Blue screen appears & Information about Archive & Install option.

Hey, i am using Mac 10.5.8
Yesterday it was working perfectly fine.
But after dinner when i tried to open, it dont go beyond blue screen
I have tried disk utility using original MAC OS X DVD, while verifying it says disk appears to be ok, but its says some alterations in disk pernission, i have clicked on repaire disk permission, and after that tried to start, but still it stuck at that blue screen.
Its getting that grey apple screen, then further going to that blue scren, but dont go beyond that.
Now i want to know if anyone have solution to this problem. Please help me
Also want to know, if i go for "Archive & Install " option, will that keep my data or erase my data. As i have arround 2-4 GB important data.
Please respond to this as soon as possible, i need it to be fixed urgently.
Thanks in advance.

Once the system is up and running, you should keep a back up of very important data.
You can burn a DVD.
That is why i am asking, will archieve and install keep my data safe?? All my documents and all??
Normally data should be safe after Archive and Install.
That is my experience. But there is no guarantee.
Best.

Similar Messages

Blue screen appears when installing boot camp in windows 7

i have tried four times to run setup and the same blue screen appears and it restarts,
what am i doing wrong please
thanku
xx

Maybe your post should be reversed some how. In any case the Boot Camp form is here:
http://discussions.apple.com/category.jspa?categoryID=237

Blue screen appears on Windows HP G56. ***STOP: 0x000000F4

Blue screen appears at random times ...
Product name: HP G56 Notebook PC
Product number: XP267EA#ABU
Message reads:
If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing.
***STOP : 0x000000F4 (0x0000000000000003, 0xFFFFFA8U06F32B30, 0XFFFFFA8006F32E10, 0XFFFFF80002F94660)
I've already put it back to factory image setting and updated all the updates so could someone please tell me what i can do.

Blue screen appears at random times ...
Product name: HP G56 Notebook PC
Product number: XP267EA#ABU
Message reads:
If problems continue, disable or remove any newly installed hardware or software. Disable BIOS memory options such as caching or shadowing.
***STOP : 0x000000F4 (0x0000000000000003, 0xFFFFFA8U06F32B30, 0XFFFFFA8006F32E10, 0XFFFFF80002F94660)
I've already put it back to factory image setting and updated all the updates so could someone please tell me what i can do.

IPad Air with iOS 8.02 freezes and blue screen appears. What should be done ? Why is this happening ?

IPad Air with iOS 8.02 freezes and blue screen appears. What should be done ? Why is this happening ?

If nothing else works, you might try this one. It has worked for many others ...
Use iTunes to do a reset to factory default condition. Always be sure to do your backups before fiddling with your iPad. You might do both the iCloud and the iTunes backup, just to be sure!
Back up and Restore your iOS Device with iCloud or iTunes
http://support.apple.com/kb/ht1766
iTunes: About iOS Backups
http://support.apple.com/kb/ht4946
Use iTunes to Restore your iOS Device to Factory Settings
http://support.apple.com/kb/ht1414
Various issues from many different users have been solved by this. I've lost count on how many have been helped by this, so far. But, it doesn't mean EVERYONE will be helped, but I've seen a whole lot. You can only try and see ...
iPad 2 and iOS 8.0.2 Problems
For all iPad 2 owners, this is an important solution for you! These problems result from long-term use, continuous upgrades, corrupted files and various glitches that happen over this long term use. You just need to get your iPad 2 back to FACTORY FRESH CONDITION to start out clean!
Here's one person's solution which will help a lot of iPad 2 users!
keithfrommariettaOct 12, 2014 3:25 PM Re: IPAD2 very slow after IOS 8 upgrade
Re: IPAD2 very slow after IOS 8 upgradein response to pacoKAS
SOLVED: IOS 8 Issues on iPad 2:
I just returned home from a visit to the Genius Bar. Like you and many others, when I upgraded my iPad 2 to IOS 8, it became practically unusable. It was VERY slow, lagged whenever trying to to do anything. Lots of screen freezes and apps spontaneously crashing. I was convinced that the processor on the iPad 2 just couldn't handle the new IOS and I went in to see about restoring to IOS 7.
Thankfully, I was hooked up with a very sharp guy at the bar. The problem is not with the OS, it is with it being an *upgraded* OS. He used the analogy of when you had an older Windows computer and how over time (and over upgrades), they just tended to get slower and slower because of all of the garbage that was carried forward in the upgrades. At those times (and if you've ever had a Windows computer, you get this), the only thing that would speed it up would be to wipe the machine and do a fresh install of the current OS and then reload your apps, and the viola, everything would be fast again. Well, it turns out that IOS can suffer the same problems.
THE FIX: FIRST, be sure you have a current iCloud backup of your device. Connect your iPad to a computer that has a clean fresh copy of IOS 8 on iTunes (this is best done with a computer other than the one that you sync your device to because you DO NOT want to restore it from a back up just yet). Ideally, if you do this at an Apple store you'll be assured of the right version there and someone to answer any questions you might have along the way. You then hold the power and home button down to hard-reset the device and continue to hold them down until it reboots into recovery mode. You then follow the instructions on the computer to reinstall the OS on the device (which wipes everything from it and then reinstalls a clean copy of it). Once this is done (which only takes about 15 minutes), your device will reboot and ask you to set it up. Answer the questions about language, location, etc. and continue until it asks you to log into your iTunes account. Once you do that, it will ask if you want to either 1) Set it up as a new device, 2) Restore from iCloud, or 3) Restore from iTunes. Choose (2), restore from iCloud. This will ensure that it brings down "clean" copies of all of your apps and preferences rather than the potentially corrupted ones that might reside in your iTunes backup. That's it! It will take a few hours depending on how much data and apps you have, but I am happy to report that my iPad 2 is now running IOS 8 and it's running as fast as it ever did when it was brand new!
To sum it up, this process 1) Wipes your device and the garbage causing your problems, 2) Loads a clean and bug-free version of IOS 8 to your device, and 3) restores your apps and data so that it looks just like it did before the wipe, with the exception that it works now! :-)
Note also that by following this process you don't have to go through the painful and laborious process of reloading all of your apps, data and/or settings. iCloud takes care of all of that for you.

Reinstalling os x: Can't see "archive&install" option

Hi!
I bought my Macbook Pro Retina 13" 5 months ago, and I just realized that it came without iMovie and iTunes. It might have something to do with the fact that I bought a sample piece. The store said that I should reinstall OS X which should bring those back, and they gave me the instructions to do the installation with an "archive & install" option. But when I restart my computer (while holding cmd + R), I can't see that option anywhere! It just starts to reinstall OS X and I'm afraid that it will erase all my pictures and software (which I should do a back up of, I know, but now I don't have an external hard drive!). How can I be sure that the reinstallation won't delete my data, since I can't see the Archive&Install -option anywhere??
Thanks!

There is no such option since the disappearance of Leopard. Reinstalling OS X will not bring back iMovie since it isn't part of OS X and never has been. It's part of iLife which should be available to you through the App Store.
To erase and install properly you need to do the following:
Install OS X Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Erase the hard drive:
Select Disk Utility from the main menu and click on the Continue button.
After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Erase tab in the DU main window.
Set the format type to Mac OS Extended (Journaled.) Click on the Erase button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
This should restore the version of OS X originally pre-installed on the computer.

HT4177 My mackbook pro suddenly freezed and when I swiched off and on again, a grey screen appeared with an apple logo then a loading circle underneath, and after a few hours, a blue screen appeared. What shall I do with this?

My mackbook pro suddenly freezed and when I swiched off and on again, a grey screen appeared with an apple logo then a loading circle underneath, and after a few hours, a blue screen appeared. What shall I do with this?

What operating system version, and do you have any backups of your data off the machine? TimeMachine? Option Key bootable clones? Storage? DVD's?
A reinstall of the operating system may be in order as a last resort, so if any of these steps on these links get you into the machine, make sure to backup your personal data (Music, Pictures, Documents, Movies) off the machine to a non-encrypted powered external drive regular storage drive (not TimeMachine as it might be corrupted too) and disconnect as soon as possible.
Good Luck and report back all what you tried.
Also report what change occured before this tragedy happened, was there a Software Update? A EFI firmware update? Etc.
https://support.apple.com/kb/TS3148
more:
https://support.apple.com/kb/TS2570
http://docs.info.apple.com/article.html?path=Mac/10.6/en/8963.html
To boot off the 10.6 install disk, hold c or option key while the disk is in the machine.
To boot into 10.7 Recvoery mode, hold the command and r keys down while booting.
To use Safe mode, hold down the Shift Key while booting.
Other assistance
https://support.apple.com/kb/HT3964
https://support.apple.com/kb/HT1379
https://support.apple.com/kb/ht1782
https://support.apple.com/kb/HT1564

Blue screen appears

I've bought my S10e in April 2009. it worked properly until a month ago when i was browsing, this blue screen appears suddenly and Windows (XP SP3, home edition) restarts. It happens too fast that i cannot read the message. after logging in this message rises: the system has recovered from a serious error.... and i send the issue to Microsoft. I use Google Chrome as browser. I think when i'm online using WiFi, it happens. I uninstalled chrome but it happened again with Firefox when it tried to open a web page reporting the problem to Microsoft.
I used the check disk tool in Windows but didn't help. I've two drives, Windows run on C: capacity=30 GB, free space=4 GB.
I've run CCleaner to optimize registry before these blue screens.
I also have Kaspersky Internet security installed on my netbook. it works fine.
I've got all Microsoft updates.
Is it the problem of bios? or what?
please help me because i'm very dependent on my S10e.
Thanks

Hi and welcome,
... if that happen again.. look in system event log file...there could be a hint whats going wrong..
How to view and manage event logs in Event Viewer in Windows XP
on the first look ...your free space 4GB ... .. due huge temp data near full .. keep an eye of this ...
sincerely KalvinKlein
Thinkies 2x X200s/X301 8GB 256GB SSD @ Win 7 64
Ideas Centre A520 ,Yoga 2 256GB SSD,Yoga 2 tablet @ Win 8.1

When i try to open a web page, a blue screen appears and it is telling me " safari cannot open the page because i am not connected to the internet. i have an iphone, no problem and a laptop with connection - no problem - not sure what the trouble is.

when i try to open a web page, a blue screen appears - message says - sarfari cannot open the page because it is not connected to the internet. i have an iphone - no proble and a laptop - no problem as well.
what is wrong?

There are other things that need attention:
Your above posted system details show outdated plugin(s) with known security and stability risks that you should update.
*Shockwave Flash 10.0 r32
Update the [[Managing the Flash plugin|Flash]] plugin to the latest version.
*http://www.adobe.com/software/flash/about/

Blue screen appears for 1 second after closing my games apps

I'm the only one here having this issue ?
after i played a game like clash of clans, and i'm bout' to close the apps in multitasking tab,
suddenly blue screen appears and flickering for one second...
i don't know if my unit having a error or there is something like bugs? but its a brand new...
here's the link of video of that issue:
httpswww.youtube.comwatchv=zy55sqScu7g&feature=youtu.be
please help me.. what to do to fix this problem
co'z i cant get a peace of mind with my unit!

Try to reset the phone by holding the sleep and home button for about 10sec, until the Apple logo comes back again. You will not lose any data by resetting, but it can cure some glitches.
If this does not help, setting it up as new device would be the next step:
How to erase your iOS device and then set it up as a new device or restore it from backups

When i quit safari in full screen a blue screen appears in background

When i close safari in full screen a blue screen appears in mission. What can i do to fix?

Welcome to Apple Communities
Open Finder, press Option key, select Go > Library, open Preferences, delete com.apple.dock.plist, open Terminal and write:
killall Dock

When I quit Firefox 7 a blue screen appears

When I quit Firefox 7 a blue screen appears. I go to quit Firefox 7 and then the screen turns blue and I have to press the power button to reset my computer. I'm running OS X 10.6 with the most recent updates. This seem to have started to happen when I updated to Firefox 7. I'm still checking to see if it happens on other applications.

I've got the same problem on my 2011 MacBook Pro (2.3ghz Core i7, 4gb Stock Ram, Intel 320 SSD 120gb).
I noticed it was happening a lot on a previous installation of OS X 10.6.8 using the combo update. I kept getting blue screens pretty much on command when quitting firefox, though I first noticed it happen trying to install Microsoft Office 2011.
I reinstalled OS X 10.6.6, updated to 10.6.8 using 'Software Update' via internet and the last couple months have been fine.
TODAY, however, quitting Firefox after closing down a bunch of tabs caused the system to freeze up and give me a blue screen. I remember I was able to replicate this problem by quitting firefox after closing 5+ tabs. Can't seem to do it on command now, but I'm hoping this problem doesnt reoccur anymore.
I bought an apple product based on its claims for being reliable. I need to get work done without headaches.

TS1541 a blue screen appears after a gray screen with the logo and the spinning gear

start up problem...a blue screen appears after the gray screen and the spinning gear

Try using Disk Utility to do a Disk Repair, as shown in this link, while booted up on your install disk. You could have some directory corruption. Let us know what errors Disk Repair reports and if DU was able to repair them. This could just be a start in repairs and you may need a better utility to finish the job.
Then Repair Permissions.
No need to report any Permissions errors........we all get them.
 DALE

When I try to tune up my PC, a blue screen appears then immediately shuts down ?

When I try to tune up my PC with the Hp Support Assistant or download my zoo tycoon game, a blue screen appears telling A problem has occured and windows shut itself down to protect data and to disable or remove any new software, and to disable BIOS memory options such as caching or if I need to use safe mode to to remove or disable and components on my computer, then it immediately shuts down? How can I fix this?

What model computer and what Windows version? Blue screens like that can be a lot of things; bad memory, bad hard drive, a virus, a bad driver. The first thing to do is run a full hard drive test in the BIOS and see if there is any physical problem with the hard drive. Then I would do a chkdsk to see if there is a problem with the file structure then lastly an sfc /scannow to see if there are problems with Windows system files. Lastly, I would run a memtest to see if there are memory problems. Post back if you need specific help with any of these things or all of them.

Sometimes Blue screen appears on Satellite M70

Hi there
I must express my overwhelming frustration with my satellite M70 laptop as I have it for more than a year now(warranty expired) and almost from the get go it had a problem in wich a blue screen appeared and the pc reboots...from the error report it is a problem with the graphics card and/or display driver.
I did take it to my local retailer for repair but the problem still remains(gone there 3 TIMES! each time waiting for more than a month for repair!and they did send it to toshiba service...)... as the problem doesnt happen *all the time* it seems they just didnt notice or something :(.
I did update all the drivers but it had no effect on the problem...
So now what?? Do I send it to repair and they finally replace the graphics card...but I pay??!!
This is all very upsetting for me as you might imagine...
And know its worse...it seems to be happening more and more...and many times the computer wont reboot after the bluescreen...it just stays black.
Now almost every time i turn it on it wont boot...the fan will just work for a few seconds and thats it.
Im almost certain the graphics card is defective...can I replace it at home? Argh this just feels wrong, the computer had this problem almost from the start and I sent it for repair...they just did not fix it...I shouldnt have to pay to fix it as I sent it for repair 3 times while it still had the warranty...
Please reply I'm desesperate and have no idea what to do

Hi Andrej and thanks for the reply
But the thing is I have already done that countless times...and the problem is still there...same old same old :(
I have tried seemingly everything...thats why I say its gotta be hardware :S
Having this in mind Id like to know if there is anything I can do(concerning hardware) without resorting to Toshiba service
Keep in mind that Im pretty sure it is the graphics card that is faulty(I dont know if its onboard or not)
Also sometimes when I turn it on the graphics on my pc go weird like an abstract painting or something lol...thats another reason to think its the graphics card.
So anyone can help me?
Thanks in advance for your replies :D

Blue screen appears on startup and at shutdown

A few months ago, I bought a macbook pro and it was doing fine. But recently, every time it starts, a blue screen appears for a split second then it goes to log- in. Then, every time I shutdown, it will also show up for a split second then shutdown. It doesn't affect the computer but I'm just wondering how to stop it.

I couldn't rember what time it started so, I shut down my computer and the blue screen appereed at 8:39:28. But went I turned it on, the blue screen did not show. So, I turnned it of and on again and no blue screen. I did it several times and now the blue screen isn't showing. But I will post the test that showed in the concel during 8:39, when it powered of blue, to the time I powed it on, when the blue screen did not show. If you need more, I will try to give it to you. I'll post again if it shows up again. Also I should edit out ethernet address too right?
Here's what its says:
8:38:07 PM kernel: I0Surface: buffer allocation size is zero
8:38:47 PM kernel: I0Surface: buffer allocation size is zero
8:39:28 PM mds: (Error) Server: ==== XPC handleXPCMessage XPC_ERROR_CONNECTION_INVALID
8:39:28 PM com.apple.launched.peruser.501: (com.apple.talagent.[236]) Exited: Killed: 9
2/19/12 8:39:28.145 PM
com.apple.launchd.peruser.501
([0x0-0x18018].com.apple.iTunesHelper[284]) Exited: Killed: 9
2/19/12 8:39:28.145 PM
com.apple.launchd.peruser.501
([0x0-0x13013].com.apple.AppleSpell[260]) Exited: Killed: 9
2/19/12 8:39:28.147 PM
com.apple.launchd.peruser.501
(com.apple.mdworker.pool.0[452]) Exited: Terminated: 15
2/19/12 8:39:28.203 PM
loginwindow
DEAD_PROCESS: 36 console
2/19/12 8:39:28.467 PM
shutdown
halt by ___________:
2/19/12 8:39:28.467 PM
shutdown
SHUTDOWN_TIME: 1329701968 466888
2/19/12 8:39:54.000 PM
bootlog
BOOT_TIME 1329701994 0
2/19/12 8:40:06.000 PM
kernel
PMAP: PCID enabled
2/19/12 8:40:06.000 PM
kernel
Darwin Kernel Version 11.3.0: Thu Jan 12 18:47:41 PST 2012; root:xnu-1699.24.23~1/RELEASE_X86_64
2/19/12 8:40:06.000 PM
kernel
vm_page_bootstrap: 986092 free pages and 54292 wired pages
2/19/12 8:40:06.000 PM
kernel
kext submap [0xffffff7f8072f000 - 0xffffff8000000000], kernel text [0xffffff8000200000 - 0xffffff800072f000]
2/19/12 8:40:06.000 PM
kernel
zone leak detection enabled
2/19/12 8:40:06.000 PM
kernel
standard timeslicing quantum is 10000 us
2/19/12 8:40:06.000 PM
kernel
mig_table_max_displ = 73
2/19/12 8:40:06.000 PM
kernel
TSC Deadline Timer supported and enabled
2/19/12 8:40:06.000 PM
kernel
AppleACPICPU: ProcessorId=1 LocalApicId=0 Enabled
2/19/12 8:40:06.000 PM
kernel
AppleACPICPU: ProcessorId=2 LocalApicId=2 Enabled
2/19/12 8:40:06.000 PM
kernel
AppleACPICPU: ProcessorId=3 LocalApicId=4 Enabled
2/19/12 8:40:06.000 PM
kernel
AppleACPICPU: ProcessorId=4 LocalApicId=6 Enabled
2/19/12 8:40:06.000 PM
kernel
AppleACPICPU: ProcessorId=5 LocalApicId=1 Enabled
2/19/12 8:40:06.000 PM
kernel
AppleACPICPU: ProcessorId=6 LocalApicId=3 Enabled
2/19/12 8:40:06.000 PM
kernel
AppleACPICPU: ProcessorId=7 LocalApicId=5 Enabled
2/19/12 8:40:06.000 PM
kernel
AppleACPICPU: ProcessorId=8 LocalApicId=7 Enabled
2/19/12 8:40:06.000 PM
kernel
calling mpo_policy_init for TMSafetyNet
2/19/12 8:40:06.000 PM
kernel
Security policy loaded: Safety net for Time Machine (TMSafetyNet)
2/19/12 8:40:06.000 PM
kernel
calling mpo_policy_init for Sandbox
2/19/12 8:40:06.000 PM
kernel
Security policy loaded: Seatbelt sandbox policy (Sandbox)
2/19/12 8:40:06.000 PM
kernel
calling mpo_policy_init for Quarantine
2/19/12 8:40:06.000 PM
kernel
Security policy loaded: Quarantine policy (Quarantine)
2/19/12 8:40:06.000 PM
kernel
Copyright (c) 1982, 1986, 1989, 1991, 1993
2/19/12 8:40:06.000 PM
kernel
The Regents of the University of California. All rights reserved.
2/19/12 8:40:06.000 PM
kernel
MAC Framework successfully initialized

Blue screen appears & Information about Archive & Install option.

Similar Messages

Maybe you are looking for