Blue Icicle mic not working

Hello
Tried all the internet fixes ASIO4 all and so on
and still my blue icicle mic does not work with Premiere 11 elements
It works in windows movie maker, AVS, and all the other software I have
anyone out there have a solution
thank you

Welcome to the forum.
Premiere has some problems with USB connected mics. Some work, but some do not. I do not recall any posts specific to the Blue Icicle XLR to USB setups, in either the PrE, or PrPro Forums. I have not seen mention of it in the Audition Forum, but spend a lot less time there, so you might do a Search of that forum. Though there are differences between Premiere and Audition, there are some similarities, as well.
As a test, I would borrow a mic that plugs directly into the sound card/mic input, and see if PrE sees that.
Good luck,
Hunt

Similar Messages

  • IPhone 2G voice mic not working

    Has anyone come across iPhone 2G voice mic not working (not being heard by the other person) but works fine on speaker phone and bluetooth headset. It has been working fine so far and suddenly developed this problem! Any help is highly appreciated….

    I had that problem with my iPhone 3G after about 5 days.
    I just had Apple take a look at it.
    They cleaned it out, called it and stuff.
    Didn't work.
    Since I didn't drop it in water and it was not my fault in any way, they gave me a brand new one.

  • IPad 2 3G 64 mic not working from factory, do you have any idea ?

    Hi
    I have iPad 2 3G 64 , it  works prefect but when I use cam for record video there is problem in mic . Mic not working so no sound in video .
    I try to use any app from apple store to test mic but still not work also I try to update the device to 4.3.3 when I finish from update again same problem with mic, I used this iPad for one month
    I think this problem from hardware not from software .
    Please tell me what i have to do with this problem .  

    Hi
    I have iPad 2 3G 64 , it  works prefect but when I use cam for record video there is problem in mic . Mic not working so no sound in video .
    I try to use any app from apple store to test mic but still not work also I try to update the device to 4.3.3 when I finish from update again same problem with mic, I used this iPad for one month
    I think this problem from hardware not from software .
    Please tell me what i have to do with this problem .  

  • Both internal and USB mics not working

    Hi there, all. Long-time lurker, first-time poster. Starting last night, I have been having issues with microphone use on my iBook G4. Neither the internal mic nor my USB headset mic (Altec Lansing AHS302USB) are accepting input.
    The internal mic's failure doesn't surprise me, as I have heard about the delicate nature of the wire connecting the internal mic from its position on the display down to the main computer. It's the USB mic that confuses me, since USB mics are what everyone seems to recommend that people use when the internal mic is on the fritz (thanks to other mics not working with Mac due to the line-in thing). Also there is the fact that I have used this headset with this computer for over a year with no significant issues until now, with both mics simultaneously failing.
    There doesn't seem to be a problem with the headset's wires; I am still able to hear audio through the headphones quite well, and when I load my audio recording program (Audio In) and Sound Preferences, I can see the occasional blip of sound recognition when I move the USB adapter portion around in the port. These blips even occur when the pink microphone jack and headphones jack are unplugged from the adapter, so this suggests to me that the problem lies not with the wires, but somewhere in the USB adapter, port, or the computer itself.
    I'm leaning toward the computer itself, since it just seems odd that both mics would just happen to stop working at the same time. That and the fact that audio output still works through the headset, and the USB ports work fine for other USB devices such as my external drive and iPod.
    I have tried restarting, resetting the PRAM, and repairing permissions with Disk Utility. Nothing's working so far.
    Does anyone have any idea what could possibly be wrong?
    For reference's sake, I took a recording of the sound that results from jiggling the USB headset adapter in the port. It's very quiet, so you may need to turn up the volume a little bit to hear it. Again, these are the ONLY sounds that the mic is able to pick up currently.
    http://animeutahime.com/temp/faultymicrecording.mp3
    iBook G4 Mac OS X (10.4.10) 768 MB RAM, 37.7 GB hard disk

    Just to chime in here - I wonder if it's down to the software: I've recently updated to 10.4.10, and the internal mic seems to have stopped working.
    One positive effect of the change to 10.4.10 is that my Griffin iMic no longer flips to 8-bit, 22khz recording when I plug it in.
    Having said that, I really like to get my internal mic back up and running again.
    iBook   Mac OS X (10.4.10)   1.5gb RAM, 60gb hard disk

  • Ipod mic not working

    My Ipod 5th Gen mic not working

    - Make sure the mic hole is clear and unobstructed. It is the little hole on the back by the camera lens(if has back camera). For the 16 GB one without the back camera the mic hole is on the top edge near the center.
      - Open the Voice Memos app and see if you see movement on the VU meter needle with changes in noise level trying to be recorded
    - Reset the iOS device. Nothing will be lost       
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                                
    iOS: How to back up                                                                                     
    - Restore to factory settings/new iOS device.             
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar                                      

  • Built in Mic not working on Imac Windows 7 boot camp

    I've been doing research and a lot of people seem to have problems with macbook pros mics not working for vista or XP. My current problem is on an Imac running Windows 7 32bit boot camp. The built in mic REFUSES to work be recognized or show any signs of picking up sounds. It won't work in Sound Recorder, Ventrillo or any program. Any help is appreciated if you need any more info let me know. Yes my mac is fully updated with both windows updates and mac updates.
    -Nick.
    Edit: I'm running an Imac Version 10.6.6 intel core 2 duo, 2.4GHz

    Same Here... is there any solution? i have 64 bit windows 7 and still the same problem.. external mics don't work either!

  • Internal mic not working after updating to 10.10.1

    After updating to 10.10.1 (from 10.10) on my MacBook pro 2010 (15” screen) the internal mic is not working when using FaceTime (or Skype) and so the person on the other end of the video/audio call is unable to hear me. On my end there is a static/crackly sound during FaceTime (or Skype) connecting  since the update which I believe is related to the mic problem (no sound input on Mac during FaceTime/Skype).
    HELP!!!

    I had exactly this same issue and and this workaround from Paul on another thread (Internal Mic not working for phone calls in Yosemite ) solved it :
    Make sure FaceTime App is not running
    Open Terminal
    type sudo killall coreaudiod
    Press Return
    Enter your computer's admin PW

  • Iphone4 - MIC not working only on phone call, But in recording MIC works good

    My iPhone4 was working last 10 months till last week. it is bought from outside UAE and am Living in UAE
    When I make a call  , I can hear them clearly , but other side cant hear me.
    I think iphone MIC is broken, but fortunately I tried recording for 10 minutes, it is working perfectly. I felt hardware working properly
    Then I think it is software Issuebut,
    When I detected the issue software version was 4.3.3, And Then I updated software to 4.3.4. Still the issue remains.
    I tried several time restarting. No advantage
    After all I deleted all my content by resetting from phone and iTunes, bothways.
    Now my phone content looks like new iPhone and software is 4.3.4 and
    Still the MIC not working only on a phone call
    Unbelievable.
    I went to more than 3 apple dealers in Dubai, like istore,protech.. All they refused service for iPhone.
    They dont have service for iPhone, but they selling and are autherized reseller,
    My phone still under warranty.
    Do I get warrenty covering, or atleast it is serviced?
    Or could you have any trick to get it worked
    Trust you can help me.
    Thanks in Advance
    Nouf, Dubai

    I've been having the exact same problem! I tried restoring, updating, suing earphones but NOTHING.

  • Blue ray disc not working in HP laptop

    Hi,
    I recently bought a HP laptop with HD and Blue ray.
    It was working fine till last month.
    I bought a new LCD TV and i tired to connect it with my laptop.
    And i tried to play my blue ray disc.
    It was not working.I don know wat the problem could be.
    Please anyone help me..
    Iam stuck up with this thing.
    I tried the following things:
    1. I updated the Media smart stuff..
    2. I reinstalled and installed the Media smart itself.
    But still the system says " please insert disc"
    It cant read the disc.but when i played normal DVD's its working fine.
    Only blue ray its not working.
    So please some one help me
    Thanks,
    DJ

    Since this is a desktop computer, I would recommend posting this in the desktop forums for better coverage since this is the notebook forums.
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • System internal MIC not working in Hp Pavillion dv1000(model: dv1662ea)

    Hi, When i connect to internet, internal MIC not working when i go to the voice chatting . Please provide me a solution. My model # is HP Pavilion DV1000 Notebook PC Model: dv1662ea, O/S: WinXP SP2 
    Thx. .
    Vam

    i experiencing the same problem.. how did you resolved it?

  • X220 Internal Mic not working

    I had just get a new X220 in recent days.
    And I found the internal mic not working, I can not record any sound through Sound Record or Skype.
    I had tried all the following methods, but the mic still can not working. Anyone cound give me some suggestion ?
    1) update sound card driver to 8.32.23.2
    2) Fn+F6,  change between "only my voice" or "Multiple voice"
    4) UnInstall source card driver and use microsoft generic driver
    3) The method in http://forums.lenovo.com/t5/T400-T500-and-newer-T-series/T420-internal-mic-problem/td-p/435551/page/..., operate like :
       Start -> control Panel -> Sound
    Click on the "Recording" tab
    Click Internal Microphone to highlight it
    Click Properties
    Click the "Advanced" tab
    Uncheck "Enable audio enhancements"
    Finally, click the "Levels" tab and turn Microphone Boost to 0dB. (if you don't do this the noise will be even louder than before).
    Click apply.

    hey kitewind,
    welcome to the forums and since you have tested the microphone using microsoft generic drivers and i'm guessing it did not work; therefore the best action for you right now is to contact our tech support group via
    http://bit.ly/LNVsuppNum
    WW Social Media
    Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    Follow @LenovoForums on Twitter!
    Have you checked out the Community Knowledgebase yet?!
    How to send a private message? --> Check out this article.

  • EMU 0404 - audio technica ADG1 mic not working

    Have a E-MU 0404, Windows 7 64 bit. Headphones and audio outs working fine. Need help with mic issue. Mic not working with this headset or my other ones. Mic input ports working, as I tested with a traditional mic with phantom power on. The headset mics do work, tested them with computer inputs.
    Also bought and tried a mic preamp with no luck when plugging in the headset mic.
    Why won't the 0404 pick up my gaming headphone mics, and what can I do to fix this?
    Thank you in advance.

    jonathanwesley wrote:
    I'm really interested to know what settings i should have in the ASIO full duplex program
    it has
    INPUT
    X Asio Driver
    X Emu
    OUTPUT
    X Asio Driver
    X Emu
    the order is an issue, and whether or not they should be checked..
    Hmm... you shouln't use those ASIO drivers which are installed by Cubase installer (ASIO MME / ASIO DirectX).
    Since I don't know the version of Cubase you're using (a bit different device setup system in each version), I can only suggest you to select the "ASIO E-MU 0x0x | USB" driver (device setup) and then set up the I/Os and MIDI ports. You'll find information on how to do it by reading bundled Cubase guides (paper or PDF) ... if you don't have these guides, you'll get all downloaded from Steinberg's site:
    ftp://www.steinberg.net/Download/
    jutapa

  • Mic Not Working... Audition CS5.5 crashes when I hit Record

    I'm doing simple recording of narratives for my animated videos.  Seems simple enough.  I have CS5 and Soundbooth on my Mac PowerBook Pro with Snow Leopard OS X and 4 Gigs of RAM.  My microphone is a Blue Snowball Mic with a USB plug. I do not have a special audio card.  All I have is CoreAudio.  I've previously recorded and edited multiple narrations in Soundbooth with no problem. 
    My horror story started a couple weeks ago when Soundbooth stopped recognizing my Snowball Mic.  I tried everything I could think of and nothing worked. Then I realized that Adobe had stopped supporting Soundbooth and switched to a totally rewritten Audition in CS5.5.  Based on that nasty bit of info, I bit the bullet and spent the nearly $600 to upgrade my CS5 Master Collection to CS5.5. I uninstalled CS5 and installed CS5.5.  Now, the Snowball is recognized in both my Mac Preferences and in Audition Prefrences.  Unfortunately, when I tried to actually record, NOTHING HAPPENED... and then something did happen... Audition CRASHED.  Now, whether I try to use Snowball or just the built-in mic, as soon as I hit the record button, Audition crashes. I rebooted my Mac... and Audition continues to CRASH.
    If I've suddenly developed another fatal glitch in my own personal self, I wouldn't be surprised.  Or is it the microphone and its USB connection?  Or some incompatibility with my Mac?  I've been working with After Effects CS5.5 and Illustrator CS5.5 with NO PROBLEMS, so I'm thinking the uninstall/install went ok.
    Hoping to be embarrassed when told of my stupid mistake and the easy, inexpensive fix.
    Best to All of You,
    RoadQuill

    Hmm, I tried re-sending and I received a rejection from your mail server insisting the address was invalid.  I'll paste my response below in case anyone else finds this thread and is experiencing the same issue:
    I'm sorry you're having troubles with your audio devices.  I use a
    Snowball myself for much of my testing, so I know we can get this working
    for you.
    My first question would be whether you updated OS X around the time you
    noticed this problem begin.  There was an issue with a few releases of
    10.6.x where Apple changed how they identify audio devices to
    applications, and this could often cause confusion to apps that had a
    record of the old Ids.  Please try the following steps:
    1.  Open Finder and navigate to /Library/Preferences     (This is the
    system Library folder, not the one in your Users folder)
    2.  Rename "com.apple.audio.AggregageDevices.plist" to anything else (eg.
    "com.apple.audio.AggregateDevices.BAK" )
    3.  Launch Audition
    If the OS update was indeed the problem, this should resolve the issue by
    forcing OS X to update this property file and trigger Audition to use the
    new device Ids.  It should not negatively impact your system otherwise as
    OS X simply rebuilds the file and updates the timestamp.
    If this doesn't help, let's get Audition "reset" and configured properly.
    1. Launch Audition, but hold down the SHIFT key while it's loading.  (This
    overrides Audition's preferences file and sets it back to its default
    settings.)
    2. Open Preferences > Audio Hardware... And set your Default Input: to the
    Blue Snowball.
    3. You'll likely want to leave your Default Output configured as-is, but
    verify it is configured for your expected output.
    4. Click OK and attempt to record.

  • Blue Snowflake Mic WONT WORK!!!

    I have a MAC OS X 10.5.4 and I just got it last week. I bought Logic Express to do some recording. I know the computer comes with a built in mic but I wanted a semi good mic. So Logic Express 8 doesn't read the Blue Snowflake mics. I have read one blog about fixing this problem its just that the person that posted it was not very thorough. Can someone help me with a step by step solution so I can use this microphone to record and be able to change back to the built-in microphone when I am on Skype. My built-in microphone works as a charm. Just the microphone I paid money for doesn't and no one seems to have a concise was of explaining how to fix it. Thank you!

    Make sure you plug the microphone into the mic jack on your sound card.
    Depending on what audio card you have, you will need to set the recording source to microphone in the audio settings. (Start, Programs, Accessories, Entertainment, Volume Control, Options, Properties, Select Recording Source.) You might also selecting Mic Boost if there is an option.
    Once the Mic is selected as the recording source, change back to playback (Volume Control, Options, Properties, Playback Control) and for now, make sure the microphone setting is not muted. Once that is done, try talking into the microphone to see if you can hear yourself over your speakers. If you can, then it's all set. If not, contact the company who makes your Sound card and verify the settings for enabling your microphone and specifically, what types of microphone and what range will work best (ex 600 ohmz)

  • Live! Cam Voice (mic not working)

    Just bought Live! Cam Voice yesterday. Mic still not working properly even after verifying the installation. Please advise how to rectify.
    Thanks,

    Hi,
    Is there any chance you could upload the drivers from the cd for me please because creative dont currently support the camera.
    I can give it a trial run on my windows xp and give you some feed back after.
    Thanks,
    Rav

Maybe you are looking for

  • Can we return a Array of varchar2 from a function ?

    Hello, i have a sql query that returns some rows. I want to define that query inside a function and want to retrieve the results in an array .Finally i want to retrieve those values in array in my .NET runtime . How can i achieve this ?

  • Operation mappings with multiple mapping programs

    Hello all, I have 2 message mappings: <source structure> -> <middle structure> <middle structure> -> <IDOC I don't know how to build service interface and operation mapping. Thanks, Natalia.

  • Java.lang.UnsatisfiedLinkError: registerNatives

    Please help me in fixing this problem.i'm using WSAD 5.0 to run my j2ee application and an applet in the client environmment is giving the following exception: &&&&&& TEMPLATE &&&&&& eAuthorisationbefore conjavax.naming.NamingException: Failed to ini

  • Unplanned services from contract

    Folks, Does anyone know how exactly the unplanned services from contract works? What masterdata needs to be in the contract and how and where in the process do we use the contract limit?

  • Automatic Serial no

    one requirement  in my business scenario  like  some material we have batch with serial no  so we assigned serial no profile in  plant level data  my  query is  when i do  goods receipt against purchase order if i select the checkbox create serial no