Blue screen error (BSOD) during and after installation of Windows 7

I had to reinstall Windows 7 via the recovery partition. During the installation I kept getting Blue screen errors and even now I am still getting BSOD within minutes. I have no problem in safe mode.
My laptop is a Satellite C650D-12C. I wanted to update BIOS but I can't in safe mode. What should I do next?

Recovery image saved on HDD is tested so everything should be OK with recovery image installation.
What you can try is to use Microsoft installation disc to see if the same will happen again.
If yes, Im afraid you need professional help with this. Notebook has probably valid warranty so the service guys should check this.
Have you created recovery DVD?
BTW: I think BIOS update is not solution. Recovery installation must work with this original BIOS version.

Similar Messages

  • Blue screen apears on Satellite A40 after installation from recovery CD

    Hi
    I have a Toshiba A40 and I was trying to recover the system back to factory setting with the product recovery CDs. The CD booted the systems and prompted for installation which was then completed and asked to restart the computer.
    However, after restart, the PC is not booting. A blue screen appears with a message that 'Windows cannot be started due to some problem. Please check for virus or check the harddisk'.
    I then booted the PC with another bootable CD-disk and checked for latest anti-virus which shows nothing. Then I run SCANDISK on hard drive and it also doesn show any problems.
    Please could anyone advice?
    Thanks in advance.

    Hi
    Maybe this is a stupid question but did you use the right Toshiba Recovery CD designed especially for the Sat A40 notebook?
    I read many threads here in the forum about people who has recovered or tired to recover the own notebook with different and wrong Toshiba recovery CDs.
    After such procedure the notebook will not run correctly and the BSOD could appears because the preinstalled drivers on the Tosh image are not compatible with the notebook!
    So be careful!

  • Blue screen error code 0x00000050 and 0x0000000a on T430 (234234U)

    Hi,
    I have a new T430 and it crashes with a bluescreen 0x00000050 and 0x0000000a, I have been having this issue intermittently.
    I've already checked the memory and hard drives with the: linux-bootable-cd-16.iso, with no problems.
    I tried to use the recovery tool to restome my system but I keep having the same errors.
    I used the software "BlueScreenView" to read the .dmp file, it says that it caused by address "ntoskrnl.exe + 7f1c0".
    any solution?, thanks

    marcelop5,
    Here is some additional info on ntoskrnl.exe + 7f1c0 from Microsoft, Server Forums and another Microsoft forum.
    Be AWESOME Everyday!
    Donate KUDOS and Click "Accepted Solution"
    Did someone help you today?
    Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"
    This will help the rest of the Community with similar issues identify the verified solution and benefit from it.

  • Window setup option on the boot menu after fixing Blue Screen Errors

    Hello Everyone, this is my firs t request.
    I spent two days fixing the Blue Screen Errors (BSoD) on my computer but one thing keeps bothering me is that everytime I start or reboot my computer, it gives me TWO OPTIONS; 1. windows xp home edition 2.windows setup (default). I want to disable the second option. I had attempted to re-install windows but later changed my mind, and found an alternative to fix the Blue Screen Errors. I believe the reason Blue Screen Errors (BSoD) showed up was that I had created a new user profile and copied over old user profile files so improperly that it duplicated drivers, and gave me a list of STOP errors with blue screens for both new and old users. 
    The bootini file currently shows:
    [Boot Loader]
    Timeout=5
    Default=C:\$WIN_NT$.~BT\BOOTSECT.DAT
    [Operating Systems]
    multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Home Edition" /noexecute=optin /fastdetect
    Does anyone know what to edit for the bootini file so that I don't get two options at the startup??? My system details are:
    IdeaPad, S10-4231
    Windows XP Home Edition SP3
    4-year old
    Thanks,
    Lenovo User

    Hi
    Welcome To Lenovo Community
    As per the Default Sample of Boot.ini the default value after timeout section needs to be modified
    [boot loader]
    timeout=30
    default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS
    [operating systems]
    multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Home Edition" /fastdetect
    Before making any changes please save a copy of Boot.ini
    Save a Backup Copy of Boot.ini
    <script type="text/javascript">//
    loadTOCNode(2, 'summary');
    // </script>
    Right-click My Computer, and then click Properties.
    -or-
    Click Start, click Run, type sysdm.cpl, and then click OK.
    On the Advanced tab, click Settings under Startup and Recovery.
    Under System Startup, click Edit. This opens the file in Notepad ready for editing.
    In Notepad, click File on the Menu bar, and then click Save As.
    Right click in an empty area of the Save As dialog box, point to New in the context menu, and then click Folder.
    Type a name for the new folder, for example temp, and then press the ENTER key to create the folder named temp.
    Double-click the new folder named temp, and then click the Save button to save a backup copy of the Boot.ini file.
     Please try modifying the following
     Default=C:\$WIN_NT$.~BT\BOOTSECT.DAT
     to 
    default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS
    Hope This Helps
    Cheers!!!
    Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
    Did someone help you today? Press the star on the left to thank them with Kudos!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!  This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
    Follo @LenovoForums on Twitter!

  • Blue screen error and start up failure

    i have a problem with my hp pavellion 15 notebook (n020nr) im getting various blue screen errors that keep saying all the time, when my computer is restarting it shuts down but my led s caplock and the flight mode are still on, so i just press the power button and holding it for 15 and it keeps the same, so i have to take out the battery and the charge and hold the botton for 30 seconds so after that i just unplug in  the charge and it turns on and it works fine for atleast 5 or 6 minutes and then it shows the blue screen error dpc violation and sometimes i got  driver power state fauile, the computer is not very old i got it  from Telus company  4  or 3 months ago, please if someone could help me i would really appreciate.
    P.S sorry for my english

    Hi sebastian24,
    Welcome to the HP Forums! You mentioned the Caps Lock keys stays on, does it flash at all? If so how many flashes in the pattern? This will help us determine the cause of the errors. These blue screens are commonly referred to as a Blue Screen of Death and can be quite difficult to fix. If you just purchased it you should still be in warranty, I recommend that you call HP Total Care at 1-800-474-6836 in North America or visit the link below if you are outside North America.
    http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
    Thank you,
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • After adopting Firefox 19.0 as default browser, I experience numerous occurrences of Blue Screen errors with MS XP

    Since I have installed Firefox 19.0 (first time installation and usage), my computer crashes several times a week: the Blue Screen Error comes up and I have to turn down my computer.
    I've run all recommended system and disk checks. I also have Norton as anti-virus.
    To my knowledge, Firefox is the only major modification I've made on my computer before the default started to occur.
    It seems that other users have encountered similar problems with version 18 and reverting to version 17 (which I cannot do) seems to have solved their issues.
    Occurences of Blue screen: when using Firefox, or while screen saver on, or etc.
    Have you got reported issues of compatibility between Firefox 19 and MS XP when IE was the former internet browser?
    What steps do you suggest I make?

    Blue screens can't be caused by Firefox, it is what is called a userspace program, which means it can't access the kernalspace, which is what causes bluescreens. There may be something else wrong with your computer:
    Check for Windows updates
    Scan for malware [[Troubleshoot Firefox issues caused by malware]]
    Run chkdsk
    etc.

  • Blue Screen Error when syncing ipod touch 4g 32gb with i tunes 10 on Vista

    Hi
    I'm trying to sync my ipod touch 4g with my itunes 10 using a Dell XPS with Windows Vista. After the point where the songs begin to copy (around 5 mins to 30 mins into copying) a blue screen error is caused and the computer shuts down automatically. The blue screen error ID is 2057.
    I have scanned for viruses and its clean, tested my hardrive and its all ok, and now been to apple and got a replacement ipod and usb, re-installed i tunes 10 BUT its still happening.
    i'm not sure what to do next ..any suggestions??
    BTW my computer works fine until I try syncing the ipod so it's definitely something related to it.

    Just in case anybody is interested I managed to resolve the problem. Not sure if it was a just a co-incidence but after windows had auto-removed itunes 10, I plugged in the ipod and the computer recognised it as a working piece of hardware, although it actually thought it was a camera (not sure if that's normal).
    Anyway I re-installed itunes10 but kept the ipod plugged into the usb all the time. When itunes had installed, i began the sync and the files copied far more quickly than in previous attempts. They are all on now and the ipod is working fine and no blue screen errors.
    What probably happened is that when windows auto-fixed errors after the last crash(it didn't run an auto-fix after previous crashes), it fixed the error which was crashing itunes10 when syncing. I hope nobody else has this problem and the ipod remains ok.

  • Equium A100-549: Blue Screen error during Recovery CD installation

    Hey,
    I recently purchased a Toshiba laptop, everything worked perfectly until my laptop was attacked. I got rid of the virus and went to reformat due to lots of problems occurring. The main one being a error has accursed and "Blah Blah" program needs to close. Also i kept getting loads of errors.
    http://aumha.org/win5/kbestop.htm
    Them types.
    Now then the Toshiba reformatting disk said simply put the disk into the CD drive and turn off. I did this, great. The toshiba disk said press F12 upon starting and click run the CD. The CD fires up and gets half way thro reformatting.
    I suddenly get a blue screen error. I thought oh well ill reboot and carry on. This is where the problem started. Because i was half way thro deleting/reinstalling windows i was missing some files. I go to reinstall or try to use the Toshiba CD I get a blue screen error.
    0x00000050: PAGE_FAULT_IN_NONPAGED_AREA
    (Click to consult the online Win XP Resource Kit article, or see Windows 2000 Professional Resource Kit, p. 1548.)
    Requested data was not in memory. An invalid system memory address was referenced. Defective memory (including main memory, L2 RAM cache, video RAM) or incompatible software (including remote control and antivirus software) might cause this Stop message, as may other hardware problems (e.g., incorrect SCSI termination or a flawed PCI card).
    Any ideas what i can do? I don't want to send the laptop back to Toshiba to fix however im thinking this is the only way out.
    Please if repplying try to keep technical lanuage to a minnium. Many thanks, Dan.

    Hi
    Its very strange because the installation from the Toshiba recovery CD should works properly and without any Blue screen messages.
    Usually if the BSOD appears if there is a serious software problem or something wrong with the hardware.
    I dont think that the software on the recovery CD could be corrupt.
    Did you try to install the OS from original Microsoft Windows CD? It would be very interesting to know if the blue screen will also appear.
    However, I think your notebook is new and the warranty is valid. In my opinion you should ask the Toshiba service partner for the help because the guys could start the diagnostic test and could locate the fault.

  • Blue Screen error message after using Rescue and Recovery.

    Good morning - I unfortunately had to use the IBM Rescue and Recovery feature to restore my factory settings.  However, now my computer is giving me a blue screen error during the startup process.  Unfortunately it is not on the screen long enough for me to get too much information from it, but I have been able to get win22n51.sys as being some sort of error message.  If I start the computer in safe mode it will load without the error.  If I use the safe mode plus networking it gives the error.  So I'm assuming it has something to do with the network drivers?
    I would appreciate any ideas you all have for resolving/further diagnosing this problem.
    Thank you!

    Hello,
    Perhaps this Lenovo knowledgebase article, "XP Crash: System may hang or restart with a previous version of the Intel PRO 2200BG Mini PCI adapte..." will be of help to you in resolving the problem?
    Regards,
    Aryeh Goretsky
    I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
    S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
      Deutsche Community   Comunidad en Español Русскоязычное Сообщество

  • Blue Screen Error after Synching

    I had Blackberry Desktop Manager 7 installed on my WIndows XP machine...I have been getting Blue screen errors frequently after my  Outlook is synched wiht the device..I was on BDM 6 prior to this and used to consistently get Blue Screen Errors. I used to think there was some other issue with the laptop until recently when I got a new one and I installed The desktop manager.
    Once i realised that, I uninstalled the Software from my desktop yesterday but I read a lot of blogs that said that the BSOD will continue to come as your normal uninstalls are incomplete..Could you let me know how this can be fixed? Do you have a stable version of the desktop manger that doesnt give a BSOD?
    I need to sync my device with Outlook everyday..and I cannot afford BSOD's everyday..

    Hi and Welcome to the Community!
    I suggest this thread:
    http://supportforums.blackberry.com/t5/Desktop-Sof​tware-for-PC/Cleanly-quot-Starting-Over-quot-with-​...
    It starts with a process for cleanly starting over, and there is some discussion, and there is also a post (15) with links to older Desktop Software versions, if those are needed. Note that this is not, by any means, guaranteed to work...but it has worked for many to resolve issues they are having.
    BSOD's are actually more rare of a problem, from what I've seen, and often indicate something more core wrong with the actual PC, Windows installation, or something else...and the RIM Desktop Software is simply revealing this deeper flaw rather than being the cause of it. In the worst case scenarios, I've actually heard of folks doing a clean rebuild of their PC (e.g., reinstalling Windows from scratch) and that rectifying the problem.
    Ohhh...one last thing:
    jinugeorge wrote:
    Do you have a stable version of the desktop manger that doesnt give a BSOD?
    FYI -- From the wording, I suspect you are misunderstanding the purpose of these forums. This is a user-to-user community, not a user-to/from-RIM channel for any communication whatsoever. So, by "Do You", you are actually asking that of other users, "out there", just like you who happen to be volunteering time to help others out.
    Good luck!
    Occam's Razor nearly always applies when troubleshooting technology issues!
    If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
    Join our BBM Channels
    BSCF General Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • Satellite A60-102 - Blue screen error appears on screen and system restart

    Sometime Blue screen error showing on screen and system restart
    how can solve this problem

    Hi
    What BSOD code you get exactly?
    Which OS you are using?
    Maybe its a driver problem. Have you checked the device manager for yellow exclamation marks?
    Can you boot in safe mode?

  • Satellite P20-771: Blue screen error message after OS reinstalling

    I have a laptop Satellite P20-771 / Pentium 4 3.40GHz (800/HTT) / XP Home/ 17' with nVidia Geo5700 driver.
    As I had some problems with software, and I reinstalled everything using the provided CDs. Unfortunately the computer keeps malfunctioning giving me blue screen errors, that are due (this comes out when I sumbit the error to Microsoft) to device drivers. I updated everything (I hope) from the Toshiba page, but I am not an expert and I am worried that I missed something or that something has not been loaded in the right order or that the setting are incorrect.
    Thank in advance for your help
    Roberto

    Hello
    I have also P20 (red one) and have never had any problem after using provided recovery media. According to your posting there must be two possible reasons for blue screen:
    1. you have installed some additional software that causes bluescreen or
    2. there is some hardware component responsible for that (new memory module or maybe some external device connected to the unit)
    Sorry but I dont see any other reason. On this way it is not easy to give precise answer and we can just speculate why this happen.

  • Satellte L40 - After XP Setup blue screen Error

    Hi,
    I browsed this forum and the net and I did not find an answer, so:
    I'm downgrading from Vista to Win XP on Satellte L40 (PSL48E), I created new WinXP SP2 with nLite with the AHCI drivers,
    looked ok win xp setup recognized the HDD so i deleted the vista partition I created new NTFS partition Setup copied the files
    and when it restarted for the first time:
    I got blue screen error STOP 0x0000007E which suggest it may be BIOS incompatibilty, a post in this forum had resolved by using XP SP2, but I'm already using Install CD with XP SP2.
    Now, BIOS for the model PSL48E comes only for windows flashing. and I have no Windows on my system.
    Even if I reinstall vista again and flash it with XP compatible bios I'm afraid I might loose vista compatibiliy (if XP dosn't work after all)
    and it will render my system useless.
    Help please.

    Here you will find a manual on how to install XP on an L40
    Regards
    JBJ

  • Blue screen error after USB connection

    hello, I have a new 8100. All is great, all is working, but the problem appeared after I installed the software and I connected the mobile to the computer by USB... the blue screen error of Windows Vista appeared and then
    after the automatic reboot of my computer
    it said the following mistakes:
    "Firma con problemas:
      Nombre del evento de problema: BlueScreen                        ( name of the problem )
      Versión del sistema operativo: 6.0.6000.2.0.0.768.3              ( OS version )
      Id. de configuración regional: 3082                                    ( regional configuration ID )
    Información adicional del problema:                                      ( aditional info on the problem )
      BCCode: 4e
      BCP1: 0000009A
      BCP2: 0003EA16
      BCP3: 00000006
      BCP4: 00000002
      OS Version: 6_0_6000
      Service Pack: 0_0
      Product: 768_1
    Archivos que ayudan a describir el problema:       ( files which help to describe the problem )
      C:\Windows\Minidump\Mini010609-03.dmp
      C:\Users\antonio\AppData\Local\Temp\WER-110323-0.sysdata.xml
      C:\Users\antonio\AppData\Local\Temp\WER6C68.tmp.version.txt
    Lea nuestra declaración de privacidad:
      http://go.microsoft.com/fwlink/?linkid=50163&clcid=0x0c0a
    I hadn't anything wrong with my Vista OS before
    thanks in advance
    Solved!
    Go to Solution.

    Hi and welcome to the forums!
    I don't read Spanish very well, but did you leave the Blackberry plugged in when you
    rebooted the PC? Vista might have tried to used the BB as a drive for error checking or system functions.
    Thanks,
    Bifocals
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

  • After starting iTunes 11, I get a blue screen error

    So after I updated my iTunes to v11, it started up and it was great! Then I rebooted my PC. After logging in, I started iTunes 11. Nothing happened for a few minutes. Then the screen became black for half a minute or so and then I get the blue screen error. Now this is happening all the time when I start iTunes 11 or if I connect my iPod Touch 4g for starting.
    Please help out!!! I want to open iTunes but knowing that I'll get a blue screen error, I can't. Please help!!! I can understand if you are getting the same problem.
    Thank You!!

    Not sure, but try these.
    Disable your firewall and anitvirus software temporarily. 
    Restart the iPad by holding down on the Sleep button until the red slider appears and then slide to shut Off. To power up hold the Sleep button until the Apple logo appears and let go of the button.
    Reset the iPad by holding down on the Sleep and Home buttons at the same time (for about 10-15 seconds) until the Apple logo appears (ignore the red slider), then let go of the buttons.
     Cheers, Tom

Maybe you are looking for

  • Wrong house bank suffix in bank BoE file

    Hello, The customer has two house banks defined with exactly the same account digits, but different country (one is SPAIN and another is COBRO). This is a workaround that we have applied because sometimes the bank files need to reflect the kind of co

  • Information about Planned Order convert into Purchase Requisition Job work

    Hi Expert , Can U tell me If we generate the MRP of FG in which one component Procurement type is 'BOTH' then can we convert that planned order partially into Purchase Req - Job work and Purchase Req - Normal SANDEEP

  • Oracle8i install errors on RedHat 6.1

    When I try to run /mnt/cdrom/install/linux/runInst.sh I get the following error: SIGSEGV 11* segmentation violation Full thread dump: Monitor Cache Dump: Registered Monitor Dump: Name and type hash table lock: <unowned> String intern lock: <unowned>

  • Temporary disable Font auto-activation(UTC)

    Is there a way via javascript to temporarily disable and then reenable the Extensis UTC Font auto-activation for Indesign files? I have a script that loops through and opens a file, edits it, exports it and then reverts and does it again for x number

  • Get real class of a PageItem

    Hi all, There are two ways to get a pageItem : -Document.allPageItems which is an array of extended objects of PageItem ( Rectangle, TextFrame, Oval.....) so we can have precisely the type of object we need. -Document.pageItem.itemByID() which return