Blue screen error question

Can I determine thecause of a bluescreen problem from the info given? Only happened twice.
Thanks in advance.
Problem signature:
Problem Event Name:    BlueScreen
OS Version:    6.1.7601.2.1.0.256.48
Locale ID:    1033
Additional information about the problem:
BCCode:    d1
BCP1:    000000000000001C
BCP2:    0000000000000002
BCP3:    0000000000000001
BCP4:    FFFFF88001AAF31E
OS Version:    6_1_7601
Service Pack:    1_0
Product:    256_1
Files that help describe the problem:
C:\Windows\Minidump\090911-18564-01.dmp
C:\Users\user\AppData\Local\Temp\WER-67642-0.sysdata.xml

Bug Check 0xD1: DRIVER_IRQL_NOT_LESS_OR_EQUAL
Which computer, Joe? Give the complete model number.
Please attach this file to your reply.
C:\Windows\Minidump\090911-18564-01.dmp
What are you doing when the blue screen occurs?
-Jerry

Similar Messages

Blue Screen Error Please Help.

Hello ... i m getting this error when ever i start my pc Multiprocessor_configuration_not_supported... this error came when my system finished booting then eventually this blue screen error occured and i needed to restart my computer .. after restarting
this error gone and my system runs fine.... i want to ask why i always get this error at the very first time when ever i start my computer... i have windows 7 professional 64bit and Intel Xeon 5160 3.0 GHZ dual processors 8 gb ddr2fb ram.....i updated my bios
also but it wasn`t effective..
please help..

Please post a copy of your dump file as a shared file to your Sky Drive with a link here.
The dump file will be created at c:\windows\minidump. You may need to change your settings in Windows to be able to see the file. To show hidden files type Folder Options in the search box above the Start button and select View,
Advanced Settings and verify that the box before "Show hidden files and folders" is checked and "Hide protected operating system files" is unchecked. You may need to scroll down to see the second item. You should also make certain that the box before "Hide
extensions for known file types" is not checked.
What is your computer make and model? If not a branded computer what is your motherboard make and model?
Please download and run Driver View and upload a copy of the report it produces to your Sky Drive. To get a report on all drivers select Edit, Select All followed by File, Save Selected Items.
http://www.nirsoft.net/utils/driverview.html
Please provide a copy of your System Information file. Type System Information in the Search Box above the start Button and press the ENTER key (alternative is Select Start, All Programs, Accessories, System Tools, System Information).
Select File, Export and give the file a name noting where it is located. Do not place the cursor within the body of the report before exporting the file. The system creates a new System Information file each time system information is accessed. You need to
allow a minute or two for the file to be fully populated before exporting a copy. Please upload to your Sky Drive, share with everyone and post a link here. Please say if the report has been obtained in safe mode. The request for a copy of this file is additional
to answering the question about make and model.
For help with Sky Drive see paragraph 9.3:
http://www.gerryscomputertips.co.uk/MicrosoftCommunity1.htm
Hope this helps, Gerry

Blue screen error and unexpected reboot - km:x64_0xf4_java.exe_image_csrss.exe,

Blue screen error and unexpected reboot - km:x64_0xf4_java.exe_image_csrss.exe,

On Wed, 4 Mar 2015 11:19:38 +0000, Perumal Ramasamy wrote:
Blue screen error and unexpected reboot - km:x64_0xf4_java.exe_image_csrss.exe,
This forum, as per the name, is only for Windows 10 Server questions.
Please repost to:
https://social.technet.microsoft.com/Forums/windowsserver/en-US/home?category=windowsserver
Paul Adare - FIM CM MVP
AAAAAA - American Association Against Acronym Abuse Anonymous.

Blue screen errors

I have read through some of the Blue Screen error discussions but they are different to mine. I am experiencing a Blue screen error, quite often, several times a week - sometimes twice in one day. Sometimes when starting up, sometimes whilst in the middle of doing something - which can be anything from writing an email to browsing the internet. I do not play games on my computer. I have tried taking the computer back to factory settings incase it was one of my photo packages but it is still happening. Can anyone help? It does say about trying the "disenable Bios memory - caching/shadowing. I was going to try this as a last resort but cannot seem to find where the option is to turn it off. Maybe someone can help with this. I have an HP Pavilion desktop and I have tried going into the advance settings before start-up where it should be listed but can't seem to find it there...
any ideas, help would be much appreciated.
Gar123

When requesting assistance, please provide the complete model name and/or product number of the HP computer in question. HP/Compaq makes thousands of models of computers. Without this information it may be difficult or impossible to assist you in resolving your issue.
The above requested information can be found on the side, back or bottom of the computer. Please do not include the serial number. Please enter the model/product information into HP's Online Consumer Support page and/or post it here for our review.
If you have any further questions, please don't hesitate to ask.
Please click the white KUDOS star to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Window setup option on the boot menu after fixing Blue Screen Errors

Hello Everyone, this is my firs t request.
I spent two days fixing the Blue Screen Errors (BSoD) on my computer but one thing keeps bothering me is that everytime I start or reboot my computer, it gives me TWO OPTIONS; 1. windows xp home edition 2.windows setup (default). I want to disable the second option. I had attempted to re-install windows but later changed my mind, and found an alternative to fix the Blue Screen Errors. I believe the reason Blue Screen Errors (BSoD) showed up was that I had created a new user profile and copied over old user profile files so improperly that it duplicated drivers, and gave me a list of STOP errors with blue screens for both new and old users.
The bootini file currently shows:
[Boot Loader]
Timeout=5
Default=C:\$WIN_NT$.~BT\BOOTSECT.DAT
[Operating Systems]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Home Edition" /noexecute=optin /fastdetect
Does anyone know what to edit for the bootini file so that I don't get two options at the startup??? My system details are:
IdeaPad, S10-4231
Windows XP Home Edition SP3
4-year old
Thanks,
Lenovo User

Hi
Welcome To Lenovo Community
As per the Default Sample of Boot.ini the default value after timeout section needs to be modified
[boot loader]
timeout=30
default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS
[operating systems]
multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Home Edition" /fastdetect
Before making any changes please save a copy of Boot.ini
Save a Backup Copy of Boot.ini
<script type="text/javascript">//
loadTOCNode(2, 'summary');
// </script>
Right-click My Computer, and then click Properties.
-or-
Click Start, click Run, type sysdm.cpl, and then click OK.
On the Advanced tab, click Settings under Startup and Recovery.
Under System Startup, click Edit. This opens the file in Notepad ready for editing.
In Notepad, click File on the Menu bar, and then click Save As.
Right click in an empty area of the Save As dialog box, point to New in the context menu, and then click Folder.
Type a name for the new folder, for example temp, and then press the ENTER key to create the folder named temp.
Double-click the new folder named temp, and then click the Save button to save a backup copy of the Boot.ini file.
Please try modifying the following
Default=C:\$WIN_NT$.~BT\BOOTSECT.DAT
to
default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS
Hope This Helps
Cheers!!!
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with Kudos!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follo @LenovoForums on Twitter!

Windows Blue Screen Error Message Appears As Soon As IPod Connected

Everytime I connect my IPod to my computer, I get the Windows Blue Screen error message. Thought it was the cable, so plugged cable in by itself. No problem. Uninstalled IPod and ITunes software and then plugged in IPod, still got the Blue Screen. The Blue Screen says something about "recent plugged in device problem". It is not the cable, it must be the IPod. Did not have this problem when I bought it. Tried it on labtop and get the same error message. I can't do updater or anything that requires me to plug the IPod into a computer because the Blue Screen appears immediately. When I unplug, the Blue Screen remains and locks up the computer so I have to restart each time. I have tried everything I can think of. Please help.

Hi Mike thank you for replying,
I am not able to start the computer in safe mode, safe mode with networking, last good known configuration etc, Each time it quickly blue screens and restarts about two secs into the process.
I was unable to try a clean OS install from the disk as it gave the blue screen error shown in the original post. The same thing happened when I tried to use the repair option on the XP home disc. So i can't get into the computer at all to start diagnosing the fault, the only clue I have is the error message, and after searching the internet I haven't found much enlightenment from that yet.
If you can help me out or suggest where to search it would be much appreciated.
Thx

Itunes blue screen error

I recently installed itunes from the disk that came with the ipod nano.
The problem I'm having is that when you open itunes with or without the ipod connected it crashed the computer. I rang apple and they said its a windows problem although they did suggest I download version 6 from their web site which I did and the problem still exists. I rang microsoft support and they said it was an apple problem
The problem doesn't happen all the time, around say 80% the computer shots down with a blue screen error message saying " A problem has been detected and windows
has been shut down to prevent damage to your computer.
PageFault_In_NonpagedArea
The technical information is:
STOP 0x00000050 (0xBB9EA29E,0x00000000,0x805-DA81,0x00000002) Then it
goes onto say beginning to dump physical memory, dumping physical memory to disk.
Can anyone help.
Regards

Hello,
I followed this recommendation for one of the other discussions to at least get the blue screens to stop for a while. So far so good. Try this to see if it helps. Make sure you sequence exactly or else blue screens will appear again. Good luck!
BE
Re: USB Device Not Regonized
Posted: Dec 26, 2005 8:11 AM in response to: Chaos Atheist Reply Email
I spent hours last night and today, when something simple actually worked!
If you've uninstalled/reinstalled recently, don't bother. The problem is probably the nano, NOT the computer.
Reset your nano. Move the hold switch until you see orange, then back again, lay it on the table and press the center of the wheel and menu at the same time and hold until you see the apple (6 to 10 seconds).
Then plug your cable into your computer's usb first, then connect the ipod to it. Wait. Hope it works for you

Blue screen error message on Satellite Pro A10

Hi,
I'm trying to help my inlaws with their Satellite Pro SPA10. I had set this up for them a few months ago and it was running really well.
Now it restarts about two seconds past the "use last good configuration" etc. screen, gets to this screen again then restarts immediately ad infinitum, never pausing on the error mesage for long enough to see what it says.
I managed to get it to boot from the windows XP home disc and got as far as the repair or continue with installation screen. When I asked the computer to do either it crashes to blue screen almost immediately. The error message is
*** STOP: 0x000000c5 (0x00000000, 0x00000002, 0x00000001, 0x8082B98B)
This is beyond my level of expertise, can anyone help?
Thanks

Hi Mike thank you for replying,
I am not able to start the computer in safe mode, safe mode with networking, last good known configuration etc, Each time it quickly blue screens and restarts about two secs into the process.
I was unable to try a clean OS install from the disk as it gave the blue screen error shown in the original post. The same thing happened when I tried to use the repair option on the XP home disc. So i can't get into the computer at all to start diagnosing the fault, the only clue I have is the error message, and after searching the internet I haven't found much enlightenment from that yet.
If you can help me out or suggest where to search it would be much appreciated.
Thx

I am trying to connect my iPad to my windows pc ( xp) but it does not recognise the iPad and I get a blue screen error causing the pc to shut down. Any ideas

I am still not able to connect my iPad 2 to my Pc ( windows xp). When I try to do so I get a blue screen error and the computer shuts down. I have reinstalled iTunes. iPod works fine. Any ideas?

Not sure, but try these.
Disable your firewall and anitvirus software temporarily.
Restart the iPad by holding down on the Sleep button until the red slider appears and then slide to shut Off. To power up hold the Sleep button until the Apple logo appears and let go of the button.
Reset the iPad by holding down on the Sleep and Home buttons at the same time (for about 10-15 seconds) until the Apple logo appears (ignore the red slider), then let go of the buttons.
 Cheers, Tom

Satellite A300D-1EI - blue screen error - display drivers had failed

I 've bought my laptop a month ago.
Everything is working great except two "blue screen" errors caused by the graphics card.
Both were when the laptop was connected with TV through S-video port.
First was when the laptop display turned off after 15 minutes while watching a movie, on resume said that display drivers had failed and then I got the blue screen. Then I updated the display drivers from ATI's website and set the laptop display not to turn off.
All were ok with no problems, until last night when I got another message that display drivers had failed followed by a blue screen.
I am wondering if this is a driver's problem or is something wrong with my graphics card.
System Info:
Processor: Intel Core 2 Duo CPU T8400 @ 2.26 GHz
Memory (RAM): 3.00 GB
System Type: 32-bit Windows Vista Home Premium
Display Adapter: ATI Mobility Radeon HD 3470

So long you use ATI driver from ATI support page there is no possibility to say anything about it.
This driver is not tested and Toshiba cannot offer any help about it.
So what you can do is to install OS again using recovery media and see what will happen in the future. Please test it intensively with clean preinstalled operating system. Don't install anything that can have some negative influence to this game or additional applications, codecs or something similar.
Test it please and let us know if the problem persists.
When you want to watch movies on TV at first switch to the TV and then start DVD player.

Lenovo N 500 Blue Screen Error

I just purchased this laptop in February and shortly thereafter I started to get the blue screen error message. It only happens after the screen tries to wake up from hibernation. I have not been able to turn hibernation off.
The system has Windows Vista Home Basic; Version 6.0; Build 6001P1
Any help would be greatly appreciated. I just don't know what to do and when I tried using the lenovo care, it said that the update service would not be available until May. This is already the middle of May.
Thank you
Message Edited by WLove on 05-17-2009 08:03 PM

you can see the error properly if you disable this option
just uncheck the option.you can get this dialog box if you go to advanced system properties
Its not an easy thing for me as well,you may get solution for your BSOD in micrsoft support. thats why i was asking for more info regarding your error
Message Edited by vijaysaradhi on 05-18-2009 11:35 AM
Message Edited by vijaysaradhi on 05-18-2009 11:36 AM
Cheers and regards,
• » νιנαｿѕαяα∂нι ѕαмανє∂αм ™ « •
●๋•کáŕádhí'ک díáŕý ツ
I am a volunteer here. I don't work for Lenovo

Getting Blue Screen error BCCode: 1a

Sometimes mi PC with windows VISTA have espontaneus Blue Screen Error.Then after startup I would get this message,can someone tell me what I shshould do?
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.0.6002.2.2.0.768.3
Locale ID: 11274
Additional information about the problem:
BCCode: 1a
BCP1: 00041790
BCP2: C08020AC
BCP3: 0000FFFF
BCP4: 00000000
OS Version: 6_0_6002
Service Pack: 2_0
Product: 768_1
Files that help describe the problem:
C:\Windows\Minidump\Mini093014-01.dmp
C:\Users\jgalante\AppData\Local\Temp\WER-61171-0.sysdata.xml
C:\Users\jgalante\AppData\Local\Temp\WER140F.tmp.version.txt
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=50163&clcid=0x0c0a

Hi,
Bug Check 0x1A: The MEMORY_MANAGEMENT bug check has a value of 0x0000001A. This indicates that a severe memory management error occurred.
You can refer to the link below for more details about this error:
http://msdn.microsoft.com/en-us/library/windows/hardware/ff557391(v=vs.85).aspx
When you encounter a BSOD (Blue Screen of Death) in Windows the computer will save information regarding the error message in a log file. This log file or minidump file is saved in the Minidump subdirectory under Windows (C:\Windows\MiniDump). Generally
the information saved in this minidump file can help pinpoint the cause of the blue screen error message and help you in resolving the problem.
Roger Lu
TechNet Community Support

BLUE SCREEN ERROR!!! - Stop: 0x00000124 (0x00000003 0x00000000 0x000000000 0x00000000)

hi,
When i restart my Windows 2008 R2 server,suddenly a blue screen appeared. In the screen the message was like,
System malfunction call your hardware vendor for support. After getting this message i gave a force restart but while booting
i got another blue screen error in which i got the below error code
Stop: 0x00000124 (0x00000003,0x00000000,0x000000000,0x00000000) and after dumping physical memory(100%) the system is keep on restarting as it happened before with blue screen.
In the server machine LCD display i am getting another error message like,
E1716 Chipset IERR. Bus 0 Dev 20. Function 2 . Review &. clear SEL.
Can anyone help me to understand the actual problem and how come i can resolve this?...

This from the Dell web site.
The system BIOS has reported a chipset internal error that resides in bus ##, device ##, function ##.
Check the SEL for more information, and then clear the SEL. Remove AC power to the system for 10 seconds, and restart the system (SEL = System Event Logs)
So I probably contact the hardware vendor.
http://msdn.microsoft.com/en-us/library/windows/hardware/ff557321(v=vs.85).aspx
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Blue screen error on resume, Sandisk U3 suspected

Hi all, I have a T61 running WinXP. I've noticed that whenever the machine goes into hibernation with my flash drive inserted it crashes with a blue screen error on resumption. The drive i a sandisk cruzer with u3. Wondering if anyone has experience with this or knows of a solution - uninstalling u3 is not ideal.
[updated 2008-11-04] I've done some quick tests to try to isolate what's causing the problem. I tried another flash drive (with u3) and the same problem occurred. However when I disable the u3 launcher the problem does not occur.
Thanks!
Message Edited by t61tt on 11-04-2008 04:41 PM

So long you use ATI driver from ATI support page there is no possibility to say anything about it.
This driver is not tested and Toshiba cannot offer any help about it.
So what you can do is to install OS again using recovery media and see what will happen in the future. Please test it intensively with clean preinstalled operating system. Don't install anything that can have some negative influence to this game or additional applications, codecs or something similar.
Test it please and let us know if the problem persists.
When you want to watch movies on TV at first switch to the TV and then start DVD player.

Satellite Pro A300 shows blue screen error 8086...

Hi,
today laptop produced a Microsoft error message (Didn't see what it was) and it said to restart laptop.
On restart blue screen error message appeared. 0x00008086
Thanks
Paul

Hi
Did you get this BSOD only once as yet?
Maybe its just a driver issue so check the device manager for any problems.
Normally BSODs are related to RAM or HDD. You can test both components using a special test tools like Memtest86 and Drive Fitness Test. You can use Google to find both freeware programs.

Blue screen error question

Similar Messages

Maybe you are looking for