Blue screen 109 error, mini dump attached, please help

Hi Experts,
I am frequently getting blue screen error in my laptop. Please help. The link to minidump file is given below. I am using Windows 7 ultimate operating system.
I have tried a lot of things to avoid this dump but it keep recurring.
https://onedrive.live.com/redir?resid=49561AD592663106!107&authkey=!AFI9kcFyy6ncfJ8&ithint=file%2c.dmp
regards,
Ayaz

AA
This one DMP file was inconclusive please run driver verifier to find the underlying cause
Please run these tests to verify your memory and find which driver is causing the problem.
If you are overclocking (pushing the components beyond their design) you should revert to default at least until the crashing is solved. If you don't
know what it is you probably are not overclocking.
Since it is more likely to be a driver please run verifier first.
1-Driver verifier (for complete directions see our wiki here)
2-Memtest. (You can read more about running memtest here)
Co-Authored by JMH3143
Wanikiya and Dyami--Team Zigzag

Similar Messages

So many blue screens XP and W2k...please help me.

Thanks for all the advice, Now for a conundrum that is linked (I bealive) to the IRQL....Blue Screen Stop Error.
as a reminder the system hardwear setup at current is this:
1) 1x VData 333mhz PC2700 256mb 2.5v Ram (installed in slot one)
2) 1800+ AMD
3) Sony DVD-ROM (Secondary Master)
4) IBM DTLA-307045 7200Rpm (Primary Master)
5) CoDegen 300w PSU
6)Radeon 9100 Atlantis 128mb DDR AGP x4 G/Card
7) MSI 745 Ultra Main board
EIDE 40pin/40wire cable from SonyDVD -> IDE1
9) 40pin/80 wire IDE UDMA cable from IBM HD -> IDE0
I have turned of all caching apart from the internal cache with the Auto PNP OS in the bios disabled and the rest of the settings on default, I have also updated the Bios from AMi 1.4 to AMI 1.5. On trying to install W2k I recive (half way through the installation) randomly the following Blue screen stop errors:
a) 0x00000050
b) 0x0000001a
c) 0x00000023
d) KMODE_....can't remember the rest (at work)
e) PAGE_FAULT_IN_NONPAGED_AREA
on XP installation I get the following:
a) 0x00000050
b) 000000008e
c) PAGE_FAULT_IN_NONPAGED_AREA
d) 0x0000007b
I have tried installing XP with the internal cache disabled and it works very slowly but does eventually install XP, on enabaling internal caching XP blue screens and restarts the computer automaticlly after around 5 - 30 mins of use. the same with windows 2000 but it freezes on starting up the first time.
I have also run memtest86 v2.9 for 3 hours and it has come up with the following results (total errors are 82):
badram patterns:
0x0fe15008,0x0fe15008,0x0dd11008,0x0dd11008,0x0f714808,0x0f714808,0x0de14c0 8,0xffffffc,0x0c70d000,0x0c70d000,0x0de14a78,0xffffffc,0x0de14ac8,0x0de14b1 8,0xffffffc,0x0d701008,0x0d701008,0x0b529008,0x0b529008
on this I would go out and buy new ram, but as the problem only comes up (for XP) when I enable internal cache, could it be the Stick of ram or the CPU Cache? I have been told by a local dealer that Xp does not like Cache, how can this be? it slows the system down so much when disabled. I am almost in dispare on the problem. please could someone help. I'm confused weather its the CPU or memory stick or (dread to think) the motherboad or even all 3.
Many thanks,
Quinton. ;(

I had very similar probs with xp. Blue screens and all that half way through copying installation files. It would go to various percentages of copying the files when the blue screens would come up, variuos errors would come up. I was using 256mb DDR PC2100 and i swapped it with some 256mb DDR PC2700 and i installed xp ok after that. I will be able to tell shortly if the mem module was knackered when i try to install it into another machine. i found the error codes on MS website by putting the error codes into google and searching and the codes pointed to ram being at fault.

Stop Error / Blue Screen of Death... Please Help

Hello,
I have been having problems with my desktop computer ever since I Installed the BT Total Broadband software.
I have seen a similar topic regarding the Stop error and BSOD,but the problem there appears to be with a wireless connection with a laptop. I, on the other hand, am using an ethernet cable connection with a desktop, so I am not sure if the fix will also work for me.
The problem I have am having is that my computer frequently either resets or BSOD's, with an IRQ_Less_Or_Equal message. This usually occurs within minutes of any kind of internet navigation, and after it has occured once, the problem seems to persist, causing my computer to freeze during bootup, or crashing/resetting shortly after windows (eventually) loads successfully.
Please help, this is driving me crazy!

Thanx again for the replies guys, this is all very helpful!
Firstly, Im running windows XP, SP3.
Also, I have to admit the inside of my computer is quite dusty and could use a good clean.
Finally, its interesting to note that although my computer has a habit of crashing/resetting/BSODing quite regularly during online activity, sometimes the system seems to stabilise, and will run perfectly well for hours at a time.
However I have reached a point where the continual errors, and the resulting 100x crashes and windows failing to load has driven me to seek professional help (here, not a pyschiatrist )

Blue Screen Mayhem....Can someone help me please.

Thanks for all the advice, Now for a conundrum that is linked (I bealive) to the IRQL....Blue Screen Stop Error.
as a reminder the system hardwear setup at current is this:
1) 1x VData 333mhz PC2700 256mb 2.5v Ram (installed in slot one)
2) 1800+ AMD
3) Sony DVD-ROM (Secondary Master)
4) IBM DTLA-307045 7200Rpm (Primary Master)
5) CoDegen 300w PSU
6)Radeon 9100 Atlantis 128mb DDR AGP x4 G/Card
7) MSI 745 Ultra Main board
EIDE 40pin/40wire cable from SonyDVD -> IDE1
9) 40pin/80 wire IDE UDMA cable from IBM HD -> IDE0
I have turned of all caching apart from the internal cache with the Auto PNP OS in the bios disabled and the rest of the settings on default, I have also updated the Bios from AMi 1.4 to AMI 1.5. On trying to install W2k I recive (half way through the installation) randomly the following Blue screen stop errors:
a) 0x00000050
b) 0x0000001a
c) 0x00000023
d) KMODE_....can't remember the rest (at work)
e) PAGE_FAULT_IN_NONPAGED_AREA
on XP installation I get the following:
a) 0x00000050
b) 000000008e
c) PAGE_FAULT_IN_NONPAGED_AREA
d) 0x0000007b
I have tried installing XP with the internal cache disabled and it works very slowly but does eventually install XP, on enabaling internal caching XP blue screens and restarts the computer automaticlly after around 5 - 30 mins of use. the same with windows 2000 but it freezes on starting up the first time.
I have also run memtest86 v2.9 for 3 hours and it has come up with the following results (total errors found 82):
badram patterns:
0x0fe15008,0x0fe15008,0x0dd11008,0x0dd11008,0x0f714808,0x0f714808,0x0de14c0 8,0xffffffc,0x0c70d000,0x0c70d000,0x0de14a78,0xffffffc,0x0de14ac8,0x0de14b1 8,0xffffffc,0x0d701008,0x0d701008,0x0b529008,0x0b529008
on this I would go out and buy new ram, but as the problem only comes up (for XP) when I enable internal cache, could it be the Stick of ram or the CPU Cache? I have been told by a local dealer that Xp does not like Cache, how can this be? it slows the system down so much when disabled. I am almost in dispare on the problem. please could someone help. I'm confused weather its the CPU or memory stick or (dread to think) the motherboad or even all 3.
Many thanks,
Quinton.

Yes it could be cache on the cpu going bad.....Is the cpu new?.....try taking the system down to nothing but mb/cpu/1 memory/1 hdrive and /1 cdrom drive.....And maybe try installing the os with memory and cpu underclocked to see if it makes a diff.

Blue screen with error message

Product Name: HP Media Center M7250n Desktop PC
Product #ED842aa-aba
I have been getting a blue screen with error messages that ask if this is the first time i get the error and then at the end it says it is dumping memory. I would like to wipe my harddrive and reinstall XP but my system is out of warrenty and HP won't provide me a recovery CD. What are my options.
This question was solved.
View Solution.

Hi,
You are most welcome.
"I work for HP."
Please click the "White Kudos" star to say thanks for helping.
Please mark "Accept As Solution" if my help has solved your problem.

I keep getting blue screen and error message to remove this file from system. spooldr.sys

HP Officejet 4500 Wireless All-in-One Printer - G510n    w/operating system     Windows XP Professional
I installed the printer in February and the disk did not finalize the setup process. I went online and
down loaded the drivers and software that was offered from the HP website.
The printer works, but as the months have gone along, I keep getting updates for the printer and
the system needs to reboot and it does automatically.
Now I am getting a blue screen with a critical dump error message. HP error reporting keeps sending
the same message back to restore to earlier date before the updates. That worked for awhile. Now
HP Error system says that malware has corrupted and needs to remove system file     spooldr.sys
Is this in your driver software. Spooldr is the system that caches pages of data for printing in chronological
order....
Can I uninstall my software and drivers and change to the plain & simple, print and scan to prevent the
spool driver from loading to my system?

Thank you for your input. But, It is amazing that you can tell me that I was infected with rootkit.
Without information as to how to fix, your information is after the fact and useless.
I used the Safety Scanner provided to me by HP.  A full scan didn't detect any Malware in any files on my system. But the last screen dump provided the information that   spooldr.sys was corrupted and needed
to be removed.
Coming into HP Form, I did read on the HP website that my system Windows XP Professional was not listed
and noted that the software may have not been just what I needed. This was the reason for the question
about uninstalling and reinstalling less of the program. I really don't need my printer to print backward and
that is all I see that it is doing that other printers don't.
Besides, Kudos goes to the person from HP who sent the email, suggesting I used the HP Update software and drives recommended for my computer system. Computer, printer is working, back to normal and hasn't taken a dump since, I uploaded software and drives for Windows XP Professional.

Satellite A350 - Blue screen with error message

When starting windows7, I am getting blue screen with error message 0x0000116.
Can anyone assist please?

It looks like a graphic card driver is a trouble maker.Try to reinstall a graphic card driver in safe mode (f8 on startup). Read this article for information:
http://social.answers.microsoft.com/Forums/en-US/vistahardware/thread/eb584685-6b8b-4ad7-b6cc-ae5ee78095fb
It's for VISTA but should be the same for win 7 too.

Hp g6-1278sa get blue screen and error message when trying to load xp pro

I have setup a new 500gb toshiba SATA 2 harddrive to run daul boot.
Windows XP pro 32bit and windows 64bit.
Unable to install XP pro, just goes into error and blue screen.
Ive removed the harddrive and placed it in my Packard Bell, loaded XP pro 32bit and win 8 64bit with no problem, and both run fine.
Removed the harddrive from the packard bell laptop and place it back into the HP g6-1278sa, daul boot screen on start up.
Opptions windows 8 or earlyer windows.
Windows 8 works fine.
Windows XP pro starts to load and then we get the blue screen with error message.

Hi Powlers
Ok read this tutorial ( link below ) in how to install XP within Windows 8 OR running Virtual Machine
  http://www.howtogeek.com/171395/how-to-get-windows-xp-mode-on-windows-8/
  OR
  http://www.fixedbyvonnie.com/2014/03/legally-install-windows-xp-free-windows-8-using-virtualbox/
Quick question :: What operating system was your machine shipped with initially ??? Windows 7 ???
Checkurtech
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem****

Blue screen with error code and I have no recovery disks for HP Pavilion dv6-1260se

I have a HP Pavilion dv6-1260se with factory installed operating system of Vista. When booting up the computer, I receive a blue screen with this error message: STOP: c000021a {Fatal System Error}.
                                                            The verification of a KnownDLL failed. system process terminated unexpectedly with
                                                             a status of 0x0000221 (0x007fb9c0 0x00000000).
                                                             The system has been shut down.
I do not have recovery disks for this computer. I tried to order them but them seem to not be available. This is my daughter's computer. She says she started to have trouble after downloading Frost Wire (music share) and then she removed it. We tried going back to an earlier time and that didn't help and then the blue screen with error message appeared. What do I do now?
This question was solved.
View Solution.

Hi,
Assuming your in the US, recovery discs are available to order for that model here. That may be the best option.
You should also be able to do a recovery without the discs as well. Take a look at this document: Recover Windows Vista Operating System Using HP Recovery, and look for the section Restore the PC to its original condition with the HP Recovery Manager if Windows Vista is not accessible. This should allow you to recover the PC.
R
Although I am an HP Employee, I am speaking for myself and not for HP.

My macbook13in has a blue screen with error code 10813

my macbook 13in has a blue screen with error code 10813

Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Also see:
Reinstall OS X Without Erasing the Drive
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

Restarting After a Blue Screen Stop Error

I have received a Blue Screen Stop Error on my Toshiba Satellite 5200 Series laptop.
I could report it here, in full, if that would be helpful. However, it begins by telling me to restart the machine but the unit's Power button is not allowing me to switch it off.
What action should I take ?

Crikey ! Someone at another forum just told me to hold the button down for 5 seconds..... and it worked !

Blue screen fatal error messages - laptop always crashes and now won't even let me restore

My dv6920ea laptop has developed a fault and keeps crashing with blue screen errors, such as "IRQL_NOT_LESS_OR_EQUAL". The problem has become so bad that it happens everytime I turn the laptop on. The laptop ran "Windows memory diagnostic tool" which said that there was a hardware fault. I've tried running a full system recovery to factory setting but sometimes the laptop crashes, and when it doesn't it asks me to insert a windows disc, but my laptop didn't come with one. The laptop is a year and a half old. What can I do to fix this issue? I don't mind completely recovering the laptop to factory settings and I have most(!) of my files backed up.

Hello djbless,
You’re getting blue screens with error IRQL_NOT_LESS_OR_EQUAL.
Run diagnostics to make sure that you are not having a problem with any of the hardware.
Turn off the computer.
As you power it back on tap the F2 key. This will load hardware diagnostics.
Run the startup test.
Go to HP.com and update the drivers, there is a button that says Let HP scan your system for out-of-date and missing drivers and software
Here is a link to the updates.
Clicking the White Kudos star on the left is a way to say Thanks!
Let me know how everything goes.
Have a good day.

TS3694 i think itunes has removed my iphone software. because now not showing home screen. when i tried to restore my phone there generated an error no is 1015. please help me how can i recover my iphone again?

i think itunes has removed my iphone software. because now not showing home screen. when i tried to restore my phone there generated an error no is 1015. please help me how can i recover my iphone again?

From the article which you posted your question from:
Errors related to downgrading iOS
The required resource cannot be found: This alert message occurs when your device has a newer version of iOS than what is available in iTunes. When troubleshooting a device that presents this alert message, go to Settings > General > About and check the version of iOS on the device. If it is newer than the latest released iOS version, the device may have a prerelease developer version of iOS installed. Installing an older version of iOS over a newer version is not supported.
Error 1015: This error is typically caused by attempts to downgrade the iPhone, iPad, or iPod touch's software. This can occur when you attempt to restore using an older .ipsw file. Downgrading to a previous version is not supported. To resolve this issue, attempt to restore with the latest iPhone, iPad, or iPod touch software available from Apple. This error can also occur when an unauthorized modification of the iOS has occurred and you are now trying to restore to an authorized, default state.

Blue screen of death desktop widows 7 Bit help!!!

Hello so like a week ago on Monday I got home from school got on the PC and I started playing BF3 and I was lagging a bit so I just did a reboot and when it started up it like came out of the blue and it came up with a blue screen of Death I haven't installed anything that I can remember the last thing I installed was Norten 360 version 6.0 so later on that week I found out from my friend that you can get a BSOD from having your wires unplugged or dust in the PC so I took everything out and cleaned it and put it back in and double checked it and it looked fine and still BSOD and when I start it up its BSOD same for normal mode all safe modes debugging mode I basically did all the f8 options and f12 and all the other f keys and still BSOD so before I got to my local best buy store for help I just came online for help first below is the blue screen of death that I get so help if you can and thanks for your time! BSOD = blue screen of death
A problem has been detected and Windows has been shut down to prevent damage to your computer.
PROCESS1_INITIALIZATION_FAILED
If this is your first time you've seen this stop error screen,
restart your computer. If this screen appears again follow
these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.
If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select advanced startup options, and then
select Safe mode.
Technical information:
*** STOP: 0x0000006B (0x0000000000000000, 0x0000000000000000, 0x0000000000000000, 0x0000000000000000)
ill look back later on today or tomorrow around 5Pm eastern time.

I would just like to follow up on deusexmachina's solution and explain how to delete that file without booting from the drive.
Boot from a Windows 7 disc/USB and after it loads press SHIFT+F10 to bring up the command line. From here, you can navigate to the "C:\Windows\System32\codeintegrity\" directory and delete the "bootcat.cache" file and reboot.
If you do not have Windows 7 bootable media to boot from then you can download the ISO from here and burn to a disc or use a USB drive:
http://www.mydigitallife.info/official-windows-7-sp1-iso-from-digital-river/
Another option would be to pull the physical drive from the computer and access it using another desktop or laptop to manually delete the "bootcat.cache" file as well.
Afterwards, please upgrade to Service Pack 1, so this issue cannot repeat itself.

HT5642 Unable to download app this time error while downloading app please help!!!

when i download some app from apps store i get the following error
"Unable to download app this time error while downloading app" please help!!!
i ve tried these Things but
didnt workout yet
1) i tried hard reset
2)i tried logout/login Itune & appstore
3)Connected to pc and rest setting Network and Full Rest
all of no use... i dont want to update my softwre from IOS 6.0
Plx help!1

Hey Prahaladvatsan,
Thanks for the question. If I understand correctly, there is a blank app icon on the home screen. It looks like you have already done some troubleshooting. I would recommend that you read these articles, they may be helpful in troubleshooting your issue.
Restart or reset your iPhone, iPad, or iPod touch - Apple Support
Back up and restore your iPhone, iPad, or iPod touch using iCloud or iTunes - Apple Support
Thanks for using Apple Support Communities.
Have a good one,
Mario

Blue screen 109 error, mini dump attached, please help

Similar Messages

Maybe you are looking for