Blue Loading Screen

No matter what I set my Application colors too I always get
this momentary loading screen with the default blue background.
Anyone else have this problem? Anyone with a fix? I'm sure it's got
to be something simple.

Its a setting in the HTML.
I posted about it here:
http://renaun.com/blog/2006/07/22/69/

Similar Messages

HELP! CD stuck in drive. Try to restart brings up blue loading screen. Can't get the disc out and we've tried everything!

Imac Intel totally stuck with this CD in the drive,
Seriously. Every forum tells us to restart - but we can't because SOMEHOW this burned music CD (that we've had forever) has caused it to freeze on a never-ending blue loading screen.
Help please. Nothing's working. Only every now and then will the drive make some sounds to eject and then fails.
What has happened??

Greetings Ruth,
It sounds like the disk has become stuck in the drive and when it attempts to eject it becomes stuck on the inside of the drive housing or the optical drive itself has failed in some fashion.
Follow all the steps under "The drive doesn't eject discs or discs eject slowly".
If the steps don't help then follow the last step which is to take the system in for service / evaluation.
Best of luck to you.

HT3964 My iMac gets stuck on blue loading screen after it starts up.. Reset smc and pram?

My 2009 iMac on OS X leapard will start up but gets stuck on the blue loading screen. Ive been instructed to reset the smc and pram but can't figure it out nor find it online in a simple way. Can someone please assist? Again: it fires up but gets stuck on blue loading screen..Thank you!

Reset SMC:
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on the computer.
Reset PRAM:
Shut down the computer.
Locate the following keys on the keyboard: Command, Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys. You must press this key combination before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.

Blue loading screen issue

I've just gotten past the issue with installing Skype and now I can't get passed the blue loading screen i've already tried the cmd fix can anyone help? Also is it doing this because i downloaded it with chrome?

Please, make the test showing if your Internet Explorer can execute JavaScript.
Open in your Internet Explorer this page and watch the response:
http://javatester.org/javascript.html

Z10 Screen goes blank, when restarted now rotates between blackberry screen and blue loading screen

Last week I was having issues with my blackberry where the screen was going blank and I had to restart the phone. I had recently installed a software update and so when I took it into Telus the guy explained that the sotware may not hae installed correctly so he walked me through the blackberry restore steps via blakcberry link. So I did restore my blackberry.
But a couple days later, it's back to its old tricks - the screen just goes black and I have to restart it. The trouble it is won't currently restart. At the moment it is rotating between the black and white "Blackberry" screen and the blue loading screen.
Was I unlucky enough to have the software install incorrectly both times, or is there something else going on?

ctyers wrote:
Last week I was having issues with my blackberry where the screen was going blank and I had to restart the phone. I had recently installed a software update and so when I took it into Telus the guy explained that the sotware may not hae installed correctly so he walked me through the blackberry restore steps via blakcberry link. So I did restore my blackberry.
But a couple days later, it's back to its old tricks - the screen just goes black and I have to restart it. The trouble it is won't currently restart. At the moment it is rotating between the black and white "Blackberry" screen and the blue loading screen.
Was I unlucky enough to have the software install incorrectly both times, or is there something else going on?
Blue loading screen? That is hardly known to be a "loading screen".... does the device get out of the blue screen by itself or you have to intervene?

Skype stuck on blue loading screen

Yesterday when i opened my pc, and opened skype it would just get stuck in the blue intro screen. I have the toolbar on the top, and as far as i know I have the latest version downloaded. Im using windows 7. I have tried restarting both my computer and skype with no sucsess. Please help me. I have also tried a lot of tips suggested on this very forum.
Solved!
Go to Solution.

Try this:
Go to Windows Start -> All Programs -> Accessories -> Right click on Command Prompt, select 'Run as administrator'.
In the Command Prompt type: cd c:\windows\syswow64 and press Enter.
Next type this and then press Enter:
regsvr32 jscript.dll
Next type this and press Enter:
regsvr32 jscript9.dll
After each Enter you should receive a message saying that DllRegisterServer in XXX.dll succeeded.
Reboot your computer.
Make now the test showing if your Internet Explorer can execute JavaScript.
Open in your Internet Explorer this page and watch the response:
http://javatester.org/javascript.html

Laptop stuck on blue loading screen!

hi folks!
i am in serious need of HELP! any advice wud be appreciated!
I updated the software on my laptop to 10.4.9 about 3-4 days ago and it worked fine, however 2 days later my laptop crashes and then when i go to start it up again
it doesnt stop loading up -as normal it would start to load with the white screen and spinning dial, which then turns to the blue screen with dial but then it stays like this!
Ive tried attaching firewire to another mac and then using disk utillity to repair the hd, which ends with the report 2 volumes checked, 1 hdfs repaired, 1 hd cannot be repaired, so i then tried resetting the pmu, which also did nothing but reset the date and time.
Now after reading a few things on the forums ive also tried going into single user, which has not done much to the computer that i can tell to help...im really stuck peoples! save me!

My powerbook g4 was doing the exact same thing as yours for 2 days. After running the disk utility, resetting PRAM and PMU and running a hardware test with no results, I finally called Apple tech support tonight.
My computer is fixed now. The Apple tech walked me through the necessary steps in this order:
1. Reset PRAM
2. Reset PMU
3. Insert your newest OSX version installation DVD.
4. Reboot computer while holding the Option key. A screen will load with your hardrive icon and the installation DVD icon. Select the installation icon.
5. Here you will select the Disk Utility option from the menu at the top. Select your harddrive on the left and run the First Aid disk check. Let finish running.
6. Now you will reboot again while the installation DVD is still in. This time hold the "C" key while your computer boots.
7. Finally, follow the steps in this link to Archive and Install http://www.info.apple.com/kbnum/n107120
Again, this worked perfectly for my computer without any loss of data. I hope this helps you out. Good luck.
powerbook g4 Mac OS X (10.4)

IOS PS Touch stuck on load screen.

I tried to save a small project (1 layer, 3 filters) and it's now stuck on the blue loading screen with the PS Touch logo. I've deleted the app & re-downloaded it, but it's made no difference. Any ideas ? Thanks

Could you try to retrieve your PSTouch project files with this tool...
http://www.macroplant.com/iexplorer/
See the attached image. I marked the PS Touch files with a red rectangle.
Try to reboot PS Touch afterwards. If you still see this issue possibly a re-install would help.
You can restore your PSTouch files with the same tool or just add them to the https://creative.adobe.com
and download from there.
Hope that helps.
-Guido

Ibook G4 freezes either when its on the grey loading screen or the blue screen. Sometimes I get it to my desktop but it always freezes in like a minute. Someone help I really need this computer!

I have tried everything online and my iBook g4 wont stop freezing. Safe Mode doesnt even help, it still gets stuck on the blue screen! It either gets stuck on the grey loading screen or the blue screen. Rarely I am able to boot past everything and get to my desktop but after about 30 seconds it freezes again. This laptop was passed down to me and I have no original papers or disks that came with this laptop. I am really trying to figure this out without buying a disk because if it doesnt work I wont be out $60. Someone help I have tried putting it in safe mode single mode holding c down during start up! I need more options.. Please this is the only computer I have right now! (PS: I know warranty has expired a long long time ago)

Hello,
Some information you may or may not have read.
Troubleshooting portables that won't turn on or start up
http://support.apple.com/kb/TA25686?viewlocale=en_US
Troubleshooting: My computer won't turn on
http://support.apple.com/kb/TS1367
Without the disk you are limited on options. It could be an issue with the hard drive and would required the disk to run disk utility.

After installing Reader 11.0.07 update on my Mac OS X 10.8.5, when I open an Adobe pdf file I see Chinese script next to the blue loading bar at the bottom of the screen. This never appeared before and I am concerned that my computer is being hacked into

After installing Reader 11.0.07 update on my iMac OS X, v.10.8.5, when I open an Adobe pdf file I see Chinese script next to the blue loading bar at the bottom of the screen. This never appeared before when downloading pdf files and I am worried that my computer is being hacked into or I acquired a virus. Is this normal or do I have to uninstall this update?

After installing Reader 11.0.07 update on my iMac OS X, v.10.8.5, when I open an Adobe pdf file I see Chinese script next to the blue loading bar at the bottom of the screen. This never appeared before when downloading pdf files and I am worried that my computer is being hacked into or I acquired a virus. Is this normal or do I have to uninstall this update?

Custom Loading screen for blu-ray

I'm fairly new to this so my experience level is low. However, I have no problem creating my own static menus and burning great quality Blu-Ray disks. I'm just now learning how to create active menu content and would like to implement the custom "loading..." screens that I see on many Blu-Ray movies. So, what is the proper way of implementing such a feature using the toolset available with Adobe Production Premium CS5.5? What is the correct terminology for this screen? Are there any free tutorials on YouTube describing this? Is this simply a flash menu load screen?
Thanks,
Tony

The lack of response actually indicates that none of us know.

Windows XP, will not load past blue error screen

Hi, been wondering for a while if anyone can help me...
My xp system will not load past the blue error screen which appears after the computer has shut down suddenly or improperly.
Regardless of what actions you choose to take (safe mode, most recent settings...etc) the system simply goes past the blue screen, onto the windows logo loading page, where the loading bar moves for around 10 seconds, before returning back to the blue loading page.
So far I have tried leaving the computer for as long as a month unused whilst I was abroad, removing the battery for various amounts of time, and leaving the computer running for as long as a day.
In the absence of a recovery disk, I have no idea how to get it back to form, and would welcome any hints or suggests, bearing in mind I am no computing genius (If you had'nt guessed). Preferably, without loosing my irreplacable pictures and videos stored on the hard drive, however that is only preferably,
Thanks, Jay

Hi Jay,
i know what it's like to not able to boot even into safe mode command prompt.
In your case I would do either of below:
Download a bootable CD ISO called "HDD Regenerator" or [Hiren's BootCD|www.hiren.info/pages/bootcd] which includes many other great tools. Burn the ISO image onto CDR.
1. Use the HDD Regenerator to boot the PC and use it to scan the whole HardDrive from 0, it will scan and fix all the bad sectors which may cause Windows failing to boot as systems files are corrupted. You will be suprise how great this tool can fix bad sector HDs.
2. If above does not work, the the Hiren's BootCD to boot the PC, navigate to Symantec Norton Ghost or Acronis True Image to Clone you hard drive, you can use USB external harddrives.
Then you can rebuild the PC with second partition large enough to store the HardDisk-IMAGE, use Ghost Explorer/etc to restore your personal files.
I have been dealing with lots of this issues as well. Let me know if you need more help.
Good luck!
Patrick

Hi Today I Bought a Brand New iPhone 5s And It Woked Fine For About 3 Hours And Then It Just Shut Itself Down, It Goes To The Apple Logo Then To The Loading Screen For About 15 Minutes And Then It Shows A Blue Screen And Then Repeats Please Help!

I Was Really Excited About My New Phone And Now It Is Just Completely Messed Up. It Shut Itself Down After About 3 Hours Of Use And Now It Just Goes From Apple Boot Logo, To Loading Screen, To Blue Weird Screen, And Then It Goes Back To The Boot Logo. When I Plug It Into My Computer It Recognizes The Phone But It Doesnt Show Up In iTunes 11 PLEASE HELP

Can you do a Reset by holding the Sleep button and the Home button at the same time for about 20 seconds?

Stuck on loading screen

Hi, I recently charged my Blackberry Torch until 100%. After I charged it, I unplugged it and left it for 3-4 hours. When I went back to check on my Blackberry, this weird loading screen pops out. It's not a clock loading, it's blue loading circle. Also, I can still push the Blackberry button to view apps that running but I can't type or click or touch anything on the screen. When I see the apps that running, I see "Blackberry App Advisor" that is currently running but I think stopped responding. Here are some screenshot
As you can see, I can see the running app, but when I choose an app, the loading screen pops up again. I tried to do soft and hard reset, but still the loading screen keeps popping up. Please help me
PS : Please give any answer besides reinstalling OS and Wiping system
Thanks

KevinFe wrote:
Please give any answer besides reinstalling OS and Wiping system
Thanks
I think that's what you're going to be looking at. Resetting your phone with a battery pull should resolve issues such as this. If it doesn't, you're not left with a lot of choice other than an OS reload.
Keep us up to date.
- If my response has helped you, please click "Options" beside my post and mark it as solved. Clicking the "thumbs up" icon near the bottom of my response would also be appreciated.

Blue desktop screen, no screensavers or desktop pix after 10.5.8 update

Immediately after updating to 10.5.8 - using the Combo updater and yes, fixing permissions before and after the update - I was brought to my familiar desktop with the standard issue blue background. I tried accessing the Desktop/Screensaver preference pane via both System Preferences and right-clicking the desktop, but selected desktop pics won't load, and screensavers fail with an error message saying:
Can't load screen saver.
Screen saver “Cosmos” did not load properly. Please select another screen saver.
Error: Can’t load bundle
And yes, I tried all the screensavers...
What gives?

There's no such thing as garbage on the screen. Try to be a little bit more specific. Are you stuck at blue screen?apple and spinning gear?does it load the desktop?You can't expect an accurate answer if your explanation is VAGUE. anyway, follow the steps below as it may fix your "issue" I am not even sure what it is.
1. Boot into safe mode (pressing shift while turning on the machine)wait until you see the Apple with spinning gear. Then let go.
2. Once you have safe boot. Login normally. Download the 10.5.8 combo update
http://support.apple.com/downloads/MacOS_X_10_5_8_ComboUpdate
3. Apply the update once more.
If this fails,
1. Boot to the install disc. Select the language
2. Ignore the welcome screen. Choose utilities on the top
3. Repair disc and permission DO BOTH

Blue Loading Screen

Similar Messages

Maybe you are looking for