Blue LED Lighting showing up as purple

Using a Canon 60D and having some issues taking photosgraphs that use intense blue LED lighting and showing up as purple instead of blue
Below is an example of  a set I am trying to shoot but the blue is turning out purple.
I have tried all the different color balance settings which will affect white causing it to be a cool white and all the way to warm white but the blue uplighting remains purple.
What I also found interesting is that I took some shots with my iphone and the blue comes out correctly.
Anybody know how I can fix the problem or is this a limit with the sensor on the 60D? Would a higher end Canon camera fix this?

The camera display is a jpg that has the white balance and camera style settings applied, even if you're shooting in raw.
Also, when you go back, if you have another lens try a photo with that, even if it's a different focal length.  I'm guessing it's probably a combo of white balance, over-exposure color shift, purple fringing CA, and maybe some camera settings tossed in for good measure.  I'm sure I'll be around there this weekend, I'll drag a camera around for grins.

Similar Messages

  • HP laptop G62 Blue led light blinking on the caps lock button

    When booting up get a black screen. The Caps Lock blue led light is blinking once.
     1: Tried a hard reset Removed battery, held down the power button for 15 seconds and tried again no luck.
     2: Air cleaned the power vents around the fan same again no boot.
     3:  Founf the LED code chart for the blinks mine appears to blink once and a pause then blink again
          the blink code chart say  CPU Not Functional.
     Does this mean the systemboard / motherboard is bad / fried
    Thanks
    Emmersond

    Dear Customer,
    Welcome and Thank you for posting your query on HP Support Forum
    It looks like your Notebook has a blinking/flashing CAPSLOCK light and a blank screen all the time
    Whenever the Capslock LED Blinks once that means CPU not functional and we need to replace the Processor
    However, I would request with you to perform the below shown step before contacting HP
    Step 01. Turn OFF the Notebook
    Step 02. Un-plug the Power/AC Adapter and also remove the battery too
    Step 03. Press and Hold the Power Button on the Notebook for a full minute
    Step 04. Test your Notebook with Battery and Power Adapter alone
    Note: If you are still facing the same issue try to remove and reseat the Memory Modules of your Notebook
    Hope this helps, for any further queries reply to the post and feel free to join us again
     **Click the KUDOS star on left to say Thanks**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem
    Thank You,
    K N R K
    Although I am an HP employee, I am speaking for myself and not for HP

  • IPhone won't turn on and a blue LED light before

    When I picked up my iPhone to use it this strange LED light came on whenever you have flashlight on or camera flash on. All of a sudden it turned off and then I plugged it in and it acted like it needed to be charged and then it turned on. While the LED light is still on. I closed out flashlight and went to the camera app. When I opened up the camera app even though the flash was set to off the LED light went off. Then it showed the warning sign that my iPhone was overheating. It later shut off and my dad told me to hold the power button down for 10 seconds and then something was suppose to pop up I guess? I don't exactly remember what he said. But now the apple screen shows up for a few seconds and then it shuts down for another few seconds. I don't know what to do because it won't even turn on so I can restore it. HELP!!!

    Have you tried to charge the phone? Plug it into a charger and leave it there for 30 minutes.
    Then try to turn it on again and see if that works.
    If the light was left on too long I "guess" it could cause the phone to get hot but probably more for a rapid discharge of the battery.
    Let me know how you make out.
    Fred

  • TX2517ca, wont Boot - Blinking blue LED lights - Num Lock & Caps Lock

    notebook just decided NOT to boot one day..I can hear the fan and very minimal HDD activity. I've tried the Hard reset as directed by HP and removed the battery etc...  the lights blink exactly the same time, stay on for 1 sec, and the off for 3 seconds and then blink simultaneously again, and doesn't stop till I pull the power, there is no clicking, grinding, beeping nothing, nothing on the screen at all. The rest of the lighted buttons are solid blue.
    FYI, I am a computer technician of 15 years...home based at this time. so I have pulled the memory, cleaned them, 2 (1GB & 2Gb), compress air dried them and blue out the slots and reseated even by doing only 1 at a time, no change, same end result, blinking LED's. So I just pulled the Hard drive, connected it to another machine as an external HDD, it works fine, I can see the C drive and the Recovery drive without any problems. so at this point I have just pulled the battery from the board and will leave for a while to see if we can drain the BIOS/CMOS (wondering if software is stuck in hibernate or sleep and when powering on is only returning to similiar state, but wouldn't account for no screen display...) everything so far is pointing to CPU I would think. Next after replacing existing Hard drive and try booting if that doesn't work, I have a working blank Hard drive I can insert to try for the hell of it...stay tuned...
    Oh, also system is immaculate, no collected hair or dust in fan ports etc..
    This question was solved.
    View Solution.

    Hi,
    Check the link below:
    Blank Screen LED Error Codes
    ** Say thanks by clicking the "Thumb up" icon which is on the left. **
    ** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

  • Monitor f1503 - blue led power light not showing power available. unable to turn on

    Hi ,
    I have had my f1503 monitor in storage for a while and it was working at last usage. Connected all power and PC connections correctly and turned the power on but no blue led light working and unable to turn on the monitor. Checked the power adaptor - green led lit on power transformer and 12.33 volts were showing at the output end of the monitor power plug.  The monitor power plug was inserted into the correct socket. Please help?
    Does the monitor have a fuse that may have blown? 
    This question was solved.
    View Solution.

    Hello Bruce123456,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I understand that you are having issues where your HP Pavilion f1503 Flat Panel Monitor is not coming on. The issue you are describing appears to be a physical issue and I think it would be best if you contact HP Technical Support for repair options.
    I would like to thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

  • Playbook will not charge, no red LED light

    The Battery charge said 3%. I turned off the playbook and plugged it in and left it to charge with the LED lights  showing. I went to retrieve it, only to find out it's not turning on. No red light appeared. nothing. I went and  plugged it in and then tried turning it on  Nothing.No red light...just dead.  PS: I just got the Playbook from relative without the manual and all so i'm not sure about the DO's and DON"T's of using the tablet.  Please help!!!  Thanks in Advance. 

    Your battery is dead. http://www.blackberry.com/btsc/KB27705
    Try this:
    Connect the charger that came with the PlayBook and plug it into the wall. Hold down the Power Button only for 20 seconds. Leave it for 4 minutes, then unplug at the wall, wait a minute, plug it back in again, hold down the Power Button only for 20 seconds.
    Repeat this process about 10 times and hopefully, your PlayBook should go into a high charging rate. Leave it plugged in overnight and you should have a full charge by morning.
    1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
    2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

  • Front 'notification' LED light not working...

    anyone else having this problem?  since the 2.2 update my blue LED lights on front of the phone stopped working (it lights up when u have a call)  i liked having the visual notification when a call was coming in....i get the blinking green light...but not blue or red (charged phone)....anyone?

    i tried a starting the phone on safe mode (to see if it was an app that was causing the problem), then factory reset and pulled the battery,. ETC, ETC (I HATE THE FACTORY RESET SOLUTION, ITS ANNOYING!!) ..
    FURTHERMORE, recieved a replacement unit (shutter problems) it was preloaded with 2.1...everything worked fine...i proceeded to update to 2.2, the light went out.  I spoke with a tech support guy from verizon...he told me it is a know problem and that not everyone is expericing this. similar to what people are experiencing with their mp3s...some have the problems others dont.  im glad that this is the only issue so far...but ido want all the bells and whistles on my phone...and i want them to work!!  not asking for much...i want what i paid for...little blue light and all...
    PS-i like my phone. 

  • Red LED Light Remains On

    The battery is fully charged and disconnected from charger.  When hibernating, the red LED light constantly remains on.  When the phone is being used, the red LED light does not appear.
    What is wrong? How can this be fixed?  Thanks much for help.

    I'm a total newbie to smartphones.  Based on your question, I cleared all the Notifications and the red LED disappeared.  Then sent myself an email to test the blue LED light and it is now blinking.  So, the problem might be solved but don;t know why the red LED constantly displayed after charging the battering to 100%.  
    Don't know about Lightflow!
    Thanks

  • Satellite P100-347: Blue Leds - Can they be disabled/switched off?

    I have read several topics in the forum about the P100 Harman/Kardon Speaker Blue LEDs/lights. None have expressed a final answer about how to switch off the LEDs.
    I was wondering if any new update on this issue has occured. The last forum post about it was in February. Is it possible to switch off these annoying lights in the newer Satellite models? I would be willing to disconnect the leads if its an easy job.
    My laptop is the Satellite P100-347 (SPA6E)
    Thanks a lot

    Hi Dan
    Did you use the forum Advanced search???
    I dont think so!!!
    I used it and found several threads about this theme.
    I searched in the Satellite P section for blue light and find these postings:
    http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=16008&messageID=58569
    http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=19701&messageID=72256
    So why to post something which was already discussed here in the forum?!

  • HT3964 My Macbook air charges intermittently. At times when I connect the power adapter it shows that power is coming in but  says "not charging" and the led light on the power adapter does not light. At other times it charges normally. Any ideas?

    Hey guys,
    I am having problems with charging my mac Air.  Sometimes it charges perfectly but then at times much as it shows that it's getting the power from the charger, it says "not charging" and the led light on the charger does not light up. Any help?
    Rgds,
    Kido-Vj

    That can happen when you are Taxing the system. No Apple supplied AC adapter supplies enough power to both power the system and charge the battery at the same time when the system is under Heavy Load, when you are Taxing the system heavily. At those times it will draw power from both the AC adapter and the battery at the same time. So if it is drawing power from both it can't charge the battery while it is drawing power from it.

  • The blue LED power button light has gone out

    The blue LED power button light has gone out.    Model a4316f.   How do I replace?

    Hello @deargle,
    Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More.
    I have read your post on how the power button LED on your desktop computer has gone out, and I would be happy to guide you towards a resolution!
    Since there are no available replacement options on HP Parts Surfer for replacing the LED light, I recommend contacting our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
    I hope this helps!
    Regards
    MechPilot
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

  • Show popup window with LED lights using SALV(factory method)

    Hello Experts,
    I need to add a button that when the user clicks it, a popup window will appear
    showing the meanings(legends) of the LED lights in my report. How do I do this guys?
    Thanks you and take care!

    Please check the program SALV_TEST_TABLE_COLUMNS and
    after setting up the values for ICON and showi it as in a popup  by
      data: gr_table  type ref to cl_salv_table.
        gr_table->set_screen_popup(
          start_column = 1
          end_column   = 110
          start_line   = 1
          end_line     = 20 ).
        gr_table->display( ).
    a®

  • Camera and led light not working after IOS 7 update on iphone 5 help please!!

    After I installed the update my led light won't work for the flashlight and my camera doesn't work either. Only the front facing camera works. Any suggestions?

    thanks for the suggestions, i tried the ideas you suggested but i dont even get a camera showing for the rear camera, i also noticed the torchlight no longer works.  i did all the steps but no luck.
    So I took my camera to the genius bar this weekend as well as walking through various steps with the apple guys in ohio support over the net. 
    With the guys at the genius bar, after i insisted that it must be software as the rear camera stopped working only after the softwre update, they continued to assure me it was hardware and talked me into letting them replace the camera,  they then took it to the back and tried fixing a camera and 30 minutes later came out and said the rear camera is no longer being detected and wanted me to replace the motherboard for yet more money.  im glad they didnt charge me for the new camera though as it still didnt work.
    anyway the motherboard idea i rejected as it was just 2 months out of warranty and had only stopped working the day after the release of 7.0.2, so im going to wait until the next few releases to see what happens, as i dont believe for a second its hardware.  i expected a stock answer from apple and its exactly what i got even after my explanation of how it was working the day before the release.  not overly impressed with the whole process.
    i wanted to back down to 7.0.1 to confirm the camera still works but they said no chance so i cant even see if it still works ouside 7.0.2.  anyway will update if i get any further progress.

  • My MacBook Pro retina 2013 won't charge. I've checked all connections which are all ok. Little red light shows on magnetic plug, instead of usual green.

    My MacBook Pro retina 2013 won't charge. I've checked all connections which are all ok. Little red light shows on magnetic plug, instead of usual green.

    If you are seeing a Red LED, you may have a faulty MagSafe Adapter.
    I remember reading that the orange light is produced by a combination of a Red and Green LED. If that's the case, It seems that the adapter isn't lighting the green LED properly at that time.
    I would suggest you seek service with your nearest Genius Bar (Apple Retail Store) or Apple Authorised Service Provider as they have access to diagnostics which may assist in isolating any hardware issues you may be experiencing.
    Cheers.

  • Shuffle light shows red when it should show green.

    Shuffle light shows red when it should show green. For example, when it's fully charged, the light shows red instead of showing green. When you play a song, the light blink in red too.

    Are you sure the 2nd gen shuffle you have is a REAL Apple shuffle and NOT a
    FAKE?
    LED colors and functions are an indication it a FAKE...

Maybe you are looking for