Blue Screen Error on Satellite A100-920 (PSAA9)

Hi
I had a blue screen error during normal use and after restart, Windows suggested updating the BIOS, so I updated it with the latest version (5.10). The next day, I got another blue screen and on restart, Windows suggested I update my display drivers, which I did (to ver. 8.241)... I have an ATI Radeon X1400 GPU. After doing that, the computer crashed every time it loaded windows, with a popup about services.exe telling me the computer would turn off in 60 seconds.
I assumed this was related to the display driver, so I replaced the drivers with an earlier-dated version (8.241-034065C). After I did this, it seemed to work and I could use the computer fine for a bit, even play games such as GTA but i am starting to get the blue screens again, usually just when opening folders, etc and not when running graphics-heavy applications. The problem definitely goes away when I disable my display drivers, but that's not much of a solution.
I turned off the reboot on error setting and this is the information from the blue screen of death:
*** STOP: 0x0000008E (0xC0000005,0xEE6DF5E9,0xBAD2F99C,0x00000000)
*** system32:huy32.sys - Address EE6DF5E9 base at EE6DD000, Datestamp 45abe717
Does anyone have any idea how I can sort this problem, it's driving me crazy!
I have downloaded the Omega drivers for the card, but am slow to install them as I hear they can cause overheating and I think ATI/Toshiba should be able to provide me with a solution without me having to use third party drivers.

I have Network Associates (McAfee) v. Enterprise 8. I ran a full virus scan with this and windows defender and a worm stinger utility and another microsoft app whose name I forget... all came up clean.
I tried the omega drivers out of frustration and they cause services.exe to terminate.
Could it possibly be a BIOS issue? I'm not sure how likely it is, since the computer definitely works with the display adapter enabled and will usually crash (BSOD) after anything from a few mins to a few hours with it enabled. I seem to be getting two types of reply from microsoft on restart, one saying there is a general driver fault and one saying there is a display driver fault and suggesting updating the display drivers.

Similar Messages

Blue Screen Error on Equium A100-549

Hi,
I took home a laptop that faced a blue screen error whenever it was starting up. I was provided with the essential components and did a format using the recovery CD. Once it was complete, I took out the recovery CD as instructed then clicked exit. The black window said format complete and the PC switched off. When I try turn it on an orange light flashes on one of the LEDs and the PC doesn't switch on. Most of the text was in Chinese while it was working too (the owner's Chinese). I would appreciate some assistance.
Thank you very much.

Hi
According to your description I suppose that the LED flashes all the time if the AC adaptor was connected. Am I right?
I think there is a hardware malfunction and the LED provide an blinking code.
Unfortunately, I dont think that you can solve this problem by yourself.
In my opinion a technician should check the notebook. The service guys are able to read the code and could locate the fault.

Satellite A100-920 - Audio driver problem - Win XP Pro

Hello all,
I am having an issue with an audio driver. I can't seem to find one that works anywhere, I have looked at multiple forums and the Toshiba website for suitable drivers with no success. I've basically hit a wall, so hopefully someone can provide a working solution. :)
Audio device:
Device: 82801G (ICH7 Family) High Definition Audio Controller
Manufacturer: Intel
(Details retrieved using a Ubuntu 9.04 Live CD)
Although a windows system labels it as "Realtek High Definition Audio Controller"? (I'm no expert with drivers, so maybe thats a stupid question...) :)
The computer is a Toshiba Satellite A100-920 (PSAA9E) running Windows XP Professional.
I have spent hours trying to solve this so I'm hoping this is the last mile. :) Thanks to anyone with any suggestions.
Best regards,
Alan

Hi
The sound driver is designed by Realtek!!!! So its a Realtek sound chip!
You need the Realtek sound driver and you can find it on the Toshiba European driver page as well!
You need also the SP3!
But the point is that SP3 has to be installed before sound driver!!!
If you have already installed the sound driver then remove it (uninstall).
You should also access the device manger and should remove the sound card from the device list!
Then reboot the notebook and after that install the Realtek sound driver again!!!

Blue screen error message on Satellite Pro A10

Hi,
I'm trying to help my inlaws with their Satellite Pro SPA10. I had set this up for them a few months ago and it was running really well.
Now it restarts about two seconds past the "use last good configuration" etc. screen, gets to this screen again then restarts immediately ad infinitum, never pausing on the error mesage for long enough to see what it says.
I managed to get it to boot from the windows XP home disc and got as far as the repair or continue with installation screen. When I asked the computer to do either it crashes to blue screen almost immediately. The error message is
*** STOP: 0x000000c5 (0x00000000, 0x00000002, 0x00000001, 0x8082B98B)
This is beyond my level of expertise, can anyone help?
Thanks

Hi Mike thank you for replying,
I am not able to start the computer in safe mode, safe mode with networking, last good known configuration etc, Each time it quickly blue screens and restarts about two secs into the process.
I was unable to try a clean OS install from the disk as it gave the blue screen error shown in the original post. The same thing happened when I tried to use the repair option on the XP home disc. So i can't get into the computer at all to start diagnosing the fault, the only clue I have is the error message, and after searching the internet I haven't found much enlightenment from that yet.
If you can help me out or suggest where to search it would be much appreciated.
Thx

Satellite P20-771: Blue screen error message after OS reinstalling

I have a laptop Satellite P20-771 / Pentium 4 3.40GHz (800/HTT) / XP Home/ 17' with nVidia Geo5700 driver.
As I had some problems with software, and I reinstalled everything using the provided CDs. Unfortunately the computer keeps malfunctioning giving me blue screen errors, that are due (this comes out when I sumbit the error to Microsoft) to device drivers. I updated everything (I hope) from the Toshiba page, but I am not an expert and I am worried that I missed something or that something has not been loaded in the right order or that the setting are incorrect.
Thank in advance for your help
Roberto

Hello
I have also P20 (red one) and have never had any problem after using provided recovery media. According to your posting there must be two possible reasons for blue screen:
1. you have installed some additional software that causes bluescreen or
2. there is some hardware component responsible for that (new memory module or maybe some external device connected to the unit)
Sorry but I dont see any other reason. On this way it is not easy to give precise answer and we can just speculate why this happen.

Blue Screen Error - DRIVER_IRQL_NOT_LESS_OR_EQUAL (Netwbw02.sys) - Satellite Laptop

Hi, I have been getting blue screen errors the past couple days.
The error says: DRIVER_IRQL_NOT_LESS_OR_EQUAL (Netwbw02.sys)
Attached is the dump file. Let me know if you are able to open it. Any help would be appreciated!
https://onedrive.live.com/redir?resid=B6AB1143124F198F%21442

Which Satellite? There is a label on the bottom.
Bug Check 0xD1: DRIVER_IRQL_NOT_LESS_OR_EQUAL
Caused By Driver : fvevol.sys         <--- BitLocker Drive Encryption Driver
If you saw Netwbw02.sys mentioned, give us some more .dmp files.
==================================================
Dump File         : 020215-31750-01.dmp
Crash Time        : 2/2/2015 2:14:04 PM
Bug Check String : DRIVER_IRQL_NOT_LESS_OR_EQUAL
Bug Check Code    : 0x000000d1
Parameter 1       : ffffd001`1c2c1000
Parameter 2       : 00000000`00000002
Parameter 3       : 00000000`00000001
Parameter 4       : fffff801`9eff6874
Caused By Driver : fvevol.sys
Caused By Address : fvevol.sys+15f6874
File Description :
Product Name      :
Company           :
File Version      :
Processor         : x64
Computer Name     :
Full Path         : C:\Test\020215-31750-01.dmp
Processors Count : 4
Major Version     : 15
Minor Version     : 9600
==================================================
-Jerry

Satellite L505-13W shows Blue screen error

My laptop SATELLITE L505-13W Shows blue screen error.
The os gets booted up and after some time it shows a blue screen error and restarts.
On restart it asks for repair, even after succesfull repair it showed the same error.
So i tried to recover using the recovery cd but it proved to be a tragedy.
It eraced my full HDD to stone age and smiled at me saying recovery is not possible.
please help me.......

Hi
If the notebook cannot be recovered using the recovery disk, then all this smells like hardware problem.
Are you sure that your recovery disk is OK?
Did you try to install the OS using other installation disk?
Maybe this would be useful to check if the issue might be related to the faulty recovery disk but if the BSOD (blue screen of death) appeared before the OS installation, then I would say the issue might be caused by internal hardware malfunction
It would be necessary to check the RAM modules and the HDD.
HDD can be checked using the HDD diagnostic software like Drive Fitness Test (freeware)
RAM could be checked using a tools like memtest but you need a running systemso in this case you cannot check the RAM using a software I recommend removing one module and testing the notebook using one module in each slot

Satellite A100-590 PSAA9E freezes on Toshiba welcome screen after BIOS update

Hi.
Yesterday I did a BIOS update on my Satellite A100-590 PSAA9E-03Z00QGR with the appropriate flash:
http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_driver_details.jsp?service=EU&selCategory =2&selFamily=2&selSeries=153&selProduct=624&langua ge=17&selOS=10&selType=all&yearupload=&monthupload =&dayupload=&useDate=null&mode=userMachines&search =&action=search&macId=&country=all&selectedLanguag e=17&type=all&page=1&ID=58477&OSID=-1&driverLanguage=42
bios-20070709111839.zip
After the flashing procedure the machine rebooted automatically, but unfortunately it now keeps hanging at the Thoshiba welcome screen. Also pressing F2 or F12 won't change anything. It seems like the BIOS is corrupt.
I saw, that in the BIOS package are delivered two flash files (s10gm590.rom and s10pm590.rom). But just executing the SanAntonion10 BIOS590MP.exe a .vbs script is started that decides automatically chooses and loads a flash file. Maybe it chose the wrong one?
What shall I do now? Is there a way to restore the BIOS, or do I have to send my notebook in?
Thanks in advance
MAT

> Satellite A100-590 PSAA9E freezes on Toshiba welcome screen after BIOS update
What to say Marc. It looks like you have used a wrong BIOS version or you have updated the BIOS in wrong way.
You could try to access the BIOS and try to set the settings to default.
Dont forget to save the settings if you will exit the BIOS.
But if this procedure does not help, you will have to contact the ASP in your country.
Possibly the guys will try to flash the BIOS again with other special version.
Good luck
Greetings

Satellite A300D-1EI - blue screen error - display drivers had failed

I 've bought my laptop a month ago.
Everything is working great except two "blue screen" errors caused by the graphics card.
Both were when the laptop was connected with TV through S-video port.
First was when the laptop display turned off after 15 minutes while watching a movie, on resume said that display drivers had failed and then I got the blue screen. Then I updated the display drivers from ATI's website and set the laptop display not to turn off.
All were ok with no problems, until last night when I got another message that display drivers had failed followed by a blue screen.
I am wondering if this is a driver's problem or is something wrong with my graphics card.
System Info:
Processor: Intel Core 2 Duo CPU T8400 @ 2.26 GHz
Memory (RAM): 3.00 GB
System Type: 32-bit Windows Vista Home Premium
Display Adapter: ATI Mobility Radeon HD 3470

So long you use ATI driver from ATI support page there is no possibility to say anything about it.
This driver is not tested and Toshiba cannot offer any help about it.
So what you can do is to install OS again using recovery media and see what will happen in the future. Please test it intensively with clean preinstalled operating system. Don't install anything that can have some negative influence to this game or additional applications, codecs or something similar.
Test it please and let us know if the problem persists.
When you want to watch movies on TV at first switch to the TV and then start DVD player.

Satellite Pro A300 shows blue screen error 8086...

Hi,
today laptop produced a Microsoft error message (Didn't see what it was) and it said to restart laptop.
On restart blue screen error message appeared. 0x00008086
Thanks
Paul

Hi
Did you get this BSOD only once as yet?
Maybe its just a driver issue so check the device manager for any problems.
Normally BSODs are related to RAM or HDD. You can test both components using a special test tools like Memtest86 and Drive Fitness Test. You can use Google to find both freeware programs.

Satellite A60-102 - Blue screen error appears on screen and system restart

Sometime Blue screen error showing on screen and system restart
how can solve this problem

Hi
What BSOD code you get exactly?
Which OS you are using?
Maybe its a driver problem. Have you checked the device manager for yellow exclamation marks?
Can you boot in safe mode?

Equium A100-549: Blue Screen error during Recovery CD installation

Hey,
I recently purchased a Toshiba laptop, everything worked perfectly until my laptop was attacked. I got rid of the virus and went to reformat due to lots of problems occurring. The main one being a error has accursed and "Blah Blah" program needs to close. Also i kept getting loads of errors.
http://aumha.org/win5/kbestop.htm
Them types.
Now then the Toshiba reformatting disk said simply put the disk into the CD drive and turn off. I did this, great. The toshiba disk said press F12 upon starting and click run the CD. The CD fires up and gets half way thro reformatting.
I suddenly get a blue screen error. I thought oh well ill reboot and carry on. This is where the problem started. Because i was half way thro deleting/reinstalling windows i was missing some files. I go to reinstall or try to use the Toshiba CD I get a blue screen error.
0x00000050: PAGE_FAULT_IN_NONPAGED_AREA
(Click to consult the online Win XP Resource Kit article, or see Windows 2000 Professional Resource Kit, p. 1548.)
Requested data was not in memory. An invalid system memory address was referenced. Defective memory (including main memory, L2 RAM cache, video RAM) or incompatible software (including remote control and antivirus software) might cause this Stop message, as may other hardware problems (e.g., incorrect SCSI termination or a flawed PCI card).
Any ideas what i can do? I don't want to send the laptop back to Toshiba to fix however im thinking this is the only way out.
Please if repplying try to keep technical lanuage to a minnium. Many thanks, Dan.

Hi
Its very strange because the installation from the Toshiba recovery CD should works properly and without any Blue screen messages.
Usually if the BSOD appears if there is a serious software problem or something wrong with the hardware.
I dont think that the software on the recovery CD could be corrupt.
Did you try to install the OS from original Microsoft Windows CD? It would be very interesting to know if the blue screen will also appear.
However, I think your notebook is new and the warranty is valid. In my opinion you should ask the Toshiba service partner for the help because the guys could start the diagnostic test and could locate the fault.

Satellite A200 - Blue Screen error when trying to open HWSetup

Hi,
I get a Windows Blue Screen error whenever I try to open HWSetup or access the Toshiba Flash Card using the Fn key.
Any ideas how to solve this?
Cheers!

Hello
The error message invalid serial number occurs if you try to install a software that is not designed for this notebook. Maybe you did download the HWsetup for an other notebook.
Check this!
Furthermore I have searched in the forum and maybe this could be useful for you:
http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=150557&#150557
Greets

Blue Screen error 44

Good evening,
My roommate is having some trouble with his toshiba satellite C850D and sometimes the pc crashes and gives the blue screen error 44
Problem Event Name: BlueScreen
OS Versio: 6.1.7601.2.1.0.256.48
Locale ID: 2070
BCCode: 44
BCP1: FFFFFA8003983410
BCP2: 0000000000000EAE
BCP3: 0000000000000000
BCP4: 0000000000000000
OS Version: 6_1_7601
Product: 256_1
Help please, he needs it asap
thx

Hello Yannick,
please compress contents of C:\Windows\Minidump folder and upload them to
SkyDrive (or some other service), sharing the link here.

Sat Pro A60: Blue screen error

I have had my satellite pro A60 laptop for around 6 months and recently a blue screen has started flashing up with white writing scrolling down really fast and then the laptop restarts itself. I don't have time to read what this writing says. Can any one give me any advice on what this could be and how to fix the problem ?
Many thanks in advance.

Hi
Well, the simple way is to reinstall the OS. But if you want, you can disable the automatically restart function of Windows Xp to read this error massage.
Go to System in Control Panel. Then Advanced tab. In the Startup ad Recovery section press setting button. There you need to disable the option Automatically restart.
But its very difficult to understand the blue screen error message for common users.
Bye

Blue Screen Error on Satellite A100-920 (PSAA9)

Similar Messages

Maybe you are looking for