Blue screen error code 0x00000050 and 0x0000000a on T430 (234234U)

Hi,
I have a new T430 and it crashes with a bluescreen 0x00000050 and 0x0000000a, I have been having this issue intermittently.
I've already checked the memory and hard drives with the: linux-bootable-cd-16.iso, with no problems.
I tried to use the recovery tool to restome my system but I keep having the same errors.
I used the software "BlueScreenView" to read the .dmp file, it says that it caused by address "ntoskrnl.exe + 7f1c0".
any solution?, thanks

marcelop5,
Here is some additional info on ntoskrnl.exe + 7f1c0 from Microsoft, Server Forums and another Microsoft forum.
Be AWESOME Everyday!
Donate KUDOS and Click "Accepted Solution"
Did someone help you today?
Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"
This will help the rest of the Community with similar issues identify the verified solution and benefit from it.

Similar Messages

  • Blue screen error code. Please help.

    late 2008 version.
    Recently my school reinstalled windows 7 but after he did that, there was some blue screen error code which only appears while running on windows and everything is fine on the mac side.
    He reinstalled windows 7 again but the blue screen error code started again. He said that it could be that my apple disc is not original which caused the error code, however last year they were able to installed windows 7 without any issue. He also said that it could be the hard drive problem.
    Another problem I have is that while on windows the hard disk drives doesn't show the mac too.
    Please help! Much appreciated if any of you can help me out.

    Unless you run a VM such as Parallels, you're not going to be able to see your Mac disk using Boot Camp. If I were you, I'd see about getting Parallels Desktop and installing Windows 7 on it. You can then inter-operate with both systems.
    Clinton

  • HELP ME PLEASE !! Blue screen error code 9c IBM T43 1872

    Hello everybody,
    I need your help please !!
    I have an laptop T43 1872. When i installed windows xp pro sp2, after 10 minutes, my laptop show a blue screen "machine_check_exception" , code error : 0,00000009c.
    After search in web, the solution is to update my bios. I do it but my problem is always here.
    Have you one solution for me ?
    Thanks you a lot of
    Mimij

    take a look at this http://www.errordecoder.com/stop-error-codes/STOP-0x0000009C.html
    Thinkpad R61 7733-1GU
    Thinkpad X61T 7762-54U
    Thinkpad X60T 6363-4GU
    Did a member help you today? Thank them with a Kudo!
    If a post answers your question, please mark it as an "Accepted Solution"!
    Regards,
    GMAC

  • Blue screen error (BSOD) during and after installation of Windows 7

    I had to reinstall Windows 7 via the recovery partition. During the installation I kept getting Blue screen errors and even now I am still getting BSOD within minutes. I have no problem in safe mode.
    My laptop is a Satellite C650D-12C. I wanted to update BIOS but I can't in safe mode. What should I do next?

    Recovery image saved on HDD is tested so everything should be OK with recovery image installation.
    What you can try is to use Microsoft installation disc to see if the same will happen again.
    If yes, Im afraid you need professional help with this. Notebook has probably valid warranty so the service guys should check this.
    Have you created recovery DVD?
    BTW: I think BIOS update is not solution. Recovery installation must work with this original BIOS version.

  • Qosmio X775 blue screen error Code 116 with OpenGL and video programs

    After updating windows I found that I was getting blue screen messages when I tried to use OpenGL in Photoshop or when I open Adobe After Effects and other video programs.
    The mini dump message is:
    ==================================================
    Dump File         : 072512-32151-01.dmp
    Crash Time        : 7/25/2012 8:46:34 PM
    Bug Check String  :
    Bug Check Code    : 0x00000116
    Parameter 1       : fffffa80`0b507010
    Parameter 2       : fffff880`0f39f4d4
    Parameter 3       : 00000000`00000000
    Parameter 4       : 00000000`00000002
    Caused By Driver  : nvlddmkm.sys
    Caused By Address : nvlddmkm.sys+19e4d4
    File Description  :
    Product Name      :
    Company           :
    File Version      :
    Processor         : x64
    Crash Address     : ntoskrnl.exe+7f1c0
    Stack Address 1   :
    Stack Address 2   :
    Stack Address 3   :
    Computer Name     :
    Full Path         : C:\windows\Minidump\072512-32151-01.dmp
    Processors Count  : 4
    Major Version     : 15
    Minor Version     : 7601
    Dump File Size    : 370,384
    ==================================================
    I've looked this up with no result. Can anyone help.  (Note: I am fairly literate but not a computer geek.)
    Sheilamacd
    Sheilamacd

    Hi there,
    Sorry for bringing this thread back up but I have the exact same laptop and the exact same problem. I believe I've had this problem since this thread has been posted, but have just come across this thread. I've done a factory reset through the built in recovery options but I still come across these errors (BSODs and graphical glitches, also from nvlddmkm.sys and 0x116 errors). Whenever I run a Furmark GPU stress test, the FPS is fine until I hear the fan turn on, which the frames then drop extremely low (5 fps or so). Once temperature of the GPU drops a bit and the fans turn off, the FPS rises again back to normal. This continues for awhile (dropping and going back up) until it crashes with an OpenGL error. I also did a Memtest to check my RAM, but it all checked out ok. At first I ordered a recovery disc because the recovery partition was not working for some reason (kept crashing/freezing). I tried it again recently and the recovery went through. I'm not quite sure if the built in recovery and the recovery media discs are different, but I'm hoping it will make a difference when it gets here. If the recovery disc does however not work, should I just assume its a hardware issue and send it to an ASP for repair? Extremely hesitant because of the high cost...Any help would be much appreciated. Been bothered by this issue for a month...

  • Blue screen error code B88B514A

    hi 
    i recently did an update and now the printer wont work 
    i get a blue screen that flashes really quickly then i think the error code is B88B514A 
    any help please ive only had it less than a month 

    Hello @hobi12,
    Welcome to the HP Support Forums!  I see you recently did an update to your HP Envy 120 and now the front panel is blue with an error code 'B88B514A'.
    I would like you to start troubleshooting here: 'Problem with Printhead,' 'Printer Failure,' 'Ink System Failure,' or a '0x...' or a 'C2...' Error M...
    'Because there are many variations of these 'Problem with Printhead,' 'Printer Failure,' or 'Ink System Failure' error messages and alphanumeric codes, we have provided a few guided steps to get you to the right troubleshooting document for your error. Select the statement that best describes your situation.'
    I hope this helps, if you are still getting the error message, call our technical support at 800-474-6836 as it may be the printers hardware and you would still be covered by factory warranty. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www8.hp.com/us/en/contact-hp/ww-phone-assis​t.html
    I hope this helps!
    Thanks,
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • I have iphone 5c in blue says error code (1) and stuck in safe mode please help? No water damage

    My iphone 5c stuck in safe mode with error code (1) cannot restore? Anyone help please ?!?

    go on the internet and type in find my iphone 5c but then once you have done that type in your apple ID then take it out of recovery mode hopefully that should work

  • Blue screen error and start up failure

    i have a problem with my hp pavellion 15 notebook (n020nr) im getting various blue screen errors that keep saying all the time, when my computer is restarting it shuts down but my led s caplock and the flight mode are still on, so i just press the power button and holding it for 15 and it keeps the same, so i have to take out the battery and the charge and hold the botton for 30 seconds so after that i just unplug in  the charge and it turns on and it works fine for atleast 5 or 6 minutes and then it shows the blue screen error dpc violation and sometimes i got  driver power state fauile, the computer is not very old i got it  from Telus company  4  or 3 months ago, please if someone could help me i would really appreciate.
    P.S sorry for my english

    Hi sebastian24,
    Welcome to the HP Forums! You mentioned the Caps Lock keys stays on, does it flash at all? If so how many flashes in the pattern? This will help us determine the cause of the errors. These blue screens are commonly referred to as a Blue Screen of Death and can be quite difficult to fix. If you just purchased it you should still be in warranty, I recommend that you call HP Total Care at 1-800-474-6836 in North America or visit the link below if you are outside North America.
    http://www8.hp.com/us/en/contact-hp/ww-contact-us.html
    Thank you,
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • Blue screen error 0x0000006B windows 7 64bit

    I have blue screen error code 0x0000006B PROCESS1_INITIALIZATION_FAILED on my vaio laptop. I tried safe mode and safe mode with command prompt and still doesnt work either. Someone help fix this issue please

    Hi,
    Which phase did you come across this error?
    Read this article to see if it's helpful to you:
    "Stop error code 0x0000006B PROCESS1_INITIALIZATION_FAILED" error message during startup on a computer that is running Windows 7 or Windows Server 2008 R2
    http://support.microsoft.com/kb/981833
    If the issue persists, like ZigZag said, after upload the minidump file into OneDrive, then share the link here.
    To share the file, prefer to this article:
    Share files and folders and change permissions
    http://windows.microsoft.com/en-in/onedrive/share-file-folder
    Karen Hu
    TechNet Community Support

  • Equium A100-549: Blue Screen error during Recovery CD installation

    Hey,
    I recently purchased a Toshiba laptop, everything worked perfectly until my laptop was attacked. I got rid of the virus and went to reformat due to lots of problems occurring. The main one being a error has accursed and "Blah Blah" program needs to close. Also i kept getting loads of errors.
    http://aumha.org/win5/kbestop.htm
    Them types.
    Now then the Toshiba reformatting disk said simply put the disk into the CD drive and turn off. I did this, great. The toshiba disk said press F12 upon starting and click run the CD. The CD fires up and gets half way thro reformatting.
    I suddenly get a blue screen error. I thought oh well ill reboot and carry on. This is where the problem started. Because i was half way thro deleting/reinstalling windows i was missing some files. I go to reinstall or try to use the Toshiba CD I get a blue screen error.
    0x00000050: PAGE_FAULT_IN_NONPAGED_AREA
    (Click to consult the online Win XP Resource Kit article, or see Windows 2000 Professional Resource Kit, p. 1548.)
    Requested data was not in memory. An invalid system memory address was referenced. Defective memory (including main memory, L2 RAM cache, video RAM) or incompatible software (including remote control and antivirus software) might cause this Stop message, as may other hardware problems (e.g., incorrect SCSI termination or a flawed PCI card).
    Any ideas what i can do? I don't want to send the laptop back to Toshiba to fix however im thinking this is the only way out.
    Please if repplying try to keep technical lanuage to a minnium. Many thanks, Dan.

    Hi
    Its very strange because the installation from the Toshiba recovery CD should works properly and without any Blue screen messages.
    Usually if the BSOD appears if there is a serious software problem or something wrong with the hardware.
    I dont think that the software on the recovery CD could be corrupt.
    Did you try to install the OS from original Microsoft Windows CD? It would be very interesting to know if the blue screen will also appear.
    However, I think your notebook is new and the warranty is valid. In my opinion you should ask the Toshiba service partner for the help because the guys could start the diagnostic test and could locate the fault.

  • Blue Screen Error when syncing ipod touch 4g 32gb with i tunes 10 on Vista

    Hi
    I'm trying to sync my ipod touch 4g with my itunes 10 using a Dell XPS with Windows Vista. After the point where the songs begin to copy (around 5 mins to 30 mins into copying) a blue screen error is caused and the computer shuts down automatically. The blue screen error ID is 2057.
    I have scanned for viruses and its clean, tested my hardrive and its all ok, and now been to apple and got a replacement ipod and usb, re-installed i tunes 10 BUT its still happening.
    i'm not sure what to do next ..any suggestions??
    BTW my computer works fine until I try syncing the ipod so it's definitely something related to it.

    Just in case anybody is interested I managed to resolve the problem. Not sure if it was a just a co-incidence but after windows had auto-removed itunes 10, I plugged in the ipod and the computer recognised it as a working piece of hardware, although it actually thought it was a camera (not sure if that's normal).
    Anyway I re-installed itunes10 but kept the ipod plugged into the usb all the time. When itunes had installed, i began the sync and the files copied far more quickly than in previous attempts. They are all on now and the ipod is working fine and no blue screen errors.
    What probably happened is that when windows auto-fixed errors after the last crash(it didn't run an auto-fix after previous crashes), it fixed the error which was crashing itunes10 when syncing. I hope nobody else has this problem and the ipod remains ok.

  • After adopting Firefox 19.0 as default browser, I experience numerous occurrences of Blue Screen errors with MS XP

    Since I have installed Firefox 19.0 (first time installation and usage), my computer crashes several times a week: the Blue Screen Error comes up and I have to turn down my computer.
    I've run all recommended system and disk checks. I also have Norton as anti-virus.
    To my knowledge, Firefox is the only major modification I've made on my computer before the default started to occur.
    It seems that other users have encountered similar problems with version 18 and reverting to version 17 (which I cannot do) seems to have solved their issues.
    Occurences of Blue screen: when using Firefox, or while screen saver on, or etc.
    Have you got reported issues of compatibility between Firefox 19 and MS XP when IE was the former internet browser?
    What steps do you suggest I make?

    Blue screens can't be caused by Firefox, it is what is called a userspace program, which means it can't access the kernalspace, which is what causes bluescreens. There may be something else wrong with your computer:
    Check for Windows updates
    Scan for malware [[Troubleshoot Firefox issues caused by malware]]
    Run chkdsk
    etc.

  • Satellite A60-102 - Blue screen error appears on screen and system restart

    Sometime Blue screen error showing on screen and system restart
    how can solve this problem

    Hi
    What BSOD code you get exactly?
    Which OS you are using?
    Maybe its a driver problem. Have you checked the device manager for yellow exclamation marks?
    Can you boot in safe mode?

  • I am trying to connect my iPad to my windows pc ( xp) but it does not recognise the iPad and I get a blue screen error causing the pc to shut down. Any ideas

    I am still not able to connect my iPad 2 to my Pc ( windows xp). When I try to do so I get a blue screen error and the computer shuts down. I have reinstalled iTunes. iPod works fine. Any ideas?

    Not sure, but try these.
    Disable your firewall and anitvirus software temporarily. 
    Restart the iPad by holding down on the Sleep button until the red slider appears and then slide to shut Off. To power up hold the Sleep button until the Apple logo appears and let go of the button.
    Reset the iPad by holding down on the Sleep and Home buttons at the same time (for about 10-15 seconds) until the Apple logo appears (ignore the red slider), then let go of the buttons.
     Cheers, Tom

  • Blue Screen error message after using Rescue and Recovery.

    Good morning - I unfortunately had to use the IBM Rescue and Recovery feature to restore my factory settings.  However, now my computer is giving me a blue screen error during the startup process.  Unfortunately it is not on the screen long enough for me to get too much information from it, but I have been able to get win22n51.sys as being some sort of error message.  If I start the computer in safe mode it will load without the error.  If I use the safe mode plus networking it gives the error.  So I'm assuming it has something to do with the network drivers?
    I would appreciate any ideas you all have for resolving/further diagnosing this problem.
    Thank you!

    Hello,
    Perhaps this Lenovo knowledgebase article, "XP Crash: System may hang or restart with a previous version of the Intel PRO 2200BG Mini PCI adapte..." will be of help to you in resolving the problem?
    Regards,
    Aryeh Goretsky
    I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
    S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
      Deutsche Community   Comunidad en Español Русскоязычное Сообщество

Maybe you are looking for