Blue screen and and fuzzy

This has started recently and I can't get rid of it,    On start up there are red lines down the page and the windows logo is fuzzy then when we log into anything, there is a permanent blue background, a light blue, gives me a headache after a while and I cannot get rid of it. 
Any help greatly appreciated.

Try seeing if the display to an external monitor is the same or if that is clear. If the external display is good, then the weird screen means the display panel needs to be replaced, which we can help you do. If the picture is also bad on an external monitor it means the motherboard is going bad which is much more difficult to remedy. Hook up a regular external computer monitor to the external monitor port on the laptop and hit the Windows + p keys and you can select the laptop screen and the monitor or just the monitor. 

Similar Messages

  • My iPhone would just randomly give me a blue screen and then restart--did that a bunch of times between Tuesday and last night. As of last night, it WILL NOT come back on. iTunes says it's in recovery mode....what does all of this mean???

    Tuesday night I was texting a friend and when I went to open her message, my screen went blue and restarted. I just wrote it off as weird and went on about my business. Later that night, I tried to turn on my phone and it would not turn on. I plugged it up, held down the power button, and pressed the home button all numerous times. I looked online and it said to do a "hard reset" by holding down the power and home button at the same time--my phone then came on. Throughout Wednesday, it would give me a blue screen and restart--nothing major just really annoying. I took it to the local Verizon store where I bought the phone from and he said that it was some type of hardware defect and I was still under my year warranty so I could get a new one for free--the free phone won't be here until tomorrow, Saturday. I took it home and it didn't give me any trouble for a couple of hours. The next day it was cooperating and then I left town for a little while and it acted up (blue screen and then restarting) a few times. When I got home, it acted up again and so I restarted the phone and it was working fine. A few minutes later, I tried to check my messages and the phone was off again. No matter what I do, my phone will not come back to life. It had at least 45% battery last time I looked at it. I decided to plug the phone up to my computer and see what it did--my computer recognizes that there is a phone hooked to it and it says that it's in "recovery mode". It also said that if I'm having issues with my phone, that I need to reset the phone via iTunes. I guess the questions that arise are
    1. Why is my phone doing this?
    2. If I reset my phone, will it go back to working again? I ask that because I don't want Verizon to charge me $300 when they send me the replacement phone and I won't need it (assuming that the phone decides to work once it's been reset).
    3. What type of hardware defect is this that is causing this issue, not only with my iPhone 5S but others as well?
    4. Shouldn't people be notifying Apple and letting them know that they need to fix this issue?
    5. Should I report this issue to Apple even though I didn't buy the phone directly from them, but through Verizon?
    Any help that anyone could give me would be greatly appreciated! This whole situation has me stressed out and seriously confused.

    Hi, beth.lau.gr.
    Thank you for visiting Apple Support Communities.  
    I understand you have been experiencing issues with your iPhone restarting and showing you a blue screen.  I wont be able to give you an exact answer as to why this is happening.  However, this is the most relevant troubleshooting article for this issue.  This article also provides options to reach out to us via phone for additional assistance.  
    If your iOS device restarts, displays the Apple logo, or powers off while you're using it
    http://support.apple.com/en-us/HT203899
    Cheers, 
    Jason H.  

  • On startup Mac Pro I get a blue screen and a cursor on the upper left. The mouse cursor shows up independently. Is it likely a video card failure?

    On startup Mac Pro I get a blue screen and a cursor on the upper left. The mouse cursor shows up independently. Is it likely a video card failure?

    I managed to boot the computer and get the desktop to show. I now have a "repaired" computer. There are several problems that have cropped up. One is that I can only start up now in Safe Boot mode. Is there a way to turn it off? Also, I do not have a sound list, so I can't access anything requiring audio. Google Chrome only shows up as a white screen. Pictures that loaded before don't load in browsers, etc. Any suggestions? I figure I should reinstall Mac OS Lion for starts, maybe even do a mirror backup and reformat the drive. I think this drive has turned into scrambled eggs...what a headache!

  • Mid 2010 MacBook Pro: Will randomly blue-screen and Safari repeatedly crashes.

    I bought my MacBook Pro in June/July of last year, and it has worked perfectly fine up to this point. However, for the past 2 months or so, my computer will randomly go to a blue screen and log me out. Also, Safari will crash several times (it had never crashed on me until the blue-screen problem started. Both of these issues surfaced at the same time). For the most part, the blue-screening problem only happens when I'm using the internet, but sometimes it will happen when I am offline as well. This is an infrequent/inconsistent problem, though. It will blue-screen and Safari will crash one week, but then it will be perfectly fine for the next three or four weeks. What's wrong/how do I fix it?

    Hi JRC8.8,
    It sounds like you have been on the right track in trying to troubleshoot this issue. You may want to see if your MacBook Pro will boot directly to the Apple Hardware Test, as outlined in the following article:
    Apple Support: Using Apple Hardware Test
    http://support.apple.com/kb/ht1509
    Regards,
    - Brenden

  • My MacBook Pro is now asking for a login. When I enter my passcode, it goes to a blue screen and back to the login screen. I saw several older posts, but nothing recently. I am running Snow Leopard.

    My MacBook is now asking for a password. When I login, it loops to a blue screen, and back to the login. Incorrect logins create a shaking of the login screen. I tried restarting with the shift key depressed, with no luck.

    I performed a hard shutdown, and upon start I could access my system without logging on. I'm not sure what caused the issue, but I have not booted up in almost a week.

  • G4 has blue screen and I still can't get it to login...HELP!

    I went to the store and when I returned I had a blue screen with my mouse pointer that could move. I read tons of post on here and tried everything such as resetting PRAM, bought a new battery because like threads said, I too would push the power button and it would flicker and not turn on. I would have to unplug the power cord just to be able to get another try. If I didn't, nothing happened. So then I borrowed my Aunt's Leopard CD she had from her iMac and tried booting off it (holding down the C button) and nothing. I get a message stating that I can't boot off of that disc? After letting it sit for a few hours I was finally able to get past the blue screen and access Disk Utility. I tried repairing the disc (i have 3 plus the backup drive) and I get past that. I then select Verify Disk Permissions and get a "FIRST AID FAILED" Message saying Disk Utility stopped repairing permissions on "HD" because the following error was encountered. The underlying task reported failure on exit. So then I run across a thread saying that it could possibly be a admin user or password problem. I remember just before the blue screen that I was indeed researching on how to lock a folder on my desktop as well as my back up drive. So I followed the instructions and powered it on while holding the apple key + S key and typed in mount -uw /
    rm /car/db/.AppleSetupDone
    shutdown -h now
    Now when I turn it on it starts up just like its brand new. However, I can't get past the part where it ask if I want to transfer information from another computer or Hard Drive or do it later with Migration Assistant. I have tried starting it and holding down the C key and nothing happens - I get the gray Apple screen frozen. I have held down the Option Key and restarted and selected both the HD and Start Up Disk which both have a little blue X in the corner if that helps and same results. Before trying to start up using the disc i forgot to mention I tried restarting it pulling each of the RAM drives out and putting them in different locations and that did nothing. And FINALLY! The last restart prior to posting this I have a bunch of lines across the Purple Galaxy Screen that says:
    System Failure: cup=0; code=00000001 (Corrupt Stack).
    Latest crash info for cpu 0:
    Exception state (sv0x29d85280)
    Backtrace terminated - frame not mapped or invalid:
    Any ideas from here?

    Whoah boy, lots of things here and I have to make supper...
    I'll choose a few at a time. "RAM drives"
    RAM drives? Do you mean hard drives? Do you mean RAM chips?
    If hard drives, did you put them back in the same order? Multiple hard drives in one machine often need to be jumpered correctly when you move them about.
    If chips... It's too difficult at this stage to tell if it is hardware or software. If hardware it could be chips, and that error at the end had a vague chip ring to it. One way to test for chips if you have extra chips is to pull all but the minimum required to boot and see if it boots.
    You mention a backup drive. This wouldn't happen to have a clone of the operating system on it would it?
    4 drives... All internal?
    From all you've said it could be hardware or software. Blue screen could be software but failing hardware can corrupt a drive, messing up the software.
    Boot discs. It sounds like you have no boot discs (CD. DVD) for this computer, right?
    What computer are you using right now?

  • Hi, my iphone its in recovery mode and when i restore my iphone 5s loading show the blue screen and show note on itunes (unknown error 14) please i need your help please . thanks

    Hi, my iphone its in recovery mode and when i restore my iphone 5s loading show the blue screen and show note on itunes (unknown error 14) please i need your help please . thanks

    In the article Resolve iOS update and restore errors this is what it says about error 14:
    Check your USB connections
    Related errors: 13, 14, 1600, 1601, 1602, 1603, 1604, 1611, 1643-1650, 2000, 2001, 2002, 2005, 2006, 2009, 4005, 4013, 4014, or “invalid response."
    If the USB connection between your device and computer is interrupted, you may be unable to update or restore.
    To narrow down the issue, you can also change up your hardware:
    Use the USB cable that came with your device, or a different Apple USB cable.
    Plug your cable into a different USB port directly on your computer. Don't plug it into your keyboard.
    Try a different computer.
    If necessary, resolve any further issues with the USB connection, then with your security software.
    If you're still seeing the error message, check for hardware issues by following the next section.

  • MacBook Pro hanging with blue screen and spinner after installing Software Update

    Hi I was wondering if someone could help me with this current issue. Just a few hours ago I finished reinstalling Mac OS X Snow Leopard in my MacBook Pro. I performed a clean installation as part of a yearly spring cleaning that I do on all my systems to keep them optimized. So there was I downloading some software updates which included the combo update of OSX 10.6.8 and others. The updates finished downloading and the system logged out to install the updates, when the updates finished installing my MacBook proceeded by logging out into a blue screen and show a gray spinner similar to the one seen when you start your Mac. Here's the problem after 2 hours the system is showing the spinner and the blue screen, I think that my computer has just hanged in the reboot process.
    I was wondering what should I do? Do a force restart? Or leave it overnight?
    Also, where can I find any information on what error is causing this issue?
    I appreciate your responses and help.
    By the way, I installed Mac OS X from a USB stick that has the original image of the disk installer that came bundled with my computer.

    Kappy wrote:
    Force a shutdown. Do not restart yet, but first do the following:
    Repair the Hard Drive
    Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
    If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
    Next, boot into Safe Mode then restart normally.
    Hi Kappy,
    Checked the hard drive after forcing a shutdown and booting from my Snow Leopard Installer USB Key and the status of the HDD says "Verified". I ran the repair and the volume was repaired successfully. Clicked on "Verify Disk" and it says "Macintosh HD appears to be OK". So I ran a second repair and again no errors were reported.
    As suggested I booted back again in Safe Mode and restarted normally. All software appears to have been installed successfully. But I don't understand why my computer hanged and showed the spinner after installing the updates in the blue screen that appears just before rebooting. I am aware that the system shows that spinner after a OS update but the longest it lasts is 30 seconds at the most in my previous cases.

  • Blue screen of death, and continous reboot.  Phone never actually boots up, just keeps going from reboot to blue screen and back again.  Any suggestion?

    Blue screen of death, and continous reboot.  Phone never actually boots up, just keeps going from reboot to blue screen and back again.  Any suggestion?

    Hello jared1915
    If you are stuck in that loop, the next step would be to restore your iPhone. Check out the article below to get your iPhone into recovery-mode and restore it in iTunes.
    If you can't update or restore your iOS device
    http://support.apple.com/kb/HT1808
    Regards,
    -Norm G.

  • Blue screen of death? I just updated my MacBook Air with the latest OX (25 Jun 11). When I restart - I get the Apple logo and then a blue screen and nothing else. Help!!!

    Blue screen of death? I just updated my MacBook Air with the latest OX (25 Jun 11). When I restart - I get the Apple logo and then a blue screen and nothing else. Help!!!

    Insert the install disk and press c on startup. Select your langauge then, if there's a menubar click utilities then click Disk Utility. If you didn't see the menubar continue with the installer until you see it.
    Once in disk utitly select the drive and repair permissions.
    After the repair is done, quit the utiltiy.
    You can try to reboot and see if it works if you reboot, but if it doesn't repeat the same as before again.
    Now you can continue with the installer and install the os.
    Quit

  • My ipad showed a blue screen and shut down.

    My ipad showed a blue screen and shut down.  I cannot restart it.  A soft restart did not work.  I tried connecting to iTunes on the PC but it did not detect the device

    Did you try resetting the iPad?
    Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears- let go of the buttons.
    If that doesn't do anything, try this for the issue with iTunes not seeing the iPad.
    iOS: Device not recognized in iTunes for Windows - Support - Apple

  • I have a MacBook Pro, it recently started freezing upon startup. It would get to a blue screen and just sit there. I've tried booting in safemode to run disk repair and still doesnt help. If I do manage to get past the blue screen, it still freezes

    My mac keeps freezing upon startup. It will get to the blue screen and promptly freeze. If I manage to get past the blue screen, and open up youtube on google chrome, it will freeze before it loads youtube. I've tried safeboot and disk repair, nothing seems to work. I even tried to factory reset it but it wont connect to my internet when I reboot with power + option.. any ideas?

    This can be used to boot the machine and delelte enough files to get it to boot normally.
    .Create a data recovery/undelete external boot drive
    Read about storage drive so you can store your extra stuff.
    Most commonly used backup methods
    Also here to see how a full boot drive slows the machine down
    Why is my computer slow?

  • After login I get a blue screen and then back to login window, but only for one account

    When one of the users on the iMac tries to login it goes to a blue screen and back to the login window.  This only happens with one of the users - I've tried doing a safe boot, running disk utility, and using Time Machine to restore the user's libray back to pre-problem timetable.  When I run repair permissions I do gt a SUID file "usr/sbin/vpnd" and "usr/sbin/pppd" have been modified.  Any ideas?

    Try this...
    http://reviews.cnet.com/8301-13727_7-20013630-263.html
    If that doesn't help I'd make a new user & use an admin account to move the old folders over & change rights to the new user.

  • I have an iphone 5s and my phone was working perfectly fine then it turn into a blue screen and after that i tried to restore it but when i do the phone does half of the steps and then it turns into a blue screen and it doesnt work again what can i do?

    i have an iphone 5s and my phone was working perfectly fine then it turn into a blue screen and after that i tried to restore it but when i do the phone does half of the steps and then it turns into a blue screen and it doesnt work again what can i do?

    The Basic Troubleshooting Steps are:
    Restart... Reset... Restore from Backup...  Restore as New...
    Malvinfromny wrote:
    ... i tried to restore it but when i do the phone does half of the steps and then it turns into a blue screen and it doesnt work again what can i do?
    If you try all these Steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step... Be sure to make an appointment first...

  • My computer has more than one login. Now when I log out it just brings up a blue screen and won't let me do anything eles. What's wrong with it?

    Now it just brings up a blue screen and it won't
    Let me do anything eles. What's wrong with it. This is the second time it's done it today

    I am experiencing the same thing on log out, not all the time but too often. I can get going again by shutting down with the power button, waiting 10 sec. then pressing the power button to boot up again. I have run Disk Utilities, Techtool Deluxe and Disk Warrior which all indicate everything is OK. So I am hoping someone will be able to help us with this issue.

  • I have a PB G4 that won't start. It shows the gray apple screen, shows the blue screen, and then the screen goes black, and "sleep" light pulses.

    I have a PB G4 that won't start. It shows the gray apple screen, shows the blue screen, and then goes black. The sleep light pulses. From there, I can't turn it off normally. I have tried restarting the PMU. And I have tried unplugging the ac adaptor and removing the battery. From there I have plugged only the ac adaptor in, and it will begin to start but do the same thing once it shows the blue screen.
    I tried only using the battery (without plugging in the ac adaptor) and the same thing happens. I tried starting the computer while holding down CTRL, Option, P, and R, waiting to hear the start up chimes 3 times, and then holding Shift as it starts up. But I still get the black screen once I see the blue one, and the computer's sleep light pulses.
    I need something very important from this computer. And was able to start it last night. I did not shut down the computer, and was going to take it to a friends to use his printer today. The computer was in sleep mode in the morning.
    Thanks for any help!
    Gina

    What your describing could be a logic board or memory issue. 
    You did or did not hear 3 startup chimes?  If you hear 3 chimes when you start it, that would indicate a memory problem.  Try reseating the memory to see if that makes a difference. If you have 2 RAM cards, try one then the other in each slot. If you have 1 RAM card, move it to the other slot. Powerbooks can develop one bad slot.
    You may need to pull the hard drive out of the Powerbook, put it into an external case, then read it from another mac.

Maybe you are looking for

  • I have two users with different music on each itunes and i can only use one library, how do i use both for one iTouch?

    i have two users with different music on each itunes and i can only use one library, how do i use both for one iTouch?

  • Changing fonts in Themes

    I'm using Themes 1.0, the light one. I like the font but want to change the default size (to 14) and make the text black (instead of dark grey). Is there any way to change the defaults instead of having to block and change manually on each page? TIA

  • How to install/uninstall multiple packages from a list

    Is there any way to install/uninstall multiple packages written in file? E.g. I have text file with content: packageA packageB packageC And I want use something like "pacman -S <<< file-with-packages". I know, I can get these files on one line and pa

  • Website suddenly goes to right of design view

    I don't know what i've done, but when i saved a webpage to a new folder and chose to update the links, the whole page now appears at the right of the page instaid of the center as it should be. This seems to happen with most other web pages that i no

  • Changing  A pages document to pdf file.

    we were working with pages and made a flyer, but in order to send it to our print shop, via email, it must be in .pdf format. We tried to change the document from a .pages, to a .pdf, but it says we have to choose .pages, or .pdf.pages. All we want i