Blue print version 1.0

hi to all,
what Blue print version 1.0?
Thanks & Regards
venu

Nothing but a Legal document.
It is a proposal by the Organization to the Client.
Work will start upon reviewing the BP.
Version is nothing but the changes to the Blue Print.
Hope this helps.
RK Ghattamaneni.

Similar Messages

Changing images for print version

Is there a way to change an image for a print version?
My background is dark blue and my image is white, however if
I print this nothing will show because its white on white.
I want to use a different image that is dark blue for the
print version so that you can see it.
Can this be done with CSS?

That'd be nice. But you misplaced a decimal in the amount. It
needs to
move right! 8)
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"DC_Eric" <[email protected]> wrote in message
news:es7659$rhn$[email protected]..
> Based off what you said I came up with another idea.
>
> I set the current image not to display and then in the
div I set a
> background
> image, height, and width
>
> then when you go to print the page the display none is
removed and the
> foreground image shows again which is now the print
version image.
>
> I didn' set any blocks or anything but this seems to
work.
>
> Thanks so much Murray. We should all chip in $0.25 each
time you help one
> of
> us. Then you can retire and just support the forums :)
>

DOCUMENTS ON BUSINESS BLUE PRINT Phase related to BW

Hi
Anybody can send Business Blue Print Documents to me.mail id is : [email protected]
please tell me, best books on SAP BW Web Reporting, SAP BW Extraction, SAP BW Modelling(apart from bw step by step,mastering and certification) and SAP BW BEx Reporting.please mail me at the same mail id mentioned above.For Business blue print preparation, which book is good to refer, please specify the book title and author
at the same time please send the related documents of business blue print.
Thanks in Advance
Shah

Shah ,
You can start with the ASAP methodology , it has some Business Blueprints along with it.
As for books , you have quoted most of the books and you can also look at relevant books in
sap-press.com
there you will find the official SAP books on BW -
but agian they might be expensive
As for Business Blueprint , there is a Book called SAp R/3 Business Blueprint ut that would be for R/3 and does not have BW related Business Blueprints in it but definitely a start...
http://www.amazon.com/gp/product/0135211476/103-1653144-3955852?v=glance&n=283155
this is for Business Process Blueprint , I am not aware of any book on Business Blueprint for BW but you can defintely check out ASAP for BI.
BTW which version of BI / BW you are working on ??
Arun
Message was edited by: Arun Varadarajan
Message was edited by: Arun Varadarajan

Multiple compnay codes--Blue print template

Hi Guys,
I need a Business Blue Print Template with Multiple Company codes,for Reference.Please send the documet to [email protected]
thanks in advance and points will be assigned..
suresh

Hi Suresh,
When you create a G/L account it is possible to fill in the field Alternative account number (see the help).
When you want you can assign this to the countries own chart of account and report on this.
In this case I advise you to use one chart of accounts and use Alternative account number for reporting by country.
Now it is possible to use one controling area. This is use-full when you want to make total reports over the company codes.
In controlling you store document currency, company currency and controlling area currency. It is possible to use paralel currencies.
When you are doing settlement to an other companie code's it will create an inter company posting. But it is possible with the exchange rates that you have results you don't want
Paul
Alternative account number in company code
The alternative account number field in the company code area is freely definable. You could use it to enter:
the account number from your legacy system or
the account number from a country chart of accounts if your corporate group uses a standard chart of accounts.
The alternative account number is only issued in the financial statement if you explicitly assign it to the relevant items in the financial statement version.

Blue Print View in JDeveloper 10.1.3.4

Hi,
whenever I open files in BPEL files in JDeveloper at the moment, I get an extra button top-left called "Blue Print View" and a blank pane below it. I don't know what it does or why it's there, and can't find any documentation on it, or settings/preferences related to it. If I click anything else on that toolbar, the "Blue Print View" button disappears and I see the BPEL view that I'm expecting. This started happening recently, and coincided with me starting to see many problems when I try to close file tabs that I've got open, e.g. I click on the [X] to close a tab and it just won't go away!
I remember attempting to add a BAM Server/BPA Server/Rules Engine in the Connections Navigator (I was just playing, I don't actually have one to connect to), and I wonder if these problems originated at about the same time.
Does anyone know what this "Blue Print View" is all about, and how I can get rid of it?
I am using JDeveloper Studio Edition Version 10.1.3.4.0.4270 under Windows XP SP2.
Cheers,
Paul

Hi Brent,
I don't know how to install exceptions manually. However why don't you try to install a different extension (e.g. junit integration), to see if the problem persists (is it a general problem with your jdeveloper installation / none of the extensions work??). Also try to start up the jdeveloper from the command prompt - are there any exceptions (e.g. IOException) logged on the console upon startup?
The problem might be related to file permissions, jdk version, or 64-bit win7 os (jdeveloper 10g not certified).
Edited by: user647567 on Jun 25, 2011 12:41 PM

Real time blue print + some more

< MODERATOR: Message locked. Please read [this|Before you post: Rules of Engagement; before posting next time. >
hi to all
anybody have real time blue print doc, mock projects to work on & practice, and mock test to Practicing for exam(certification)
thanks buddy

Hi,
1. Who will be responsible for preparing the minutes of meeting? (XI Developer/Team Lead/senior consultant etc)
In general , TL will prepare and rest of all seniors will approved/ signed if it is senior level meeting , Offcourse it depends upon the meeting .
2 In usual Dev->QA->Prod project cycle...
Where would the Configuration and Version Control come into picture?
Who is responsible for configuration process of the developed objects?
How the configuration process would be in real time XI project? Are we needed to use any external configuration/version control tools like VSS etc..?
Yes Configuration will be the developer or the senior for interface configuration / basis for SLD configuration
the respective will be the responsible
3. I come across the terms like Legacy Systems, Third Party systems, SAP systems, Non-SAP systems, Web Systems.
It depens upon the project ... dont ask like this type questions .. these are very confidential ...
I hope this is technical forum ..
Regards
Chilla
reward points if it is helpful..

SRM Blue print

Dear Friends,
we are implementing SAP SRM 7.0 in our company, can anyone send me the how the blue print of a company look like. As i am a new to SAP SRM i am not having any clue about the SRM blue print. Can any one please send me the SRM blue print to my personal id [email protected]
I will make sure that it is confidential.
Thanks & Regards
ELHAM

Hi，
I suggest you go to the following path to check all the guides for SRM system:
https://websmp207.sap-ag.de/support
Installation & Upgrade Guides
SAP Business Suite Applications
SAP SRM
You may choose any version of SRM server to get all the configuration and other kinds of guides.
Hope this helps.
Regards,
Ivy

Forming a blue print as it were

Pardon but could someone help me with a problem I have? Effectively I'm trying to learn how to take an image of the hand and break it down into something of a wire frame model as if I was trying to make a blue print. However, I have no idea what tools I should use to perform this tasks or where I should really begin.
I have tried using a few filters and the magic wand feature but the filters end up removing alot of detail or not enough. I need to retain important things like the outline of the fingernails and the knuckles however I don't actually want to retain any coloring only the outline of the fingernails, nuckles and so on. Well it's pretty much like the title says I want to take a top down view of the hand, its two sides and the front view and reduce them down to a blue print or just the outline or the major details.
If anyone could point me in the right direction or offer some guidance it would be appreciated. I've attached one of the images I'm trying to learn to process. To anyone who read this thanks for your time.

I decided to play with your concept. I came up with two versions that might give you an idea of ways you could potential go. I did this quick and it's slightly off center.
Tame version...
Spiced up with blend mode tricks.
I must confess I was lazy and started with Mtstuner's first hand version as a start point. That version I will call original image.
1. I first made the paper. It is made up of 4 layers. The first three layers are all solid color fill adjustment layers. I selected three shades of blue...a dark, a medium and a light. In each solid color fill adjustment layer mask I ran the clouds filter; followed by the noise filter; followed by gaussian blur. Notes: Color chips should be set at default black and white before running clouds filter. Add Noise filter had a very low setting...mine is currently set at 4.8 so that is probably the setting I used. The gaussian blur filter is also set at a low setting...just enough to soften the noise.
1a. On top of the three solid color fill adjustment layers, I added a blank layer and used render<clouds on it. I placed this layer's blend mode into Soft Light.
2. Next, I brought in the original version (Mtstuner's hand version). It rests above the layers I made in steps 1 and 1a. I inverted this layer. Ctrl + i if on PC; Cmd + i if on Mac. This makes the hand outline white and the background black. Now, change the hand layer's blend mode to Lighten to drop out the black background. Optional: I cleaned up the image so it was just the hand. I used black paint in a layer mask to hide the stuff I didn't want but if you don't have E9 you can use the eraser tool to erase what you don't want.
3. I added a levels adjustment layer over the hands and used the sliders to make the hands firmer and more opaque. I clipped this levels adjustment layer to the hands layer. (With levels selected, go to menu and select Layer<Create Clipping mask if on E8 or above. If you have E7 or below, the command is Layers<Group with Previous. Alternately, you can use the shortcut...click on levels layer and press ctrl + G if on PC; Cmd + G if on Mac. Another method is to hold in the alt key and hover on the line that separates the layers and click when you see the double ring arrow icon. On the mac, hold in the opt key instead of the alt key.)
4. I then clipped a blue to black gradient map layer to the levels layer. See step #3 for how to clip.
Above shows steps 1-4
5. Next, I made a grid. Create a new blank document 25 x 25 pixels fill document with black. Select<All then go to the menu and choose Edit<Stroke. Set it for 1 px…white…inside for stroke…okay. Choose Edit<Define Pattern from the menu. Name and save the pattern.
6. Add a pattern adjustment layer and select the pattern you made in step #5. I set the scale up for 108. In the pattern's mask, I ran the clouds filter followed by the noise filter to make the grid fade and a little gritty. The grid layer is in Lighten blend mode with an opacity setting of 56%.
7. Next, I added the blue to black gradient Normal 100%…nothing masked entire image is covered by this gradient.
8. I added the details…all text and shape layers were done using white and the blue to black gradient was clipped to each. The opacity of each text and shape layer was set around 75%. Gradient layers were left at 100%.
9. To darken the edges, I added a blank layer and edged with black using a soft brush. This layer is set to multiply blend mode with an opacity setting of 25%.
10. For a final step, I added a border and hid the grid under the border. I added the border by using the rectangular marquee and stroking it with 1 pixel white…inside. I then added my blue to black gradient to cover the white. To hide the grid, I went back to my patter layer and used the marquee to select what I wanted to hide and filled it with black. (I reselected my rectangular marquee area and used Select<Inverse then filled the mask with black.
Above shows steps 5-10
Extra steps for the spiced up version:
Note: From here out, the original version is the completed image from step #10. I combined each of my layers by creating a blank layer and pressing ctrl + shift + alt + e on PC. If on a Mac, use cmd + shift + opt + e. Alternately make a duplicate of your image and flatten it.
11. I added a brightness/contrast adjustment layer over the original (see note above). Brightness is +91;Contrast is +64. I placed this layer in linear dodge blend mode.
12. I duplicated the original image duplicated twice (see note) and brought to top of stack. These were both placed in multiply blend mode.
13. I duplicated the Brightness contrast adjustment layer and brought to the top of the stack. Leave in linear dodge blend mode.
Above shows steps 11-13.

Is there a program for measuring blue prints comparable to ISQFT

Is there a program for measuring blue prints comparable to ISQFT

Supported Operating System(s):
Windows XP, Windows Vista, Windows 7, Windows 2000, Web browser (OS agnostic), Unix, Solaris, Mac OS, Linux, IBM OS/400, HP-UX, AIX
Seems like it works with the old Mac OS. But you might have a look at the Linux/Unix versions. OSX is after all UNIX.
Peter

Is there a way in Pages to show and print all the added "comments?" (those you add by highlighting text) I'd like students to be able to view my comments on printed version of their papers.

Is there a way in Pages to show and print all the added "comments?" (those you add by highlighting text) I am a teacher, and I would like students to be able to view my comments on printed versions of their papers. I know word displays the comments off to the side of the document, and those comments can be viewed all at once and printed alongside the document.

There doesn't appear to be a way to print conmments in either Pages or Numbers in the Mavericks versions.
Jerry

"Error while generating pdf" error come when clicking on "Print Version "

Hello ,
When we execute Query in the Portal there is a 'Print version' button.
When you select it, it opens up print dialog and click OK
It is supposed to send 'pdf' stream to Web browser client on end user but it is not able to generate the pdf .
getting ' Error while generating pdf '
I am working on BI 7.0 .
The same is running fine in the Q Environment .But in Production we are getting this error .
Thanks ,
Rahul

Hi,
I think this is an ADS error. This is a reason why pdf's are not working. We had the same issue.
You can check your installation:
Usage of SAP NetWeaver BI Diagnostics & Support Desk Tool
SAP Note Number: [937697|https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_bex/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d393337363937%7d]
Exceptions: Prerequisites for messages in the area BI Java
SAP Note Number: [1224043 |https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/oss_notes/sdn_oss_bw_bex/~form/handler%7b5f4150503d3030323030363832353030303030303031393732265f4556454e543d444953504c4159265f4e4e554d3d31323234303433%7d]
Solution in our case was to update the SAPADS package to 7.00 17.1
Regards
Andreas

How to add LOGO to the print version of a webreport

Hi experts..can anyone tell me the detail steps for the below query?
Q)how we can add a logo to the print version of a web report. The report is displayed in pdf and the logo should come on every page of the pdf.

hii marasa naidu,
pls check the foll. link
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/4f439490-0201-0010-b3af-d33b499f00fa
hope it helps,
Assigning points is say thanks,
regards,
raghu.

Error in Using Print Version on Standard Report

Hi Experts,
I am working on Governance risk compliance and on clicking 'Print Version' on output of a report, sytem is giving the following error:
Print version System Failure: call FM SALV_WD_EXPORT_PDF to ProgId ssrchgrc_PORT
I have checked the entire configuration as specified in SAP Note : 918236.
Please help.
Thank you
Depesh

Hi Depesh
Did you solve this issue? If so are you able to advise what was done to fix the issue.
I am also having a similar issue. It works OK on our development systems but on our UAT systems we getr this message.
Thanks
Rajdeep Kumar

Print version System Failure: Bean SALV_WD_EXPORT_PDF not found on host

Hi,
I have created a ALV report in ABAP Webdynpro.
When i try to print the ALV Report it gives Communication failure : Print version System Failure: Bean SALV_WD_EXPORT_PDF not found on host.
I belive i need to install Usage Type BI Java.
Can someone help me with the same how to find the installation. I am unable to find what to install.
Thanks and Regards,
Nuzhat

Hi Sergio,
Thanks for the immediate reponse.
I have already gone thru the blog u have sent.
I am uable to do installation of Usage type BI-Java.
I need anyone's help for the same.
Thanks and Regards,
Nuzhat

Format of Business Blue print

What is the format of Business Blue print?

Hi Gopala Rao.,
Business blue print is a WORD doccument,In that we clearly mention our company code,sales organzation... All enterprise structure and all the order types we are using,delivery types,Partner functions..... Like that all the topics covered for the particular company,IT IS NOT MANDATORY that all the topics in SAP SD are mentioned,It depends on the client requirement,we map their business process and we cover all the things in final blueprint
REWARD IF helpfull
Thanks & Regards
Narayana

Blue print version 1.0

Similar Messages

Maybe you are looking for