Blue screen after removing system fonts

I recently was going through my fonts and wanted to clear out all of my downloaded ones and then install all of my organized ones...I removed all of my fonts on my computer and when emptying my trash my computer restarted and I got a blue screen. Unable to boot in safe mode and quite frustrated, any help would be great!

I do still have all of the fonts required and in addition I have not yet emptied the trash. The main problem is I can't log in...so, how can I archive and install?

Similar Messages

After removing system fonts and reinstalling fonts, FireFox will not start

After removing system fonts and reinstalling fonts, FireFox will not start! When I start FireFox the "Mozilla Crash Reporter" opens as if FF just crashed??? I don't see any records in event viewer. I am using FF v3.6.3 on a Windows 7 box. I tried uninstalling 3.6.3 and installing 3.0.18 and had the same problem!
== This happened ==
Every time Firefox opened
== After a uninstalled all fonts including system fonts and then reinstalling system fonts. ==
== User Agent ==
Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; Trident/4.0; GTB6.4; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729; .NET CLR 3.0.30729; Media Center PC 6.0; AskTB5.5)

The files with submitted crash report ids are inside the ''submitted '' directory, from the directory you found the LastCrash.txt timestamp file.
The file names will begin with '''bp-'''
There might be more information from the crash report, but it might just tell us you are crashing the first time Firefox tries to use a font.
One thing I suppose you could do is select only those fonts you've got in Tools -> Options -> Content -> Fonts and Colors -> Advanced and then uncheck the '''Allow pages to use their own fonts''' option.
See http://support.mozilla.com/en-US/kb/Options+window+-+Content+panel#Fonts_Dialog
To be honest, I can't find anything on this Netscape Font Navigator and it sounds highly dubious.

My Macbook will not boot the operating system. It just goes to a blue screen after the apple logo and the spinning wheel goes off. I took the battery out and held the on/off button for five seconds and reset the PRAM. I have the old mac os disk.

My macbook will not boot. It goes to a blue screen after the logo and wheel goes off. I have taken the battery out and held the on/off button for five seconds and reset the PRAM. I have the the original os disk but have not put it in for fear of losing un backed op data.
Thanks
Rich

You won't lose any data unless you erase your hard drive.
Put your install DVD into the optical drive and reboot. As soon as you hear the boot chime, hold down the "c"key on your keyboard (or the Option key until the Install Disk shows up). That will force your MacBook to boot from the install DVD in the optical drive.
When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it.When it comes up is your Hard Drive in the list on the left?
If it is then click on the Mac OS partition of your hard drive in the left hand list. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've selected the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions.

Blue screen after powering, scoped the forums, tried out all the suggestions, no luck

Really need your help guys!
Blue screen after powering
Imac alu, SL 10.6.8
Failed methods so far:
-repair disk permissions via external system or install DVD, no luck
-->message "Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired."
i know that Apple says the message can be ignored
-unplugging the imac of every peripheral device as well as power cord,
holding down the power switch for 10 sec.
-doing p-ram reset
-booting in safe mode, blue screen-->loading circle+blue screen--> no loading circle + blue screen---> loop phenomen
Do have any other suggestions?
When booting from an external hard drive, the icon of the internal hard drive on the desktop has got a lock now. Do you know what to make of that?
Thanks,
G.

Nevermind! Used suggestion from an older post and it worked!

Server 2012 R2 Hyper-V Cluster, VM blue screens after migration between nodes.

I currently have a two node Server 2012 R2 Hyper-v Cluster (fully patched) with a Windows Server 2012 R2 Iscsi target.
The VMs run fine all day long, but when I try to do a live/quick migration the VM blue screens after about 20 minutes. The blue reports back about a “Critical_Structure_Corruption”.
I’m being to think it might be down to CPU, as one system has an E-2640v2 and the other one has an E5-2670v3. Should I be able to migrate between these two systems with these type of CPU?
Tim

Sorry Tim, is that all 50 blue screen if live migrated?
Are they all on the latest integration services? Does a cluster validation complete successfully? Are the hosts patched to the same level?
The fact that if you power them off then migrate them and they boot fine, does point to a processor incompatibility and the memory BIN file is not accepted on the new host.
Bit of a long shot but the only other thing I can think of off the top of my head if the compatibility option is checked, is checking the location of the BIN file when the VM is running to make sure its in the same place as the VHD\VHDX in the
CSV storage where the VM is located and not on the local host somewhere like C:\program data\.... that is stopping it being migrated to the new host when the VM is live migrated.
Kind Regards
Michael Coutanche
Blog:
Twitter: LinkedIn:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Imac frozen at blue screen after i went into disk utilities and cleaned my free space. I tried holding down T key as it reboots and i get a message. Start up disk full empty it how can one emptie it if you cant get past the blue screen

Imac frozen at blue screen after i went into disk utilities and cleaned free space.
I tried holding down T key as it reboots
and i get a message. Start up disk full empty it how can one emptie it if you cant get past the blue screen?
to make matters worse we bought the IMAC of amazon uk on the 4/07/011 so what can we do?
please remember how frustrating it is when asking for help when the helper telling you to type something on the screen when its frozen
Tell us when you can type some instuctions to the software how do you get to the doss prompt so to speak to do this
Thanks

i tried all this thanks
i can not get past blue screen and message Your disk is full it needs to be emptied Please not I cant proceed past this message.
no matter what you tell me
Am i right ok in thinking that
when i went into disk utilities and chose to clean my free space i left it over one hour to do its stuff
i came back and there was no progress bar just the box so i quit the program and when i opened mac mail the system just froze i forced quit mail rebooted and blue screen death
Now when free space is being cleaned is it the same as windows dose the utility write lots of 0 on the hard drive then rebbot its self to free the space
basicly is my hard drive full of 00000 is this why im getting this message because the process was interupted
I need to know if i need outside help i bought the computer on line on amazon uk what dose one do next

Blue screen - after booting into Darwin/BSD

Hi,
after I had the problem of my iMac G5 only booting into Darwin/BSD (which I posted here: http://discussions.apple.com/thread.jspa?threadID=1093517&tstart=0), I followed the instructions for recreating the user accounts, as described here: http://discussions.apple.com/thread.jspa?threadID=320663&start=0&tstart=0
Now I'm able to get to the blue screen, and the system doesn't exit into Darwin/BSD any longer. However, the Setup Assistant doesn't start either.
I only see an empty blue screen (I guess it's the GUI base screen) and the menu bar. The menu bar only has to items: one menu 'loginwindow', which doesn't have any entries. And the Apple-logo menu, which has the following menu entries:
- About This Mac
- Software Update...
- Mac OS X Software...
- System Preferences...
- Dock >
- Location >
- Force Quit...
- Sleep
- Restart...
- Shot Down...
- Log Out System Administrator...
The 'Restart...' entry doesn't work. I can, however, launch the System Preferences window.
Tail command of /var/log/System.log shows:
configd[41]: WirelessConfigure: 88001003
kernel[0]: Registering For 802.11 Events
kerner[0]: [HCIController][setupHardware] AFH Is Supported
kernel[0]: ATY,Aphrodite2_A: vram [98000000:08000000]
mDNSResponder: Couldn't read user-specific Computer Name; using default bMacintosh-0014513219B8b instead
kernel[0]: ATY,Aphrodite2_B: vram [98000000:08000000}
mDNSResponder: Couldn't read user-specified local hostname; using default bMacintosh-0014513219B8.localb instead
/System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow: Login Window Application Started
loginwindow[141]: [Login.m:1867] Failed to launch /Applications/Server/Server Assistant.app/Contents/MacOS/Server Assistant (error -1)
mDNSResponder: Adding brows domain local.
Any recommendations on what to do next?
Thanks!
Torsten

Apologies, was a little vague. and as far as my profile goes i have loads of mac's here in the studio.
using MBP latest model, Snow Leopard with latest updates.
1. boot up in windows XP SP3 (bootcamp NTFS formatted 32GB partition) - all ok
2. shut down windows and re boot in OSX
3. boots up but fails to complete and hangs on blue screen (just prior to desk top picture loading)
4. press and hold power button to shut down
5. reboot in OSX - boots up fine this time

Blue Screen after clean reinstall snow leopard

I have a mid 2011 that came with Snow Leopard and disks. I upgraded from there to Lion - then whatever came next and to Mavericks and finally Yosemite, which was a nightmare for me. I did not use disks of any of the rest. So I just decided to take my disks and go back to Snow Leopard. I did this and it asked to go to disk utility and repair both the HD and Permissions. It came out ok, but there was an instance where looking at the list in HD repair, I saw Suid File System Library Core was moved and cannot be repaired. I went ahead and erased the Hard Drive. Then closed out and installed Snow Leopard. I'm not sure I did it right because I had to rename the new start up disk and typed in unnamed 1.
after that I was able to start up to Snow Leopard. It worked fine until I tried to download all the updates. Then it didn't seem to restart, but just went to the sign in screen. So I had to keep shutting down and turning it back on. No updates. One of times I started up, I got the blue screen after the apple and gray screen.
Also on start up the apple comes up without the chime. Last night I got some instructions from a similar situation and tried to use my disk to a clean reinstall all over. It didn't work, still the blue screen. (it does fine in safemode.)
I need help to get this mac running. If someone can help me......

Clean Install of Snow Leopard
Be sure to make a backup first because the following procedure will erase
the drive and everything on it.
     1. Boot the computer using the Snow Leopard Installer Disc or the Disc 1 that came
         with your computer. Insert the disc into the optical drive and restart the computer.
         After the chime press and hold down the "C" key. Release the key when you see
         a small spinning gear appear below the dark gray Apple logo.
     2. After the installer loads select your language and click on the Continue
         button. When the menu bar appears select Disk Utility from the Utilities menu.
         After DU loads select the hard drive entry from the left side list (mfgr.'s ID and drive
         size.) Click on the Partition tab in the DU main window. Set the number of
         partitions to one (1) from the Partitions drop down menu, click on Options button
         and select GUID, click on OK, then set the format type to MacOS Extended
         (Journaled, if supported), then click on the Apply button.
     3. When the formatting has completed quit DU and return to the installer. Proceed
         with the OS X installation and follow the directions included with the installer.
     4. When the installation has completed your computer will Restart into the Setup
         Assistant. After you finish Setup Assistant will complete the installation after which
         you will be running a fresh install of OS X. You can now begin the update process
         by opening Software Update and installing all recommended updates to bring your
         installation current.
Download and install Mac OS X 10.6.8 Update Combo v1.1.

Blue screen after update to 10.6.2

After i updated my iMac 24, it restarted, got past the grey screen with apple logo, then get's stock in the blue screen after that. I can move the mouse but that's it. I tried restarting en reset my PRAM, nothing. Then i disconnected everything extrenal, restarted after resetting PRAM again, nothing???
What do i have to do??????
Thanks for any help
Hans

Same issue as alembee. Clean install of 10.6. Installed Xcode from disk. Changed a few preferences. Got prompt of 10.6.2 update (plus iTunes and Remote access). When updates were installed, I was given the options to "restart now" or "restart later". I chose now. It looked like I was logged out, but the computer (original MBP Core Duo) stalled at the background nebula/aurora image. I could still move the mouse. Since I enabled ssh remote login, I tested it from another computer. Sure enough, I could login to the MBP and see all the processes running (top). I executed a "sudo reboot" to remotely restart the system.
I put in the 10.6 disc (held down "c") and went to Disk Utility. Ran Verify Permissions and Verify Disk for good measure (nothing wrong). I have upgraded the RAM and HD since purchase, but I don't see how this would be an issue. Since I was able to login remotely, it was seems to be an issue with proper logout and restarting.

Blue screen after start up; mouse still moves but no icons are visible

blue screen after start up; mouse still moves but no icons are visible. Removed SDRAM and reinserted the SDRAM

Thank you, I had forgotten about target mode. I was able to back up all of my files. I also copied some additional 50 GB of files of the disk as a stress test and the hard drive worked fine and quick (and because it was quicker than retrieving the same files from a network drive to my desktop).
I was hoping to also unpack the Applejack files on my desktop and put them back so I could run them in single user mode without running /etc/rc. However I haven't been able to get my Linux desktop to mount the iBook in Read-Write instead of Read-Only yet (I don't have access to another Mac at the moment).

Blue Screen after enabled BitLocker in Windows 8 Pro

Blue screen after starting Windows 8 Pro (not RTM version) after I enabled the BitLocker and after restarting Windows.
Yes the Laptop have TPM, en is no update of Windows 8, its new instal for Windows 8 Pro
Notebook: HP EliteBook 8560p 16Gb memory.

Dear Customer,
Welcome and thank you for posting your query on HP Support Forum.
Please update the BIOS firmware and that will fix the issue.
Please click on the below link to download and update the BIOS
http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5056950&sp...
I must inform you that these services are not endorsed by HP, and that HP is not responsible for any damage that may arise to your system by using these services. Please be aware that you do this at your own risk.
Hope this helps, for any further queries please reply to the post and feel free to join us again.
**Click the KUDOS star on left to say Thanks**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.
Thank You,
SJ_Bradley
I am an HP Employee.

Blue screen after Error 37: a bad filename or volume was encountered

I get a PAGEFAULT_IN_NONPAGEDAREA blue screen after I encounter multiple Error 37: a bad filename or volume was encountered.
Anyone encounter this issue and how to you send info to apple for them to fix their buggy code?
Their support of code which will run bug-free on vista seems to be lacking (I understand there are two parties to this marriage).
Help anyone?

I noticed a few days ago that (at least on my box) Quicktime seems to have "issues" with >31 characters anywhere in the file path.
Is it possible that you have some folder along the way to your movie that has more than 31 charaters?
Shorten if necessary and see if that works.
dual 2.7 G5 Mac OS X (10.4.5)

TS3274 My iPad mini retina is still having random reboots with blue screen after updating to iOS 8.0.2.i also did reset my iPad.But the problem still persis

My iPad mini retina is still having random reboots with blue screen after updating to iOS 8.0.2.i also did reset my iPad.But the problem still persists

Could you add your problem here: https://discussions.apple.com/thread/6569052? This makes sure the discussion and in one place and we can attract more attention from Apple.

Is anyone else experiencing their phone randomly locking up and going to a blue screen after the most recent update?

iPhone 5s Random Blue Screen after last Update

I have had 9 iOS devices either just show the apple log and go black or a dead battery even thou they were on the chargers for hours.
I brought them to the Apple store. No one could give me an answer as to why it did it. All you have to do to fix it is do this:
To put your device into recovery mode, follow these steps:
Turn off your device and leave it off.
Plug in your device's USB cable to a computer with iTunes.
Hold down the Home button on your device as you connect the USB cable. ...
When you see this screen, release the Home button.
From the consensus of the people in my office that did the iOS 8.3 update. The ones that did the update while the iPhone or iPad was on a charger are not experiancing any issues. The ones that did the update without being on a charger are the ones experianceing the issues at hand.

My laptop become blue screen after windows logo, after i update the graphic ati and intel driver

I have constant blue screen after windows logo and i have updated all drivers. i was upset the blue screen didn't go away and i did the factory reset. For my suprise, it didn't solve the problem and then i repair it at the comp shop. it was installed with windows 7 home premium 64 (pavilion g4 1006tx) bit as the pre installed windows and activated with the key back on sticker. I updated all drivers and i noticed every time i update the ati and intel driver it will go blue screen after windows logo. after i uninstall it at in safe mode it can load normally. My question is there any solution for my graphic card or is it already damaged? or any other hardware problem? please because i have to use high graphic as i use photoshop

hii
make sure you download and update correct driver version of graphic
and know spec
more:
http://support.hp.com/us-en/drivers/selfservice/HP-Pavilion-g4-Notebook-PC-series/5046252/model/5068...
try to instal "AMD High-Definition Graphics Driver" only
and uninstal "Intel High-Definition (HD) Graphics Driver"
Wisnu Suryandi

Blue screen after removing system fonts

Similar Messages

Maybe you are looking for