Blue screen after recovery

I have a Satellite L655D-S5148. I just received the set of Recovery Media. After installing I had a crash dump with
the following information displayed once laptop rebooted:
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 1033
Additional information about the problem:
BCCode: 1e
BCP1: 0000000000000000
BCP2: 0000000000000000
BCP3: 0000000000000000
BCP4: 0000000000000000
OS Version: 6_1_7600
Service Pack: 0_0
Product: 768_1
I ordered the recovery media because I was having this problem before and figured restoring the laptop to its out of theboxconfigurationwouldeliminatethistypeofissue. Anysuggestions.
Solved!
Go to Solution.

Bug Check 0xA: IRQL_NOT_LESS_OR_EQUAL
Caused By Driver : ndis.sys
Implicates networking. Open Device Manager (devmgmt.msc), expand Network adapters, and see if anything unusual shows.
==================================================
Dump File         : 022313-32760-01.dmp
Crash Time        : 2/24/2013 1:00:23 PM
Bug Check String : IRQL_NOT_LESS_OR_EQUAL
Bug Check Code    : 0x0000000a
Parameter 1       : 00000000`0172dbd8
Parameter 2       : 00000000`00000002
Parameter 3       : 00000000`00000001
Parameter 4       : fffff800`02a777de
Caused By Driver : ndis.sys
Caused By Address : ndis.sys+3b0a
File Description :
Product Name      :
Company           :
File Version      :
Processor         : x64
Computer Name     :
Full Path         : C:\Test\022313-32760-01.dmp
Processors Count : 2
Major Version     : 15
Minor Version     : 7600
==================================================
-Jerry

Similar Messages

Blue screen after recovery on DV9000 notebook

I had to replace my harddrive, so I did so, and inserted the HP recovery disks. Ran the recovery, no errors.
But after the recovery is complete, and the laptop reboots, I get the typical loading windows black screen, and then it begins to load the initial setup screen, then suddenly the screen turns blue, and it just sits there... I have left to sit for a while, and nothing happens. When the screen goes blue, it looks like a window maximizing.
This is a HP Pavillion DV9000 17" laptop. The recovery disks are for windows vista.
I have run the recovery twice now, and the same thing happens. No errors or anything.

Thanks, I had just finished another restore... And I left it sit long enough this time i guess... It finally started the setup process. Now I am waiting on the HP software to install. But it seems to be working now.
Thanks for the idea though.

Is anyone else experiencing their phone randomly locking up and going to a blue screen after the most recent update?

iPhone 5s Random Blue Screen after last Update

I have had 9 iOS devices either just show the apple log and go black or a dead battery even thou they were on the chargers for hours.
I brought them to the Apple store. No one could give me an answer as to why it did it. All you have to do to fix it is do this:
To put your device into recovery mode, follow these steps:
Turn off your device and leave it off.
Plug in your device's USB cable to a computer with iTunes.
Hold down the Home button on your device as you connect the USB cable. ...
When you see this screen, release the Home button.
From the consensus of the people in my office that did the iOS 8.3 update. The ones that did the update while the iPhone or iPad was on a charger are not experiancing any issues. The ones that did the update without being on a charger are the ones experianceing the issues at hand.

I have dead blue screen after downloading the ios 7.1.1

I have dead blue screen after downloading the ios 7.1.1.
What should I do to fix it?

Hello hagarar,
If your iPhone started displaying a blue screen after running a software update, I suggest the steps in the following article.
iPhone: Hardware troubleshooting
http://support.apple.com/kb/TS2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIs and corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Thanks for reaching out,
-Joe

Blue screen after Error 37: a bad filename or volume was encountered

I get a PAGEFAULT_IN_NONPAGEDAREA blue screen after I encounter multiple Error 37: a bad filename or volume was encountered.
Anyone encounter this issue and how to you send info to apple for them to fix their buggy code?
Their support of code which will run bug-free on vista seems to be lacking (I understand there are two parties to this marriage).
Help anyone?

I noticed a few days ago that (at least on my box) Quicktime seems to have "issues" with >31 characters anywhere in the file path.
Is it possible that you have some folder along the way to your movie that has more than 31 charaters?
Shorten if necessary and see if that works.
dual 2.7 G5 Mac OS X (10.4.5)

My Macbook will not boot the operating system. It just goes to a blue screen after the apple logo and the spinning wheel goes off. I took the battery out and held the on/off button for five seconds and reset the PRAM. I have the old mac os disk.

My macbook will not boot. It goes to a blue screen after the logo and wheel goes off. I have taken the battery out and held the on/off button for five seconds and reset the PRAM. I have the the original os disk but have not put it in for fear of losing un backed op data.
Thanks
Rich

You won't lose any data unless you erase your hard drive.
Put your install DVD into the optical drive and reboot. As soon as you hear the boot chime, hold down the "c"key on your keyboard (or the Option key until the Install Disk shows up). That will force your MacBook to boot from the install DVD in the optical drive.
When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it.When it comes up is your Hard Drive in the list on the left?
If it is then click on the Mac OS partition of your hard drive in the left hand list. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've selected the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions.

Blue screen after powering, scoped the forums, tried out all the suggestions, no luck

Really need your help guys!
Blue screen after powering
Imac alu, SL 10.6.8
Failed methods so far:
-repair disk permissions via external system or install DVD, no luck
-->message "Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired."
i know that Apple says the message can be ignored
-unplugging the imac of every peripheral device as well as power cord,
holding down the power switch for 10 sec.
-doing p-ram reset
-booting in safe mode, blue screen-->loading circle+blue screen--> no loading circle + blue screen---> loop phenomen
Do have any other suggestions?
When booting from an external hard drive, the icon of the internal hard drive on the desktop has got a lock now. Do you know what to make of that?
Thanks,
G.

Nevermind! Used suggestion from an older post and it worked!

TS3274 My iPad mini retina is still having random reboots with blue screen after updating to iOS 8.0.2.i also did reset my iPad.But the problem still persis

My iPad mini retina is still having random reboots with blue screen after updating to iOS 8.0.2.i also did reset my iPad.But the problem still persists

Could you add your problem here: https://discussions.apple.com/thread/6569052? This makes sure the discussion and in one place and we can attract more attention from Apple.

Server 2012 R2 Hyper-V Cluster, VM blue screens after migration between nodes.

I currently have a two node Server 2012 R2 Hyper-v Cluster (fully patched) with a Windows Server 2012 R2 Iscsi target.
The VMs run fine all day long, but when I try to do a live/quick migration the VM blue screens after about 20 minutes. The blue reports back about a “Critical_Structure_Corruption”.
I’m being to think it might be down to CPU, as one system has an E-2640v2 and the other one has an E5-2670v3. Should I be able to migrate between these two systems with these type of CPU?
Tim

Sorry Tim, is that all 50 blue screen if live migrated?
Are they all on the latest integration services? Does a cluster validation complete successfully? Are the hosts patched to the same level?
The fact that if you power them off then migrate them and they boot fine, does point to a processor incompatibility and the memory BIN file is not accepted on the new host.
Bit of a long shot but the only other thing I can think of off the top of my head if the compatibility option is checked, is checking the location of the BIN file when the VM is running to make sure its in the same place as the VHD\VHDX in the
CSV storage where the VM is located and not on the local host somewhere like C:\program data\.... that is stopping it being migrated to the new host when the VM is live migrated.
Kind Regards
Michael Coutanche
Blog:
Twitter: LinkedIn:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Imac frozen at blue screen after i went into disk utilities and cleaned my free space. I tried holding down T key as it reboots and i get a message. Start up disk full empty it how can one emptie it if you cant get past the blue screen

Imac frozen at blue screen after i went into disk utilities and cleaned free space.
I tried holding down T key as it reboots
and i get a message. Start up disk full empty it how can one emptie it if you cant get past the blue screen?
to make matters worse we bought the IMAC of amazon uk on the 4/07/011 so what can we do?
please remember how frustrating it is when asking for help when the helper telling you to type something on the screen when its frozen
Tell us when you can type some instuctions to the software how do you get to the doss prompt so to speak to do this
Thanks

i tried all this thanks
i can not get past blue screen and message Your disk is full it needs to be emptied Please not I cant proceed past this message.
no matter what you tell me
Am i right ok in thinking that
when i went into disk utilities and chose to clean my free space i left it over one hour to do its stuff
i came back and there was no progress bar just the box so i quit the program and when i opened mac mail the system just froze i forced quit mail rebooted and blue screen death
Now when free space is being cleaned is it the same as windows dose the utility write lots of 0 on the hard drive then rebbot its self to free the space
basicly is my hard drive full of 00000 is this why im getting this message because the process was interupted
I need to know if i need outside help i bought the computer on line on amazon uk what dose one do next

My laptop become blue screen after windows logo, after i update the graphic ati and intel driver

I have constant blue screen after windows logo and i have updated all drivers. i was upset the blue screen didn't go away and i did the factory reset. For my suprise, it didn't solve the problem and then i repair it at the comp shop. it was installed with windows 7 home premium 64 (pavilion g4 1006tx) bit as the pre installed windows and activated with the key back on sticker. I updated all drivers and i noticed every time i update the ati and intel driver it will go blue screen after windows logo. after i uninstall it at in safe mode it can load normally. My question is there any solution for my graphic card or is it already damaged? or any other hardware problem? please because i have to use high graphic as i use photoshop

hii
make sure you download and update correct driver version of graphic
and know spec
more:
http://support.hp.com/us-en/drivers/selfservice/HP-Pavilion-g4-Notebook-PC-series/5046252/model/5068...
try to instal "AMD High-Definition Graphics Driver" only
and uninstal "Intel High-Definition (HD) Graphics Driver"
Wisnu Suryandi

Thinkpad X300 with windows xp sp2 gets blue screen after standby.

We have a Thinkpad X300 (with windows xp sp2) gets blue screen after standby. I mean after you close the lid then open it. Anyone has see this kind of behave before?
Thanks,

I have found the solution to this problem - hope you are still watching the thread.
Express install in parallels seems to be the culprit. Do a custom install instead and set your own virtual hard disk size. I set mine to 12 Gb (12000 Mb)and made it a fixed size instead of "growing" or whatever the heck parallels calls it. I also chose shared network instead of "bridged" (I read that someone else had identified this as part of the problem).
After making those changes it worked like a charm.

Blue Screen After Load, No Safe Boot, No Reinstall possible. Think you can figure this one out??

MacBook Pro "Core i7" 2.2 15" Early 2011
2.2 GHz Core i7 (I7-2720QM)
Intro.
February 24, 2011
Disc.
October 24, 2011
Order
MC723LL/A
Model
A1286 (EMC 2353-1*)
Family
Early 2011 15"
ID
MacBookPro8,2
RAM
4 GB
VRAM
1 GB*
Storage
750 GB (5400 RPM)
Optical
8X DL "SuperDrive"
Ok so i got this laptop in a few days ago here are the problems and the things i have tried. This laptop when it came to me did not have a hard drive, so obviously no OS. Upon installing a hard drive then trying to load Yosemite from a USB stick, I turn mac on, sleep light will blink 5 times then boot, Will come to normal gray screen then apple logo, will then load the OS install, but go straight to a blue screen with vertical lines. Tried different hard drive, tried different RAM sizes and speeds, tried different OS, tried CD instead. Have done numerous PRAM and SMC resets. trying Safe mode gets me a panic cpu 4 caller error then restarts. I have tried using a hard drive that had an OS already installed and will go straight to blue screen after loading. I have tried fsck -fy in single user mode. I do get that disk2s3 is write protected in single user mode, but im pretty sure that its the OS disk. I do not see a second hard drive in single user mode but i believe that because its not partitioned yet. Any ideas community?

Tried doing OS X lion by CD now, and will only get half way through load bar before the apple logo and loading bar disappears and then it will sit at a gray screen.

Blue Screen after clean reinstall snow leopard

I have a mid 2011 that came with Snow Leopard and disks. I upgraded from there to Lion - then whatever came next and to Mavericks and finally Yosemite, which was a nightmare for me. I did not use disks of any of the rest. So I just decided to take my disks and go back to Snow Leopard. I did this and it asked to go to disk utility and repair both the HD and Permissions. It came out ok, but there was an instance where looking at the list in HD repair, I saw Suid File System Library Core was moved and cannot be repaired. I went ahead and erased the Hard Drive. Then closed out and installed Snow Leopard. I'm not sure I did it right because I had to rename the new start up disk and typed in unnamed 1.
after that I was able to start up to Snow Leopard. It worked fine until I tried to download all the updates. Then it didn't seem to restart, but just went to the sign in screen. So I had to keep shutting down and turning it back on. No updates. One of times I started up, I got the blue screen after the apple and gray screen.
Also on start up the apple comes up without the chime. Last night I got some instructions from a similar situation and tried to use my disk to a clean reinstall all over. It didn't work, still the blue screen. (it does fine in safemode.)
I need help to get this mac running. If someone can help me......

Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. After you finish Setup Assistant will complete the installation after which
         you will be running a fresh install of OS X. You can now begin the update process
         by opening Software Update and installing all recommended updates to bring your
         installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

Blue Screen After Waking up from sleep.....

So whenever I put put my screen dowm(the laptop is on) and after while i open my screen.
There are blinking black colored lights and after while a blue screen appears and says "There is a problem in the computer or installed drivers or in a update so windows is shuttig down to prevent the damage.....
Dumping files:125 (and so on)
after it reboots by itself the windows gives me message saying "There is a problem with ATI DISPLAY DRIVER"

Hi,
Please try the Microsoft fix:
http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/blue-screen-after-sleep-mode/...
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Blue screen after recovery

Similar Messages

Maybe you are looking for