Blue dump Issue

Hi
I get blue dump issue 5 or 6 time in day .
Can you tell the reasons and the overcome solutions for this.
Regards
Amol

You will have to upload the .DMP file for analysis because there are literally thousands of things that can cause your system to crash.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

Similar Messages

I have purchased IPhone 5S in Florida Mall when I was traveling to US.I bought this phone in unlocked condition. (Pl find attached Invoice copy).I started my phone when I came back in India. After few days (4-5 days) it started giving blue dump regularly.

Dear All,
I have purchased IPhone 5S in Florida Mall when I was traveling to US from India.I bought this phone in unlocked condition. I started my phone when I came back in India. After few days (4-5 days) it started giving blue dump regularly. Then I have contacted Authorized service centre (Maple) in India (Maharashtra – New Mumbai) and then Maple checked with Apple and Apple said this phone is not under International Warranty. But when I purchased this phone form Apple Florida Mall ,I have been told by Zach McKenzie (Sales Person) that it has an international warranty and u can approach to any authorized centre in India for any issues. And that’s the reason I have bought this phone.
But now I am in big trouble so tell me how can u help me in this regards.

Note this is a user forum hosted by Apple. You aren't talking to Apple here just other users.
Note that the iPhone warranty is NOT international and never has been. Your iPhone must be serviced in the country of purchase.
https://www.apple.com/legal/warranty/

HP MediaSmart DVD software and major Blu-ray issues

In September 2010, I bought an HP Pavilion Elite HPE 250-f desktop computer (running Windows 7). This computer was advertised as having a Blu-ray DVD player, as well as players for regular DVDs and CDs. From September 2010 to October 2014, I successfully played regular DVDs and CDs. But in October 2014, for the first time, I needed to view a Blu-ray DVD. Specifically, I needed to view the "Divergent" Blu-ray.
When I tried to play the "Divergent" Blu-ray (which was made in 2014), the HP MediaSmart DVD software (version 3.1.1.3317) and the Windows Media Player detected the Blu-ray but were not able to play the Blu-ray.
Next, I downloaded the Media Player Codec Pack, http://download.cnet.com/Media-Player-Codec-Pack/3000-13632_4-10749065.html. This Codec Pack was supposed to help Windows Media Player play the Blu-ray. That did not work.
I then downloaded Cyberlink PowerDVD 14, which played the Blu-ray for only about 7 seconds before crashing.
I downloaded TotalMedia Theatre version 6.0.1.123. However, this software did not even detect the Blu-ray.
Recently, I decided to revisit this issue. I installed the most advanced version of HP MediaSmart DVD. I installed HP TouchSmart DVD, version 4.1.2.5122.
TouchSmart flawlessly played disk 1 of the 2-disk "Star Trek" Blu-ray set (made in 2009). However, TouchSmart was not able to play the "Divergent" Blu-ray at all. After failing to play the "Divergent" Blu-ray, TouchSmart attempted to play disk 2 of the "Star Trek" Blu-ray set. TouchSmart played disk 2 with poor video.
Next, for some strange reason, TouchSmart became totally inaccessible. I could not start TouchSmart. I rebooted the computer. TouchSmart was then able to play the "Divergent" regular DVD, but was unable to play the "Star Trek" Blu-rays at all.
I did a system restore to the point just after the installation of TouchSmart. TouchSmart played regular DVDs well, but still could not play the "Star Trek" Blu-rays at all.
Next, I got rid of TouchSmart and installed HP MediaSmart DVD, version 4.1.4229 (sp49489.exe). MediaSmart 4.1.4229 flawlessly played the "Speed" Blu-ray (made in 2006). However, MediaSmart 4.1.4229 failed to play either of the "Star Trek" Blu-rays. And after failing to play the "Star Trek" Blu-rays, MediaSmart 4.1.4229 played "Speed" with poor video.
So, it appears that any specific version of HP MediaSmart DVD software will play old Blu-rays successfully, and will then subsequently fail to play more advanced, more recent Blu-rays. After that version fails to play the more advanced Blu-rays, that version will play the old Blu-rays, not as flawlessly as before, but rather with poor video quality or not at all.
I have read many threads on the HP forums and on other forums about people having trouble playing Blu-ray DVDs on a wide variety of HP computers. I went back to the specifications of my HP computer, and I found the following disclaimer about that computer's Blu-ray capabilities:
As Blu-Ray is a new format containing new technologies, certain disc, digital connection, compatibility and/or performance issues may arise, and do not constitute defects in the product. Flawless playback on all systems is not guaranteed. In order for some Blu-ray titles to play, they may require a DVI or HDMI digital connection and your display may require HDCP support. HD-DVD movies cannot be played on this Desktop PC. Some HD DVD and Blu-ray advanced features may not be supported. CPU power is dedicated to support HD DVD and Blu-ray playback functions. It is recommended that you close all other applications before and during HD DVD and Blu-ray playback. HD DVD and Blu-ray movies will only play through the HD DVD and Blu-ray player software. Advanced Access Content System (AACS) keys are integrated into your PC for copy protection purposes. Occasional renewal of the AACS key is required, and easily done by connecting to the internet.
I believe that I have gone way above and beyond ordinary diligence, to try to get my computer to play Blu-ray DVDs. The disclaimer states that certain issues may arise and that flawless Blu-ray playback is not guaranteed for all systems. But certainly my frustrating experiences, and the frustrating experiences of others, go way beyond the leeway given by HP's disclaimer, do they not? Has anyone thought about the possibility of a class-action lawsuit against HP?

In "Device Manager", under "DVD/CD-ROM drives", I see the following:
hp BDDVDRW CH20L
I click on "hp BDDVDRW CH20L", and I see several tabs.
In the tab marked "Driver", we have the following:
Driver Provider:   Microsoft
Driver Date:           6/21/2006
Driver Version:     6.1.7601.17514
Digital Signer:      Microsoft Windows
In that same tab, clicking on "Driver Details" gives us the following:
Driver files:      C:\Windows\system32\DRIVERS\cdrom.sys
Provider:           Microsoft Corporation
File version:    6.1.7600.16385 (win7_rtm.090713-1255)
Copyright:       Microsoft Corporation. All Rights Reserved.
Digital Signer:   Microsoft Windows
I think that, back in October 2014, when this Blu-ray issue first came up, I updated the driver. That may be why you see the following different versions :
6.1.7601.17514
6.1.7600.16385 (win7_rtm.090713-1255)
So, how would I update the firmware? To what version should I update the firmware?

Please help!! x100e blue screen issue

Hey everyone,
I'm new on here, trying to help out my sister who's in school and so far failing miserably!
She has a x100e and developed the blue screen issue.
I did a bunch of reading on it- but have never seen an error message.
I formatted the hard drive for her (it needed it anyways) hoping that would help. It didn't. It also lost the wi-fi, I had to download a new driver from lenovo to get the wi-fi working again. It is now working, but still has the blue screen.
Any help? I wanna give it back to her but proving to be useless.
Thanks for any and all help!

How will anyone help you w/o error message on the top of blue screen and problem signature description?
x220 | i5-2520m | Intel ssd 320 series | Gobi 2000 3G GPS | WiFi
x220 | i5-2520m | hdd 320 | Intel msata ssd 310 series | 3G GPS | WiFi
Do it well, worse becomes itself
Русскоязычное Сообщество English Community Deutsche Community Comunidad en Español

Getting blue dump error 7E in Windows 7, need resolution.

I am getting blue dump error 7E in windows 7 32bit OS, please provide the resolution for it.

Hi Avdhesh infotech,
I suggest to upload the dump file for further troubleshooting, the file should be at: C:\Windows\Minidump. You can use OneDrive to upload this:
http://windows.microsoft.com/en-us/onedrive/add-photos-files
Regards
Wade Liu
TechNet Community Support

Have a Blue Screen issue, read this from Apple...

Just posting a link for people who may have the blue screen issue, I snagged this from another thread in hopes of bringing it out front more: http://docs.info.apple.com/article.html?artnum=306857

Hello rita240,
The steps below can help resolve issues with your iPhone's display.
This can include bright or dark pixels, lines in video, or sections of video missing.
Try turning iPhone off and then on again.
Verify the issue is not content related, by viewing different content.
If the image is too dark, adjust the brightness. In General Settings choose Brightness and Wallpaperand slide the slider.
My issue is still not resolved. What do I do next?
Contact Apple Support.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Cheers,
Allen

Equium A60: Blue Screen issue

I've got a Equium A60 Series (PSA667E), reconditioned. There's a blue screen apearing sometimes, when I start up, sending me a message of error. I've tried to upgrade my BIOS, as the website indicated. But a message tell me that I dont need, because its already upgraded. So, I've got the correct BIOS but my blue screen problem persist. What can I do....

Hi
Sometimes the blue screen appears because of serious software error or a hardware malfunction (memory). Well, its not easy to say why this message occurs in you case because we dont have detailed informations. Usually the OS installation solves commonly the blue screen errors. But if there is a hardware fault so only a ASP could solve this issue.

Windows 7 Blue Screen Issues With Alt-tabbing From WoW

As the title says, lately I've been having blue screens which are mostly caused by wow.
Previously I've had the occasional bsod (once a month or so) when alt tabbing, but it was pretty rare. However recently, I've had something more like 1 a day, usually caused by alt tabbing out of wow. It seems the longer I'm alt tabbed the more likely it
is to happen. I haven't experienced the same problem with any other game, although the occasional monthly ones usually happen when I'm changing my music as I alt tab out of League of Legends.
I downloaded bluescreenview and it appears the cause is some combination of win32k.sys as well as ntoskrnl.exe Based off the fact that it is happening more with a more demanding game, I'm guessing the problem is
most likely due to a bad stick of ram, but I'd like a second opinion.
I'll attach a few of the most recent dump files (the one today is slightly different than the ones last week which seems slightly odd).
http://puu.sh/8lVuH http://puu.sh/8lVtT http://puu.sh/8lVse
Thanks in advance for any help, and I hope image files are okay :)

Thanks, and it's not, no. You can't exactly debug pictures :')
We have two consistent bug checks:
SYSTEM_SERVICE_EXCEPTION (3b)
This indicates that an exception happened while executing a routine that transitions from non-privileged code to privileged code.
This error has been linked to excessive paged pool usage and may occur due to user-mode graphics drivers crossing over and passing bad data to the kernel code.
BugCheck 3B, {c0000005, fffff80002e5301e, fffff88008945c70, 0}
0: kd> ln fffff80002e5301e
(fffff800`02e52ff8) nt!ExEnterCriticalRegionAndAcquireFastMutexUnsafe+0x26 | (fffff800`02e53040) nt!PsIsProtectedProcess
^^ The exception occurred in nt!ExEnterCriticalRegionAndAcquireFastMutexUnsafe. This is a routine that first enters a critical region, and then acquires the specified fast mutex for the calling thread.
PAGE_FAULT_IN_NONPAGED_AREA (50)
This indicates that invalid system memory has been referenced.
Bug check 0x50 usually occurs after the installation of faulty hardware or in the event of failure of installed hardware (usually related to defective RAM, be it main memory, L2 RAM cache, or video RAM).
Another common cause is the installation of a faulty system service.
Antivirus software can also trigger this error, as can a corrupted NTFS volume.
BugCheck 50, {fffff900c25efcf0, 0, fffff9600032c69d, 0}
^^ Address fffff900c25efcf0 was written to by the instruction at address
fffff9600032c69d.
1: kd> r cr2
Last set context:
cr2=fffff900c25efcf0
^^ The 1st parameter address was stored in cr2 prior to calling the page fault handler.
1: kd> !pte fffff900c25efcf0
VA fffff900c25efcf0
PXE at FFFFF6FB7DBEDF90 PPE at FFFFF6FB7DBF2018 PDE at FFFFF6FB7E403090 PTE at FFFFF6FC80612F78
Unable to get PXE FFFFF6FB7DBEDF90
^^ Can't see whether or not it's valid/non-valid.
1: kd> .trap fffff880`073858e0
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=0000000000000011 rbx=0000000000000000 rcx=fffff900c376ae40
rdx=00000000701215e6 rsi=0000000000000000 rdi=0000000000000000
rip=fffff9600032c69d rsp=fffff88007385a70 rbp=0000000000000001
r8=0000000000000000 r9=0000000000000410 r10=fffff80002e4e000
r11=0000000000000022 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei pl zr na po nc
win32k!SFMLOGICALSURFACE::OwnsSurfaceCleanup+0x2d:
fffff960`0032c69d 488b4f20 mov rcx,qword ptr [rdi+20h] ds:00000000`00000020=??????????
^^ On the instruction we failed on, address fffff960`0032c69d deferenced
rdi+20h where rdi is 0000000000000000. All of this would result in a memory write to the address
00000000`00000020.
1: kd> dd 00000000`00000020
00000000`00000020 ???????? ???????? ???????? ????????
00000000`00000030 ???????? ???????? ???????? ????????
00000000`00000040 ???????? ???????? ???????? ????????
00000000`00000050 ???????? ???????? ???????? ????????
00000000`00000060 ???????? ???????? ???????? ????????
00000000`00000070 ???????? ???????? ???????? ????????
00000000`00000080 ???????? ???????? ???????? ????????
00000000`00000090 ???????? ???????? ???????? ????????
Right, so the code wanted to write to 00000000`00000020 which as we can see above is a completely invalid address. The 1st parameter and cr2 however note we failed writing to address
fffff900c25efcf0. This does not make sense, and is essentially not logically possible.
The hardware was told to write to 00000000`00000020, and the hardware came back and said 'I cannot write to
fffff900c25efcf0'. Another way to think about it is if you kindly asked the waiter of your table for more water, he writes it down, but comes back and says 'I'm sorry, but we're all out of coffee'.
1. Uninstall any/all installed Asus bloatware, I for example see Asus PC Probe, and AI Suite.
2. Remove and replace avast! with Microsoft Security Essentials for temporary troubleshooting purposes as it may be causing conflicts:
avast! removal -
http://www.avast.com/uninstall-utility
MSE -
http://windows.microsoft.com/en-us/windows/security-essentials-download
3. If the above fails, you have faulty RAM.
Regards,
Patrick
“Be kind whenever possible. It is always possible.” - Dalai Lama

Ipad mini retina blue screen issue after ios 8 update

After update to iOS8 over wifi, my iPad Mini with Retina Display is working perfectly, however I had an issue twice since yesterday. While using it, I observed the screen became totally blue (like Windows crashing) and the ipad restarted. Anyone facing such issues?

(A) Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.
(B) Try reset all settings
Settings>General>Reset>Reset All Settings
Note: Data will not be affected but settings for Wi-Fi, FaceTime, Message, Home Sharing will be reset

ABAP Dump issue while accessing Gateway

Hi
We have recently upgraded our Gateway server to SP03. Eversince after service generation while accessing the XML/Metadata from the consumption page we get an HTTP error with Dump. Has anyone faced this problem before.
<?xml version="1.0" encoding="utf-8" ?>
- <error xmlns:xsi="http://www.w3.org/2001/XMLSchema-Instance">
<code>HTTP/500/E/Internal Server Error</code>
<message>Call of service /sap/opu/sdata/sap/Z14335_RFC_BP_1/ terminated because of an error. The following error text was processed in system AC1 : Syntax error in program /IWCOR/CL_REST_HTTP_HANDLER===CP .The error occurred on the application server njsapnet3. The termination type was: RABAX_STATE.If the termination type is RABAX_STATE, you will find more information on the cause of termination in system AC1 in transaction ST22. If the termination type is ABORT_MESSAGE_STATE, you will find more information on the cause of termination on the application server njsapnet3 in transaction SM21. If the termination type is ERROR_MESSAGE_STATE, you can search for further information in the trace file for the work process in transaction ST11 on the application server njsapnet3. You may also need to analyze the trace files of other work processes. If you do not yet have a user ID, contact your system adminmistrator.</message>
</error>

Hi All,
I am also facing the same issue.
When i am executing query/read operation my service it will works properly and getting data also,but when i am trying get X-CSRF token it throws error(ABAP Dump) .Can you please help me out this issue.
Based on the Tx: ST11..getting below log.
A ABAP Program /IWCOR/CL_REST_HTTP_HANDLER===CP        .
A Source /IWCOR/CL_REST_HTTP_HANDLER===CCIMP      Line 40.
A Error Code ASSERTION_FAILED.
A Module abassert.c.
A Function ab_aabAssertionFailedRabax Line 1880.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
N
N Thu Jan 03 15:00:58 2013
N *** ERROR => System ID and client from ticket are not the same than mine. [ssoxxkrn.c   1065]
N {root-id=0050569E07B31ED295B108EAC1527575}_{conn-id=0050569E07B31ED295B108EABC707575}_1
N *** ERROR => Neither was ticket issued by myself nor can I find issuer in TWPSSO2ACL (see note 1055856). [ssoxxkrn.c   1071]
N {root-id=0050569E07B31ED295B108EAC1527575}_{conn-id=0050569E07B31ED295B108EABC707575}_1
i am getting based on Tx:ST22
Category
ABAP Programming Error
Runtime Errors
ASSERTION_FAILED
ABAP Program
/IWCOR/CL_REST_HTTP_HANDLER===CP
Application Component OPU-FND-CCL
Note: I am using SAP NW-GW-SP04
Thanks,
Syam

Thread Dump issue with LD_ASSUME_KERNEL=2.4.1

Hi ,
When I take Thread Dump using 'jstack <PID>' in JDK 1.5 it givss me "sun.jvm.hotspot.debugger.DebuggerException" in the dump nothing more
I set LD_ASSUME_KERNEL=2.4.1 in my server to avaoid some other issue ( JVM crash some times)
Surprisingly, I can not stop my server ( my java process ) after that using our Shutdow scripts , Ctrl C or even "kill -9 <PID>",
I have to restart the machine or manually release uncleaned resources that my server occupied and restart the server
This happens Redhar 9 as well as in Linux ES.
Anybody faced similar problem?
Any help or information regarding this is highly apprecialted
Vasu
Thread Dump Output:
Caused by: sun.jvm.hotspot.debugger.DebuggerException: get_thread_regs failed for a lwp
at sun.jvm.hotspot.debugger.linux.LinuxDebuggerLocal.getThreadIntegerRegisterSet0(Native Meth
od)
at sun.jvm.hotspot.debugger.linux.LinuxDebuggerLocal.access$800(LinuxDebuggerLocal.java:34)
at sun.jvm.hotspot.debugger.linux.LinuxDebuggerLocal$1GetThreadIntegerRegisterSetTask.doit(Li
nuxDebuggerLocal.java:431)
at sun.jvm.hotspot.debugger.linux.LinuxDebuggerLocal$LinuxDebuggerLocalWorkerThread.run(Linux
DebuggerLocal.java:109)
sun.jvm.hotspot.debugger.DebuggerException: sun.jvm.hotspot.debugger.DebuggerException: get_thread_re
gs failed for a lwp
at sun.jvm.hotspot.debugger.linux.LinuxDebuggerLocal$LinuxDebuggerLocalWorkerThread.execute(L
inuxDebuggerLocal.java:134)
at sun.jvm.hotspot.debugger.linux.LinuxDebuggerLocal.getThreadIntegerRegisterSet(LinuxDebugge
rLocal.java:437)
at sun.jvm.hotspot.debugger.linux.LinuxThread.getContext(LinuxThread.java:48)
at sun.jvm.hotspot.runtime.linux_x86.LinuxX86JavaThreadPDAccess.getCurrentFrameGuess(LinuxX86
JavaThreadPDAccess.java:75)
at sun.jvm.hotspot.runtime.JavaThread.getCurrentFrameGuess(JavaThread.java:252)
at sun.jvm.hotspot.runtime.JavaThread.getLastJavaVFrameDbg(JavaThread.java:211)
at sun.jvm.hotspot.tools.StackTrace.run(StackTrace.java:42)
at sun.jvm.hotspot.tools.JStack.run(JStack.java:41)
at sun.jvm.hotspot.tools.Tool.start(Tool.java:204)
at sun.jvm.hotspot.tools.JStack.main(JStack.java:58)
Caused by: sun.jvm.hotspot.debugger.DebuggerException: get_thread_regs failed for a lwp
at sun.jvm.hotspot.debugger.linux.LinuxDebuggerLocal.getThreadIntegerRegisterSet0(Native Meth
od)
at sun.jvm.hotspot.debugger.linux.LinuxDebuggerLocal.access$800(LinuxDebuggerLocal.java:34)
at sun.jvm.hotspot.debugger.linux.LinuxDebuggerLocal$1GetThreadIntegerRegisterSetTask.doit(Li
nuxDebuggerLocal.java:431)
at sun.jvm.hotspot.debugger.linux.LinuxDebuggerLocal$LinuxDebuggerLocalWorkerThread.run(Linux
DebuggerLocal.java:109)
sun.jvm.hotspot.debugger.DebuggerException: sun.jvm.hotspot.debugger.DebuggerException: get_thread_re
gs failed for a lwp
at sun.jvm.hotspot.debugger.linux.LinuxDebuggerLocal$LinuxDebuggerLocalWorkerThread.execute(L
inuxDebuggerLocal.java:134)
at sun.jvm.hotspot.debugger.linux.LinuxDebuggerLocal.getThreadIntegerRegisterSet(LinuxDebugge
rLocal.java:437)

@brain0
I've downloaded the glic-2.3.6 sources from gnu, so I could build it from those. I'm however reluctant to do this because I really don't want to break my install.
I do agree with you on the NPTL statement, but pvs relies on allegro, which relies on LinuxThreads. Allegro is not being ported to new versions of glibc, so that approach is unfortunately not viable.
@iphitus
I wasn't very specific - it's allegro as in a lisp environment.
I think I'll try and install an old version of arch on wmware instead. Is there anywhere you can check out glibc version numbering on old arch install isos (ie. do I need arch-0.[1-9].iso)? And anywhere you can download the old isos (tried filewatcher, but a lot of the older sites seem broken)?
Thanks for the replies,
Mads
PS. I noticed that you recommended slackware for old kernels in another thread. I'm however in a bit different situation as I need old versions of glibc. Furthermore I would prefer sticking to arch, but was wondering whether there were any specific reasons for not doing that.

ALV GRID short dump issue

could anybody advice, ALV GRID FM(field catalog issue)is getting short dump, but workig fine for ALV LIST.
PERFORM create_field_catalog USING:
    'TRAFFIC_LIGHT' ' ' 15 'Status'   'Status' ' ',
    'VKORG'     ' ' 15 'Sales Org'    'Sales Org' ' ',
    'VTWEG'     ' ' 15 'Dist Channel' 'Dist Channel' ' ',
    'KUNRG'     ' ' 15 'Payer'        'Payer' ' ',
    'PAYER'     ' ' 15 'Payer Name'   'Payer Name' ' ',
    'KUNAG'     ' ' 15 'Ship-To'      'Ship-To' ' ',
    'SHIPTO'    ' ' 15 'Ship-To Name' 'Ship-To Name' ' ',
    'SHIPTOPAR' ' ' 15 'Bill to Party' 'Bill To Party' ' ',
    'KDGRP'     ' ' 15 'Customer Grp' 'Customer Grp' ' ',
    'ZCUSTPO'   ' ' 15 'Customer PO' 'Customer PO' ' ',
    'VBELN'     ' ' 15 'Billing Doc' 'Billing Doc' ' ',
    'FKDAT'     ' ' 15 'Billing Date' 'Billing Date' ' ',
    'FKART'     ' ' 15 'Billing Type' 'Billing Type' ' ',
    'ZOUTPUT'   ' ' 15 'Output Type' 'Output Type' ' ',
    'NETWR'     ' ' 15 'Net Value'    'Net Value' 'X',
    'KWERT'     ' ' 15 'Total VAT'    'Total VAT' 'X',
    'WAERK'     ' ' 15 'Currency'     'Currency' ' ',
    'XBLNR'     ' ' 15 'Reference'    'Reference' ' ',
    'DELNO'     ' ' 15 'Delivery #'   'Delivery #' ' ',
    'TLINE'     ' ' 15 'Manifest #'   'Manifest #' ' ',
    'ZBOL'      ' ' 15 'Bill Of Ldng' 'Bill of Ldng' ' ',
    'LIFEX'     ' ' 15 'Ext Del #'    'Ext Del #' ' ',
    'POSNR'     ' ' 15 'Item'         'Item' ' ',
    'MATNR'     ' ' 18 'Material'     'Material' ' ',
    'KDMAT'     ' ' 15 'Cust Matl'    'Cust Matl' ' ',
    'WERKS'     ' ' 15 'Plant'        'Plant' ' ',
    'ZZPLAT'    ' ' 10 'Platform'     'Platform' ' ',
    'ZZPRONUM' ' ' 10 'Program'      'Program' ' ',
    'ZZPROCODE' ' ' 10 'Prod Code'    'Prod Code' ' ',
    'FKIMG'     ' ' 15 'Qty'          'Qty' ' ',
    'VRKME'     ' ' 15 'UoM'          'UoM' ' ',
    'ARKTX'     ' ' 15 'Description' 'Description' ' ',
    'KBETR'     ' ' 15 'Price'        'Price' ' ',
    'VATRT'     ' ' 15 'VAT Rate'     'VAT Rate' ' ',
    'KWERT_D'   ' ' 15 'Item VAT'     'Item VAT' 'X',
    'NETWR_D'   ' ' 15 'Item Net Value' 'Item Net Value' 'X',
    'VGBEL'     ' ' 15 'Ref Document' 'Ref Document' ' ',
    'VGPOS'     ' ' 13 'Ref Doc Line' 'Ref Doc Line' ' ' .
FORM create_field_catalog USING fieldname TYPE c
                                inttype   TYPE c
                                outputlen TYPE i
                                coltext   TYPE c
                                seltext   TYPE c
                                do_sum    TYPE c.
DATA: l_f_fieldcat TYPE slis_fieldcat_alv.
l_f_fieldcat-fieldname    = fieldname.
l_f_fieldcat-inttype      = inttype.
l_f_fieldcat-outputlen    = outputlen.
l_f_fieldcat-seltext_m    = coltext.
l_f_fieldcat-seltext_l    = seltext.
l_f_fieldcat-reptext_ddic = coltext.
l_f_fieldcat-do_sum     = do_sum.
APPEND l_f_fieldcat TO t_field_catalog.
CLEAR l_f_fieldcat.
ENDFORM.   "CREATE_FIELD_CATALOG
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
        EXPORTING
          i_callback_program      = v_repid
          i_callback_user_command = 'F_USER_COMMAND'
          i_grid_settings         = f_grid_settings
          is_layout               = f_grid_layout
          is_print                = f_print_settings
          i_background_id         = 'BACK'
          it_events               = t_events[]
          it_fieldcat             = t_field_catalog
          it_sort                 = t_sortcat[]
          i_default               = 'X'
          i_save                  = 'A'
          is_variant              = f_variant
        TABLES
          t_outtab                = t_output4
        EXCEPTIONS
          program_error           = 1
          OTHERS                  = 2.

BEGIN OF t_output4 OCCURS 0,
        traffic_light TYPE c,
        vkorg LIKE vbrk-vkorg,
        vtweg LIKE vbrk-vtweg,
        kunrg LIKE vbrk-kunrg,
        payer LIKE adrc-name1,
        kunag LIKE vbrk-kunag,
        shipto LIKE adrc-name1,
        shiptopar LIKE likp-kunnr,
        kdgrp LIKE vbrk-kdgrp,
        zcustpo LIKE vbkd-bstkd,
        vbeln LIKE vbrk-vbeln,
        fkdat LIKE vbrk-fkdat,
        fkart LIKE vbrk-fkart,
        zoutput LIKE dnast-kschl,
        netwr LIKE vbrk-netwr,
        kwert LIKE konv-kwert,
        waerk LIKE vbrk-waerk,
        xblnr LIKE vbrk-xblnr,
        delno LIKE likp-vbeln,
        t_line LIKE tline-tdline,
        zbol LIKE likp-bolnr,
        lifex LIKE likp-lifex,
        posnr LIKE vbrp-posnr,
        matnr LIKE vbrp-matnr,
        kdmat LIKE lips-kdmat,
        werks LIKE vbrp-werks,
        zzplat LIKE vbrp-zzplat,
        zzpronum LIKE vbrp-zzpronum,
        zzprocode LIKE a802-zzprocode,
        fkimg LIKE vbrp-fkimg,
        vrkme LIKE vbrp-vrkme,
        arktx LIKE vbrp-arktx,
        kbetr LIKE konv-kbetr,
        vatrt TYPE p DECIMALS 1,
        kwert_d LIKE konv-kwert,
        netwr_d LIKE vbrp-netwr,
        vgbel LIKE vbrp-vgbel,
        vgpos LIKE vbrp-vgpos,
      END OF t_output4,

DTP Short dump issue

Hi Expert,
I face a DTP shortdump issue on loading data from PSA to DSO
The DSO is write optimize.
DTP is using symantic loading and support 3 processor, pack size is default
Situation is as below:
1. This issue occurs every two days. In some situation, it will occur everday
2. The DTP will face short dump. Then when we rerun the DTP, everything goes will
3. Not all the system face this issue (for example, we have dev/qas/prd, this issue cannot be reproduced in qas)
Below is the shortdump point in ST22
   when '3'.
      select single * from rsmonicdp into l_s_monicdp where
             rnr   = l_rnr and
             icube = p_ods and
             dp_nr = i_datapakid.
      if sy-subrc <> 0.
        data: l_s_iccont type rsiccont.
        data: l_s_reqdone    type rsreqdone.
        select single * from rsreqdone into l_s_reqdone where
               rnr = l_rnr.
        if sy-subrc <> 0.
          message x000.
        endif.
        l_s_reqdone-datum = l_s_reqdone-datum + 3.
        if l_s_reqdone-datum < sy-datum.
          select single * from rsiccont into l_s_iccont where
                 rnr   = l_rnr and
                 icube = p_ods.
          if sy-subrc <> 0.
            exit.
          else.
            message x000.
          endif.
        else.
           message x000. (Shortdump here)
        endif.
      endif.
      l_s_monicdp-status     = icon_red_light.
Could you kindly let me know you face simulation issue before and possible solution?
Thanks and best regards
Alex yang

Hi KP,
Thanks for your information.
Please check below information in ST22 side
Error analysis
    Short text of error message:
Status Manager *****
    Long text of error message:
    Technical information about the message:
    Message class....... "RSSTATMAN"
    Number.............. 000
    Variable 1.......... " "
    Variable 2.......... " "
    Variable 3.......... " "
    Variable 4.......... " "
How to correct the error
    Probably the only way to eliminate the error is to correct the program.
    If the error occures in a non-modified SAP program, you may be able to
    find an interim solution in an SAP Note.
    If you have access to SAP Notes, carry out a search with the following
    keywords:
    "MESSAGE_TYPE_X" " "
    "CL_RSSM_STATMAN_TARGET_ODSO===CP" or "CL_RSSM_STATMAN_TARGET_ODSO===CM007"
    "IF_RSBK_DATAPACKAGE_OBSERVER~UPDATE_STATUS_TABLES"
BTW, do you think this issue will be related to larger data volum in DSO side?
Thanks and best regards
Alex yang

Excel Dump Issue

Dear All,
    I have used a standard FM MS_EXCEL_OLE_STANDARD_DAT to get the data from internal table directly into excel.
But the issue is if the length of Header field and Respective Item field is not equal then i am getting short dump.
I should have the item table field data should be independent of Header data field length.
eg:
Project Status           Start Date
NOCH                     4/1/2008
in the above given eg header of 1st field Project Status is 14 char, where as NOCH is only 4 char,
but when i give the same i am getting Short dump when i give NOCH also of 14 char then it is not giving any short dump.
Appreciate for any replys
Thanks & Regards
NSK

Kindly Refer ...
TABLES: USR03,DD02L.
DATA: YX030L LIKE X030L.
DATA BEGIN OF YDFIES OCCURS 0.
     INCLUDE STRUCTURE DFIES.
DATA END OF YDFIES.
DATA: BEGIN OF FLDITAB OCCURS 0,
      FLDNAME(11) TYPE C,
      END OF FLDITAB.
DATA ITABUSR03 LIKE USR03 OCCURS 0 WITH HEADER LINE.
DATA TNAME LIKE DD02L-TABNAME.
SELECT * FROM USR03 INTO TABLE ITABUSR03.
TNAME = 'USR03'.
PERFORM GETFIELEDS.
PERFORM SHOW123.
FORM GETFIELEDS.
     CALL FUNCTION 'GET_FIELDTAB'
      EXPORTING
          LANGU              = SY-LANGU
          ONLY               = SPACE
          TABNAME            = TNAME
          WITHTEXT           = 'X'
      IMPORTING
          HEADER             = YX030L
      TABLES
          FIELDTAB           = YDFIES
      EXCEPTIONS
          INTERNAL_ERROR      = 01
          NO_TEXTS_FOUND      = 02
          TABLE_HAS_NO_FIELDS = 03
          TABLE_NOT_ACTIV     = 04.
     CASE SY-SUBRC.
        WHEN 0.
          LOOP AT YDFIES.
               FLDITAB-FLDNAME = YDFIES-FIELDNAME.
               APPEND FLDITAB.
          ENDLOOP.
        WHEN OTHERS.
             MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
              with SY-SUBRC.
      ENDCASE.
ENDFORM.
FORM SHOW123.
CALL FUNCTION 'MS_EXCEL_OLE_STANDARD_DAT'
     EXPORTING
          FILE_NAME                 = 'C:USR03.XLS'
          DATA_SHEET_NAME           = 'USER LIST'
    TABLES
         DATA_TAB                  = ITABUSR03
         FIELDNAMES                = FLDITAB
    EXCEPTIONS
         FILE_NOT_EXIST            = 1
         FILENAME_EXPECTED         = 2
         COMMUNICATION_ERROR       = 3
         OLE_OBJECT_METHOD_ERROR   = 4
         OLE_OBJECT_PROPERTY_ERROR = 5
         INVALID_FILENAME          = 6
         INVALID_PIVOT_FIELDS      = 7
         DOWNLOAD_PROBLEM          = 8
         OTHERS                    = 9.
IF SY-SUBRC 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.
Regards
Renu

Dump issue in standard transaction

I am getting a dump error in a standard transaction while clicking save option,
could you please confirm me whether the issue is with SAP standard transaction path fill missing or some thing else since when we will do the same steps in same transaction to some other server its not giving dump error.
Should I've to do any code changes in the standard transaction by registering access key request or is there would be any basis related issue.
Also, I debugg a lot and not sure from where the issue is comming.
Please suggest.

I'm done with the debugging and found the reason for the problem.
Secondly as I said it a pure slandered transaction and we have not done any code changes, enhancement, BDT/BRF etc
so there in no way to get into depth for debugging since every line of code would be correct but the we need to find out where and why its getting stuck and throughing the dump.
Where
                In DSAVE BRF event only its giving error as error message = E once no entry found in the internal table. however it has to get some data from some where but unfortunately its not collecting the data so it remain initial and its result error type and E which indicate dump with logical (feeder) system not determine
Why
             SAP insurance module consist of CD, CM, ISM, Banking and where BP will act as a central component,
so there would be by default integration between BP and CD,CM,ICM,Banking. But I think the default connection between these all is not exist in our server, therefore once we are clicking save option in our process its not getting the path for interconnection with CM.
Final conclusion the integration between BP and CM is not establish hence its giving dump.
So could any one please tell me how to establish the integration between BP an CM, it might be related to BASIS issue but I welcome all who ever can provide the solution. (Might be we have to do some configration or something in SPRO-cross application - SAP BP - etc. )
Edited by: Helpfriends on May 23, 2011 10:15 AM

Blue dump Issue

Similar Messages

Maybe you are looking for