Blue Screen and data lost after rescue n recovery during F11 operation

when I start my T61 Laptop, i get complete blue screen with no addition error window. Pl. suggest solution to this problem.
Moderator edit: problem added to subject line for clarity.
Message Edited by Agotthelf on 21-07-2009 10:40 AM

HI
Thanx for replying . Now the problem of immedietly solved when i booted my laptop with F8 . But the new problem arises. When I logged in, the system starts fine but when I run rescue n recovery option from thinkvantage button , the laptop restarts and then all errors shown. Like "c_1252.nls" file is missing or corrupted. This is the first messege I got while booting. Then I booted with F11 for rescue n recovery. I recovered file c_1252.nls from backup folder on harddrive. But when i restarted again the new c_0437.nls shown missing and this i got so many times after each n every rescue n recovery options. Then I again rescued all the files in system32 folder and restarted my laptop. Which restarts good uptill it asked for domain password . But when i clicked to enter the password the error messege shown " Diskeeper not present" and subsequently "SQL server is disturbed" like that . But the login successful and when the desktop arises the windows intstaller window shows but no further processing even i waited for 15 min. And above all I lost all my data saved in one n only drive that the LENEVO provided with OS. NO partiton. PL. suggest any solution this . Is it possible to recover my data since I didnt make any backup ?

Similar Messages

MacBook Pro hanging with blue screen and spinner after installing Software Update

Hi I was wondering if someone could help me with this current issue. Just a few hours ago I finished reinstalling Mac OS X Snow Leopard in my MacBook Pro. I performed a clean installation as part of a yearly spring cleaning that I do on all my systems to keep them optimized. So there was I downloading some software updates which included the combo update of OSX 10.6.8 and others. The updates finished downloading and the system logged out to install the updates, when the updates finished installing my MacBook proceeded by logging out into a blue screen and show a gray spinner similar to the one seen when you start your Mac. Here's the problem after 2 hours the system is showing the spinner and the blue screen, I think that my computer has just hanged in the reboot process.
I was wondering what should I do? Do a force restart? Or leave it overnight?
Also, where can I find any information on what error is causing this issue?
I appreciate your responses and help.
By the way, I installed Mac OS X from a USB stick that has the original image of the disk installer that came bundled with my computer.

Kappy wrote:
Force a shutdown. Do not restart yet, but first do the following:
Repair the Hard Drive
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Next, boot into Safe Mode then restart normally.
Hi Kappy,
Checked the hard drive after forcing a shutdown and booting from my Snow Leopard Installer USB Key and the status of the HDD says "Verified". I ran the repair and the volume was repaired successfully. Clicked on "Verify Disk" and it says "Macintosh HD appears to be OK". So I ran a second repair and again no errors were reported.
As suggested I booted back again in Safe Mode and restarted normally. All software appears to have been installed successfully. But I don't understand why my computer hanged and showed the spinner after installing the updates in the blue screen that appears just before rebooting. I am aware that the system shows that spinner after a OS update but the longest it lasts is 30 seconds at the most in my previous cases.

I have an iphone 5s and my phone was working perfectly fine then it turn into a blue screen and after that i tried to restore it but when i do the phone does half of the steps and then it turns into a blue screen and it doesnt work again what can i do?

i have an iphone 5s and my phone was working perfectly fine then it turn into a blue screen and after that i tried to restore it but when i do the phone does half of the steps and then it turns into a blue screen and it doesnt work again what can i do?

The Basic Troubleshooting Steps are:
Restart... Reset... Restore from Backup... Restore as New...
Malvinfromny wrote:
... i tried to restore it but when i do the phone does half of the steps and then it turns into a blue screen and it doesnt work again what can i do?
If you try all these Steps and you still have issues... Then a Visit to an Apple Store or AASP (Authorized Apple Service Provider) is the Next Step... Be sure to make an appointment first...

After login I get a blue screen and then back to login window, but only for one account

When one of the users on the iMac tries to login it goes to a blue screen and back to the login window. This only happens with one of the users - I've tried doing a safe boot, running disk utility, and using Time Machine to restore the user's libray back to pre-problem timetable. When I run repair permissions I do gt a SUID file "usr/sbin/vpnd" and "usr/sbin/pppd" have been modified. Any ideas?

Try this...
http://reviews.cnet.com/8301-13727_7-20013630-263.html
If that doesn't help I'd make a new user & use an admin account to move the old folders over & change rights to the new user.

Installed Itunes: New PC, Windows 7 x64, updated ipod software, click to eject ipod, PC goes to blue screen, dumps data, restarts; songs do not play correctly on ipod. IE: play a song - only first few seconds will play. Some songs play fully, some do not.

Installed Itunes: New PC, Windows 7 x64, updated ipod software, click to eject ipod, PC goes to blue screen, dumps data, restarts; songs do not
play correctly on ipod. IE: play a song - only first few seconds will play. Some songs play fully, some do not.

Hi just wanted to let you know I solved most of my XP problems with my new IPOD. It won't recognise the IPOD or driver and froze and locked up and then the battery died. After hours of trying different things here is what I did. I completly closed computer down. Waited 15 minutes turned on and reloaded everything. I put the usb cable in but not hooked up to IPOD. I turned off Mcaffee (all of it). After my computer came on. I then went and closed everything I didn't need in the bottom toolbar. (taskbar). I then reloaded the software and waited. Took forever to reload and I don't know why but whatever it worked but I DID NOT HOOK UP THE IPOD LIKE IT SAID! I instead shut down the computer after loading the software and waited 5 minutes and turned it back on. I again waited and shut of mcaffee. It loaded everything fine this time and said new hard ware and drivers detected. I plugged my IPOD in and YES I WAS UP AND RUNNING (THIS IS AFTER 6 HOURS OF PLAYING WITH OTHER THINGS!) I am able to load and play, burn, watch movies, see pictures and everything your suppose too! The only thing I see different than the instructions is I left my usb cable plugged in and when it said to eject the disk I didn't. I also didn't plug in the IPOD (5th Gen) and then I shut down waited and then restarted the computer. I hope this helps others because I know the feeling of wanting to return something you paid dearly for and worked hard at saving money to buy one and it doesn't work. My only thing I dislike about apple is they didn't supply a ac adapter for the IPOD and the instructions say to plug it up when trying to charge battery. DUHHHHHH, ya can't do that if ya don't have one and stores are closed and won' open until Monday! But at least I am up and running. I just hate having to plug up IPOD to computer daily to charge the battery which only last a half a day1

Ipad air getting blue screen and restarting

after upgrading to ios8 my ipad is getting blue screen and restarting frequently. I restored my ipad from itunes and configured as new, still same issue.

Hello harichikka,
Thanks for using Apple Support Communities.
Since you have already restored your iPad as new, but you're still experiencing this blue screen and restarts, the next step would be to ensure your iPad is up to date, and contact Apple.
iOS: Device unexpectedly restarts, displays Apple logo, or powers off
Cheers,
Alex H.

Blue screen and spin wheel on start up

Right, typing this on iPhone and was a nightmare
To find the place to per this....
This morning went to turn on 17 inch 2009 mbp and stays on blue screen with spinner Jen flocks and refreshes blue screen and spinner every 10 seconds... Managed to restart in safe mode with disc.... Went to repair disk permissions and in red gives me the following: "error: the underlying task reported failure on. It."
Right someone tell me what is going on and instructions how to fix this and recover my data please.... I'll be checking From iPhone and hopefully typing to minimum please.
Many thanks

Update: when I click on either the repair or verify buttons after selecting the hard disk in utility it fives the red error message as describes above, however, when I click the verify icon at very top left it takes a minute to verify then reports in green "The volume Macintosh HD appears to be OK". ... Don't know if that helps anyone with a diagnosis?
I'll look forward to any sort of help anyone can supply, thanks!

G4 has blue screen and I still can't get it to login...HELP!

I went to the store and when I returned I had a blue screen with my mouse pointer that could move. I read tons of post on here and tried everything such as resetting PRAM, bought a new battery because like threads said, I too would push the power button and it would flicker and not turn on. I would have to unplug the power cord just to be able to get another try. If I didn't, nothing happened. So then I borrowed my Aunt's Leopard CD she had from her iMac and tried booting off it (holding down the C button) and nothing. I get a message stating that I can't boot off of that disc? After letting it sit for a few hours I was finally able to get past the blue screen and access Disk Utility. I tried repairing the disc (i have 3 plus the backup drive) and I get past that. I then select Verify Disk Permissions and get a "FIRST AID FAILED" Message saying Disk Utility stopped repairing permissions on "HD" because the following error was encountered. The underlying task reported failure on exit. So then I run across a thread saying that it could possibly be a admin user or password problem. I remember just before the blue screen that I was indeed researching on how to lock a folder on my desktop as well as my back up drive. So I followed the instructions and powered it on while holding the apple key + S key and typed in mount -uw /
rm /car/db/.AppleSetupDone
shutdown -h now
Now when I turn it on it starts up just like its brand new. However, I can't get past the part where it ask if I want to transfer information from another computer or Hard Drive or do it later with Migration Assistant. I have tried starting it and holding down the C key and nothing happens - I get the gray Apple screen frozen. I have held down the Option Key and restarted and selected both the HD and Start Up Disk which both have a little blue X in the corner if that helps and same results. Before trying to start up using the disc i forgot to mention I tried restarting it pulling each of the RAM drives out and putting them in different locations and that did nothing. And FINALLY! The last restart prior to posting this I have a bunch of lines across the Purple Galaxy Screen that says:
System Failure: cup=0; code=00000001 (Corrupt Stack).
Latest crash info for cpu 0:
Exception state (sv0x29d85280)
Backtrace terminated - frame not mapped or invalid:
Any ideas from here?

Whoah boy, lots of things here and I have to make supper...
I'll choose a few at a time. "RAM drives"
RAM drives? Do you mean hard drives? Do you mean RAM chips?
If hard drives, did you put them back in the same order? Multiple hard drives in one machine often need to be jumpered correctly when you move them about.
If chips... It's too difficult at this stage to tell if it is hardware or software. If hardware it could be chips, and that error at the end had a vague chip ring to it. One way to test for chips if you have extra chips is to pull all but the minimum required to boot and see if it boots.
You mention a backup drive. This wouldn't happen to have a clone of the operating system on it would it?
4 drives... All internal?
From all you've said it could be hardware or software. Blue screen could be software but failing hardware can corrupt a drive, messing up the software.
Boot discs. It sounds like you have no boot discs (CD. DVD) for this computer, right?
What computer are you using right now?

Extremely Slow Startup, Blue Screen, and Poor Performance

Hello,
A couple of weeks ago my MBP 15" (late 2009 model) started performing really poorly. The colour wheel would spin for about 2 minutes if a launched any applications and everything was really slow. It also took about 10 minutes on the grey apple screen to startup and then another 10 or so on the blue screen before slowly revealiing my desktop.
I took it into the genius bar and the said it might be a corrupt file on the HD. Backed up my HD, zeroed the drive and reinstalled OS. Still the same problems. Ran disk utility several times and got various errors pertaining to HD or RAM.
Took it back into the Genius bar and they ran a long diagnostic on it, came back to me and said it is deifinatly the RAM. I replaced the ram, (2x2GB ddr3-1066 sodimm) and cleared PRam. Still the same startup and performance issues.
Any ideas would be appreciated as this is stressing me out big time as I dont know what else it could be?

SpennyT1 wrote:
Backed up my HD, zeroed the drive and reinstalled OS.
Hmm... before this I think I would have restarted the computer in Safe Boot mode which deletes the dynamic-loader shared cache.
Not sure if it is relevant at this point
Safe Boot
# it forces a directory check of the startup volume.
# It loads only required kernel extensions (some of the items in /System/Library/Extensions).
# In Mac OS X v10.3.9 or earlier, Safe Mode runs only Apple-installed startup items (such items may be installed either in /Library/StartupItems or in /System/Library/StartupItems; these are different than user-selected account login items).
# It disables all fonts other than those in /System/Library/Fonts (Mac OS X v10.4 or later).
# It moves to the Trash all font caches normally stored in /Library/Caches/com.apple.ATS/(uid)/ , where (uid) is a user ID number such as 501 (Mac OS X v10.4 or later).
# It disables all startup items and login items (Mac OS X v10.4 or later).
# Mac OS X v10.5.6 or later: A Safe Boot deletes the dynamic loader shared cache at (/var/db/dyld/). A cache with issues may cause a blue screen on startup, particularly after a Software Update. Restarting normally recreates this cache.
Message was edited by: leroydouglas
Did you run the Apple Hardware Test. What is the S.M.A.R.T. status, could be that HD is failing?

Blue Screen on Domain controllers after Updates

After patching our Domain controllers (virtual on ESXi 5.5 U2) recently we started getting Blue screens and reboots. Other changes in our environment around this time include enabling vshield drivers and scanning with Trend Micro. I have removed patches
from April but cannot remove Patch KB3020370 - there is no uninstall button. The error still persists, I have removed the Vshield driver and am waiting to see if the issue reoccurs. Can anyone assist in interpreting the details below? Also is it possible to
remove the patch KB3020370? This only appeart to affect Domain Controllers, regular servers appear unaffected.
Thanks
Below is the BugCheck event.
The computer has rebooted from a bugcheck. The bugcheck was: 0x0000007f (0x0000000000000008, 0x0000000080050031, 0x00000000000406f8, 0xfffff800018c0e14). A dump was saved in: C:\Windows\MEMORY.DMP. Report Id: 042915-21762-01.
And output from the debug tool.
Microsoft (R) Windows Debugger Version 6.3.9600.17237 AMD64
Copyright (c) Microsoft Corporation. All rights reserved.
Loading Dump File [c:\MiniDump\042815-21762-01.dmp]
Mini Kernel Dump File: Only registers and stack trace are available
Error: Attempts to access 'c:\windows\i386' failed: 0x2 - The system cannot find the file specified.
************* Symbol Path validation summary **************
Response Time (ms) Location
Error c:\windows\i386
************* Symbol Path validation summary **************
Response Time (ms) Location
Deferred srv*c:\symbols*http://msdl.microsoft.com/download/symbols
Symbol search path is: srv*c:\symbols*http://msdl.microsoft.com/download/symbols
Executable search path is: c:\windows\i386
Windows 7 Kernel Version 7601 (Service Pack 1) UP Free x64
Product: LanManNt, suite: TerminalServer SingleUserTS
Built by: 7601.18798.amd64fre.win7sp1_gdr.150316-1654
Machine Name:
Kernel base = 0xfffff800`0185e000 PsLoadedModuleList = 0xfffff800`01aa3890
Debug session time: Tue Apr 28 13:20:34.290 2015 (UTC + 1:00)
System Uptime: 0 days 0:27:28.954
Loading Kernel Symbols
Press ctrl-c (cdb, kd, ntsd) or ctrl-break (windbg) to abort symbol loads that take too long.
Run !sym noisy before .reload to track down problems loading symbols.
Loading User Symbols
Loading unloaded module list
* Bugcheck Analysis *
Use !analyze -v to get detailed debugging information.
BugCheck 7F, {8, 80050031, 406f8, fffff800018d4e14}
Probably caused by : ntkrnlmp.exe ( nt!KiDoubleFaultAbort+b2 )
Followup: MachineOwner
kd> !analyze -v
* Bugcheck Analysis *
UNEXPECTED_KERNEL_MODE_TRAP (7f)
This means a trap occurred in kernel mode, and it's a trap of a kind
that the kernel isn't allowed to have/catch (bound trap) or that
is always instant death (double fault). The first number in the
bugcheck params is the number of the trap (8 = double fault, etc)
Consult an Intel x86 family manual to learn more about what these
traps are. Here is a *portion* of those codes:
If kv shows a taskGate
use .tss on the part before the colon, then kv.
Else if kv shows a trapframe
use .trap on that value
Else
.trap on the appropriate frame will show where the trap was taken
(on x86, this will be the ebp that goes with the procedure KiTrap)
Endif
kb will then show the corrected stack.
Arguments:
Arg1: 0000000000000008, EXCEPTION_DOUBLE_FAULT
Arg2: 0000000080050031
Arg3: 00000000000406f8
Arg4: fffff800018d4e14
Debugging Details:
BUGCHECK_STR: 0x7f_8
CUSTOMER_CRASH_COUNT: 1
DEFAULT_BUCKET_ID: WIN7_DRIVER_FAULT_SERVER
PROCESS_NAME: System
CURRENT_IRQL: 0
ANALYSIS_VERSION: 6.3.9600.17237 (debuggers(dbg).140716-0327) amd64fre
LAST_CONTROL_TRANSFER: from fffff800018cffe9 to fffff800018d0a40
STACK_TEXT:
fffff800`01620d28 fffff800`018cffe9 : 00000000`0000007f 00000000`00000008 00000000`80050031 00000000`000406f8 : nt!KeBugCheckEx
fffff800`01620d30 fffff800`018ce4b2 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiBugCheckDispatch+0x69
fffff800`01620e70 fffff800`018d4e14 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!KiDoubleFaultAbort+0xb2
fffff880`0276e000 00000000`00000000 : 00000000`00000000 00000000`00000000 00000000`00000000 00000000`00000000 : nt!IopfCompleteRequest+0x4
STACK_COMMAND: kb
FOLLOWUP_IP:
nt!KiDoubleFaultAbort+b2
fffff800`018ce4b2 90 nop
SYMBOL_STACK_INDEX: 2
SYMBOL_NAME: nt!KiDoubleFaultAbort+b2
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: nt
IMAGE_NAME: ntkrnlmp.exe
DEBUG_FLR_IMAGE_TIMESTAMP: 5507a73c
IMAGE_VERSION: 6.1.7601.18798
FAILURE_BUCKET_ID: X64_0x7f_8_nt!KiDoubleFaultAbort+b2
BUCKET_ID: X64_0x7f_8_nt!KiDoubleFaultAbort+b2
ANALYSIS_SOURCE: KM
FAILURE_ID_HASH_STRING: km:x64_0x7f_8_nt!kidoublefaultabort+b2
FAILURE_ID_HASH: {0367acc4-9bb4-ab69-5701-46a2011718e9}
Followup: MachineOwner

Hi,
Dump file displays：
BugCheck 7F, {8, 80050031, 406f8, fffff800018d4e14} and Probably caused by : ntkrnlmp.exe ( nt!KiDoubleFaultAbort+b2 ).
Bug check 0x7F typically occurs after you install a faulty or mismatched hardware (especially memory) or if installed hardware fails.
A double fault can occur when the kernel stack overflows. This overflow occurs if multiple drivers are attached to the same stack. For example, if two file system filter drivers are attached to the same stack and then the file system recurses back in, the stack
overflows.
You may reference the link below for detailed resolution about this problem:
https://msdn.microsoft.com/en-us/library/windows/hardware/ff559244(v=vs.85).aspx
Besides, you may try to restore the server to the state before installing these Windows Update.
Best Regards,
Eve Wang
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Blue screen of death? I just updated my MacBook Air with the latest OX (25 Jun 11). When I restart - I get the Apple logo and then a blue screen and nothing else. Help!!!

Blue screen of death? I just updated my MacBook Air with the latest OX (25 Jun 11). When I restart - I get the Apple logo and then a blue screen and nothing else. Help!!!

Insert the install disk and press c on startup. Select your langauge then, if there's a menubar click utilities then click Disk Utility. If you didn't see the menubar continue with the installer until you see it.
Once in disk utitly select the drive and repair permissions.
After the repair is done, quit the utiltiy.
You can try to reboot and see if it works if you reboot, but if it doesn't repeat the same as before again.
Now you can continue with the installer and install the os.
Quit

I have a MacBook Pro, it recently started freezing upon startup. It would get to a blue screen and just sit there. I've tried booting in safemode to run disk repair and still doesnt help. If I do manage to get past the blue screen, it still freezes

My mac keeps freezing upon startup. It will get to the blue screen and promptly freeze. If I manage to get past the blue screen, and open up youtube on google chrome, it will freeze before it loads youtube. I've tried safeboot and disk repair, nothing seems to work. I even tried to factory reset it but it wont connect to my internet when I reboot with power + option.. any ideas?

This can be used to boot the machine and delelte enough files to get it to boot normally.
.Create a data recovery/undelete external boot drive
Read about storage drive so you can store your extra stuff.
Most commonly used backup methods
Also here to see how a full boot drive slows the machine down
Why is my computer slow?

Blue screen and volume issue

Need some help here. (hope Im in the right place)
Im getting the blue screen and spinning wheel at shutdown, computer wont turn off.
I run Techtool Deluxe and my Volume Structure fails (passes surface scan).
Disk Utility says volume is fine......
Im sure an erase and install would do the trick but I would really like to know more about what the issue is, how it happened, and how to avoid it in the future. As well as if its fixable without a clean install.
Just getting into the tech side of life so any direction on troubleshooting this issue would be much appreciated.
Thanks you

Hello jackhandy234,
I have a white iPhone 5 running on the latest IOS 7.0.4 and I am having a similar problem. I have had my phone for about 6 months now and have had it always well protected in a sturdy case similar to an otter box case. I have had no problems with the phone until 2 nights ago.
While on the messaging app "kik" My phone froze up, vertical pixalated lines appeared,it faded into a black screen, shut down and automatically turned on again. It repeated this "glitch" while powering back up about 3 times. Finally after having to manually restart it by pressing the power and home button for 5-6 seconds it stop.
After going back to using my phone, not 5 mins past, and it was "glitching" up again. In the past 48 hours it has glitch over 26+ times. Everytime I need to use my phone for more then 5 mins I need to manually reset it.
If you have found a solution to your problem, please post it because it could possibly solve mine.

Has anyone else experienced blue screens and continuous reboots on 5S

I picked up my silver 5S 32 GB at the Verizon store Friday morning. Throughout the morning I noticed that I would hit the home button and it would be powered down. I loaded the .1 patch assuming maybe it was a glitch. I went through the rest of the day with a couple more home button/powered down situations. When I got I home, I plugged it in to iTunes to recover a backup and following the restore it went into blue screen reboot cycle. I performed the soft reset and restored the backup 3 times with the same results. The soft reset was the only means to stop the reboot cycle. I then tried 3 times doing a restore from the cloud with the exact same results. Finally I did a from scratch install thinking my backups were bad. It would stay up awhile but then eventually go into the blue screen and reboot. Sometimes the cycle wouldn't occur in that it would boot up to Home screen following the blue screen. I took the phone to the Apple store the next day, they looked it over, witnessed the blue screen and confirmed there was an issue. I then went to the Verizon store and swapped it for a Space Grey 32GB. I experienced the exact same cycle with the grey so I called Apple. I have spent 3+ hours working through this with a very helpful agent. Turns out a have 2 bad ones in a row! The way I can almost instantly get it to go to blue screen is clicking the Photos icon. Now I am waiting on a second replacement at the Apple store. We have done the soft reset, the hard reset, and the phone restore so we know now that the backup had nothing to do with it as I can do a restore and still have it blue screen after clicking Photos. Anyone seeing anything like this?

Searching for others who might have the same problem increases your chance of finding a solution. Common sense in troubleshooting devices dictates you look for others who might have the same problem in hopes someone already has a solution. Your comment is irrelevant and leads one to think you are spoiling for an argument. Why???

I have a blue screen and no disks as computer is second hand

hi there.
I bought a second hand mac book pro from ebay last year as I had never had an apple computer before and wanted to see how I would go. I have been downloading movies and the computer was working fine. Last night the computer seemed to over heat and switch off. I am now trying to use the computer again and all I get is a blue screen and nothing else. it goes through the grey screen and then blue and then nothing. I don't have any start up disks is there anything I can do or do I have to take to the apple store to get fixed.

I have read your last two responses and I have no idea why COMMAND D would have any influence on starting the MBP. I also note that you have:
"Just tried:
Single user, safe mode, startup maneger, PRAM, and SMC."
I have the sense that you have windows installed on your MBP. This may or may not have some bearing on your situation. I do not have Windows, therefore I cannot say with any certainty.
If you have done everything that you mention above in the proper sequence I can only suggest reinstalling your OS. Will your MBP start up holding down the option key? If not, try OPTION/COMMAND R on startup.
You need an Internet connection to do this.
Is all of your data backed up? If not insert another HDD in the MBP.
You seem to have tried everything I can think of which has led me to this suggestion. Perhaps others can add additional options in lieu of taking this step. I am just out of ammunition.
Ciao.

Blue Screen and data lost after rescue n recovery during F11 operation

Similar Messages

Maybe you are looking for