Blue Screen after enabled BitLocker in Windows 8 Pro

Blue screen after starting Windows 8 Pro (not RTM version) after I enabled the BitLocker and after restarting Windows.
Yes the Laptop have TPM, en is no update of Windows 8, its new instal for Windows 8 Pro
Notebook:  HP EliteBook 8560p 16Gb memory.

Dear Customer,
Welcome and thank you for posting your query on HP Support Forum.
 Please update the BIOS firmware and that will fix the issue.
Please click on the below link to download and update the BIOS
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5056950&sp...
I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damage that may arise to your system by using these services. Please be aware that you do this at your own risk.
Hope this helps, for any further queries please reply to the post and feel free to join us again.
**Click the KUDOS star on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
SJ_Bradley
I am an HP Employee.

Similar Messages

  • My laptop become blue screen after windows logo, after i update the graphic ati and intel driver

    I have constant blue screen after windows logo and i have updated all drivers. i was upset the blue screen didn't go away and i did the factory reset. For my suprise, it didn't solve the problem and then i repair it at the comp shop. it was installed with windows 7 home premium 64 (pavilion g4 1006tx) bit as the pre installed windows and activated with the key back on sticker. I updated all drivers and i noticed every time i update the ati and intel driver it will go blue screen after windows logo. after i uninstall it at in safe mode it can load normally. My question is there any solution for my graphic card or is it already damaged? or any other hardware problem? please because i have to use high graphic as i use photoshop

    hii
    make sure you download and update correct driver version of graphic
    and know spec
    more:
    http://support.hp.com/us-en/drivers/selfservice/HP-Pavilion-g4-Notebook-PC-series/5046252/model/5068...
    try to instal  "AMD High-Definition Graphics Driver" only
    and uninstal "Intel High-Definition (HD) Graphics Driver"
    Wisnu Suryandi

  • Thinkpad X300 with windows xp sp2 gets blue screen after standby.

    We have a Thinkpad X300 (with windows xp sp2) gets blue screen after standby. I mean after you close the lid then open it. Anyone has see this kind of behave before?
    Thanks,

    I have found the solution to this problem - hope you are still watching the thread.
    Express install in parallels seems to be the culprit. Do a custom install instead and set your own virtual hard disk size. I set mine to 12 Gb (12000 Mb)and made it a fixed size instead of "growing" or whatever the heck parallels calls it. I also chose shared network instead of "bridged" (I read that someone else had identified this as part of the problem).
    After making those changes it worked like a charm.

  • K9N2 SLI Platinum Blue Screen of Death when installing Windows XP

    My hardware includes:
    •   MSI K9N2 SLI Platinum Motherboard
    •   Corsair XMS2 TWIN2X4096-6400C5
    •   GeForce 9800 GT 512MB GDDR3
    •   AMD Phenom X4 9850 Quad Core Processor, Black Edition 2.5GHz
                    4MB Cache 2000MHz [4000 MT/s] FSB
    •   Thermaltake  Ruby Orb Aluminum Core CPU Cooler
    •   UltraX3 850 Watt ATX Modular Power Supply
    •   [1] Western Digital 200MB7200 ATA133 [Not connected yet]
    •   [1] Maxtor 80MB ATA133 Drive  [Not connected yet]
    •   [1] Western Digital 500GB 7200RPM 16MB SATA II HARD DRIVE
    •   [2] Seagate 7200.11 ST3500320AS 500GB SATA Hard Drives With 32 MB Cache   
                    [Not connected yet]
    •   LG DVD-RW
    •   Toshiba DVD-ROM  [Not connected yet]
    •   AMI Bios  v02.61
    •   Antec Full Tower case
    After partitioning my drive with Fdisk I tried to install Win Xp. My plan was to format the drive with XP. XP starts up and runs through the initial system check then when it prepares to install I get the blue screen that says [my words] "Windows has shut down to prevent damage to your system. If drivers are mentioned try disabling them in the BIOS or get the latest bios update from the equipment manufacturer..."  The error is:
    Stop 0x0000007E  on the next line
    pci.sys - address f7480BFbase  at  f7487000  Datestamp 3b7d855c     
    Just never had these problems setting up a system and soon I will be able to say it took me 2 years to get this running.  Hope someone can help. Thanks

    Use XP Installation disk with SP2 or SP3 included to fix the BSOD.
    Simple your XP installation disk is outdated and cause troubles with latest hardware.

  • My Macbook will not boot the operating system.  It just goes to a blue screen after the apple logo and the spinning wheel goes off.  I took the battery out and held the on/off button for five seconds and reset the PRAM.  I have the old mac os disk.

    My macbook will not boot.  It goes to a blue screen after the logo and wheel goes off.  I have taken the battery out and held the on/off button for five seconds and reset the PRAM.  I have the the original os disk but have not put it in for fear of losing un backed op data.
    Thanks
    Rich

    You won't lose any data unless you erase your hard drive.
    Put your install DVD into the optical drive and reboot. As soon as you hear the boot chime, hold down the "c"key on your keyboard (or the Option key until the Install Disk shows up). That will force your MacBook to boot from the install DVD in the optical drive.
    When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it.When it comes up is your Hard Drive in the list on the left?
    If it is then click on the Mac OS partition of your hard drive in the left hand list. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've selected the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions.

  • Server 2012 R2 Hyper-V Cluster, VM blue screens after migration between nodes.

    I currently have a two node Server 2012 R2 Hyper-v Cluster (fully patched) with a Windows Server 2012 R2 Iscsi target.
    The VMs run fine all day long, but when I try to do a live/quick migration the VM blue screens after about 20 minutes. The blue reports back about a “Critical_Structure_Corruption”.
    I’m being to think it might be down to CPU, as one system has an E-2640v2 and the other one has an E5-2670v3. Should I be able to migrate between these two systems with these type of CPU?
    Tim

    Sorry Tim, is that all 50 blue screen if live migrated?
    Are they all on the latest integration services? Does a cluster validation complete successfully? Are the hosts patched to the same level?
    The fact that if you power them off then migrate them and they boot fine, does point to a processor incompatibility and the memory BIN file is not accepted on the new host.
    Bit of a long shot but the only other thing I can think of off the top of my head if the compatibility option is checked, is checking the location of the BIN file when the VM is running to make sure its in the same place as the VHD\VHDX in the
    CSV storage where the VM is located and not on the local host somewhere like C:\program data\.... that is stopping it being migrated to the new host when the VM is live migrated.
    Kind Regards
    Michael Coutanche
    Blog:   
    Twitter:   LinkedIn:
    Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

  • Imac frozen at blue screen after i went into disk utilities and cleaned my free space. I tried holding down T key as it reboots and i get a message. Start up disk full empty it how can one emptie it if you cant get past the blue screen

    Imac frozen at blue screen after i went into disk utilities and cleaned  free space.
    I tried holding down T key as it reboots
    and i get a message. Start up disk full empty it how can one emptie it if you cant get past the blue screen?
    to make matters worse we bought the IMAC of amazon uk on the 4/07/011 so what can we do?
    please remember how frustrating it is when asking for help when the helper telling you to type something on the screen when its frozen
    Tell us when you can type some instuctions to the software how do you get to the doss prompt so to speak to do this
    Thanks

    i tried all this thanks
    i can not get past blue screen and message Your disk is full it needs to be emptied Please not I cant proceed past this message.
    no matter what you tell me
    Am i right ok in thinking that
    when i went into disk utilities and chose to clean my free space i left it over one hour to do its stuff
    i came back and there was no progress bar just the box so i quit the program and when i opened  mac mail the system just froze  i forced quit mail rebooted and blue screen death
    Now when free space is being cleaned is it the same as windows dose the utility write lots of 0 on the hard drive then rebbot its self to free the space
    basicly is my hard drive full of 00000  is this why im getting this message  because the process was interupted
    I need to know if i need outside help i bought the computer on line on  amazon uk  what dose one do next

  • Blue Screen after clean reinstall snow leopard

    I have a mid 2011 that came with Snow Leopard and disks.  I upgraded from there to Lion - then whatever came next and to Mavericks and finally Yosemite, which was a nightmare for me. I did not use disks of any of the rest.  So I just decided to take my disks and go back to Snow Leopard.  I did this and it asked to go to disk utility and repair both the HD and Permissions.  It came out ok, but there was an instance where looking at the list in HD repair, I saw Suid File System Library Core was moved and cannot be repaired. I went ahead and erased the Hard Drive. Then closed out and installed Snow Leopard. I'm not sure I did it right because I had to rename the new start up disk and typed in unnamed 1.
    after that I was able to start up to Snow Leopard. It worked fine until I tried to download all the updates. Then it didn't seem to restart, but just went to the sign in screen.  So I had to keep shutting down and turning it back on. No updates. One of times I started up, I got the blue screen after the apple and gray screen.
    Also on start up the apple comes up without the chime. Last night I got some instructions from a similar situation and tried to use my disk to a clean reinstall all over.  It didn't work, still the blue screen. (it does fine in safemode.)
    I need help to get this mac running.  If someone can help me......

    Clean Install of Snow Leopard
    Be sure to make a backup first because the following procedure will erase
    the drive and everything on it.
         1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
             with your computer.  Insert the disc into the optical drive and restart the computer.
             After the chime press and hold down the  "C" key.  Release the key when you see
             a small spinning gear appear below the dark gray Apple logo.
         2. After the installer loads select your language and click on the Continue
             button. When the menu bar appears select Disk Utility from the Utilities menu.
             After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
             size.)  Click on the Partition tab in the DU main window.  Set the number of
             partitions to one (1) from the Partitions drop down menu, click on Options button
             and select GUID, click on OK, then set the format type to MacOS Extended
             (Journaled, if supported), then click on the Apply button.
         3. When the formatting has completed quit DU and return to the installer.  Proceed
             with the OS X installation and follow the directions included with the installer.
         4. When the installation has completed your computer will Restart into the Setup
             Assistant. After you finish Setup Assistant will complete the installation after which
             you will be running a fresh install of OS X.  You can now begin the update process
             by opening Software Update and installing all recommended updates to bring your
             installation current.
    Download and install Mac OS X 10.6.8 Update Combo v1.1.

  • Blue Screen After Waking up from sleep.....

    So whenever I put put my screen dowm(the laptop is on) and after while i open my screen.
    There are blinking black colored lights and after while a blue screen appears and says "There is a problem in the computer or installed drivers or in a update so windows is shuttig down to prevent the damage.....
    Dumping files:125   (and so on)
    after it reboots by itself the windows gives me message saying "There is a problem with ATI DISPLAY DRIVER"

    Hi,
    Please try the Microsoft fix:
       http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/blue-screen-after-sleep-mode/...
    Good luck.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Security Suite Blue Screen after reboot

    I am a new customer for verizon fios and have installed/uninstalled the security suite several times.  I am using Windows XP.  I get the blue screen after reboot no matter what I do.  It goes away as soon as I uinstall or choose last known good windows install (using F8 key during reboot).  Is there a known issue. 

    #1 On the blue screen, was their text?
    #2 If so, what did it say?
    #3 Make sure that you do have another software firewall installed (other than one built into Windows).
    b) But the one in Windows, you should disable.
    #4 Make sure that you do have another anti-virus program installed.
    If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

  • Blue screen after update to 10.6.2

    After i updated my iMac 24, it restarted, got past the grey screen with apple logo, then get's stock in the blue screen after that. I can move the mouse but that's it. I tried restarting en reset my PRAM, nothing. Then i disconnected everything extrenal, restarted after resetting PRAM again, nothing???
    What do i have to do??????
    Thanks for any help
    Hans

    Same issue as alembee. Clean install of 10.6. Installed Xcode from disk. Changed a few preferences. Got prompt of 10.6.2 update (plus iTunes and Remote access). When updates were installed, I was given the options to "restart now" or "restart later". I chose now. It looked like I was logged out, but the computer (original MBP Core Duo) stalled at the background nebula/aurora image. I could still move the mouse. Since I enabled ssh remote login, I tested it from another computer. Sure enough, I could login to the MBP and see all the processes running (top). I executed a "sudo reboot" to remotely restart the system.
    I put in the 10.6 disc (held down "c") and went to Disk Utility. Ran Verify Permissions and Verify Disk for good measure (nothing wrong). I have upgraded the RAM and HD since purchase, but I don't see how this would be an issue. Since I was able to login remotely, it was seems to be an issue with proper logout and restarting.

  • Blue screen after shutting down

    Hello, I'm have this issue with my Toshiba satellite. When I go to shut it down it goes to a blue screen that's saying it has encountered a error and etc and then at the bottom it says dumping files etc and the the computer will reboot back to the start up screen. I have sent it in for repair and they replaced the mother board and when I got it back it works for a while then it goes back to the something. So I updated the windows and then I have it start not wanting to start up so I was told but a Toshiba tech to do a total reboot which I did. It started working without any problems until I update windows then it starts going back to the blue screen after shutdown. Any got any ideas on how to fix this ? thanks trey

    hi.. i have also a problem about bluescreen problem.. it occurs while using the laptop. the laptop is a satellite A305-S6837. heres what its says..
    Problem signature:
    Problem Event Name: BlueScreen
    OS Version: 6.0.6002.2.2.0.768.3
    Locale ID: 1033
    Additional information about the problem:
    BCCode: a
    BCP1: 0000096C0000007E
    BCP2: 0000000000000002
    BCP3: 0000000000000001
    BCP4: FFFFF800026B1443
    OS Version: 6_0_6002
    Service Pack: 2_0
    Product: 768_1
    Files that help describe the problem:
    C:\Windows\Minidump\Mini020910-01.dmp
    C:\Users\Owner\AppData\Local\Temp\WER-113662-0.sysdata.xml
    C:\Users\Owner\AppData\Local\Temp\WER93E5.tmp.version.txt
    and then when i used your bluescreenview, here what is says:
    Mini020910-01.dmp
    2/9/2010 5:39:13 PM
    IRQL_NOT_LESS_OR_EQUAL
    0x0000000a 0000096c`0000007e 00000000`00000002 00000000`00000001 fffff800`026b1443 ntoskrnl.exe ntoskrnl.exe+5a450     x64  C:\Windows\minidump\Mini020910-01.dmp 2 15 6002 
    and at the bottom part:
    ntoskrnl.exe ntoskrnl.exe+5a1ee fffff800`0264d000 fffff800`02b65000 0x00518000 0x4a7801eb 8/4/2009 5:39:55 PM      
    please help me to configure the problem.. thank you

  • Blue screen after Error 37: a bad filename or volume was encountered

    I get a PAGEFAULT_IN_NONPAGEDAREA blue screen after I encounter multiple Error 37: a bad filename or volume was encountered.
    Anyone encounter this issue and how to you send info to apple for them to fix their buggy code?
    Their support of code which will run bug-free on vista seems to be lacking (I understand there are two parties to this marriage).
    Help anyone?

    I noticed a few days ago that (at least on my box) Quicktime seems to have "issues" with >31 characters anywhere in the file path.
    Is it possible that you have some folder along the way to your movie that has more than 31 charaters?
    Shorten if necessary and see if that works.
    dual 2.7 G5   Mac OS X (10.4.5)  

  • Blue screen after powering, scoped the forums, tried out all the suggestions, no luck

    Really need your help guys!
    Blue screen after powering
    Imac alu, SL 10.6.8
    Failed methods so far:
    -repair disk permissions via external system or install DVD, no luck
    -->message "Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired."
    i know that Apple says the message can be ignored
    -unplugging the imac of every peripheral device as well as power cord,
    holding down the power switch for 10 sec.
    -doing p-ram reset
    -booting in safe mode, blue screen-->loading circle+blue screen--> no loading circle + blue screen---> loop phenomen
    Do have any other suggestions?
    When booting from an external hard drive, the icon of the internal hard drive on the desktop has got a lock now. Do you know what to make of that?
    Thanks,
    G.

    Nevermind!  Used suggestion from an older post and it worked!

  • TS3274 My iPad mini retina is still having random reboots with blue screen after updating to iOS 8.0.2.i also did reset my iPad.But the problem still persis

    My iPad mini retina is still having random reboots with blue screen after updating to iOS 8.0.2.i also did reset my iPad.But the problem still persists

    Could you add your problem here: https://discussions.apple.com/thread/6569052? This makes sure the discussion and in one place and we can attract more attention from Apple. 

Maybe you are looking for