Blue Screen during Windows install on SATA Raid1

Hi Folks!
I have a BIG problem with my brand new Eclipse SLI.
I can't install Windows (tried Vista and XP x64). It crashes already in the beginning!!!
I'm not an OC,yet so all my settings are like default or AUTO. Only my memory I set to 1600 through automatic settings.
Flashed in a brand new 1.6 BIOS.
Now, anytime I start the Windows setup if crashes with a blue screen when it comes to the point it tries to access the hard discs.
I was already able to set up a new partition and then Visat was extracting files. But after a few minutes (1% finished) it crash.
The blue screen indicates that it had problems to write a file.
Thing is ... it's always at different times, but still at the beginning of the setup. Sometime it don't get the setup even running.
I tried the Drive Booster RAID and the JMicron. Always created a new RAID1!
Sometimes the board freezed even by entering the BIOS.
I already figured it my be to hot.
Here my temperatures. CPU: 28- 35C, IOH: 50-68C, System: 35C
But I already read that IOH temperatur seems normal.
So what's the problem?
PLEEEEEAAAASSEEEEE HEEEEEEEEEELP !!!!

Thanks!
Found myself a solution. Deactivated all additional features in the BIOS. Now it'S working even with 1600 RAM frequency.
Trying now to still do some OC without getting into the same trouble.
Jan.

Similar Messages

MSI NF980-G65 Blue Screen during Windows XP Install - HELP !!!

I have a MSI NF980-G65 motherboard and it works great with Windows 7 but I can't install Windows XP Home edition 32 bit. Win XP checks hardware, then loads all initial files and when the blue screen with the license agreement should pop open I get a blue screen with an error message that says the computer was stopped to prevent damage to the hardware, that the HDD might not have enough room on it and/or the BIOS might need updating.
The HDD has Win 7 on it and it's a 250GB drive so there should be more than enough room on the HDD and the NF980 came with the latest BIOS v1.4
Anyone have any experience and a fix so I can install Win XP ? Thanks

Then the problem is elsewhere, as that was fixed with SP1.
Or his disk doesn't even contain that level.
However, when pre-partitioned to NTFS even without SP1 should install.
I doubt the problem is his CDrom.
What he needs to do is get http://www.bootdisk.com/ntfs.htm
Run NTFS4DOS and do a checkdisk.
Yes that will solve his problem, as Windows (from 2000 to W7) are to stupid to do a checkdisk when the disk is in a certain state.
And even a Windows bootdisk can't solve it and crashed with the error he has.
Only Linux or NTFS-DOS can do a check disk and restore the error M$-NTFS makes it failing too boot or reinstall.

Black screen during Windows install

Hello,
I have a late 2012 27-inch iMac with the GeForce 680MX 2GB graphics card. I'm trying to install Windows 7 or Windows 8 using Boot Camp, but neither works.
In either case, I can use the Boot Camp Assistant to create a bootable USB install disk, download the latest Windows support software from Apple, and partition the drive to allocate space for the Windows installation.
As soon as I partition the drive, the iMac restarts and tries to boot into Windows. But the only thing I ever see is a black screen (no blinking cursor), no matter how long I wait.
This seems like the exact same issue that plagued the late-2009/mid-2010 iMacs,
http://support.apple.com/kb/TS3173
In other words, it looks like the drivers included with the default Windows install disk don't work on the late 2012 iMac, at least not when configured with the 680MX.
Since this looks like the old problem but Apple doesn't appear to have provided drivers for the new iMac yet (the older iMacs above used ATI graphics, not NVIDIA), I tried to add the latest NVIDIA notebook graphics card drivers to the Windows install disk using the directions here,
http://superuser.com/questions/501812/corrupt-graphics-during-windows-8-installa tion
In particular, I used these drivers,
http://www.geforce.com/drivers/results/55125
They're not explicitly supporting the 680MX (I couldn't find any drivers for it in NVIDIA's website) but they do support the 680M and a whole slew of other cards. Thought it was worth a try.
Anyway, that didn't do the trick. Still the black screen for me.
Any ideas? Have others had this issue with the new iMacs?
Thanks

OK, I figured it out.
You know how the Boot Camp Assistant gives you three options? Create Windows Boot Disk, Download Latest Drivers, Install. You basically need to do all three at once, from scratch.
I'm not sure exactly when in the last couple of months, but Apple updated their drivers. A few days ago I gave this another shot. Initially I tried using the USB stick I had previously created, but using some of the links at the first post above, I tried to inject the new NVidia drivers provided by Apple. That didn't help. I got the black screen and all that all over again.
But then I just tried to start from scratch, remaking the USB stick while simultaneously downloading the drivers. It then also asked me if I wanted to install a new helper tool. I never got that prompt before. Either that tool solved it, or when it was creating the boot disk now it was injecting the new drivers itself in some different way.
Whatever it was, try starting from scratch and going through all the steps and you might be successful in classic "it just works" Apple fashion. Took them a couple of months, but they got there.

Why am I getting a blue screen during windows support software installation?

After intalling windows 7 x64 (using boot camp 5.1), when I come to install windows support software to set up apple drivers for windows to run on my MacBook pro (late 2013), after installing a good number of drivers, I get suddenly a blue screen!....
What can I do, once windows is not strting up? It started well, but wth no proper drivers. Thanks.

I guess the first thing I would do would be to boot up using the original installation DVD and correct the permissions. That may not be the problem at all, it could be an incomplete upgrade install but at least you would know it isn't a permissions problem. I'd also run or verify the hard disk using this method.
How is it done? Turn machine on. Insert DVD 1 of the Install Disks, restart the machine, hold down the Command and the C keys (that tells the machine to look to the Rom drive and boot from it). Once it is up (will take a long minute or so...) go up to the top left where the install menu buttons are listed, look for the disk utility and run it. Tell it to verify and repair the disk and repair the permissions. Once done, quit the Disk Utility and select the restart option. Wait to see if your original desktop comes back.
If not, then you'll need to either "back out" the upgrade you installed or install your backup. If you don't have a backup you'll probably have to re-install OS X all over again (and probably lose all your previous data, apps, etc.). Let's hope it clears up first before you have to re-install.
Lisa

FM2-A75MA-E35 blue screens running windows install

Just built using A10 5800k cpu, 4 gigs ADATA ddr3 1600 memory.
This is an upgrade motherboard. Trying to do a repair/reinstall of Win XP Pro.
System blue screens while booting from the windows CD.
I downloaded the latest bios and put it on a thumb drive. The bios update utility says there are no bios files on the thumb drive other than the one I backed up.

what XP version you are trying to install?
does it have SP3 on it?

Lenovo 1051 blue-screened during windows 10 update

Hello, I downloaded the Windows 10 update and in the middle of the update, the tablet crashed. I'm receiving a start up message saying my tablet needs to restart. It restarts then give error code 0x0000225. It says press windows key to access UEFI tools. Press the windows key nothing happens. After boot i've held f8 and looked at the boot options and nothing. I've held f10 and went to some weird BIOS command type screen, it appears my recovery partition has been corrupted during the update. Not really sure what left to do. I've looked all over the place and no one seems to be in the same situation. I really hope I didn't just brick the whole thing when I got it last september. THANKS FOR ANY HELP IN ADVANCE! Jordan

I had a similar issue with my Tablet Lenovo MIIX 2 8. I was not able to reset my PC using the recovery tool. You may want to try and build a Win10 USB bootable and boot/install from the USB. I was able to refresh my Tablet with a clean install and works like charm now. Hope this helps.

Audigy 4 gives blue screen during install of drivers on Windows XP SP3

FAudigy 4 gives blue screen during install of drivers on Windows XP SP3! Specs
Asus a8n-sli
GB RAM
6600 GT
Audigy 4
LC Power 550 W PSU
I put in the installation CD that comes with the card. I want to install everything (full install), and mid-install I get a blue screen.
I then uninstalled everything and tried only to install the updated drivers from the website in safe-mode and still a blue screen. Should I get the dump file and send it to Creative?
How do get this card to work like it should? I also have a remote control that came together with the card.
Im currently using the onboard AC97 Realtek ALC850 soundcard.
Whats the whole procedure to make this work? Detailed please. How do I eliminate all traces of the audigy on my PC?

Re: Audigy 4 gives blue screen during install of drivers on Windows XP SP38 Perhaps you'd want to read this old thread of mine about my misadventures with the same exact card you are trying to use. IMHO that card was not worth the time and money I spent on it (even even less the time and money it caused me to spend afterwards to repair the damage it caused.
Message Edited by CreativeSkeptic on 2-23-2008 0:4 PMMessage Edited by CreativeSkeptic on 2-23-2008 0:4 PM

Toshiba M305D : blue windows screen during the install of Windows 7 / Vista, no Audio on Windows XP

Dear Users
Last week I had a clean install of Windows 7 64bit on my M305D-S4830 laptop.
I've used this OS on this machine before, and it worked fine.
After installing Win7, the device manager showed 2 unknown devices. First I've installed the O2 multimedia card reader, and it went ok. Secondly I've installed for the unknown device "hdmi audio" a hdmi audio driver from ATi, since the notebook has AMD 780V chipset and a Radeon HD3100 (it hasn't any hdmi output, but I didn't want to have any unknown devices).
And my nightmare begun.
While restarting after the driver upgrade, my brand new Win 7 boot hang on blue screen code: 0x00000124, which is common for many hardware and software faults. I ran safe mode to clean the system from the hdmi audio driver, but the catalyst install manager dind't let me to remove it. Since it was a fresh install on a formatted HDD, I took the time for another clean install (20 mins). But during the Win 7 install, the installer hang on blue screen, guess what, code: 0x00000124. I changed to the factory-backup Win Vista disks of my laptop, but Vista had the same problem, I couldn't install this OS either, blue screen during install, too.
I took a Win XP Prof SP3 as a last option, and I could finally install it. But after the install, I had problems with the Radeon HD3100, I couldn't install the driver from the .exe, I had to make it from the device manager via properties/I choose to/graphics adapters/own disk. So I don't have the control centre, but the display works in 1280x800.
The bigger problem is: no sound.
The device manager in Win XP shows only one unknown audio device: the hdmi audio. I can't install the conexant drivers, because it says I don't have the device for that. When I install the ATi hdmi driver for XP, I get the blue screen with the error 0x00000124. Nice.
I have updated bios, and made a proper format with the partititons deleted, but it didn't helped. I think the Vista/7 install crashes at the point, when it tries to install the audio driver during OS install, because the XP was running until I have tried to install it, too. But I can't configure the Vista/7 install not to try loading it.
So my laptop is only comnpatible with XP, the install of Vista or 7 crashes. And in XP, I have got no audio devices, therefore no sound. You can imagine, how glad I am looking at my Harman/Kardon speakers right now...
Any ideas?
Alex

Satellite M305D-S4830
Any ideas?
Alex, restore the hard disk to its original out-of-the-box contents using Toshiba recovery media. If you didn't burn them, order the discs.
Order Toshiba Recovery Media
If it doesn't run properly after that, you have a hardware malfunction.
-Jerry

I5 17''MBP gets blue screen during install windows 7 32 bit

Hello all:
I heard that quite many people get classic windows' "blue screen" during using windows , whatever Windows XP, Vista or 7. But now i face the "blue screen" during install Windows 7, which means I even can not complete installation.
I bought my Macbook Pro i5 17'' one month ago, and I'm trying to install Windows 7 but I face the problem during the installation. After finishing first 4 steps the computer would restart and start to "finish installation", but at this time it gets "blue screen" and shows "error: 0x0000009c" and stuck there. I have to shut down the turn off button and interrupt the installation.
I don't know if there's any one else face this unlucky situation. I searched on the net and it says the problem could be from memory, graphic card (too new), or even overlocking the cpu,whatever it must be the problem of hardware. I thought it might be the problem of compatible.
If anyone knows how to deal with this problem??!! I do need to use some software under Windows system!

It is good to see that it is indeed a USB2.
The support software on the USB is used in the Pre-boot environment setup and provides drivers for Apple specific hardware, GPU, BT, Mouse, etc. You can verify that by looking at the USB contents. The DVD contains generic drivers when hardware is not recognized as defaults to use. Apple does enough 'secret sauce' to make them different. The following does not explicitly state the USB2 need when using the DVD Installer and mentions W8 (not W7).
From Boot Camp: Creating an ISO image from a Windows installation DVD - Apple Support
Insert a blank USB 2 flash drive that is a least 16GB in size into a USB port on the computer. Boot Camp Assistant uses this drive to store the Windows 8 install media and support drivers during installation of Windows.
Note: This flash drive needs to be formatted for the FAT32 file system and must use the Master Boot Record partitioning scheme. Use Disk Utility to check the format of the flash drive before proceeding, and partition or erase the flash drive if necessary.
I suspect the GPU is not getting the correct driver and the Installer fails. The Generic VGA should work. From the OS X side, can you see files in your BC volume? If yes, can you look for logs in the BC volume at the following locations.
./Windows/Inf/setupapi.dev.log
./Windows/Inf/setupapi.offline.log
./Windows/Inf/setupapi.setup.log
./Windows/Logs/SetupCleanupTask/setupact.log
./Windows/Logs/SetupCleanupTask/setuperr.log
./Windows/Panther/FastCleanup/setupact.log
./Windows/Panther/FastCleanup/setuperr.log
./Windows/Panther/setupact.log
./Windows/Panther/setuperr.log
./Windows/Panther/UnattendGC/setupact.log
./Windows/Panther/UnattendGC/setuperr.log
./Windows/setupact.log
./Windows/setuperr.log
./Windows/System32/Sysprep/Panther/IE/setupact.log
./Windows/System32/Sysprep/Panther/IE/setuperr.log

Black screen during windows 7 install on 27inch iMac

My iMac turns to a black screen during windows 7 boot camp install. I can use the install disk on my wifes Macbook Pro so I know that the media is good.

Please re-post in the Boot Camp forum.

Blue screen after fresh install 8.1

I keep getting errors, of blue screen right after install...And after all that typing i get this message... that I can't post links/images... so Here I post a log.Log Name: SystemSource: Microsoft-Windows-Kernel-PowerDate: 20-2-2014 21:34:14Event ID: 41Task Category: (63)Level: CriticalKeywords: (2)User: SYSTEMComputer: AWMDescription:The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.Event Xml:<Event xmlns="://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Microsoft-Windows-Kernel-Power" Guid="{331C3B3A-2005-44C2-AC5E-77220C37D6B4}" /> <EventID>41</EventID> <Version>3</Version> <Level>1</Level> <Task>63</Task> <Opcode>0</Opcode> <Keywords>0x8000000000000002</Keywords> <TimeCreated SystemTime="2014-02-20T20:34:14.758130700Z" /> <EventRecordID>347</EventRecordID> <Correlation /> <Execution ProcessID="4" ThreadID="8" /> <Channel>System</Channel> <Computer>AWM</Computer> <Security UserID="S-1-5-18" /> </System> <EventData> <Data Name="BugcheckCode">239</Data> <Data Name="BugcheckParameter1">0xffffe001fe921580</Data> <Data Name="BugcheckParameter2">0x0</Data> <Data Name="BugcheckParameter3">0x0</Data> <Data Name="BugcheckParameter4">0x0</Data> <Data Name="SleepInProgress">0</Data> <Data Name="PowerButtonTimestamp">0</Data> <Data Name="BootAppStatus">0</Data> </EventData></Event>
Above you can see the log name, not sure if you can read it, I've put it in a code block.
I thought it was my RAM that was default/bad /corrupt. So I bought new ones, but the problem keeps ocuring. I re-installed my windows 8.1 using new RAM, but it keeps giving me "windows/freeze lag" and then blue screen.
See logs.
Log Name: System
Source: Microsoft-Windows-Kernel-Power
Date: 20-2-2014 21:24:04
Event ID: 41
Task Category: (63)
Level: Critical
Keywords: (2)
User: SYSTEM
Computer: AWM
Description:
The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
Event Xml:
<Event xmlns="://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Kernel-Power" Guid="{331C3B3A-2005-44C2-AC5E-77220C37D6B4}" />
<EventID>41</EventID>
<Version>3</Version>
<Level>1</Level>
<Task>63</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000002</Keywords>
<TimeCreated SystemTime="2014-02-20T20:24:04.336182100Z" />
<EventRecordID>253</EventRecordID>
<Correlation />
<Execution ProcessID="4" ThreadID="8" />
<Channel>System</Channel>
<Computer>AWM</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="BugcheckCode">239</Data>
<Data Name="BugcheckParameter1">0xffffe0007c3e1080</Data>
<Data Name="BugcheckParameter2">0x0</Data>
<Data Name="BugcheckParameter3">0x0</Data>
<Data Name="BugcheckParameter4">0x0</Data>
<Data Name="SleepInProgress">0</Data>
<Data Name="PowerButtonTimestamp">0</Data>
<Data Name="BootAppStatus">0</Data>
</EventData>
</Event>
Log Name: System
Source: Microsoft-Windows-Kernel-Power
Date: 20-2-2014 19:45:24
Event ID: 41
Task Category: (63)
Level: Critical
Keywords: (2)
User: SYSTEM
Computer: AWM
Description:
The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
Event Xml:
<Event xmlns="://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Kernel-Power" Guid="{331C3B3A-2005-44C2-AC5E-77220C37D6B4}" />
<EventID>41</EventID>
<Version>3</Version>
<Level>1</Level>
<Task>63</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000002</Keywords>
<TimeCreated SystemTime="2014-02-20T18:45:24.960461300Z" />
<EventRecordID>218</EventRecordID>
<Correlation />
<Execution ProcessID="4" ThreadID="8" />
<Channel>System</Channel>
<Computer>AWM</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="BugcheckCode">0</Data>
<Data Name="BugcheckParameter1">0x0</Data>
<Data Name="BugcheckParameter2">0x0</Data>
<Data Name="BugcheckParameter3">0x0</Data>
<Data Name="BugcheckParameter4">0x0</Data>
<Data Name="SleepInProgress">0</Data>
<Data Name="PowerButtonTimestamp">0</Data>
<Data Name="BootAppStatus">0</Data>
</EventData>
</Event>
My set up:
Processors AMD FX-6300 Black Edition
motherboard/Moederborden ASRock 970 Extreme3 R2.0
Memory intenral/ Geheugen intern Crucial Ballistix Tactical BLT2C4G3D1608ET3LX0CEU
GPU/ Videokaarten MSI R9 270X GAMING 2G
Internal Driive/ Interne harde schijven Seagate ST1000DX001, 1TB
PC case/ Behuizingen Corsair Carbide 200R Closed
PSU / Voedingen Seasonic S12II-Bronze 430W

I keep getting errors, of blue screen right after install...And after all that typing i get this message... that I can't post links/images... so Here I post a log.Log Name: SystemSource: Microsoft-Windows-Kernel-PowerDate: 20-2-2014 21:34:14Event ID: 41Task Category: (63)Level: CriticalKeywords: (2)User: SYSTEMComputer: AWMDescription:The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.Event Xml:<Event xmlns="://schemas.microsoft.com/win/2004/08/events/event"> <System> <Provider Name="Microsoft-Windows-Kernel-Power" Guid="{331C3B3A-2005-44C2-AC5E-77220C37D6B4}" /> <EventID>41</EventID> <Version>3</Version> <Level>1</Level> <Task>63</Task> <Opcode>0</Opcode> <Keywords>0x8000000000000002</Keywords> <TimeCreated SystemTime="2014-02-20T20:34:14.758130700Z" /> <EventRecordID>347</EventRecordID> <Correlation /> <Execution ProcessID="4" ThreadID="8" /> <Channel>System</Channel> <Computer>AWM</Computer> <Security UserID="S-1-5-18" /> </System> <EventData> <Data Name="BugcheckCode">239</Data> <Data Name="BugcheckParameter1">0xffffe001fe921580</Data> <Data Name="BugcheckParameter2">0x0</Data> <Data Name="BugcheckParameter3">0x0</Data> <Data Name="BugcheckParameter4">0x0</Data> <Data Name="SleepInProgress">0</Data> <Data Name="PowerButtonTimestamp">0</Data> <Data Name="BootAppStatus">0</Data> </EventData></Event>
Above you can see the log name, not sure if you can read it, I've put it in a code block.
I thought it was my RAM that was default/bad /corrupt. So I bought new ones, but the problem keeps ocuring. I re-installed my windows 8.1 using new RAM, but it keeps giving me "windows/freeze lag" and then blue screen.
See logs.
Log Name: System
Source: Microsoft-Windows-Kernel-Power
Date: 20-2-2014 21:24:04
Event ID: 41
Task Category: (63)
Level: Critical
Keywords: (2)
User: SYSTEM
Computer: AWM
Description:
The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
Event Xml:
<Event xmlns="://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Kernel-Power" Guid="{331C3B3A-2005-44C2-AC5E-77220C37D6B4}" />
<EventID>41</EventID>
<Version>3</Version>
<Level>1</Level>
<Task>63</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000002</Keywords>
<TimeCreated SystemTime="2014-02-20T20:24:04.336182100Z" />
<EventRecordID>253</EventRecordID>
<Correlation />
<Execution ProcessID="4" ThreadID="8" />
<Channel>System</Channel>
<Computer>AWM</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="BugcheckCode">239</Data>
<Data Name="BugcheckParameter1">0xffffe0007c3e1080</Data>
<Data Name="BugcheckParameter2">0x0</Data>
<Data Name="BugcheckParameter3">0x0</Data>
<Data Name="BugcheckParameter4">0x0</Data>
<Data Name="SleepInProgress">0</Data>
<Data Name="PowerButtonTimestamp">0</Data>
<Data Name="BootAppStatus">0</Data>
</EventData>
</Event>
Log Name: System
Source: Microsoft-Windows-Kernel-Power
Date: 20-2-2014 19:45:24
Event ID: 41
Task Category: (63)
Level: Critical
Keywords: (2)
User: SYSTEM
Computer: AWM
Description:
The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
Event Xml:
<Event xmlns="://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="Microsoft-Windows-Kernel-Power" Guid="{331C3B3A-2005-44C2-AC5E-77220C37D6B4}" />
<EventID>41</EventID>
<Version>3</Version>
<Level>1</Level>
<Task>63</Task>
<Opcode>0</Opcode>
<Keywords>0x8000000000000002</Keywords>
<TimeCreated SystemTime="2014-02-20T18:45:24.960461300Z" />
<EventRecordID>218</EventRecordID>
<Correlation />
<Execution ProcessID="4" ThreadID="8" />
<Channel>System</Channel>
<Computer>AWM</Computer>
<Security UserID="S-1-5-18" />
</System>
<EventData>
<Data Name="BugcheckCode">0</Data>
<Data Name="BugcheckParameter1">0x0</Data>
<Data Name="BugcheckParameter2">0x0</Data>
<Data Name="BugcheckParameter3">0x0</Data>
<Data Name="BugcheckParameter4">0x0</Data>
<Data Name="SleepInProgress">0</Data>
<Data Name="PowerButtonTimestamp">0</Data>
<Data Name="BootAppStatus">0</Data>
</EventData>
</Event>
My set up:
Processors AMD FX-6300 Black Edition
motherboard/Moederborden ASRock 970 Extreme3 R2.0
Memory intenral/ Geheugen intern Crucial Ballistix Tactical BLT2C4G3D1608ET3LX0CEU
GPU/ Videokaarten MSI R9 270X GAMING 2G
Internal Driive/ Interne harde schijven Seagate ST1000DX001, 1TB
PC case/ Behuizingen Corsair Carbide 200R Closed
PSU / Voedingen Seasonic S12II-Bronze 430W
Please update your powersupply to a 1000 watt and you good to go, don't be so cheap, a 400wtt for a monster like that. jeez man are you on something.
Good psu is the most important part of a computer
You do not need to buy a 1000 watt power supply. Best way to determine how much PSU power you need can be calculated here:
http://www.thermaltake.outervision.com/
My guess would be to get one around 650-750 watts. Having more is always nice because it leaves you room for growth but also remember that technology is improving everyday and hardware is utilizing less power than previous editions and it keeps getting better.
I personally would only recommend getting a 1000 watt PSU if you are doing serious overclocking, and/or running more than one high end gpu such as SLI or CrossFire.
I have a system right now that I'm using which is i7 4770k, 16gb ram, 560Ti, SSD, and one mechanical HD, and I'm using a 600 watt PSU on Windows 8.1. The system is stable and never has problems with power.
gluck
BS, a gamer needs all the power we need more so when I over clock.
Edit: I had a high Q PSU 750watt lasted 5 months playing bf3. I had 100 thousand minutes playing in 5 months. The psu over heated. When I took it apart to lookscey, the transformers were finished. If you plan on overclocking like I did you will need the
higher watt psu. Don't fall into I told ya so.
I was then running subzero temps so my overclocking was extreme. 3.5 Ghz running 5GHZ, Memory to voltages all over clocked. Video OC to its max, hard ware flashed OC'ed.
If your going to be a pencil pusher with your computer then do whatever but he said a gaming computer
The COUGAR GX V3 High-End PSU

Blue screen in windows 7

I have been getting the blue screen after windows has been running for a while. Sometimes it happens when I am trying to install something. I have uploaded minidump files to the sky drive but I can't seem to read them, I tried copying and pasting them to
the desktop and opening them as notepad files but all I get is gibberish, at least it is to me. I need to know how to make these accessible to the pros so I can repair this problem. I have the Technical information from the blue screen here:
A clock interrupt was not received on a secondary processor within the allocated time interval.
*** stop 0x000000101 (0x0000000000000031, 0x0000000000000000, 0xFFFFF88002FD3180, 0x0000000000000003)
Don't know if this helps but there it is.
I am running Windows 7 P 64 bit desk top
Gigabyte MB GA-MA78Gm-S2H Rev 1.0
4GB Crucial Ballistix PC6400 800 Mhz 2Volt BL2CP25664A80A
AMD PHENOM 9750 2.4Ghz QUAD CORE
CPU temp was 32-34 degrees C last time I checked.
Disk error check was inconclusive ( I walked away and when I returned windows had loaded ) I assume this means that no errors were found.
RAM scanned and no errors were found.
https://skydrive.live.com/?mkt=en-US#cid=74B3C1D7DE3540EC&id=74B3C1D7DE3540EC!130

Alan
These worked but were inconclusive 0oease run driver verifier to pin down the misbehaving driver.
These crashes were related to memory management (probably caused by a driver).
Please run these tests to verify your memory and find which driver is causing the problem. Since this appears to be a driver I would start with driver verifier.
If you are overclocking (pushing the components beyond their design) you should revert to default at least until the crashing is solved. If you don't
know what it is you probably are not overclocking.
1-Memtest. (You can read more about running memtest here)
2-Driver verifier (for complete directions see our wiki here)
Co-Authored by JMH3143
Wanikiya and Dyami--Team Zigzag

Skype causing Blue Screen on Windows 7

I just recently acquired a new computer and after installing Skype the second I log in it causes a blue screen of my computer. I tried a few times and the same happened everytime. Anyone else sharing this problem?

Blue screen on Windows 7? Wow. I've never managed to get BSOD on any of my Win7 PCs.
But what may cause this - no idea, really.
Добавляйте баллы, если моё сообщение вам помогло. Спасибо!
Возврат денег | Система обновления подписок | Заблокировали/взломали аккаунт? | Пропали контакты? | Не зайти в Skype/не добавляются контакты? | Не удалось загрузить базу данных?
Подписки | Цены

HT3986 i get a black screen during windows 7 installation on bootcamp 5.0.1

i get a black screen during windows 7 installation on bootcamp 5.0.1 , it wont install

Hi wb2009,
I haven't found that the TV would be an issue, but did find an article that states to not have extra USB devices connected.
Boot Camp: Windows installation boots to black screen with blinking cursor
http://support.apple.com/kb/TS4536
The Windows installation may boot to a black screen with a blinking cursor. This can occur if you use a USB optical drive or USB Flash drive for the Windows installation and another USB device is also connected to the computer.
There's another article that mentions Windows XP or Vista that may apply.
Archived - Boot Camp: Start up to black screen after installing Windows
http://support.apple.com/kb/TS2600
Thank you for visiting Apple Support Communities.
Nubz

My laptop become blue screen after windows logo, after i update the graphic ati and intel driver

I have constant blue screen after windows logo and i have updated all drivers. i was upset the blue screen didn't go away and i did the factory reset. For my suprise, it didn't solve the problem and then i repair it at the comp shop. it was installed with windows 7 home premium 64 (pavilion g4 1006tx) bit as the pre installed windows and activated with the key back on sticker. I updated all drivers and i noticed every time i update the ati and intel driver it will go blue screen after windows logo. after i uninstall it at in safe mode it can load normally. My question is there any solution for my graphic card or is it already damaged? or any other hardware problem? please because i have to use high graphic as i use photoshop

hii
make sure you download and update correct driver version of graphic
and know spec
more:
http://support.hp.com/us-en/drivers/selfservice/HP-Pavilion-g4-Notebook-PC-series/5046252/model/5068...
try to instal "AMD High-Definition Graphics Driver" only
and uninstal "Intel High-Definition (HD) Graphics Driver"
Wisnu Suryandi

Blue Screen during Windows install on SATA Raid1

Similar Messages

Maybe you are looking for