Blue screen error after updating to iOS8

After I updated my OS to iOS8.0.2...... I am getting a blue screen error again and again.
WHenever I will be using any application or opening any new application suddenly it will close with a blue screen.Then iPad restarts By itself.
PLease suggest.

Hi Chinmayee,
If your iPad is restarting unexpectedly, I would suggest that you troubleshoot using the steps in this article -
iOS: Device unexpectedly restarts, displays Apple logo, or powers off
Thanks for using Apple Support Communities.
Best,
Brett L

Similar Messages

STOP 0x0000007B Blue Screen Error after updating drivers for my P67A-C45

Hi!
I recently updated the drivers for my mainboard MSI P67A-C45. I did this with the update utility that follows this product. I choose the "update all" function so I'm not really sure what was actually updated but I remember seeing the bios and my realtek network drivers in the list of stuff being updated. Anyway, during (what I think was) the update of my BIOS (a CMD window appeared and started executing tasks) my computer suddenly restarts. I wasn't really paying attention during this process but it seemed like it wasn't finished and that the restart was unintentional.
Now during boot I get a Blue Screen message at the "Starting Windows" logo. The Blue Screen flashes by and my computer restarts instantly. It's a STOP 0x0000007B message which probably has to do with the drivers I just tried to update.
I have Windows 7 64-bit and I have tried the startup repair and the system restore function without any success.
Any ideas?
Can I revert these updates or maybe install the original drivers without formatting my hdd? I have the original CD that came with the board.
Best Regards
Victor

AHCI is a mode setting for the SATA controllers. You will find it in Integrated Peripherals. If you haven't set it to AHCI, it normally defaults to IDE mode. X79 platform being the exception. Yes. Remove LU5 & download & install all driver updates & such manually.
If your UEFI/BIOS did get flashed by LU5, I would recommend to remove the power cord from the PSU, remove the battery for awhile, clear CMOS, reset all the settings, especially check in the OC Section, CPU Features. Check to make sure there are no '0's showing. I don't know what your CPU is, so I don't know what to tell you to set the Core Ratio limit for each core if they are in fact sitting on 0. Disable Spread Spectrum & EuP 2013.

Blue Screen Error after Synching

I had Blackberry Desktop Manager 7 installed on my WIndows XP machine...I have been getting Blue screen errors frequently after my Outlook is synched wiht the device..I was on BDM 6 prior to this and used to consistently get Blue Screen Errors. I used to think there was some other issue with the laptop until recently when I got a new one and I installed The desktop manager.
Once i realised that, I uninstalled the Software from my desktop yesterday but I read a lot of blogs that said that the BSOD will continue to come as your normal uninstalls are incomplete..Could you let me know how this can be fixed? Do you have a stable version of the desktop manger that doesnt give a BSOD?
I need to sync my device with Outlook everyday..and I cannot afford BSOD's everyday..

Hi and Welcome to the Community!
I suggest this thread:
http://supportforums.blackberry.com/t5/Desktop-Software-for-PC/Cleanly-quot-Starting-Over-quot-with-...
It starts with a process for cleanly starting over, and there is some discussion, and there is also a post (15) with links to older Desktop Software versions, if those are needed. Note that this is not, by any means, guaranteed to work...but it has worked for many to resolve issues they are having.
BSOD's are actually more rare of a problem, from what I've seen, and often indicate something more core wrong with the actual PC, Windows installation, or something else...and the RIM Desktop Software is simply revealing this deeper flaw rather than being the cause of it. In the worst case scenarios, I've actually heard of folks doing a clean rebuild of their PC (e.g., reinstalling Windows from scratch) and that rectifying the problem.
Ohhh...one last thing:
jinugeorge wrote:
Do you have a stable version of the desktop manger that doesnt give a BSOD?
FYI -- From the wording, I suspect you are misunderstanding the purpose of these forums. This is a user-to-user community, not a user-to/from-RIM channel for any communication whatsoever. So, by "Do You", you are actually asking that of other users, "out there", just like you who happen to be volunteering time to help others out.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Blue screen errors - critical updates - XP SP2 SP3 - device drivers

We initially had an internal program error on an XP program that caused it to quit running. We
started getting blue screen errors that I could not resolve.
(painfully) I reinstalled XP sp2 after:
removing the boot partition, ran delux tools (complete) with not errors, repartitioned boot camp
(the long way), reformated the windows partition, (long way).
I went back and forth getting the windows and apple updates after installing XP until it said I only
needed SP3, which I was not yet ready to go to.
I still got errors and crashes, even with no applications running except Norton antivirus (only).
I left the unit on over night and had 24 save dumps in the event viewer. I checked for win updates
again and express said only sp 3 was available. I decided tocheck for custom updates.
Custom told me there were 102 critical updates. I tried to install them. They all downloaded but
98 of them would not install.
I convinced myself I had done something wrong and repeated the process with the same result.
In that the updates would not install, did I really need them or was boot camp/windows misinformed?
I installed sp 3. (boot camp 2.1) Seems to be running OK but with some errors in the eventvwr and
some more crashes.
I compared with another unit and could not replicate the errors. The other unit (same setup) had two user accts. while my broken set up had one that came up right away with reboots.
I added a second user and the crashes (though not all eventvwr errors) went away. Is this another
boot camp/windows xp issue?
I wanted to know how to find which device drivers and which versions I am running. That seems to
relate more directly to blue screen errors if they return.
Thanks,
-um

Hi and welcome to Discussions,
sorry to hear about such a misery.
Sadly Windows XP does not offer such a 'list' of hardware components and associated drivers.
Only way is to use the Device Manager (from Control Panel - System - Hardware) and click through the components to find out which driver version is used.
On a personal sidenote: I would stay away from any kind of Norton products either in Windows and/or OS X.
Searching around in these Forum you will find numerous mentions of problems with Norton products running.
Good Luck
Stefan

Blue screen error after USB connection

hello, I have a new 8100. All is great, all is working, but the problem appeared after I installed the software and I connected the mobile to the computer by USB... the blue screen error of Windows Vista appeared and then
after the automatic reboot of my computer
it said the following mistakes:
"Firma con problemas:
Nombre del evento de problema: BlueScreen                        ( name of the problem )
Versión del sistema operativo: 6.0.6000.2.0.0.768.3             ( OS version )
Id. de configuración regional: 3082                                    ( regional configuration ID )
Información adicional del problema:                                    ( aditional info on the problem )
BCCode: 4e
BCP1: 0000009A
BCP2: 0003EA16
BCP3: 00000006
BCP4: 00000002
OS Version: 6_0_6000
Service Pack: 0_0
Product: 768_1
Archivos que ayudan a describir el problema:       ( files which help to describe the problem )
C:\Windows\Minidump\Mini010609-03.dmp
C:\Users\antonio\AppData\Local\Temp\WER-110323-0.sysdata.xml
C:\Users\antonio\AppData\Local\Temp\WER6C68.tmp.version.txt
Lea nuestra declaración de privacidad:
http://go.microsoft.com/fwlink/?linkid=50163&clcid=0x0c0a
I hadn't anything wrong with my Vista OS before
thanks in advance
Solved!
Go to Solution.

Hi and welcome to the forums!
I don't read Spanish very well, but did you leave the Blackberry plugged in when you
rebooted the PC? Vista might have tried to used the BB as a drive for error checking or system functions.
Thanks,
Bifocals
Click Accept as Solution for posts that have solved your issue(s)!
Be sure to click Like! for those who have helped you.
Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

Satellite L675D: Blue Screen error after upgrading to Windows 8

Hello,
I've recently upgraded my Toshiba laptop to Windows 8 and every time I use it, after 5-10 minutes, I get a blue screen page of error and the laptop restarts.
The problem is really annoying.
I've discovered that if I don't plug in the battery charger, the laptop works normally, but I'd like to solve the problem properly.
What should I do?

> I've installed Windows 8 Pro with a regular activation key: I had Windows 7 before and I simply updated it to Windows 8. >I don't know about the drivers.. I think that may be the problem, but I also reckon the drivers are ok! Do you know a good way to check it out? Or where I can find the proper drivers?
Windows 8 drivers for Satellite L675D dont exist on Toshiba EU driver page. The L675D series does not support Windows 8.
However, even if the drivers are not available and Windows 8 is not supported, it should not be a big problem to run this system on the Satellite L675D.
You said that you simply updated the Win 7 to Win 8.
Maybe you should try a clean installation of Windows 8?
I think its worth a try in case its an software problem.
By the way: I assume this kind of problem did not appear using Windows 7. Right?

Blue screen error after converting physical to virtual server using disk2vhd

I have used the sysinternals disk2vhd to create the c: drive from a Dell server. I was able to create a virtual server and boot but had licensing issues. After a support call and doing a repair install to change licensing I am now getting a: "a process or
thread crucial to system operation has unexpectedly exited or been terminated" after the virtual machine boots and I log on. I tried to get the integration services installed but the server wouldn't stay running long enough.
Any suggestions for resolution would be appreciated.

Hi,
Have you tried the suggestion? I want to see if the information provided was helpful. Your feedback is very useful
for the further research. Please feel free to let me know if you have addition questions.
Best regards,
Vincent Hu

Blue screen error Windows 7 after June 2014 Windows updates

Hi,
just wondering if someone could help determine the cause of a blue screen error from interpreting the following minidump file. My PC has been having blue screen problems after getting the automatic windows updates recently. Initially the only way I could
get the computer working was to restore the system back to prior to the updates. The updates seem to have now successfully installed but are still causing occasional blue screen errors. I have Windows 7 Home Premium
The minidump is 061614-32666-01 andthe link is as follows:
https://onedrive.live.com/redir?resid=1665B282DEF2D2DC%21111
Any help would be appreciated

Hi,
just wondering if someone could help determine the cause of a blue screen error from interpreting the following minidump file. My PC has been having blue screen problems after getting the automatic windows updates recently. Initially the only way I could
get the computer working was to restore the system back to prior to the updates. The updates seem to have now successfully installed but are still causing occasional blue screen errors. I have Windows 7 Home Premium
The minidump is 061614-32666-01 andthe link is as follows:
https://onedrive.live.com/redir?resid=1665B282DEF2D2DC%21111
Any help would be appreciated
These crashes were related to memory corruption (probably caused by a driver).
Please run these tests to verify your memory and find which driver is causing the problem.
If you are overclocking (pushing the components beyond their design) you should revert to default at least until the crashing is solved. If you don't
know what it is you probably are not overclocking.
Since it is more likely to be a driver please run verifier first.
1-Driver verifier (for complete directions see our wiki here)
If verifier does not find the issue we can move on to this.
2-Memtest. (You can read more about running memtest here)
If you cannot boot after enabling verifier reboot into safe mode
In Vista & win & (F8)
In win 8 http://www.howtogeek.com/107511/how-to-boot-into-safe-mode-on-windows-8-the-easy-way/
Co-Authored by JMH3143
Wanikiya and Dyami--Team Zigzag

Satellite P20-771: Blue screen error message after OS reinstalling

I have a laptop Satellite P20-771 / Pentium 4 3.40GHz (800/HTT) / XP Home/ 17' with nVidia Geo5700 driver.
As I had some problems with software, and I reinstalled everything using the provided CDs. Unfortunately the computer keeps malfunctioning giving me blue screen errors, that are due (this comes out when I sumbit the error to Microsoft) to device drivers. I updated everything (I hope) from the Toshiba page, but I am not an expert and I am worried that I missed something or that something has not been loaded in the right order or that the setting are incorrect.
Thank in advance for your help
Roberto

Hello
I have also P20 (red one) and have never had any problem after using provided recovery media. According to your posting there must be two possible reasons for blue screen:
1. you have installed some additional software that causes bluescreen or
2. there is some hardware component responsible for that (new memory module or maybe some external device connected to the unit)
Sorry but I dont see any other reason. On this way it is not easy to give precise answer and we can just speculate why this happen.

After starting iTunes 11, I get a blue screen error

So after I updated my iTunes to v11, it started up and it was great! Then I rebooted my PC. After logging in, I started iTunes 11. Nothing happened for a few minutes. Then the screen became black for half a minute or so and then I get the blue screen error. Now this is happening all the time when I start iTunes 11 or if I connect my iPod Touch 4g for starting.
Please help out!!! I want to open iTunes but knowing that I'll get a blue screen error, I can't. Please help!!! I can understand if you are getting the same problem.
Thank You!!

Not sure, but try these.
Disable your firewall and anitvirus software temporarily.
Restart the iPad by holding down on the Sleep button until the red slider appears and then slide to shut Off. To power up hold the Sleep button until the Apple logo appears and let go of the button.
Reset the iPad by holding down on the Sleep and Home buttons at the same time (for about 10-15 seconds) until the Apple logo appears (ignore the red slider), then let go of the buttons.
 Cheers, Tom

Ipad mini retina blue screen issue after ios 8 update

After update to iOS8 over wifi, my iPad Mini with Retina Display is working perfectly, however I had an issue twice since yesterday. While using it, I observed the screen became totally blue (like Windows crashing) and the ipad restarted. Anyone facing such issues?

(A) Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.
(B) Try reset all settings
Settings>General>Reset>Reset All Settings
Note: Data will not be affected but settings for Wi-Fi, FaceTime, Message, Home Sharing will be reset

Satellte L40 - After XP Setup blue screen Error

Hi,
I browsed this forum and the net and I did not find an answer, so:
I'm downgrading from Vista to Win XP on Satellte L40 (PSL48E), I created new WinXP SP2 with nLite with the AHCI drivers,
looked ok win xp setup recognized the HDD so i deleted the vista partition I created new NTFS partition Setup copied the files
and when it restarted for the first time:
I got blue screen error STOP 0x0000007E which suggest it may be BIOS incompatibilty, a post in this forum had resolved by using XP SP2, but I'm already using Install CD with XP SP2.
Now, BIOS for the model PSL48E comes only for windows flashing. and I have no Windows on my system.
Even if I reinstall vista again and flash it with XP compatible bios I'm afraid I might loose vista compatibiliy (if XP dosn't work after all)
and it will render my system useless.
Help please.

Here you will find a manual on how to install XP on an L40
Regards
JBJ

Hello. Today, I was updating my iPod Touch 4th Generation to iOS 6. I unplugged the iPod when it was during the installation because it appeared to be frozen. Now the iPod is stuck at a light blue screen even after I reset it. How do I fix it?

Hello. Today, I was updating my iPod Touch 4th Generation to iOS 6. I unplugged the iPod when it was during the installation because it appeared to be frozen. Now the iPod is stuck at a light blue screen even after I reset it. How do I fix it?

You will need to do a DFU restore by holding the home and power buttons down (while the device is plugged in to your computer) until the device's screen goes black and as soon as the screen goes black, count down from 3 and release the power/sleep button, but keep holding down the home button. Then, iTunes will say the iPod needs to be restored. The restore process will take some time and even though the iPod may appear to be frozen, don't interrupt the restore.

After adopting Firefox 19.0 as default browser, I experience numerous occurrences of Blue Screen errors with MS XP

Since I have installed Firefox 19.0 (first time installation and usage), my computer crashes several times a week: the Blue Screen Error comes up and I have to turn down my computer.
I've run all recommended system and disk checks. I also have Norton as anti-virus.
To my knowledge, Firefox is the only major modification I've made on my computer before the default started to occur.
It seems that other users have encountered similar problems with version 18 and reverting to version 17 (which I cannot do) seems to have solved their issues.
Occurences of Blue screen: when using Firefox, or while screen saver on, or etc.
Have you got reported issues of compatibility between Firefox 19 and MS XP when IE was the former internet browser?
What steps do you suggest I make?

Blue screens can't be caused by Firefox, it is what is called a userspace program, which means it can't access the kernalspace, which is what causes bluescreens. There may be something else wrong with your computer:
Check for Windows updates
Scan for malware [[Troubleshoot Firefox issues caused by malware]]
Run chkdsk
etc.

Window setup option on the boot menu after fixing Blue Screen Errors

Hello Everyone, this is my firs t request.
I spent two days fixing the Blue Screen Errors (BSoD) on my computer but one thing keeps bothering me is that everytime I start or reboot my computer, it gives me TWO OPTIONS; 1. windows xp home edition 2.windows setup (default). I want to disable the second option. I had attempted to re-install windows but later changed my mind, and found an alternative to fix the Blue Screen Errors. I believe the reason Blue Screen Errors (BSoD) showed up was that I had created a new user profile and copied over old user profile files so improperly that it duplicated drivers, and gave me a list of STOP errors with blue screens for both new and old users.
The bootini file currently shows:
[Boot Loader]
Timeout=5
Default=C:\$WIN_NT$.~BT\BOOTSECT.DAT
[Operating Systems]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Home Edition" /noexecute=optin /fastdetect
Does anyone know what to edit for the bootini file so that I don't get two options at the startup??? My system details are:
IdeaPad, S10-4231
Windows XP Home Edition SP3
4-year old
Thanks,
Lenovo User

Hi
Welcome To Lenovo Community
As per the Default Sample of Boot.ini the default value after timeout section needs to be modified
[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Home Edition" /fastdetect
Before making any changes please save a copy of Boot.ini
Save a Backup Copy of Boot.ini
<script type="text/javascript">//
loadTOCNode(2, 'summary');
// </script>
Right-click My Computer, and then click Properties.
-or-
Click Start, click Run, type sysdm.cpl, and then click OK.
On the Advanced tab, click Settings under Startup and Recovery.
Under System Startup, click Edit. This opens the file in Notepad ready for editing.
In Notepad, click File on the Menu bar, and then click Save As.
Right click in an empty area of the Save As dialog box, point to New in the context menu, and then click Folder.
Type a name for the new folder, for example temp, and then press the ENTER key to create the folder named temp.
Double-click the new folder named temp, and then click the Save button to save a backup copy of the Boot.ini file.
Please try modifying the following
Default=C:\$WIN_NT$.~BT\BOOTSECT.DAT
to
default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS
Hope This Helps
Cheers!!!
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with Kudos!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follo @LenovoForums on Twitter!

Blue screen error after updating to iOS8

Similar Messages

Maybe you are looking for