Blue/green eye correction ability

In addition to red eye correction, add blue eye and green eye correction.  I shoot a lot of dogs and other animals in the field, and their retinas have fewer color nerve cells which causes them to reflect a turquoise or green strobe.  The red eye correction is useless for this.  It should be easy enough to reuse some red eye code to add this capability.  Currently I have to mess around with the brushes, sometimes a lot, to remove a blue or green eye.  I dont see that this has been requested yet and I'm a bit surprisded by that.

George,
This was just suggested recently on Adobe's new feature request site - maybe go weigh in there.
http://feedback.photoshop.com/photoshop_family/products/photoshop_family_photoshop_lightro om
Rob

Similar Messages

  • My Photoshop (CS4) Red Eye Correction always makes the eyes a dark blue.  ??

    What if the person in the photograph has medium brown eyes?  How do I get the Red Eye Correction to stop always making the eyes a dark blue?  Can't find out how to change the color cast.  The software is Photoshop (CS4) for Mac.

    It's in the Spot Healing pop-out, but I never use it.  There is an option in Camera RAW, but prefer to use a Hue/Saturation layer.  Select both pupils with the eliptical marquue tool > Open the H/S layer, and adjust hue, sat, and lightness if required.
    or
    Open the H/S layer with no selection in place, and use the RGB drop-down and select the Reds.  Then adjust hue, sat, lightness.  Invert the layer mask, and paint back in with a soft white brush.

  • Laserjet 2605dn color printing problem, Blue/green line on page.

    I have an HP color laserjet 2605dn that has started to print a faint,thin  blue/green line from top to bottom about 3 inches in from the entire right edge of every page. I ran the cleaning cycle with no change. Any suggestions on how to correct this?

    I have very similar problem on my 2600n which is printing 2 vertical green lines very close together about 1.5 inches from left edge. All toners are in supply override mode with black toner reading: Estimated Pages Remaining 0
    Color cartridges contain toner with 329 pp remaining according to supply status page.
    Is this problem likely to disappear when toner cartridge(s) are replaced?

  • Iphone 4 showing&taking pictures with Blue/Green Spot in the Middle

    I have the blue/green spot in the middle of the screen while and after taking the photo especially on white ground/wall or paper.
    Another thing is that My iPhone 4 back camera takes very yellow photos in artificial light.
    So Apple should immediatelly fix this issue. Even I am not able to understand why Apple did not test such basic possible problems.
    As you can see from the internet there are many iphone 4 owners and increasing suffering because of this problem.
    I wonder how many phones returned to Apple Stores everyday!!!

    Dear all,
    As a image scientist, I think iphone 4 camera image quality is very good. It keep most of the details with the cost of noise, but I prefer this style. Most important is iphone 4 color reproduction is very saturated, it's pleasing.
    However, green spot problem always annoys me.
    I made an app for this problem. It can perfectly correct this problem.
    You can see lots of images of green spot on real scenes. Of course there're images after corrections.
    http://alturl.com/cme7b
    We solved it perfectly.
    The App status is waiting for review.
    I will post information if it's on iTune.
    Here're screenshot for it .
    http://www.facebook.com/album.php?aid=10842&id=110149482384202

  • PSE 7 Green Eyes

    I obtained a trial version of PSE 7.0 to try to correct green eyes in photos of our Westies. The Photoshop web site says the red-eye fix in Quick Fix also removes green and white eyes for animals. I tried it on three photos, and it does not. I also tried the red-eye fix in Full Edit, and it does not.
    Am I doing something wrong or missing something, or is the web site wrong?
    Thanks,
    [email protected]

    >The Photoshop web site says the red-eye fix in Quick Fix also removes green and white eyes for animals
    If the website says that, the website lies. However, you can do this a number of different ways: select the part of the eye you want to fix (the magic wand may work for this), then go to Layer>New Adjustment Layer and create a hue/saturation adjustment layer. Use the sliders to adjust the color. (If the eye is totally white you may need to turn on the colorize checkbox before the sliders will do anything).

  • Red eye correction creates a black eye

    I am using iPhoto 6.0.6 (322) and when I use red eye reduction the command creates a blue-black blob of color that not only covers the red eye, it covers the eye socket and then some. I have used red eye reduction hundreds of times and this is something new. Any ideas out there?
    Thanks
    Ken

    Ken,
    There is a hidden feature to control the red-eye and retouch tools:
    Type Caps lockControl9
    Undo caps lock
    Click on Retouch or the Red-Eye Removal tool.
    The tab key will toggle between cursor types: a cross or a circle for Red-Eye removal tool, and between darken and lighten in the Retouch tool.
    The \[ and \] keys decrease or increase the size accordingly.
    NOTE: Using the { and } keys will will change the value next to the circle and that represents the degree of change or intensity that the Retouch tool imparts on each pass. To get a lighter pupil with the red-eye tool, Shift-Click inside the circular cursor.
    The keystrokes are awkward at first, but I've found that with this method I get better red-eye correction with iPhoto than I do with Photoshop Elements 4.
    Regards.

  • Pet eye correction tool doesn't work as I expected.

    I read the Help file info and watched the video for using the Pet-eye correction tool.  The photo they used was a dog.
    I have cats, so I tried it with a cat photo.  In the photo I used, the pupil (center of the eyes) are olive green, with the white dot.  The area surrounding the eyes are yellow, the normal color. I expected the tool to darken ONLY the green.
    For the attached photo, the settings I used are pupil radius-4%, darken 26%.  (I did try other settings/combinations.) No matter where in the green area I clicked, almost all of the entire eye turned dark, NOT just the pupil.  I can do a better job manually.
    This is very disappointing, as this tool is the main reason that I'm evaluating Elements 12.

    Hi,
    That is what I thougth as well. According the manual you can use an expresion, column, constant or bind variable for N.
    N determines the nth row for which the measure value is to be returned. n can be a
    constant, bind variable, column, or an expression involving them, as long as it
    resolves to a positive integer. The function returns NULL if the data source window
    has fewer than n rows. If n is null, then the function returns an error.
    Regards,
    Peter

  • Has anyone experience a bug with red eye correction in LR 5?

    No matter what I do, anytime I try to use the red-eye correction tool, I get the message "Unable to find red eye".  Even in pictures where the red eye is huge and clearly visible.  Has anything changed in LR 5 that would cause this?  I have Red Eye Correction enabled.  Anyone else experiencing this?
    I'm a rather new LR user, so I'd be grateful for someone pointing me in the right direction before I file a bug report.
    Thanks!

    runningkatze wrote:
    Thanks Rob...
    You bet .
    runningkatze wrote:
    In LR 4, the tools seemed so much more forgiving.  In LR 5, it is incredible sensitive.
    I don't think there have been any algorithmic changes in red-eye, Lr5 vs. Lr4 (certainly none mentioned by Adobe, nor in Victoria Bampton's very thorough list of changes in Lr5, nor that I've noticed in the forums...), so if it is behaving differently (you sure it's not you? ), then it sounds like something is a-wonk now in your Lr5 (or was a-wonk before in your Lr4 ).
    ~R.

  • Red eye correction

    I am a brand new pse user, trying to understand the 'versions' concept. Everything I have read suggests saving your edits as a version of the original. Would there be a downside to overwriting the original with red eye corrected version instead of another copy?

    Yes, particularly if you are using the auto red eye tool, which often corrects bright white teeth, light soures, etc. in place of the red eyes. If you really want to lose the original (not recommended) you can use the red eye tool in the editor and set PSE to save over the existing file. But a couple of years from now, when you have more sophisticated skills to use rather than the red eye tool, you may regret not being able to go back and redo them.

  • Red-Eye Correction Malfunctioning

    When I try to use the Red-Eye correction tool in iPhoto, it either doesn't work at all, or it will correct a random spot of the picture instead of the eyes. Any clues?

    Try this basic fix: trash the com.apple.iPhoto.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards. These include minor settings like the window colour and so on. Note: If you've moved your library you'll need to point iPhoto at it again.)
    Regards
    TD

  • Red eye correction in elements 12 corrects everything but the eye. Had this problem on previous Mac.

    How can I get the elements 12 red eye correction to target the iris? I can correct photo in Iphoto program in Mac os x, version 10.9.2.

    Drag a box around it with the tool.

  • Where is the red eye correction tool now?

    Can't find it anywhere.  Why did they remove it? (iphone 6)

    Can't find it anywhere.  Why did they remove it? (iphone 6)
    In the Photos.app.  When you select a photo and click "edit", there is an eye icon at the upper border of the panel. That is the "red eye" correction tool.

  • Red-Eye Correction Tool Missing Sliders in 2.5

    I just upgraded from 2.4 to 2.5, build 605155.  The sliders are missing from the Red-Eye Correction Tool.
    Any idea where they went?

    The text should replaced by the sliders after you have clicked on the red area. If it doesn't, the area you clicked on doesn't match the parameters for the tool (unusual if red or near red) or the Lightroom preference file is corrupted.
    You can try trashing the existing Lr preference file, which is located as described at the following link http://forums.adobe.com/thread/358041?tstart=0

  • Red eye correction not saving, Red eye correction not saving

    I open iphoto and try to auto-fix red eye in one picture but it's not an option. So I manually fix it but once I hit "done" the red eye correction does not save. I have iphoto'11.

    I hit "done" the red eye correction does not save.
    Perhaps your library is corrupted. Try to repair your iPhoto library.
    Launch iPhoto with the key combination ⌥⌘ held down and try the first aid options "repair permissions" and "repair database", if necessary also "rebuild database". Before you do any repairing, make sure that the backup of your iPhoto library is up to date.
    Regards
    Léonie

  • How to get rid of "green eye" in pet photos?

    Any suggestions for getting rid of the pet equivalent of red eye?  I have tried the various LR tools and can't find one that works?
    Thanks,

    Thanks, I will try that also,  I found the following (quoted below) on another forum, and it worked the best so far, I followed the instructions, except I chose red as the color and used 100% saturation.  This resulted in a darker brownish eye, I will now try your suggestion  and adjust exposure and brightness.
    "I finally found a green-eyed source image to test. Create an adjustment brush with the following settings: Brightness: -100
    Saturation: -50
    Color: Set Hue to 294 and Saturation to 20
    Size = Size of Animal Eye
    Feather ~ 10-20
    Flow: 100
    Density: 100
    Auto Mask: Unchecked. Set brush over eye. One Click. The Color in the Picker may have to be tweaked slightly to offset your particular shade of green. Usually adjusting the color picker saturation up or down will get rid of any cast.
    Last edited by RikkFlohr; 3 Jan 2011 at 7:50 am."
    ~Rikk Flohr
    Lightroom Keyword Lists at http://rikkflohr.com Digital Imaging Blog athttp://fleetingglimpseimages.wordpress.com and Cropping Blog at http://holycrop.wordpress.com
    Desktop: Win 7 64Bit, QuadCore, 6 GB, 2.6 TB of HD spread across 5 disks: 2 Internal-3 External
    Laptop: Mac PowerBook 13", OSX 10.6.3, 2.4 DualCore, 4 GB, CS4, & Win 7 64Bit via Bootcamp

Maybe you are looking for

  • Why can't I print a pfd download?

    i can not print an attachment that is a pfd download

  • I get an error message when updating CC apps. I'm using a Mac Mini. Anyone know why?

    My computer keeps alerting me that there are updates to my CC applications. But partway through updating, I get an error message saying it couldn't be completed. I'm running Mac Version 10.7.5. My computer is a Mac Mini with a 1.83 GHz Intel Core 2 D

  • USER DEFINED FUNCTION in the formula editor

    How do you create a USER DEFINED FUNCTION in the formula editor using BADI

  • Currency Format in report

    I am currently working on a german report. I need to display the currency values in german format. For example if we have "2,345,223.55" it needs to be displayed as "2.345.223,55". the source of these values are formula and summary columns. I have tr

  • TRANSFERRING MUSIC FROM IPOP TO PC

    I had a hard drive crash and I lost all my dowloaded music from I Tunes library. I am trying to determine if there is a way to transfer my music collection from my nano to my new pc (Inspiron 531 deskstop). I shudder at the thought of re-loading 75 C