Blue screen after save reboot

hi,
in the middle of work my imac suddenly showed vertical grey / white bars all over the screen.
I reboot with shift key pressed. imac shoes grey screen with apple logo, then the grey progression bar, then blue screen with very small sized vertical dark blue / black bars. is this a hint to graphic card defect?
my imac is a 27" 3,4 ghz quadcore, 16 gb ram, ssd harddrive, os 10.8.x

Take the machine in for service.
We can't help you with that issue.
Good luck.

Similar Messages

TS3274 My iPad mini retina is still having random reboots with blue screen after updating to iOS 8.0.2.i also did reset my iPad.But the problem still persis

My iPad mini retina is still having random reboots with blue screen after updating to iOS 8.0.2.i also did reset my iPad.But the problem still persists

Could you add your problem here: https://discussions.apple.com/thread/6569052? This makes sure the discussion and in one place and we can attract more attention from Apple.

Imac frozen at blue screen after i went into disk utilities and cleaned my free space. I tried holding down T key as it reboots and i get a message. Start up disk full empty it how can one emptie it if you cant get past the blue screen

Imac frozen at blue screen after i went into disk utilities and cleaned free space.
I tried holding down T key as it reboots
and i get a message. Start up disk full empty it how can one emptie it if you cant get past the blue screen?
to make matters worse we bought the IMAC of amazon uk on the 4/07/011 so what can we do?
please remember how frustrating it is when asking for help when the helper telling you to type something on the screen when its frozen
Tell us when you can type some instuctions to the software how do you get to the doss prompt so to speak to do this
Thanks

i tried all this thanks
i can not get past blue screen and message Your disk is full it needs to be emptied Please not I cant proceed past this message.
no matter what you tell me
Am i right ok in thinking that
when i went into disk utilities and chose to clean my free space i left it over one hour to do its stuff
i came back and there was no progress bar just the box so i quit the program and when i opened mac mail the system just froze i forced quit mail rebooted and blue screen death
Now when free space is being cleaned is it the same as windows dose the utility write lots of 0 on the hard drive then rebbot its self to free the space
basicly is my hard drive full of 00000 is this why im getting this message because the process was interupted
I need to know if i need outside help i bought the computer on line on amazon uk what dose one do next

Security Suite Blue Screen after reboot

I am a new customer for verizon fios and have installed/uninstalled the security suite several times. I am using Windows XP. I get the blue screen after reboot no matter what I do. It goes away as soon as I uinstall or choose last known good windows install (using F8 key during reboot). Is there a known issue.

#1 On the blue screen, was their text?
#2 If so, what did it say?
#3 Make sure that you do have another software firewall installed (other than one built into Windows).
b) But the one in Windows, you should disable.
#4 Make sure that you do have another anti-virus program installed.
If you are the original poster (OP) and your issue is solved, please remember to click the "Solution?" button so that others can more easily find it. If anyone has been helpful to you, please show your appreciation by clicking the "Kudos" button.

My Macbook will not boot the operating system. It just goes to a blue screen after the apple logo and the spinning wheel goes off. I took the battery out and held the on/off button for five seconds and reset the PRAM. I have the old mac os disk.

My macbook will not boot. It goes to a blue screen after the logo and wheel goes off. I have taken the battery out and held the on/off button for five seconds and reset the PRAM. I have the the original os disk but have not put it in for fear of losing un backed op data.
Thanks
Rich

You won't lose any data unless you erase your hard drive.
Put your install DVD into the optical drive and reboot. As soon as you hear the boot chime, hold down the "c"key on your keyboard (or the Option key until the Install Disk shows up). That will force your MacBook to boot from the install DVD in the optical drive.
When it does start up, you'll see a panel asking you to choose your language. Choose your language and press the Return key on your keyboard once. It will then present you with an Installation window. Completely ignore this window and click on Utilities in the top menu and scroll down to Disk Utility and click it.When it comes up is your Hard Drive in the list on the left?
If it is then click on the Mac OS partition of your hard drive in the left hand list. Then select the First Aid Tab and run Repair Disk. The Repair Disk button won't be available until you've selected the Mac OS partition on your hard drive. If that repairs any problems run it again until the green OK appears and then run Repair Permissions.

Has anyone else experienced blue screens and continuous reboots on 5S

I picked up my silver 5S 32 GB at the Verizon store Friday morning. Throughout the morning I noticed that I would hit the home button and it would be powered down. I loaded the .1 patch assuming maybe it was a glitch. I went through the rest of the day with a couple more home button/powered down situations. When I got I home, I plugged it in to iTunes to recover a backup and following the restore it went into blue screen reboot cycle. I performed the soft reset and restored the backup 3 times with the same results. The soft reset was the only means to stop the reboot cycle. I then tried 3 times doing a restore from the cloud with the exact same results. Finally I did a from scratch install thinking my backups were bad. It would stay up awhile but then eventually go into the blue screen and reboot. Sometimes the cycle wouldn't occur in that it would boot up to Home screen following the blue screen. I took the phone to the Apple store the next day, they looked it over, witnessed the blue screen and confirmed there was an issue. I then went to the Verizon store and swapped it for a Space Grey 32GB. I experienced the exact same cycle with the grey so I called Apple. I have spent 3+ hours working through this with a very helpful agent. Turns out a have 2 bad ones in a row! The way I can almost instantly get it to go to blue screen is clicking the Photos icon. Now I am waiting on a second replacement at the Apple store. We have done the soft reset, the hard reset, and the phone restore so we know now that the backup had nothing to do with it as I can do a restore and still have it blue screen after clicking Photos. Anyone seeing anything like this?

Searching for others who might have the same problem increases your chance of finding a solution. Common sense in troubleshooting devices dictates you look for others who might have the same problem in hopes someone already has a solution. Your comment is irrelevant and leads one to think you are spoiling for an argument. Why???

Blue Screen After Waking up from sleep.....

So whenever I put put my screen dowm(the laptop is on) and after while i open my screen.
There are blinking black colored lights and after while a blue screen appears and says "There is a problem in the computer or installed drivers or in a update so windows is shuttig down to prevent the damage.....
Dumping files:125 (and so on)
after it reboots by itself the windows gives me message saying "There is a problem with ATI DISPLAY DRIVER"

Hi,
Please try the Microsoft fix:
http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/blue-screen-after-sleep-mode/...
Good luck.
BH
**Click the KUDOS thumb up on the left to say 'Thanks'**
Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Blue screen after upgrades - 3000 J115 7387-A32

I recently upgraded the graphics card and memory on my Lenovo 3000 J115 7387-A32. After the memory upgrade I noticed that when the computer booted it would 1) go to the blue screen, 2) automatically reboot, 3) boot normally to windows vista.
I upgraded the Graphics Card from an onboard Nvidia 6100 to an Nvidia 8500 GT pci expressI completed this upgrade a couple days prior to the memory upgrade and noticed no issues when booting the computer.
I upgraded from 1 gig (2 x 512 mb) of memory to 4 gigs (2 x 2g) ddr2I did notice that the bios system summary notes the memory as 2.5g while the vista - control panel - system notes 4g, but based on the other posts that seems to be a 32-bit OS limitation and should not be causing the blue screen.
After the computer boots normally, it acknowledges that it did not boot properly and offers to find a solution. It notes that the problem is due to the NVIDIA nforce serial ATA driver (which as far as I can tell is not related to either graphics card?) and takes me to the NVIDIA site. I scan my system for both graphics and motherboard, and the results of both scans are that I have the most up to date drivers available.
I did update my bios through this process.
It does eventually boot up and seems to be working fine, but the blue screen shouldn't occur and I would like to prevent it if I can. I would appreciate any help on this issue.

what are you specs cause i also had some bluie screen errors b4 ( didnt upgrade anything at that point)..and btw i am also looking for an upgrade on a graphics card...i found couple but i have no clue how much my lenovo 7387 can handle (in terms of power supply) can you please help me out here...
Thanks
DjAquarain
AMD Athlon 64 x2 3800+
2gb ram
windows xp
500 gb hd.
Nvidia 6100 (integrated)

Blue screen after update to 10.6.2

After i updated my iMac 24, it restarted, got past the grey screen with apple logo, then get's stock in the blue screen after that. I can move the mouse but that's it. I tried restarting en reset my PRAM, nothing. Then i disconnected everything extrenal, restarted after resetting PRAM again, nothing???
What do i have to do??????
Thanks for any help
Hans

Same issue as alembee. Clean install of 10.6. Installed Xcode from disk. Changed a few preferences. Got prompt of 10.6.2 update (plus iTunes and Remote access). When updates were installed, I was given the options to "restart now" or "restart later". I chose now. It looked like I was logged out, but the computer (original MBP Core Duo) stalled at the background nebula/aurora image. I could still move the mouse. Since I enabled ssh remote login, I tested it from another computer. Sure enough, I could login to the MBP and see all the processes running (top). I executed a "sudo reboot" to remotely restart the system.
I put in the 10.6 disc (held down "c") and went to Disk Utility. Ran Verify Permissions and Verify Disk for good measure (nothing wrong). I have upgraded the RAM and HD since purchase, but I don't see how this would be an issue. Since I was able to login remotely, it was seems to be an issue with proper logout and restarting.

Blue screen after shutting down

Hello, I'm have this issue with my Toshiba satellite. When I go to shut it down it goes to a blue screen that's saying it has encountered a error and etc and then at the bottom it says dumping files etc and the the computer will reboot back to the start up screen. I have sent it in for repair and they replaced the mother board and when I got it back it works for a while then it goes back to the something. So I updated the windows and then I have it start not wanting to start up so I was told but a Toshiba tech to do a total reboot which I did. It started working without any problems until I update windows then it starts going back to the blue screen after shutdown. Any got any ideas on how to fix this ? thanks trey

hi.. i have also a problem about bluescreen problem.. it occurs while using the laptop. the laptop is a satellite A305-S6837. heres what its says..
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.0.6002.2.2.0.768.3
Locale ID: 1033
Additional information about the problem:
BCCode: a
BCP1: 0000096C0000007E
BCP2: 0000000000000002
BCP3: 0000000000000001
BCP4: FFFFF800026B1443
OS Version: 6_0_6002
Service Pack: 2_0
Product: 768_1
Files that help describe the problem:
C:\Windows\Minidump\Mini020910-01.dmp
C:\Users\Owner\AppData\Local\Temp\WER-113662-0.sysdata.xml
C:\Users\Owner\AppData\Local\Temp\WER93E5.tmp.version.txt
and then when i used your bluescreenview, here what is says:
Mini020910-01.dmp
2/9/2010 5:39:13 PM
IRQL_NOT_LESS_OR_EQUAL
0x0000000a 0000096c`0000007e 00000000`00000002 00000000`00000001 fffff800`026b1443 ntoskrnl.exe ntoskrnl.exe+5a450 x64 C:\Windows\minidump\Mini020910-01.dmp 2 15 6002
and at the bottom part:
ntoskrnl.exe ntoskrnl.exe+5a1ee fffff800`0264d000 fffff800`02b65000 0x00518000 0x4a7801eb 8/4/2009 5:39:55 PM
please help me to configure the problem.. thank you

Blue screen after Error 37: a bad filename or volume was encountered

I get a PAGEFAULT_IN_NONPAGEDAREA blue screen after I encounter multiple Error 37: a bad filename or volume was encountered.
Anyone encounter this issue and how to you send info to apple for them to fix their buggy code?
Their support of code which will run bug-free on vista seems to be lacking (I understand there are two parties to this marriage).
Help anyone?

I noticed a few days ago that (at least on my box) Quicktime seems to have "issues" with >31 characters anywhere in the file path.
Is it possible that you have some folder along the way to your movie that has more than 31 charaters?
Shorten if necessary and see if that works.
dual 2.7 G5 Mac OS X (10.4.5)

Blue screen after powering, scoped the forums, tried out all the suggestions, no luck

Really need your help guys!
Blue screen after powering
Imac alu, SL 10.6.8
Failed methods so far:
-repair disk permissions via external system or install DVD, no luck
-->message "Warning: SUID file "System/Library/CoreServices/RemoteManagement/ARDAgent.app/Contents/MacOS/ARDAg ent" has been modified and will not be repaired."
i know that Apple says the message can be ignored
-unplugging the imac of every peripheral device as well as power cord,
holding down the power switch for 10 sec.
-doing p-ram reset
-booting in safe mode, blue screen-->loading circle+blue screen--> no loading circle + blue screen---> loop phenomen
Do have any other suggestions?
When booting from an external hard drive, the icon of the internal hard drive on the desktop has got a lock now. Do you know what to make of that?
Thanks,
G.

Nevermind! Used suggestion from an older post and it worked!

Server 2012 R2 Hyper-V Cluster, VM blue screens after migration between nodes.

I currently have a two node Server 2012 R2 Hyper-v Cluster (fully patched) with a Windows Server 2012 R2 Iscsi target.
The VMs run fine all day long, but when I try to do a live/quick migration the VM blue screens after about 20 minutes. The blue reports back about a “Critical_Structure_Corruption”.
I’m being to think it might be down to CPU, as one system has an E-2640v2 and the other one has an E5-2670v3. Should I be able to migrate between these two systems with these type of CPU?
Tim

Sorry Tim, is that all 50 blue screen if live migrated?
Are they all on the latest integration services? Does a cluster validation complete successfully? Are the hosts patched to the same level?
The fact that if you power them off then migrate them and they boot fine, does point to a processor incompatibility and the memory BIN file is not accepted on the new host.
Bit of a long shot but the only other thing I can think of off the top of my head if the compatibility option is checked, is checking the location of the BIN file when the VM is running to make sure its in the same place as the VHD\VHDX in the
CSV storage where the VM is located and not on the local host somewhere like C:\program data\.... that is stopping it being migrated to the new host when the VM is live migrated.
Kind Regards
Michael Coutanche
Blog:
Twitter: LinkedIn:
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.

Is anyone else experiencing their phone randomly locking up and going to a blue screen after the most recent update?

iPhone 5s Random Blue Screen after last Update

I have had 9 iOS devices either just show the apple log and go black or a dead battery even thou they were on the chargers for hours.
I brought them to the Apple store. No one could give me an answer as to why it did it. All you have to do to fix it is do this:
To put your device into recovery mode, follow these steps:
Turn off your device and leave it off.
Plug in your device's USB cable to a computer with iTunes.
Hold down the Home button on your device as you connect the USB cable. ...
When you see this screen, release the Home button.
From the consensus of the people in my office that did the iOS 8.3 update. The ones that did the update while the iPhone or iPad was on a charger are not experiancing any issues. The ones that did the update without being on a charger are the ones experianceing the issues at hand.

My laptop become blue screen after windows logo, after i update the graphic ati and intel driver

I have constant blue screen after windows logo and i have updated all drivers. i was upset the blue screen didn't go away and i did the factory reset. For my suprise, it didn't solve the problem and then i repair it at the comp shop. it was installed with windows 7 home premium 64 (pavilion g4 1006tx) bit as the pre installed windows and activated with the key back on sticker. I updated all drivers and i noticed every time i update the ati and intel driver it will go blue screen after windows logo. after i uninstall it at in safe mode it can load normally. My question is there any solution for my graphic card or is it already damaged? or any other hardware problem? please because i have to use high graphic as i use photoshop

hii
make sure you download and update correct driver version of graphic
and know spec
more:
http://support.hp.com/us-en/drivers/selfservice/HP-Pavilion-g4-Notebook-PC-series/5046252/model/5068...
try to instal "AMD High-Definition Graphics Driver" only
and uninstal "Intel High-Definition (HD) Graphics Driver"
Wisnu Suryandi

Blue screen after save reboot

Similar Messages

Maybe you are looking for