now my phone will not come on.  It keeps showing the charger pointing up to a blue circle with iTunes inside and will not go any further.  Can ANYONE help me please???

    The phone is in restore mode and the picture is telling you what to do. Connect the phone, by cable, to iTunes in the computer you normally use for syncing, and retore the phone.

  • When I type in a name in the Google Search Bar using the Classic Home Page, nothing happens, i.e, type in the word BASEBALL, then hit ENTER, and nothing happens

    When I type in a name in the Google Search Bar using the Classic Home Page, nothing happens. For example, if I type in the name BASEBALL, and then hit ENTER, nothing happens. This just started today.

    I had a "typo." It is supposed to say........
    www.google.com/firefox?client=firefox-acrls=org.mozilla:en-us:official

  • Documents edited with added text and sketch not shown while emailing in iPad 2.

    Documents edited with added text and sketch not shown while emailing in iPad 2.

    Hi Rakmana,
    This is most likely an issue with Apple's iOS Mail program's.
    I think you are opening your modified PDF in Apple built-in PDF Preview. Apple's code does not properly draw the comments, but if you look at the PDF in virtually any other PDF application that isn't just using Apple''s code, or on any desktop computer, you will see the comments you've added.
    Thanks
    -Satyadev

  • MacBook restarts to blue background when the lid closes-only sometimes????

    My Mac has done this periodically since six months after I've bought it. When I close the lid, I hear the restart tone and when I open it back up it's going through a restart process. Most of the time, it starts back up with a blue background (not the normal picture I have as my background) and I'm unable to drag and drop items from an open program to a folder or the desktop (unable to drag a picture from iphoto to the desktop). To remedy the situation, all I have to do is restart the computer normally and it returns to a normal desktop.
    I called Apple and they first ad me do an archive and install, which I did with no results (the problem still occurred at least once a day) and then an erase and install which reduced the frequency of the problem but did not eliminate it. I also sent the computer in to the Apple Depot where the replaced the top case, the power management unit, and the heat sync but did nothing software wise. When I got the computer back, I again did an erase and install and the problem is still occurring a couple times a week.
    Anyone have any idea on what's going on? Should I keep harassing Apple Care? Will it do any good? I'm about to buy 10.5, but will this fix it? Help!

    Bump

  • Mousewheel Scrolling and Typing not smooth anymore scince 10.5.2

    Anybody else is having the Problem that Scrolling wiht a Mousewheel is not smmoth anymore scince the 10.5.2 upgrade? Also when i type the Letters on the screen appeaer a tiny bit later and its not responding smoothly anymore....

    I'm having the exact same problem. Typing is very slow and lags behind as I type along. This along with the clamshell mode not working anymore with my external monitor, and I'm rolling back to 10.5.1 right now. Time to see how a timemachine full restore works...
    This is the first apple update that has had this many problems for me. Maybe we're isolated cases, but if these types of problems are widespread, then somebody over at apple QA should be in hot water right now. This type of thing really kills customer satisfaction and loyalty...

  • My display color shifts to a blue tint when opening photoshop and bridge with Yosemite

    The display on my mac book pro color shifts to a blue tint when opening Photoshop CS6.  Any suggestions on how to maintain the current color profile?  My photography work is dependent on proper display calibration.  Thank you

    First open the Universal Access preference pane and in the 'seeing' tab, make sure that the slider for 'enhance contrast' is all the way to the left. Next, open the Displays preference panel and click on the 'color' tab. The click the 'calibrate' button. This will take you through a color/brightness/contrast set up procedure that may eliminate the problem.
    There are two options in the calibration process, standard, which is the default option and has fewer adjustment screens, and expert, which is selected by checking the box for it on the first calibration screen and offers more adjustments. You can't do any harm with either since any settings you create can be discarded, or profile(s) you save can be deleted or ignored if necessary.
    This won't necessarily resolve the problem, but if not, then it would indicate that there's an issue with the hardware - possibly just the connector on the back of the system, which needs to be fastened really tightly. If you can't readily resolve this, since your system is so new, I'd then suggest you call Apple.

  • How do I eliminat the blue background on some sites and on Print Preview?eviewpr

    Some sites I want to print show a blue background and some show it on the print preview even though their page backgrounds are not blue. The "Print Background" choice is not checked. This does not happen with Internet Explorer. I don't want to print wasting all the ink on the background. How can this be rectified?

    This can be a problem with Comcast Constant Guard (Keystroke protection)
    See:
    *[[/questions/870165]]

  • Search Hijack. My search has been hijacked by Yahoo. My search is set up for Google, and when I type in the bar is say google.co.uk, but a yahoo page still comes up.

    My search is set up correctly for Google, when I type a search "google.co.uk" is there in blue, but still a Yahoo search comes up on the web page.
    Help to stop this would be greatly appreciated.

    From the Safari menu bar, select
              Safari ▹ Preferences... ▹ Extensions
    Turn all extensions OFF and test. If the problem is resolved, turn extensions back ON and then disable them one or a few at a time until you find the culprit.

  • Help! My iBook G4 only gets to the blue background when I reboot!

    I have a 14" iBook G4, which I purchased several months ago, and twice since my purchase I have had an issue with starting up my computer. This time, however, it unexpectedly shut down and will not turn back on past the turquoise screen. So all I get is a start up apple logo with the spinny thing at the bottom and then nothing further except my cursor and the backdrop.
    Last time I had to do something with my apple key and some commands, does anyone know the exact process? If you do, can you please explain the step by step guide to fixing this. The service man on my campus thought it was a software problem. I have a paper that is only saved on my computer that is due next tuesday so I would love to get this resolved as soon as possible.
    Thank you very much.
    Go blue.
    ibook    

    Hi,
    You can try this as yesterday my friend faced a similar problem and we did this to get his machine back to life:
    1. Do you have a cd in the drive?
    Then while starting the computer press the trackpad, so that the cd ejects.
    2. Insert the system check cd, press c while you start, and run a system test, make sure everything is ok.
    3. Then you can insert the original panther cds, press c and the installation will start, you dont have to run it, just choose the disk utility, and verify the hard drive, hopefully by repairing the disk things will become alright.
    4. You can eject the cd and then try to reboot again.
    This is what helped us and we could get it to wokr again,
    Hope it helps,
    cheers
    karthik

  • IPad users guide states tap "done" when finished editing or typing Notes app - where is Done?

    Where is the so called "done" option in the Notes app?

    There isn't a Done button, the manual appears to be incorrect. I just tap the button bottom right of the keyboard (the one with the keyboard icon on it) to hide the keyboard when I've finished typing in the note

Maybe you are looking for