Blue Screen after MS Office 2013 upgraded from Office 2007
Can you please look at the mini dump and the blue screen message and advise.
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.256.48
Locale ID: 4105
Additional information about the problem:
BCCode: 50
BCP1: FFFFF900C230F000
BCP2: 0000000000000001
BCP3: FFFFF960000E2254
BCP4: 0000000000000000
OS Version: 6_1_7601
Service Pack: 1_0
Product: 256_1
Files that help describe the problem:
C:\Windows\Minidump\042214-57345-01.dmp
C:\Users\gleahy\AppData\Local\Temp\WER-359145-0.sysdata.xml
Thank-you,
Gwen
Hi Gwen,
In order to assist you, we will need the .DMP files to analyze what exactly occurred at the time of the crash, etc.
If you don't know where .DMP files are located, here's how to get to them:
1. Navigate to the %systemroot%\Minidump folder.
2. Copy any and all DMP files in the Minidump folder to your Desktop and then zip up these files.
3. Upload the zip containing the .DMP files to Onedrive or a hosting site of your choice and paste in your reply. Prefered sites: Onedrive, Mediafire, Dropbox, etc. Nothing with wait-timers.
4 (optional): The type of .DMP files located in the Minidump folder are known as Small Memory Dumps. In %systemroot% there will be what is known as a Kernel-Dump (if your system is set to generate). It is labeled MEMORY.DMP. The difference
between Small Memory Dumps and Kernel-Dumps in the simplest definition is a Kernel-Dump contains
much more information at the time of the crash, therefore allowing further debugging of your issue. If your upload speed permits it, and you aren't going against any strict bandwidth and/or usage caps, etc, the Kernel-Dump is the best
choice. Do note that Kernel-Dumps are much larger in size due to containing much more info, which is why I mentioned upload speed, etc.
If you are going to use Onedrive but don't know how to upload to it, please visit the following:
Upload photos and files to Onedrive.
Please note that any "cleaner" programs such as TuneUp Utilities, CCleaner, etc, by default will delete .DMP files upon use.
If your computer is not generating .DMP files, please do the following:
1. Start > type %systemroot% which should show the Windows folder, click on it. Once inside that folder, ensure there is a Minidump folder created. If not, CTRL-SHIFT-N to make a New Folder and name it Minidump.
2. Windows key + Pause key. This should bring up System. Click Advanced System Settings on the left > Advanced > Performance > Settings > Advanced > Ensure there's a check-mark for 'Automatically manage paging file size for all
drives'.
3. Windows key + Pause key. This should bring up System. Click Advanced System Settings on the left > Advanced > Startup and Recovery > Settings > System Failure > ensure there is a check mark next to 'Write an event to the system
log'.
Ensure Small Memory Dump is selected and ensure the path is %systemroot%\Minidump.
4. Double check that the WERS is ENABLED:
Start > Search > type services.msc > Under the name tab, find Windows Error Reporting Service > If the status of the service is not Started then right click it and select Start. Also ensure that under Startup Type it is set to Automatic rather than
Manual. You can do this by right clicking it, selecting properties, and under General selecting startup type to 'Automatic', and then click Apply.
If you cannot get into normal mode to do any of this, please do this via Safe Mode.
Regards,
Patrick
“Be kind whenever possible. It is always possible.” - Dalai Lama
Similar Messages
-
Completely Blank Blue Screen after Laptop is woken up from Sleep
Initial State: 1) Laptop is ON
2) Laptop is connected by LAN cable to ADSL Modem (BSNL Connection).3) Internet Connection is ON.4) Browser is ON.5) McAfee LiveSafe Internet Security (Antivirus) is ON.6) Skype is ON but not connected or logged on7) Download Accelerator Plus is ON but not in use. Process:1) I leave the laptop on and untouched for 5-10 minutes while I do something else.2) The laptop is in a Sleep State when I come back.3) I press a key or move the mouse to wake it up. Final State:1) I get the initial Windows Page on which I have to click on username to login.2) When I click on it, I do not get the page where I should enter password. Instead, I get a completely blank blue screen with absolutely nothing on it. I have to hard-press the power button for 10 seconds and then switch the laptop back on losing valuable data. Please help.Hi , Welcome to the HP Forums!
It is a superb place to find answers and suggestions! For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide. Learn How to Post and More I grasp that when you attempt to wake the notebook from sleep by moving the mouse or pressing a key, you are presented with your log on screen. When you click your username and before you enter the password it immediately presents a blue screen and becomes unresponsive. Here are links to two documents I believe will assist you. HP PCs - Troubleshooting Sleep and Hibernate Issues (Windows 8) HP PCs - Computer Locks Up or Freezes (Windows 8) To say thanks for replying please click the thumbs up button below. If this resolved your difficulty please let other people know the good news by selecting solution provided. This would allow it to be found with greater ease. Best of Luck! -
Office 2013 Upgrade - Retain Recently Opened Documents/WorkBooks from Office 2010
Hello,
In our Windows 7 environment, we are planning to upgrade our users from Office Professional Plus 2010 to Office Professional Plus 2013 via SCCM 2012 R2. One of the user requirements is that we are to retain their recently opened files/documents
so that the history will still be shown even after they have upgraded over to Office 2013.
From what I have researched, it may be possible to do this if we copy some of the user's registry keys from Office 2010 and export them to the Office 2013. However, I have not tried it and wanted to see what thoughts you guys may have on this.
Has anyone run into this situation? Any advice on this? Thanks.Hi Jimmy,
Did you get any error message when you try to open an Excel file/Word document?
If so, you can post the error message and event log here.Also ,if you had antivirus software installed, try to disable them to test this issue.
In addition, what happens if you add the network server location as a trusted location?
Wind Zhang
TechNet Community Support -
Office 2013 Pro from O365 can't activate after a restore from backup
Office 2013 downloaded from O365 account and activated on windows 7 pro computer.
After a virus, restored computer from full system backup from 3 weeks prior using Storage server essentials server computer backup.
Everything (Adobe, W7) else is fully intact but the Office 2013 install warns about activation.
The problem is that the activation window has activate by phone disabled and the internet activation is not working.
Was looking for any suggestions before I uninstall and reinstall office 2013.
TIA
Glenn
GBHi,
If you are using Office 365, can you just activate it using your Office 365 account?
In any Office application, go to FILE -> Office Account -> type in your Office 365 account and password, try if this helps fix the problem.
If you are using Office 2013, is it a volume license edition? Or you are using a product key?
I'd like to know what error it prompts when the internet activation is not working, it helps to determine the cause.
Thanks,
Melon Chen
Forum Support
Come back and mark the replies as answers if they help and unmark them if they provide no help.
If you have any feedback on our support, please click
here -
Blue Screen After Waking up from sleep.....
So whenever I put put my screen dowm(the laptop is on) and after while i open my screen.
There are blinking black colored lights and after while a blue screen appears and says "There is a problem in the computer or installed drivers or in a update so windows is shuttig down to prevent the damage.....
Dumping files:125 (and so on)
after it reboots by itself the windows gives me message saying "There is a problem with ATI DISPLAY DRIVER"Hi,
Please try the Microsoft fix:
http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/blue-screen-after-sleep-mode/...
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem. -
iPhone 5s Random Blue Screen after last Update
I have had 9 iOS devices either just show the apple log and go black or a dead battery even thou they were on the chargers for hours.
I brought them to the Apple store. No one could give me an answer as to why it did it. All you have to do to fix it is do this:
To put your device into recovery mode, follow these steps:
Turn off your device and leave it off.
Plug in your device's USB cable to a computer with iTunes.
Hold down the Home button on your device as you connect the USB cable. ...
When you see this screen, release the Home button.
From the consensus of the people in my office that did the iOS 8.3 update. The ones that did the update while the iPhone or iPad was on a charger are not experiancing any issues. The ones that did the update without being on a charger are the ones experianceing the issues at hand. -
Blue Screen after clean reinstall snow leopard
I have a mid 2011 that came with Snow Leopard and disks. I upgraded from there to Lion - then whatever came next and to Mavericks and finally Yosemite, which was a nightmare for me. I did not use disks of any of the rest. So I just decided to take my disks and go back to Snow Leopard. I did this and it asked to go to disk utility and repair both the HD and Permissions. It came out ok, but there was an instance where looking at the list in HD repair, I saw Suid File System Library Core was moved and cannot be repaired. I went ahead and erased the Hard Drive. Then closed out and installed Snow Leopard. I'm not sure I did it right because I had to rename the new start up disk and typed in unnamed 1.
after that I was able to start up to Snow Leopard. It worked fine until I tried to download all the updates. Then it didn't seem to restart, but just went to the sign in screen. So I had to keep shutting down and turning it back on. No updates. One of times I started up, I got the blue screen after the apple and gray screen.
Also on start up the apple comes up without the chime. Last night I got some instructions from a similar situation and tried to use my disk to a clean reinstall all over. It didn't work, still the blue screen. (it does fine in safemode.)
I need help to get this mac running. If someone can help me......Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
with your computer. Insert the disc into the optical drive and restart the computer.
After the chime press and hold down the "C" key. Release the key when you see
a small spinning gear appear below the dark gray Apple logo.
2. After the installer loads select your language and click on the Continue
button. When the menu bar appears select Disk Utility from the Utilities menu.
After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
size.) Click on the Partition tab in the DU main window. Set the number of
partitions to one (1) from the Partitions drop down menu, click on Options button
and select GUID, click on OK, then set the format type to MacOS Extended
(Journaled, if supported), then click on the Apply button.
3. When the formatting has completed quit DU and return to the installer. Proceed
with the OS X installation and follow the directions included with the installer.
4. When the installation has completed your computer will Restart into the Setup
Assistant. After you finish Setup Assistant will complete the installation after which
you will be running a fresh install of OS X. You can now begin the update process
by opening Software Update and installing all recommended updates to bring your
installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1. -
Blue screen after update to 10.6.2
After i updated my iMac 24, it restarted, got past the grey screen with apple logo, then get's stock in the blue screen after that. I can move the mouse but that's it. I tried restarting en reset my PRAM, nothing. Then i disconnected everything extrenal, restarted after resetting PRAM again, nothing???
What do i have to do??????
Thanks for any help
HansSame issue as alembee. Clean install of 10.6. Installed Xcode from disk. Changed a few preferences. Got prompt of 10.6.2 update (plus iTunes and Remote access). When updates were installed, I was given the options to "restart now" or "restart later". I chose now. It looked like I was logged out, but the computer (original MBP Core Duo) stalled at the background nebula/aurora image. I could still move the mouse. Since I enabled ssh remote login, I tested it from another computer. Sure enough, I could login to the MBP and see all the processes running (top). I executed a "sudo reboot" to remotely restart the system.
I put in the 10.6 disc (held down "c") and went to Disk Utility. Ran Verify Permissions and Verify Disk for good measure (nothing wrong). I have upgraded the RAM and HD since purchase, but I don't see how this would be an issue. Since I was able to login remotely, it was seems to be an issue with proper logout and restarting. -
Office 2013 upgrade so that users keep individual properties
How do I set up an Office 2013 upgrade msi so that the individual user can keep their current properties? The msi will be sitting in a Skydrive account.
I need to upgrade about 25 remote users to Office 2013. These users are in different locations, mixture if window 7 and 8 machines. All machines are currently running Office 2010.
We are VL holders so I can create a msi file but after running two test upgrades most of the individual user properties (default templates, outlook settings) are not being kept. It looks like a new install.
Any help is appreciated.I would recommend using USMT 5 for Office 2013.
http://blogs.technet.com/b/nepapfe/archive/2013/04/15/using-usmt-v-5-to-migrate-your-profile-data-apps-amp-profile-settings.aspx
Before that, we need this hotfix:
http://support.microsoft.com/kb/2846838
Tony Chen
TechNet Community Support -
My macbook will not boot. It goes to a blue screen after the logo and wheel goes off. I have taken the battery out and held the on/off button for five seconds and reset the PRAM. I have the the original os disk but have not put it in for fear of losing un backed op data.
Thanks
RichYou won't lose any data unless you erase your hard drive.
Put your install DVD into the optical drive and reboot. As soon as you hear the boot chime, hold down the "c"key on your keyboard (or the Option key until the Install Disk shows up). That will force your MacBook to boot from the install DVD in the optical drive.
When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it.When it comes up is your Hard Drive in the list on the left?
If it is then click on the Mac OS partition of your hard drive in the left hand list. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've selected the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions. -
Really need your help guys!
Blue screen after powering
Imac alu, SL 10.6.8
Failed methods so far:
-repair disk permissions via external system or install DVD, no luck
-->message "Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired."
i know that Apple says the message can be ignored
-unplugging the imac of every peripheral device as well as power cord,
holding down the power switch for 10 sec.
-doing p-ram reset
-booting in safe mode, blue screen-->loading circle+blue screen--> no loading circle + blue screen---> loop phenomen
Do have any other suggestions?
When booting from an external hard drive, the icon of the internal hard drive on the desktop has got a lock now. Do you know what to make of that?
Thanks,
G.Nevermind! Used suggestion from an older post and it worked!
-
Upgrading from Office 2010 to 365
Upgrading from Office 2010 Pro to 365 Pro Plus - I know you must uninstall 2010 and install 365 or can run them concurrently. Question is - if you uninstall 2010 and install 365, what settings are lost and what settings are retained? Outlook signatures? Word
and Excel settings and preferences?
Also must the OST files be re-downloaded again? I hear there's a 40% compression improvement so this might be ideal, just want to know if the GPO to not re-download the OSTs actually works in this scenario?Hi,
Uninstall Office 2010 will not remove any user settings, the user settings will migrate upon the first use of each Office 2013 application.
By default, when Outlook 2013 is installed, a new compressed version of the Outlook data file (.ost) is created. This new compressed version of the .ost is up to 40% smaller than the size of the .ost files that were created in earlier versions of Outlook.
So it is recommended to use the new .ost file.
The "Do not create new OST file on upgrade" policy also works for Outlook 2013, however you might need to download the new Outlook Group Policy template (Outlk15.admx). Outlook 2010 template should not work in this scenario.
Regards,
A.B. -
My iPad mini retina is still having random reboots with blue screen after updating to iOS 8.0.2.i also did reset my iPad.But the problem still persists
Could you add your problem here: https://discussions.apple.com/thread/6569052? This makes sure the discussion and in one place and we can attract more attention from Apple.
-
MacBook Pro "Core i7" 2.2 15" Early 2011
2.2 GHz Core i7 (I7-2720QM)
Intro.
February 24, 2011
Disc.
October 24, 2011
Order
MC723LL/A
Model
A1286 (EMC 2353-1*)
Family
Early 2011 15"
ID
MacBookPro8,2
RAM
4 GB
VRAM
1 GB*
Storage
750 GB (5400 RPM)
Optical
8X DL "SuperDrive"
Ok so i got this laptop in a few days ago here are the problems and the things i have tried. This laptop when it came to me did not have a hard drive, so obviously no OS. Upon installing a hard drive then trying to load Yosemite from a USB stick, I turn mac on, sleep light will blink 5 times then boot, Will come to normal gray screen then apple logo, will then load the OS install, but go straight to a blue screen with vertical lines. Tried different hard drive, tried different RAM sizes and speeds, tried different OS, tried CD instead. Have done numerous PRAM and SMC resets. trying Safe mode gets me a panic cpu 4 caller error then restarts. I have tried using a hard drive that had an OS already installed and will go straight to blue screen after loading. I have tried fsck -fy in single user mode. I do get that disk2s3 is write protected in single user mode, but im pretty sure that its the OS disk. I do not see a second hard drive in single user mode but i believe that because its not partitioned yet. Any ideas community?Tried doing OS X lion by CD now, and will only get half way through load bar before the apple logo and loading bar disappears and then it will sit at a gray screen.
-
I have dead blue screen after downloading the ios 7.1.1
I have dead blue screen after downloading the ios 7.1.1.
What should I do to fix it?Hello hagarar,
If your iPhone started displaying a blue screen after running a software update, I suggest the steps in the following article.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Thanks for reaching out,
-Joe
Maybe you are looking for
-
How can I import my keyboard shortcuts from my iPhone to my new MACBOOK pro?
Now I'm guessing that 99% of you don't use this feature on iPhone or Macbook so I'm curous to know who knows the answer I recruit a lot and have canned texts and emails (which means I usually say the same thing) in my iPhone I set it up (by going to
-
Sequence ID search in archived messages
Hi All, I was looking to see if the sequence ID search will work on archived messages? I don't see any technical attributes section for extended search in archived messages tab in message monitoring of PO 7.4 SP6. Any idea? thx mike
-
Spot Channels & Smart Objects in Photoshop CS4
Please Help! I am trying to replace a smart object in Photoshop CS4 with a .psd, pdf or tiff image that contains a spot channel and it is not being honored in Photoshop The Channel tab does not honor the "Spot Channel" from the replaced Smart Object
-
Stop Safari from launching at start up
Can someone please tell me how to stop Safari from launching automatically when I boot my computer. One day it just started launching on it's own. Very annoying to wait for Safari as it pauses my bootup. If you can help, please email me at [email pro
-
HT3207 Help, trying to switch my computer to high performance but not there
Hey im just wondering how to switch my computer from energy performance to high performance, im going in system prefernces, energy saver and the option isnt there, would it be somewhere elsE