Blue screen error 1033

I am getting Blue Screen error 1033. Following is link of .dmp file
https://skydrive.live.com/redir?resid=D0DC1B82B20BAC80%21121

Hi,
The Bug_Check D1 CAUSE netio.sys which is a Windows component which means something else drove it into Fault. Most likely are the combination of third party security programs and the network drivers.
Generally, you may update BIOS and other hardware drivers first.
Do you have any third party security programs installed?
If so, please temporarily disable all the third party security programs and test the issue.
Meanwhile, you may reinstall or update the drivers for the network related device.
In addition, I would like to suggest you refer to the links below to check the issue:
Bug Check Code 0xD1:
http://msdn.microsoft.com/en-us/library/windows/hardware/ff560244%28v=vs.85%29.aspx
Stop error when you resume a computer that is running Windows 7 or Windows Server 2008 R2 from sleep or from hibernation: "STOP: 0x000000D1"
http://support.microsoft.com/kb/978982
Hopefully you could resolve your issue soon.
Regards,
Blair Deng
Blair Deng
TechNet Community Support

Similar Messages

Blue Screen error while playing game.

I have Compaq Presario CQ3530IX Desktop PC.
Windows 7 32-bits.
When I play game the computer restart and gives Blue screen error.
But acttually there is no Blue screen coming it just giving that error.
After restart it give this error.
Problem signature:
Problem Event Name:   BlueScreen
OS Version:   6.1.7601.2.1.0.256.1
Locale ID:   1033
Additional information about the problem:
BCCode:   116
BCP1:   C2289510
BCP2:   987975BC
BCP3:   C000000D
BCP4:   00000003
OS Version:   6_1_7601
Service Pack:   1_0
Product:   256_1
Files that help describe the problem:
C:\Windows\Minidump\052013-30482-01.dmp
C:\Users\hp\AppData\Local\Temp\WER-117390-0.sysdata.xml
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt
I tried re-installing viedo card and direct X.
I also tried to search for virus with Quick Heal but no virus was found.
I was also able to play this game before.
This problem started when I installed Company of Heroes game.
Now I can't play any games.
Please help thanks.

Hello pleurisy,
Your system is getting an error when trying to play a game.
This might be caused by the system getting too hot.
Do a hard reset.
Turn the computer off.
Remove the power cable and the battery.
Hold down the power button for 15 sec while booth power sources are removed.
This should reset the hardware in the computer.
As you turn it back on tap the F10 key. This will load BIOS setup utility.
Press F9 to load defaults.
Press F10 to save and exit.
When the computer boots back up, check to see if everything is working.
If your still getting the error, go to HP.com and update the BIOS.
Here is a link to the update.
Also make sure that the system does not have a buildup of dust inside the system.
Take the side panel off and clean the inside of the computer with compressed air.
Let me know how everything goes.
Have a good day.

Blue screen error "windows has recovered from a unexpected shutdown"

Hi guys
I am using laptop & everyday it will unexpectedly shutdown and shows Blue screen error "windows has recovered from a unexpected shutdown"...Pls help me to resolve this issue.
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.48
Locale ID: 1033
Additional information about the problem:
BCCode: d1
BCP1: 00000030
BCP2: 00000002
BCP3: 00000000
BCP4: 8F2DA8A5
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1
Files that help describe the problem:
C:\Windows\Minidump\062614-23836-01.dmp
C:\Users\Venkateshwara swamy\AppData\Local\Temp\WER-74552-0.sysdata.xml
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

It could be some driver compatibility issues.
http://msdn.microsoft.com/en-us/library/windows/hardware/ff560244(v=vs.85).aspx
http://blogs.technet.com/b/askcore/archive/2008/11/01/how-to-debug-kernel-mode-blue-screen-crashes-for-beginners.aspx
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Blue screen error 1e on windows server 2008 r2

Hi Friends,
Please help me, I am facing with blue screen error 1e, Kindly help me to fix this issue,
Problem signature:
Problem Event Name:   BlueScreen
OS Version:   6.1.7601.2.1.0.274.10
Locale ID:   1033
Additional information about the problem:
BCCode:   1e
BCP1:   0000000000000000
BCP2:   0000000000000000
BCP3:   0000000000000000
BCP4:   0000000000000000
OS Version:   6_1_7601
Service Pack:   1_0
Product:   274_3
Files that help describe the problem:
C:\Windows\Minidump\112914-22651-01.dmp
C:\Users\Administrator\AppData\Local\Temp\WER-73289-0.sysdata.xml
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

Hi ramesh84,
Please updating to latest BIOS, latest drivers, particularly to NIC driver（Base on my experience)and
monitor the server for the next reoccurrence of the issue. If you install any new application or install any update please uninstall them first for the troubleshooting. Because we need to analyze the crash dump file to narrow down the root cause of the issue.
Unfortunately, it is not effective for us to debug the crash dump file here in the forum. I would like to suggest that you contact Microsoft Customer Service and Support (CSS) via telephone so that a dedicated Support Professional can assist with your request.
To obtain the phone numbers for specific technology request please take a look at the web site listed below:
http://support.microsoft.com/default.aspx?scid=fh;EN-US;OfferProPhone#faq607
Hope the issue will be resolved soon.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Blue Screen Error in Windows 7

Hi .
I've been experiencing blue screen error in these past few days. Please help me out.
the error i'm getting is
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.256.1
Locale ID: 1033
Additional information about the problem:
BCCode: 50
BCP1: FD7FADFC
BCP2: 00000000
BCP3: 97BD1BCA
BCP4: 00000000
OS Version: 6_1_7600
Service Pack: 0_0
Product: 256_1
Files that help describe the problem:
C:\Windows\Minidump\033014-24741-01.dmp
C:\Users\Fashion Details\AppData\Local\Temp\WER-47720-0.sysdata.xml
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

Hi,
This indicates that invalid system memory has been referenced.
For more information, please refer to the following article:
Bug Check 0x50: PAGE_FAULT_IN_NONPAGED_AREA
http://msdn.microsoft.com/en-us/library/windows/hardware/ff559023(v=vs.85).aspx
If it doesn't help, please collect Minidump files and upload to OneDrive.
=================
1. Click "Start", input "SYSDM.CPL" (without quotation marks) in the “Search” bar and press “Enter”.
2. Switch to the "Advanced" tab and click the "Settings" button under "Startup and Recovery".
3. Under "Write debugging information" section, make sure the "Small memory dump (128KB)" option is selected.
4. Make sure "%SystemRoot%\Minidump" is in the "Small dump directory" open box and click “OK”.
If the system crash again, please refer to the following steps to collect memory dump files:
1. Click “Start”, type “%SystemRoot%\Minidump" (without quotation marks) in “Search” bar and press “Enter”.
2. Go to your Desktop, right-click on it and create a new folder named "Dump".
3. Copy all the memory dump files (looks like [Mini092008-01.dmp]) in Minidump to this folder.
4. Right-click on the Dump folder, click "Send To", and click "Compressed (zipped) Folder".
5. Upload to OneDrive.
Karen Hu
TechNet Community Support

Blue screen error while instaling.

Hy
I get the blue screen error when i install the flash player.
Windows 7 32 bit
Firefox 16.0.1 32 bit
I had the older flash version but i removed it tryng to solve the problem but no succses.
This is the version i try to install
11.4.402.287
i dont remember the older one.but it was making updates every time a newer version was coming.
This is the error
Problem signature:
Problem Event Name:    BlueScreen
OS Version:    6.1.7601.2.1.0.256.1
Locale ID:    1033
Additional information about the problem:
BCCode:    d1
BCP1:    01000018
BCP2:    00000002
BCP3:    00000000
BCP4:    82221031
OS Version:    6_1_7601
Service Pack:    1_0
Product:    256_1
Files that help describe the problem:
C:\Windows\Minidump\101312-16005-01.dmp
C:\Users\Silviu\AppData\Local\Temp\WER-25896-0.sysdata.xml
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

Hello pleurisy,
Your system is getting an error when trying to play a game.
This might be caused by the system getting too hot.
Do a hard reset.
Turn the computer off.
Remove the power cable and the battery.
Hold down the power button for 15 sec while booth power sources are removed.
This should reset the hardware in the computer.
As you turn it back on tap the F10 key. This will load BIOS setup utility.
Press F9 to load defaults.
Press F10 to save and exit.
When the computer boots back up, check to see if everything is working.
If your still getting the error, go to HP.com and update the BIOS.
Here is a link to the update.
Also make sure that the system does not have a buildup of dust inside the system.
Take the side panel off and clean the inside of the computer with compressed air.
Let me know how everything goes.
Have a good day.

Windows Blue Screen Error Message Appears As Soon As IPod Connected

Everytime I connect my IPod to my computer, I get the Windows Blue Screen error message. Thought it was the cable, so plugged cable in by itself. No problem. Uninstalled IPod and ITunes software and then plugged in IPod, still got the Blue Screen. The Blue Screen says something about "recent plugged in device problem". It is not the cable, it must be the IPod. Did not have this problem when I bought it. Tried it on labtop and get the same error message. I can't do updater or anything that requires me to plug the IPod into a computer because the Blue Screen appears immediately. When I unplug, the Blue Screen remains and locks up the computer so I have to restart each time. I have tried everything I can think of. Please help.

Hi Mike thank you for replying,
I am not able to start the computer in safe mode, safe mode with networking, last good known configuration etc, Each time it quickly blue screens and restarts about two secs into the process.
I was unable to try a clean OS install from the disk as it gave the blue screen error shown in the original post. The same thing happened when I tried to use the repair option on the XP home disc. So i can't get into the computer at all to start diagnosing the fault, the only clue I have is the error message, and after searching the internet I haven't found much enlightenment from that yet.
If you can help me out or suggest where to search it would be much appreciated.
Thx

Itunes blue screen error

I recently installed itunes from the disk that came with the ipod nano.
The problem I'm having is that when you open itunes with or without the ipod connected it crashed the computer. I rang apple and they said its a windows problem although they did suggest I download version 6 from their web site which I did and the problem still exists. I rang microsoft support and they said it was an apple problem
The problem doesn't happen all the time, around say 80% the computer shots down with a blue screen error message saying " A problem has been detected and windows
has been shut down to prevent damage to your computer.
PageFault_In_NonpagedArea
The technical information is:
STOP 0x00000050 (0xBB9EA29E,0x00000000,0x805-DA81,0x00000002) Then it
goes onto say beginning to dump physical memory, dumping physical memory to disk.
Can anyone help.
Regards

Hello,
I followed this recommendation for one of the other discussions to at least get the blue screens to stop for a while. So far so good. Try this to see if it helps. Make sure you sequence exactly or else blue screens will appear again. Good luck!
BE
Re: USB Device Not Regonized
Posted: Dec 26, 2005 8:11 AM in response to: Chaos Atheist Reply Email
I spent hours last night and today, when something simple actually worked!
If you've uninstalled/reinstalled recently, don't bother. The problem is probably the nano, NOT the computer.
Reset your nano. Move the hold switch until you see orange, then back again, lay it on the table and press the center of the wheel and menu at the same time and hold until you see the apple (6 to 10 seconds).
Then plug your cable into your computer's usb first, then connect the ipod to it. Wait. Hope it works for you

Blue screen error message on Satellite Pro A10

Hi,
I'm trying to help my inlaws with their Satellite Pro SPA10. I had set this up for them a few months ago and it was running really well.
Now it restarts about two seconds past the "use last good configuration" etc. screen, gets to this screen again then restarts immediately ad infinitum, never pausing on the error mesage for long enough to see what it says.
I managed to get it to boot from the windows XP home disc and got as far as the repair or continue with installation screen. When I asked the computer to do either it crashes to blue screen almost immediately. The error message is
*** STOP: 0x000000c5 (0x00000000, 0x00000002, 0x00000001, 0x8082B98B)
This is beyond my level of expertise, can anyone help?
Thanks

Hi Mike thank you for replying,
I am not able to start the computer in safe mode, safe mode with networking, last good known configuration etc, Each time it quickly blue screens and restarts about two secs into the process.
I was unable to try a clean OS install from the disk as it gave the blue screen error shown in the original post. The same thing happened when I tried to use the repair option on the XP home disc. So i can't get into the computer at all to start diagnosing the fault, the only clue I have is the error message, and after searching the internet I haven't found much enlightenment from that yet.
If you can help me out or suggest where to search it would be much appreciated.
Thx

I am trying to connect my iPad to my windows pc ( xp) but it does not recognise the iPad and I get a blue screen error causing the pc to shut down. Any ideas

I am still not able to connect my iPad 2 to my Pc ( windows xp). When I try to do so I get a blue screen error and the computer shuts down. I have reinstalled iTunes. iPod works fine. Any ideas?

Not sure, but try these.
Disable your firewall and anitvirus software temporarily.
Restart the iPad by holding down on the Sleep button until the red slider appears and then slide to shut Off. To power up hold the Sleep button until the Apple logo appears and let go of the button.
Reset the iPad by holding down on the Sleep and Home buttons at the same time (for about 10-15 seconds) until the Apple logo appears (ignore the red slider), then let go of the buttons.
 Cheers, Tom

Satellite A300D-1EI - blue screen error - display drivers had failed

I 've bought my laptop a month ago.
Everything is working great except two "blue screen" errors caused by the graphics card.
Both were when the laptop was connected with TV through S-video port.
First was when the laptop display turned off after 15 minutes while watching a movie, on resume said that display drivers had failed and then I got the blue screen. Then I updated the display drivers from ATI's website and set the laptop display not to turn off.
All were ok with no problems, until last night when I got another message that display drivers had failed followed by a blue screen.
I am wondering if this is a driver's problem or is something wrong with my graphics card.
System Info:
Processor: Intel Core 2 Duo CPU T8400 @ 2.26 GHz
Memory (RAM): 3.00 GB
System Type: 32-bit Windows Vista Home Premium
Display Adapter: ATI Mobility Radeon HD 3470

So long you use ATI driver from ATI support page there is no possibility to say anything about it.
This driver is not tested and Toshiba cannot offer any help about it.
So what you can do is to install OS again using recovery media and see what will happen in the future. Please test it intensively with clean preinstalled operating system. Don't install anything that can have some negative influence to this game or additional applications, codecs or something similar.
Test it please and let us know if the problem persists.
When you want to watch movies on TV at first switch to the TV and then start DVD player.

Lenovo N 500 Blue Screen Error

I just purchased this laptop in February and shortly thereafter I started to get the blue screen error message. It only happens after the screen tries to wake up from hibernation. I have not been able to turn hibernation off.
The system has Windows Vista Home Basic; Version 6.0; Build 6001P1
Any help would be greatly appreciated. I just don't know what to do and when I tried using the lenovo care, it said that the update service would not be available until May. This is already the middle of May.
Thank you
Message Edited by WLove on 05-17-2009 08:03 PM

you can see the error properly if you disable this option
just uncheck the option.you can get this dialog box if you go to advanced system properties
Its not an easy thing for me as well,you may get solution for your BSOD in micrsoft support. thats why i was asking for more info regarding your error
Message Edited by vijaysaradhi on 05-18-2009 11:35 AM
Message Edited by vijaysaradhi on 05-18-2009 11:36 AM
Cheers and regards,
• » νιנαｿѕαяα∂нι ѕαмανє∂αм ™ « •
●๋•کáŕádhí'ک díáŕý ツ
I am a volunteer here. I don't work for Lenovo

Getting Blue Screen error BCCode: 1a

Sometimes mi PC with windows VISTA have espontaneus Blue Screen Error.Then after startup I would get this message,can someone tell me what I shshould do?
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.0.6002.2.2.0.768.3
Locale ID: 11274
Additional information about the problem:
BCCode: 1a
BCP1: 00041790
BCP2: C08020AC
BCP3: 0000FFFF
BCP4: 00000000
OS Version: 6_0_6002
Service Pack: 2_0
Product: 768_1
Files that help describe the problem:
C:\Windows\Minidump\Mini093014-01.dmp
C:\Users\jgalante\AppData\Local\Temp\WER-61171-0.sysdata.xml
C:\Users\jgalante\AppData\Local\Temp\WER140F.tmp.version.txt
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=50163&clcid=0x0c0a

Hi,
Bug Check 0x1A: The MEMORY_MANAGEMENT bug check has a value of 0x0000001A. This indicates that a severe memory management error occurred.
You can refer to the link below for more details about this error:
http://msdn.microsoft.com/en-us/library/windows/hardware/ff557391(v=vs.85).aspx
When you encounter a BSOD (Blue Screen of Death) in Windows the computer will save information regarding the error message in a log file. This log file or minidump file is saved in the Minidump subdirectory under Windows (C:\Windows\MiniDump). Generally
the information saved in this minidump file can help pinpoint the cause of the blue screen error message and help you in resolving the problem.
Roger Lu
TechNet Community Support

BLUE SCREEN ERROR!!! - Stop: 0x00000124 (0x00000003 0x00000000 0x000000000 0x00000000)

hi,
When i restart my Windows 2008 R2 server,suddenly a blue screen appeared. In the screen the message was like,
System malfunction call your hardware vendor for support. After getting this message i gave a force restart but while booting
i got another blue screen error in which i got the below error code
Stop: 0x00000124 (0x00000003,0x00000000,0x000000000,0x00000000) and after dumping physical memory(100%) the system is keep on restarting as it happened before with blue screen.
In the server machine LCD display i am getting another error message like,
E1716 Chipset IERR. Bus 0 Dev 20. Function 2 . Review &. clear SEL.
Can anyone help me to understand the actual problem and how come i can resolve this?...

This from the Dell web site.
The system BIOS has reported a chipset internal error that resides in bus ##, device ##, function ##.
Check the SEL for more information, and then clear the SEL. Remove AC power to the system for 10 seconds, and restart the system (SEL = System Event Logs)
So I probably contact the hardware vendor.
http://msdn.microsoft.com/en-us/library/windows/hardware/ff557321(v=vs.85).aspx
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Blue screen error on resume, Sandisk U3 suspected

Hi all, I have a T61 running WinXP. I've noticed that whenever the machine goes into hibernation with my flash drive inserted it crashes with a blue screen error on resumption. The drive i a sandisk cruzer with u3. Wondering if anyone has experience with this or knows of a solution - uninstalling u3 is not ideal.
[updated 2008-11-04] I've done some quick tests to try to isolate what's causing the problem. I tried another flash drive (with u3) and the same problem occurred. However when I disable the u3 launcher the problem does not occur.
Thanks!
Message Edited by t61tt on 11-04-2008 04:41 PM

So long you use ATI driver from ATI support page there is no possibility to say anything about it.
This driver is not tested and Toshiba cannot offer any help about it.
So what you can do is to install OS again using recovery media and see what will happen in the future. Please test it intensively with clean preinstalled operating system. Don't install anything that can have some negative influence to this game or additional applications, codecs or something similar.
Test it please and let us know if the problem persists.
When you want to watch movies on TV at first switch to the TV and then start DVD player.

Blue screen error 1033

Similar Messages

Maybe you are looking for