Blue screen appears for 1 second after closing my games apps

I'm the only one here having this issue ?
after i played a game like clash of clans, and i'm bout' to close the apps in multitasking tab,
suddenly blue screen appears and  flickering for one second...
i don't know if my unit having a error or there is something like bugs? but its a brand new...
here's the link of video of that issue:
httpswww.youtube.comwatchv=zy55sqScu7g&feature=youtu.be
please help me.. what to do to fix this problem
co'z i cant get a peace of mind with my unit!

Try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose any data by resetting, but it can cure some glitches.
If this does not help, setting it up as new device would be the next step:
How to erase your iOS device and then set it up as a new device or restore it from backups

Similar Messages

  • console    giving me a blue screen a few seconds after loading

    Hi, I just recently got a MBP. After logging in as >console I get a blue screen--just a few seconds later. It's hard to google for this error, anyone know a fix to this??

    oh ok, fixed, it was the "remote desktop" -- enabled
    Macbook Pro Mac OS X (10.4.6)

  • Satellite X300 PQX31A - Blue screen appears for non apparent reason

    Hi,
    I have had my Qosmio X300 for 2 months with no problems till now. I got some random blue screens so checked the driver site and found the Bios update 1.60.
    I installed this now the blue screen thing is happening every time I push the machine hard. It does not seem to be getting hot but when I tried the ntune utility to find temps this made it blue screen every time.
    I am starting to get a little lost how to diagnose this.
    I cannot find the 1.50 bios to downgrade to.
    The blue screens are IRQL, Page Fault ect. Seems to be in Adobe CS4, Matlab and ntune i.e. anything which tried to access the mainboard or pushes hard.
    I have not installed before the first series of crashes.
    Any further thoughts?
    Cheers,
    Lost

    Hi,
    The bios is now 1.60 from 1.50 wich did not resolve the issue. There are no new display dirvers for this model. Sorry I can not remember the BSOD codes and currently dont have the laptop as I have sent it back to Toshiba. I suspect bad memory.
    Cheers,

  • Blue screen appears on startup and at shutdown

    A few months ago, I bought a macbook pro and it was doing fine. But recently, every time it starts, a blue screen appears for a split second then it goes to log- in. Then, every time I shutdown, it will also show up for a split second then shutdown. It doesn't affect the computer but I'm just wondering how to stop it.

    I couldn't rember what time it started so, I shut down my computer and the blue screen appereed at 8:39:28. But went I turned it on, the blue screen did not show. So, I turnned it of and on again and no blue screen. I did it several times and now the blue screen isn't showing. But I will post the test that showed in the concel during 8:39, when it powered of blue, to the time I powed it on, when the blue screen did not show. If you need more, I will try to give it to you. I'll post again if it shows up again. Also I  should edit out ethernet address too right?
    Here's what its says:
    8:38:07 PM kernel: I0Surface: buffer allocation size is zero
    8:38:47 PM kernel: I0Surface: buffer allocation size is zero
    8:39:28 PM mds: (Error) Server: ==== XPC handleXPCMessage XPC_ERROR_CONNECTION_INVALID
    8:39:28 PM com.apple.launched.peruser.501: (com.apple.talagent.[236]) Exited: Killed: 9
    2/19/12 8:39:28.145 PM
    com.apple.launchd.peruser.501
    ([0x0-0x18018].com.apple.iTunesHelper[284]) Exited: Killed: 9
    2/19/12 8:39:28.145 PM
    com.apple.launchd.peruser.501
    ([0x0-0x13013].com.apple.AppleSpell[260]) Exited: Killed: 9
    2/19/12 8:39:28.147 PM
    com.apple.launchd.peruser.501
    (com.apple.mdworker.pool.0[452]) Exited: Terminated: 15
    2/19/12 8:39:28.203 PM
    loginwindow
    DEAD_PROCESS: 36 console
    2/19/12 8:39:28.467 PM
    shutdown
    halt by ___________:
    2/19/12 8:39:28.467 PM
    shutdown
    SHUTDOWN_TIME: 1329701968 466888
    2/19/12 8:39:54.000 PM
    bootlog
    BOOT_TIME 1329701994 0
    2/19/12 8:40:06.000 PM
    kernel
    PMAP: PCID enabled
    2/19/12 8:40:06.000 PM
    kernel
    Darwin Kernel Version 11.3.0: Thu Jan 12 18:47:41 PST 2012; root:xnu-1699.24.23~1/RELEASE_X86_64
    2/19/12 8:40:06.000 PM
    kernel
    vm_page_bootstrap: 986092 free pages and 54292 wired pages
    2/19/12 8:40:06.000 PM
    kernel
    kext submap [0xffffff7f8072f000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff800072f000]
    2/19/12 8:40:06.000 PM
    kernel
    zone leak detection enabled
    2/19/12 8:40:06.000 PM
    kernel
    standard timeslicing quantum is 10000 us
    2/19/12 8:40:06.000 PM
    kernel
    mig_table_max_displ = 73
    2/19/12 8:40:06.000 PM
    kernel
    TSC Deadline Timer supported and enabled
    2/19/12 8:40:06.000 PM
    kernel
    AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
    2/19/12 8:40:06.000 PM
    kernel
    AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
    2/19/12 8:40:06.000 PM
    kernel
    AppleACPICPU: ProcessorId=3 LocalApicId=4 Enabled
    2/19/12 8:40:06.000 PM
    kernel
    AppleACPICPU: ProcessorId=4 LocalApicId=6 Enabled
    2/19/12 8:40:06.000 PM
    kernel
    AppleACPICPU: ProcessorId=5 LocalApicId=1 Enabled
    2/19/12 8:40:06.000 PM
    kernel
    AppleACPICPU: ProcessorId=6 LocalApicId=3 Enabled
    2/19/12 8:40:06.000 PM
    kernel
    AppleACPICPU: ProcessorId=7 LocalApicId=5 Enabled
    2/19/12 8:40:06.000 PM
    kernel
    AppleACPICPU: ProcessorId=8 LocalApicId=7 Enabled
    2/19/12 8:40:06.000 PM
    kernel
    calling mpo_policy_init for TMSafetyNet
    2/19/12 8:40:06.000 PM
    kernel
    Security policy loaded: Safety net for Time Machine (TMSafetyNet)
    2/19/12 8:40:06.000 PM
    kernel
    calling mpo_policy_init for Sandbox
    2/19/12 8:40:06.000 PM
    kernel
    Security policy loaded: Seatbelt sandbox policy (Sandbox)
    2/19/12 8:40:06.000 PM
    kernel
    calling mpo_policy_init for Quarantine
    2/19/12 8:40:06.000 PM
    kernel
    Security policy loaded: Quarantine policy (Quarantine)
    2/19/12 8:40:06.000 PM
    kernel
    Copyright (c) 1982, 1986, 1989, 1991, 1993
    2/19/12 8:40:06.000 PM
    kernel
    The Regents of the University of California. All rights reserved.
    2/19/12 8:40:06.000 PM
    kernel
    MAC Framework successfully initialized

  • After upgrade to Mavericks, a new gray screen appears just before the regular login screen.  The new screen appears for a few seconds with several boxes full of unidentifiable figures.  How can I remove?

    OS X Mavericks Upgrade Issue
    Now when I boot my iMac, a new gray screen appears for a few seconds following the Apple screen and just before the login screen.  The new screen shows several boxes with unidentifiable figures in them.  It has become annoying because it has never appeared before.   Anyone know of a way to stop this screen (of garbage) from showing?  Thanks…Larry

    It's possible that a PRAM reset may solve the problem:
    http://support.apple.com/kb/HT1379?viewlocale=en_US&locale=en_US

  • Left speaker no sound, no wi-fi, hang up after first or second booting then blue screen appears

    hi there! my laptop always hangs up everytime I open it. Sometimes it open up after minutes of waiting then gradually hangs up before blue screen appears. I had to long press the start button again and again before I could use it.
    By the way, there are times I had to switch into safe mode and found out that the audio is not working anymore. During normal mode, only the left speaker is operational. Lastly, wi-fi signal will constantly disappear after rebooting.
    please help
    robert

    Hi,
    Have not seen any reports of negative experiences (unlike recent Microsoft updates) from the last batch of Windows Updates.
    I would guess you have a coincidental hardware problem.
    A failed HDD would yield an error at boot. You would still be able to boot to the BIOS if you desired.
    Normally failed devices (memory, GPU, CPU) will give audible and visual error codes. Exceptions will always happen.
    Could be the battery, power supply, or maybe the motherboard has bit the dust. You will probably receive no visual or audible error messages when the motherboard fails.
    Try booting with one monitor.
    Jaco
    ****I am not an HP employee****
    Please give a" Kudos, Thumbs Up" if advice received is relevant or" Accept as Solution" to assist other forum users having a similar problem.
    Errare humanum est.

  • Blank screen appears for 45 sec after HP logo... ??

    Blank screen appears for 45 sec after HP logo...  How could i overcome that problem...??

    HI @vamshi_krishna 
    Welcome to the HP Forums!
    It is a super  place to find answers and suggestions!
    For you to have the best experience in the HP forum I would like to direct your attention to the HP Forums Guide Learn How to Post and More
    I grasp that your notebook powers on and 45 seconds  after the HP logo you get a blank screen.
    Here is  link to Computer May Exhibit a Black Screen When Powering On.
    Another one that may help is Computer does not start (Windows 8)
    As I do not know your location this one may be applicable or not.  Computer Displays HP Logo but Then Displays Black Screen After Installing Driver (Asia-Pacific Japan...
    Best of Luck!
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • There is always a blue screen appears after the Apple logo during the booting process. And then everything is back to normal. What is this thing? Is there something wrong with my screen or something?

    There is always a blue screen appears after the Apple logo during the booting process. And then everything is back to normal. What is this thing? Is there something wrong with my screen or something?

    Nah - that's just the normal boot process.
    Clinton

  • TS1541 a blue screen appears after a gray screen with the logo and the spinning gear

    start up problem...a blue screen appears after the gray screen and the spinning gear

    Try using Disk Utility to do a Disk Repair, as shown in this link, while booted up on your install disk. You could have some directory corruption. Let us know what errors Disk Repair reports and if DU was able to repair them. This could just be a start in repairs and you may need a better utility to finish the job.
    Then Repair Permissions.
    No need to report any Permissions errors........we all get them.
       DALE

  • HT4177 My mackbook pro suddenly freezed and when I swiched off and on again, a grey screen appeared with an apple logo then a loading circle underneath, and after a few hours, a blue screen appeared. What shall I do with this?

    My mackbook pro suddenly freezed and when I swiched off and on again, a grey screen appeared with an apple logo then a loading circle underneath, and after a few hours, a blue screen appeared. What shall I do with this?

    What operating system version, and do you have any backups of your data off the machine? TimeMachine? Option Key bootable clones? Storage? DVD's?
    A reinstall of the operating system may be in order as a last resort, so if any of these steps on these links get you into the machine, make sure to backup your personal data (Music, Pictures, Documents, Movies) off the machine to a non-encrypted  powered external drive regular storage drive (not TimeMachine as it might be corrupted too) and disconnect as soon as possible.
    Good Luck and report back all what you tried.
    Also report what change occured before this tragedy happened, was there a  Software Update? A EFI firmware update? Etc.
    https://support.apple.com/kb/TS3148
    more:
    https://support.apple.com/kb/TS2570
    http://docs.info.apple.com/article.html?path=Mac/10.6/en/8963.html
    To boot off the 10.6 install disk, hold c or option key while the disk is in the machine.
    To boot into 10.7 Recvoery mode, hold the command and r keys down while booting.
    To use Safe mode, hold down the Shift Key while booting.
    Other assistance
    https://support.apple.com/kb/HT3964
    https://support.apple.com/kb/HT1379
    https://support.apple.com/kb/ht1782
    https://support.apple.com/kb/HT1564

  • Ipad 2 can not restart, apple logo only appears 2 seconds after that recharge logo appears for 2 minutes continuously while on the charger

    ipad 2 can not restart, apple logo only appears 2 seconds after that recharge logo appears for 2 minutes continuously while on the charger,pls help me

    Try a reset; hope it'll force it into Recovery Mode
    Hold the Sleep and Home button down until you see the Apple logo.

  • Sometimes Blue screen appears on Satellite M70

    Hi there
    I must express my overwhelming frustration with my satellite M70 laptop as I have it for more than a year now(warranty expired) and almost from the get go it had a problem in wich a blue screen appeared and the pc reboots...from the error report it is a problem with the graphics card and/or display driver.
    I did take it to my local retailer for repair but the problem still remains(gone there 3 TIMES! each time waiting for more than a month for repair!and they did send it to toshiba service...)... as the problem doesnt happen *all the time* it seems they just didnt notice or something :(.
    I did update all the drivers but it had no effect on the problem...
    So now what?? Do I send it to repair and they finally replace the graphics card...but I pay??!!
    This is all very upsetting for me as you might imagine...
    And know its worse...it seems to be happening more and more...and many times the computer wont reboot after the bluescreen...it just stays black.
    Now almost every time i turn it on it wont boot...the fan will just work for a few seconds and thats it.
    Im almost certain the graphics card is defective...can I replace it at home? Argh this just feels wrong, the computer had this problem almost from the start and I sent it for repair...they just did not fix it...I shouldnt have to pay to fix it as I sent it for repair 3 times while it still had the warranty...
    Please reply I'm desesperate and have no idea what to do

    Hi Andrej and thanks for the reply
    But the thing is I have already done that countless times...and the problem is still there...same old same old :(
    I have tried seemingly everything...thats why I say its gotta be hardware :S
    Having this in mind Id like to know if there is anything I can do(concerning hardware) without resorting to Toshiba service
    Keep in mind that Im pretty sure it is the graphics card that is faulty(I dont know if its onboard or not)
    Also sometimes when I turn it on the graphics on my pc go weird like an abstract painting or something lol...thats another reason to think its the graphics card.
    So anyone can help me?
    Thanks in advance for your replies :D

  • When I quit Firefox 7 a blue screen appears

    When I quit Firefox 7 a blue screen appears. I go to quit Firefox 7 and then the screen turns blue and I have to press the power button to reset my computer. I'm running OS X 10.6 with the most recent updates. This seem to have started to happen when I updated to Firefox 7. I'm still checking to see if it happens on other applications.

    I've got the same problem on my 2011 MacBook Pro (2.3ghz Core i7, 4gb Stock Ram, Intel 320 SSD 120gb).
    I noticed it was happening a lot on a previous installation of OS X 10.6.8 using the combo update. I kept getting blue screens pretty much on command when quitting firefox, though I first noticed it happen trying to install Microsoft Office 2011.
    I reinstalled OS X 10.6.6, updated to 10.6.8 using 'Software Update' via internet and the last couple months have been fine.
    TODAY, however, quitting Firefox after closing down a bunch of tabs caused the system to freeze up and give me a blue screen. I remember I was able to replicate this problem by quitting firefox after closing 5+ tabs. Can't seem to do it on command now, but I'm hoping this problem doesnt reoccur anymore.
    I bought an apple product based on its claims for being reliable. I need to get work done without headaches.

  • Blue Screen appears on Toshiba Satellite C660-11L (PSCONE)

    Dear all,
    I have this problem ... I believe that it is the display driver, but I prefer to ask you, because you are the TOSHIBA specialists after all. So, I use WinXP Pro x86, SP3, fully updated, without viruses (NOD 32 v. 5 + Malwarebytes).
    When I switch to thumbnails and there are some pictures, when I try switching on my camera, when I even sometimes try to play a movie on my computer and the "blue screen" appears and the laptop automatically restarts by itself.
    So far I was not able to find a driver for the model 11L, but only for C660. Could that be the problem? Please, support me with the solution that I am searching for.
    Best regards,
    A.D. 
    Solved!
    Go to Solution.

    Bug Check 0x7F: UNEXPECTED_KERNEL_MODE_TRAP
    Those do not nail any driver. See if there are other .dmp files of a size other than 98,304 bytes.
    Parameter 1 is 8. If the crashes seem random, it's likely a hardware problem. Arrange for a memory test to run for at least six hours. This runs from a CD.
       Windows Memory Diagnostic
    ==================================================
    Dump File         : Mini020812-03.dmp
    Crash Time        : 2/8/2012 2:16:19 PM
    Bug Check String  : UNEXPECTED_KERNEL_MODE_TRAP
    Bug Check Code    : 0x1000007f
    Parameter 1       : 0x00000008
    Parameter 2       : 0x80042000
    Parameter 3       : 0x00000000
    Parameter 4       : 0x00000000
    Caused By Driver  : ntoskrnl.exe
    Caused By Address : ntoskrnl.exe+64bfa
    File Description  :
    Product Name      :
    Company           :
    File Version      :
    Processor         : 32-bit
    Computer Name     :
    Full Path         : C:\Test\Mini020812-03.dmp
    Processors Count  : 2
    Major Version     : 15
    Minor Version     : 2600
    ==================================================
    ==================================================
    Dump File         : Mini020712-02.dmp
    Crash Time        : 2/8/2012 2:16:13 PM
    Bug Check String  : UNEXPECTED_KERNEL_MODE_TRAP
    Bug Check Code    : 0x1000007f
    Parameter 1       : 0x00000008
    Parameter 2       : 0xb9b38d70
    Parameter 3       : 0x00000000
    Parameter 4       : 0x00000000
    Caused By Driver  : ntoskrnl.exe
    Caused By Address : ntoskrnl.exe+64bfa
    File Description  :
    Product Name      :
    Company           :
    File Version      :
    Processor         : 32-bit
    Computer Name     :
    Full Path         : C:\Test\Mini020712-02.dmp
    Processors Count  : 2
    Major Version     : 15
    Minor Version     : 2600
    ==================================================
    -Jerry

  • IPad Air with iOS 8.02 freezes and blue screen appears. What should be done ? Why is this happening ?

    IPad Air with iOS 8.02 freezes and blue screen appears. What should be done ? Why is this happening ?

    If nothing else works, you might try this one. It has worked for many others ...
    Use iTunes to do a reset to factory default condition. Always be sure to do your backups before fiddling with your iPad. You might do both the iCloud and the iTunes backup, just to be sure!
    Back up and Restore your iOS Device with iCloud or iTunes
    http://support.apple.com/kb/ht1766
    iTunes: About iOS Backups
    http://support.apple.com/kb/ht4946
    Use iTunes to Restore your iOS Device to Factory Settings
    http://support.apple.com/kb/ht1414
    Various issues from many different users have been solved by this. I've lost count on how many have been helped by this, so far. But, it doesn't mean EVERYONE will be helped, but I've seen a whole lot. You can only try and see ...
    iPad 2 and iOS 8.0.2 Problems
    For all iPad 2 owners, this is an important solution for you! These problems result from long-term use, continuous upgrades, corrupted files and various glitches that happen over this long term use. You just need to get your iPad 2 back to FACTORY FRESH CONDITION to start out clean!
    Here's one person's solution which will help a lot of iPad 2 users!
    keithfrommariettaOct 12, 2014 3:25 PM Re: IPAD2 very slow after IOS 8 upgrade
    Re: IPAD2 very slow after IOS 8 upgradein response to pacoKAS
    SOLVED:  IOS 8 Issues on iPad 2:
    I just returned home from a visit to the Genius Bar. Like you and many others, when I upgraded my iPad 2 to IOS 8, it became practically unusable. It was VERY slow, lagged whenever trying to to do anything. Lots of screen freezes and apps spontaneously crashing. I was convinced that the processor on the iPad 2 just couldn't handle the new IOS and I went in to see about restoring to IOS 7.
    Thankfully, I was hooked up with a very sharp guy at the bar. The problem is not with the OS, it is with it being an *upgraded* OS. He used the analogy of when you had an older Windows computer and how over time (and over upgrades), they just tended to get slower and slower because of all of the garbage that was carried forward in the upgrades. At those times (and if you've ever had a Windows computer, you get this), the only thing that would speed it up would be to wipe the machine and do a fresh install of the current OS and then reload your apps, and the viola, everything would be fast again. Well, it turns out that IOS can suffer the same problems.
    THE FIX:  FIRST, be sure you have a current iCloud backup of your device.  Connect your iPad to a computer that has a clean fresh copy of IOS 8 on iTunes (this is best done with a computer other than the one that you sync your device to because you DO NOT want to restore it from a back up just yet). Ideally, if you do this at an Apple store you'll be assured of the right version there and someone to answer any questions you might have along the way. You then hold the power and home button down to hard-reset the device and continue to hold them down until it reboots into recovery mode. You then follow the instructions on the computer to reinstall the OS on the device (which wipes everything from it and then reinstalls a clean copy of it). Once this is done (which only takes about 15 minutes), your device will reboot and ask you to set it up. Answer the questions about language, location, etc. and continue until it asks you to log into your iTunes account. Once you do that, it will ask if you want to either 1) Set it up as a new device, 2) Restore from iCloud, or 3) Restore from iTunes. Choose (2), restore from iCloud. This will ensure that it brings down "clean" copies of all of your apps and preferences rather than the potentially corrupted ones that might reside in your iTunes backup. That's it! It will take a few hours depending on how much data and apps you have, but I am happy to report that my iPad 2 is now running IOS 8 and it's running as fast as it ever did when it was brand new!
    To sum it up, this process 1) Wipes your device and the garbage causing your problems, 2) Loads a clean and bug-free version of IOS 8 to your device, and 3) restores your apps and data so that it looks just like it did before the wipe, with the exception that it works now!  :-)
    Note also that by following this process you don't have to go through the painful and laborious process of reloading all of your apps, data and/or settings. iCloud takes care of all of that for you.

Maybe you are looking for

  • IS it possible to share external hard drive Mac To Mac, over a PC network,

    I would like to explain this situation in it's own post so it's clear. I am at my brother's house (PC user) and both my wife and I are Mac users who are on the network. I have an external hard drive which is plugged directly into my wife's Macbook. I

  • End User Manual

    Hi SAP Gurus, We are currently want to create the end user manual for the users at client. I want to know what are the different  details that should be maintained in the End User Training Manual. Should we enter screen shots and any question answer 

  • How can i build a portlet with multi-record fields

    Hi I am building an application and some of my forms need to capture multi-records fields,for example like Developer Forms does with Grids Can anybody send me an example to do this?. Thanks

  • Technology development/deployement strategy (in ASP model)

    Hi: We're starting a new business and we have completed the 1st phase of the project! The software we're creating will follow the ASP model (application server provider) and use VPD technics. The software applications will be accessed by internet fro

  • Moving apps between users

    Is it possible to move apps from one user to another on the same computer?