Blue Screen error STOP:0x0000001E erro

Hi,
Have i have getting blue screen error (STOP:0x0000001E) on windows server R2 standard edition.
Server is working only in safe mode with networking but not normally.
Due to which server is getting rebooted again and again..please help.
suhasish

Hi,
Thanks for your posting. I agree with Paul, since it is not related to Windows Server Technical Preview, I will move it to the Windows
server general forum. Thanks for your understanding and support.
According to the error message, you may need a dump file to narrow down the root cause of the issue. You can analyze
the dump file with Debugging Tools. For more detailed information, please refer to the KB below:
How to read the small memory dump files that Windows creates for debugging
Unfortunately, it is not effective for us to debug the crash dump file here in the forum. Therefore, I would
like to suggest that you contact Microsoft Customer Service and Support (CSS) via telephone so that a dedicated Support Professional can assist with your request.
To obtain the phone numbers for specific technology request, please refer to the website listed below:
http://support.microsoft.com/default.aspx?scid=fh;EN-US;PHONENUMBERS
If you are outside the US, please refer to
http://support.microsoft.com
for regional support phone numbers.
Hope the issue will be resolved soon. In addition, I would appreciate it if can share the resolution when the
problem is resolved. Thanks for your understanding and support.
Best regards,
Susie

Similar Messages

Recovery Problem - Blue Screen error (STOP: 0x00008086)

I am working on a Toshiba Satellite laptop and need to recover back to original state. I do not have Recovery Disks, however, I have followed the Toshiba 'How to' instructions (F8 then select Repair your Computer) it show the Windows progress bar then goes to a black screen for a while then I get a Blue Screen error (STOP: 0x00008086).
Is there any way to get around this?

Hi
If the HDD recovery does not work then you need the recovery disk.
Here you can order this.
https://backupmedia.toshiba.eu/landing.aspx
Greets

Satellte L40 - After XP Setup blue screen Error

Hi,
I browsed this forum and the net and I did not find an answer, so:
I'm downgrading from Vista to Win XP on Satellte L40 (PSL48E), I created new WinXP SP2 with nLite with the AHCI drivers,
looked ok win xp setup recognized the HDD so i deleted the vista partition I created new NTFS partition Setup copied the files
and when it restarted for the first time:
I got blue screen error STOP 0x0000007E which suggest it may be BIOS incompatibilty, a post in this forum had resolved by using XP SP2, but I'm already using Install CD with XP SP2.
Now, BIOS for the model PSL48E comes only for windows flashing. and I have no Windows on my system.
Even if I reinstall vista again and flash it with XP compatible bios I'm afraid I might loose vista compatibiliy (if XP dosn't work after all)
and it will render my system useless.
Help please.

Here you will find a manual on how to install XP on an L40
Regards
JBJ

BLUE SCREEN ERROR!!! - Stop: 0x00000124 (0x00000003 0x00000000 0x000000000 0x00000000)

hi,
When i restart my Windows 2008 R2 server,suddenly a blue screen appeared. In the screen the message was like,
System malfunction call your hardware vendor for support. After getting this message i gave a force restart but while booting
i got another blue screen error in which i got the below error code
Stop: 0x00000124 (0x00000003,0x00000000,0x000000000,0x00000000) and after dumping physical memory(100%) the system is keep on restarting as it happened before with blue screen.
In the server machine LCD display i am getting another error message like,
E1716 Chipset IERR. Bus 0 Dev 20. Function 2 . Review &. clear SEL.
Can anyone help me to understand the actual problem and how come i can resolve this?...

This from the Dell web site.
The system BIOS has reported a chipset internal error that resides in bus ##, device ##, function ##.
Check the SEL for more information, and then clear the SEL. Remove AC power to the system for 10 seconds, and restart the system (SEL = System Event Logs)
So I probably contact the hardware vendor.
http://msdn.microsoft.com/en-us/library/windows/hardware/ff557321(v=vs.85).aspx
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Itunes blue screen error

I recently installed itunes from the disk that came with the ipod nano.
The problem I'm having is that when you open itunes with or without the ipod connected it crashed the computer. I rang apple and they said its a windows problem although they did suggest I download version 6 from their web site which I did and the problem still exists. I rang microsoft support and they said it was an apple problem
The problem doesn't happen all the time, around say 80% the computer shots down with a blue screen error message saying " A problem has been detected and windows
has been shut down to prevent damage to your computer.
PageFault_In_NonpagedArea
The technical information is:
STOP 0x00000050 (0xBB9EA29E,0x00000000,0x805-DA81,0x00000002) Then it
goes onto say beginning to dump physical memory, dumping physical memory to disk.
Can anyone help.
Regards

Hello,
I followed this recommendation for one of the other discussions to at least get the blue screens to stop for a while. So far so good. Try this to see if it helps. Make sure you sequence exactly or else blue screens will appear again. Good luck!
BE
Re: USB Device Not Regonized
Posted: Dec 26, 2005 8:11 AM in response to: Chaos Atheist Reply Email
I spent hours last night and today, when something simple actually worked!
If you've uninstalled/reinstalled recently, don't bother. The problem is probably the nano, NOT the computer.
Reset your nano. Move the hold switch until you see orange, then back again, lay it on the table and press the center of the wheel and menu at the same time and hold until you see the apple (6 to 10 seconds).
Then plug your cable into your computer's usb first, then connect the ipod to it. Wait. Hope it works for you

Blue screen error message on Satellite Pro A10

Hi,
I'm trying to help my inlaws with their Satellite Pro SPA10. I had set this up for them a few months ago and it was running really well.
Now it restarts about two seconds past the "use last good configuration" etc. screen, gets to this screen again then restarts immediately ad infinitum, never pausing on the error mesage for long enough to see what it says.
I managed to get it to boot from the windows XP home disc and got as far as the repair or continue with installation screen. When I asked the computer to do either it crashes to blue screen almost immediately. The error message is
*** STOP: 0x000000c5 (0x00000000, 0x00000002, 0x00000001, 0x8082B98B)
This is beyond my level of expertise, can anyone help?
Thanks

Hi Mike thank you for replying,
I am not able to start the computer in safe mode, safe mode with networking, last good known configuration etc, Each time it quickly blue screens and restarts about two secs into the process.
I was unable to try a clean OS install from the disk as it gave the blue screen error shown in the original post. The same thing happened when I tried to use the repair option on the XP home disc. So i can't get into the computer at all to start diagnosing the fault, the only clue I have is the error message, and after searching the internet I haven't found much enlightenment from that yet.
If you can help me out or suggest where to search it would be much appreciated.
Thx

Blue Screen Error on Satellite A100-920 (PSAA9)

Hi
I had a blue screen error during normal use and after restart, Windows suggested updating the BIOS, so I updated it with the latest version (5.10). The next day, I got another blue screen and on restart, Windows suggested I update my display drivers, which I did (to ver. 8.241)... I have an ATI Radeon X1400 GPU. After doing that, the computer crashed every time it loaded windows, with a popup about services.exe telling me the computer would turn off in 60 seconds.
I assumed this was related to the display driver, so I replaced the drivers with an earlier-dated version (8.241-034065C). After I did this, it seemed to work and I could use the computer fine for a bit, even play games such as GTA but i am starting to get the blue screens again, usually just when opening folders, etc and not when running graphics-heavy applications. The problem definitely goes away when I disable my display drivers, but that's not much of a solution.
I turned off the reboot on error setting and this is the information from the blue screen of death:
*** STOP: 0x0000008E (0xC0000005,0xEE6DF5E9,0xBAD2F99C,0x00000000)
*** system32:huy32.sys - Address EE6DF5E9 base at EE6DD000, Datestamp 45abe717
Does anyone have any idea how I can sort this problem, it's driving me crazy!
I have downloaded the Omega drivers for the card, but am slow to install them as I hear they can cause overheating and I think ATI/Toshiba should be able to provide me with a solution without me having to use third party drivers.

I have Network Associates (McAfee) v. Enterprise 8. I ran a full virus scan with this and windows defender and a worm stinger utility and another microsoft app whose name I forget... all came up clean.
I tried the omega drivers out of frustration and they cause services.exe to terminate.
Could it possibly be a BIOS issue? I'm not sure how likely it is, since the computer definitely works with the display adapter enabled and will usually crash (BSOD) after anything from a few mins to a few hours with it enabled. I seem to be getting two types of reply from microsoft on restart, one saying there is a general driver fault and one saying there is a display driver fault and suggesting updating the display drivers.

Blue screen error while trying to install windows server 2003 in Lenovo G500s essentials Notebook

Hi,
I bought a new lenovo G500s essentials note book. It's a freedos system. I am trying to install windows server 2003 in it. But I am getting blue screen error . error message like ths,
Technical Information:
STOP: 0*0000007B (0*FFFFFADF2CE323C0, 0*FFFFFFFFC0000034, 0*0000000000000000, 0*0000000000000000)
Can someone please help.
Regards,
Priya.
Solved!
Go to Solution.

I don't have a similar machine to look at so this is a bit of a guess:
Per page 30 or your user's guide http://download.lenovo.com/consumer/mobiles_pub/lenovo_g400sg400stouchg500sg500stouchg405sg505s_ug_e...:
How can I start the BIOS setup utility?
To start the BIOS setup utility:
1 Shut down the computer.
2 Press the Novo button and then select BIOS Setup
There should be a tab labelled something like "Configuration" and on that page something like "SATA controller mode". Select "compatible" and save and exit.
I'm not certain this will fix your problem, but it's worth a try.
Z.
The large print: please read the Community Participation Rules before posting. Include as much information as possible: model, machine type, operating system, and a descriptive subject line. Do not include personal information: serial number, telephone number, email address, etc. The fine print: I do not work for, nor do I speak for Lenovo. Unsolicited private messages will be ignored. ... GeezBlog
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество

Blue Screen Error while login screen in My Compaq CQ40 133TU

Mate ,
I cant login my system. when i swtich on my sytem till login screen it ll coming , but after that showing blue screen error wth this error code
*** stop : 0x0000008E (0xc0000005, 0x0044005C, 0x92000908, 0x00000000)
What to do ? Please give a solution
Product : Compaq Presario CQ40
S/n :[Personal Information Removed]
P/N : FW554PA#ACJ
os : wINDOWS 7

Hi
Please find the link given below might help you to resolve your issue.
http://support.microsoft.com/kb/315335
http://support.microsoft.com/kb/827663
Let us know how it goes!
"I work for HP."
****Click the (purple thumbs up icon in the lower right corner of a post) to say thanks****
****Please mark Accept As Solution if it solves your problem****
Regards
Manjunath

Blue Screen Error on PC

My C5180 All-in-one has, all of a sudden, stopped working. When trying to print, I get a blue screen-error and the pc reboots.
The following is the error description provided by windows after the reboot:
Name of Error: BlueScreen
OS-version: 6.1.7600.2.0.0.768.3
Country-id: 1030
Additional info on error:
BCCode: 1
BCP1: 0000000077A2FF2A
BCP2: 0000000000000000
BCP3: 000000000000FFFF
BCP4: FFFFF8800545FCA0
OS Version: 6_1_7600
Service Pack: 0_0
Product: 768_1
Files describing error:
C:\Windows\Minidump\050110-31859-01.dmp
C:\Users\CURRENTUSER\AppData\Loca\Temp\WER-55796-0.sysdata.xml
Sincerely
Nielsen

With the blue screen it can be a few things that are interifering with it. First thing unplug anything from the usb ports on your computer and if you have like a logtech webcam make sure it is unplugged and also that if it is built in disable the driver. If you are on a pc you may want to go into device manager and update your usb drivers on your computer.
use these articles
http://support.apple.com/kb/TS2280
http://support.apple.com/kb/TS1502

Blue Screen error !!! 0x00000101

Hi
sorry if my english is`t that good....
I recetnly have a problem with my windows...
this blue screen error often appeare when I playing games...
Os: win 7 32B
Ram : 4g
Cpu : core i3 2100
and this is my minidump error that windows saved : http://0up.ir/up7/9-010210-15958-01.rar
for more information i can tell u that i reistall my windows and defrag hard and error cheack my HDD

STOP 0x101: CLOCK_WATCHDOG_TIMEOUT Troubleshooting
Here's a good thread on http://www.sysnative.com/forums/showthread.php/1248-0x101-quote-A-clock-interrupt-was-not-received-on-a-secondary-processor-quote
What you're looking for will be in one of the following categories:
a) BIOS bug
b) a driver whose activity is causing the target processor to lock up
c) a hardware defect (temperature, voltage, dust, RFI, outright borkedness...) ?I wonder about CPU defect also)
So, check the drivers http://www.carrona.org/dvrref.php
Then check the inside of the case (temperature, voltage, dust, etc).
Then run hardware stress tests
Try this free video stress test: http://www.ozone3d.net/benchmarks/fur/
    FurMark Setup:
    - If you have more than one GPU, select Multi-GPU during setup
    - In the Run mode box, select "Stability Test" and "Log GPU Temperature"
    Click "Go" to start the test
    - Run the test until the GPU temperature maxes out - or until you start having problems (whichever comes first).
    - Click "Quit" to exit
Try this free stress test: Free Software - http://download.cnet.com/Prime95-32-bit/3000-2053_4-192895.html
    Prime95 Setup:
    - extract the contents of the zip file to a location of your choice
    - double click on the executable file
    - select "Just stress testing"
    - select the "Blend" test. If you've already run MemTest overnight you may want to run the "Small FFTs" test instead.
    - "Number of torture test threads to run" should equal the number of CPU's times 2 (if you're using hyperthreading).
    The easiest way to figure this out is to go to Task Manager...Performance tab - and see the number of boxes under CPU Usage History
    Then run the test for 6 to 24 hours - or until you get errors (whichever comes first).
    The Test selection box and the stress.txt file describes what components that the program stresses.
More Video Stress Tests:
    1. Thanks to Vir Gnarus (http://www.sysnative.com/forums/members/vir-gnarus.html) for finding this video memory test: https://simtk.org/home/memtest
Alternate download link (w/o registration) located here: http://folding.stanford.edu/English/DownloadUtils
    2. Two other video stress tests (may be more stressful than FurMark):
NOTE: I have had reports that some ISP's will block this website
Video Memory stress Test - http://nvworld.ru/utilities/vmt/
Artifact Locator - http://nvworld.ru/utilities/alocator/
Sorry, but I don't read the language that this website is made in.
    3. Another interesting test that came to my attention: http://www.ocbase.com/perestroika_en/index.php?Download
    USE AT YOUR OWN RISK - the program doesn't have a whole bunch of safety features to protect you from yourself!
    Quote:
    CPU Stress Tests:
    Only need to run 1 or 2 of the tests under most circumstances. I haven't used any of the tests myself, so I listed all that I was able to find.
    - http://downloadcenter.intel.com/Deta...19182&lang=eng
    - http://7byte.com/index.php?page=hotcpu
    - http://www.7byte.com/index.php?page=burnin64
    - http://www.overclock.net/general-pro...ress-test.html
    - http://www.fossiltoys.com/cpuload.html
    - http://www.pcworld.com/downloads/fil...scription.html
    - http://www.overclock.net/general-pro...ress-test.html
    - http://majorgeeks.com/CPU_Stability_Test_d215.html
    - http://www.xtremesystems.org/forums/...d.php?t=201670
    - the test(s) suggested at this link are bootable: http://www.techsupportforum.com/foru...ml#post2232929
Then try replacing parts.
Then look up the versions of your BIOS to see what changes were done.
Recently it was found (here: BSOD Stop 0x00000101 and Stop 0x0000009c ) that a wipe and reinstall of Windows fixed a STOP 0x101 problem. I'd have to recommend at least running SFC.EXE /SCANNOW on any PC that has this problem (simply because it's too easy easy
to do and it may fix things).
Wanikiya and Dyami--Team Zigzag

Blue Screen Error on Windows 7 - Event ID 41

Hi,
I have encountered a recurring problem with my Windows 7 for the last 2 weeks. The blue screen error keeps popping up every other day
or so. The problem seems to come from Kernel-Power, which is according to the report. Here are my laptop specs and the complete report:
System:
Manufacturer: Lenovo
Model: Lenovo Win7 PC
Rating: 5.8 Windows Experience Index
Processor: Intel(R) Core(TM) i7 CPU, Q720 @ 1.60GHz, 1.60
Installed memory (RAM): 4.00 GB
System type: 64-bit Operating System
Pen and Touch: No Pen or Touch Input is available for this Display
Error Report:
The system has rebooted without cleanly shutting down first. This error could be caused if the system stopped responding, crashed, or lost power unexpectedly.
System
Provider
[ Name]
Microsoft-Windows-Kernel-Power
[ Guid]
{331C3B3A-2005-44C2-AC5E-77220C37D6B4}
EventID
41
Version
2
Level
1
Task
63
Opcode
0
Keywords
0x8000000000000002
TimeCreated
[ SystemTime]
2010-04-21T23:12:58.398026200Z
EventRecordID
15460
Correlation
Execution
[ ProcessID]
4
[ ThreadID]
8
Channel
System
Computer
Wall0615
Security
[ UserID]
S-1-5-18
EventData
BugcheckCode
10
BugcheckParameter1
0x0
BugcheckParameter2
0x2
BugcheckParameter3
0x0
BugcheckParameter4
0xfffff80003420477
SleepInProgress
false
PowerButtonTimestamp
0
Any help or advice would be greatly appreciated. Thank you!

You got bugcheck 0xa - "IRQL_NOT_LESS_OR_EQUAL". A kernel mode component tried to read from address 0 at an inappropriate time.
Can you upload the contents of c:\windows\minidump to your SkyDrive and
provide a link?
For dealing with Blue Screens, general guidance follows:
Consider running chkdsk on all partitions. Let chkdsk complete on each partition and see if that helps.
Also consider running SFC /SCANNOW.
If you boot into safe mode, do you still experience bugchecks? What about if you do a clean
boot, or device
clean boot?
For memory corruption cases such as you seem to be experiencing, it can be helpful to use Driver Verifier. To enable Driver Verifier... start->verifier.exe->OK->Create standard settings- >Next->select driver names from a list->Next->sort
by Provider->select all non-Microsoft drivers->Finish, and OK your way out of the dialog.
Then, reboot and use the system as you normally would, and wait for a problem. In the event that the system does not boot completely after enabling driver verifier, boot into Safe Mode and run driver verifier, and tell it to delete the
changes.
Wait for a bugcheck to occur after enabling verifier as described, and then upload it to your SkyDrive,
and provide a link.
Consider testing memory with Windows Memory Diagnostic or memtest86. Note that memory that passes tests is not necessarily good memory - it just hasn't failed a test. Consider systematically eliminating RAM from the system - run with
a couple of modules for a while, and see how things go. Then try the other modules.
Other common suggestions include ensuring drivers are up to date (including video drivers), as well as ensuring that you're using the latest BIOS.

Blue screen error 1033

I am getting Blue Screen error 1033. Following is link of .dmp file
https://skydrive.live.com/redir?resid=D0DC1B82B20BAC80%21121

Hi,
The Bug_Check D1 CAUSE netio.sys which is a Windows component which means something else drove it into Fault. Most likely are the combination of third party security programs and the network drivers.
Generally, you may update BIOS and other hardware drivers first.
Do you have any third party security programs installed?
If so, please temporarily disable all the third party security programs and test the issue.
Meanwhile, you may reinstall or update the drivers for the network related device.
In addition, I would like to suggest you refer to the links below to check the issue:
Bug Check Code 0xD1:
http://msdn.microsoft.com/en-us/library/windows/hardware/ff560244%28v=vs.85%29.aspx
Stop error when you resume a computer that is running Windows 7 or Windows Server 2008 R2 from sleep or from hibernation: "STOP: 0x000000D1"
http://support.microsoft.com/kb/978982
Hopefully you could resolve your issue soon.
Regards,
Blair Deng
Blair Deng
TechNet Community Support

Blue screen error 0x0000006B windows 7 64bit

I have blue screen error code 0x0000006B PROCESS1_INITIALIZATION_FAILED on my vaio laptop. I tried safe mode and safe mode with command prompt and still doesnt work either. Someone help fix this issue please

Hi,
Which phase did you come across this error?
Read this article to see if it's helpful to you:
"Stop error code 0x0000006B PROCESS1_INITIALIZATION_FAILED" error message during startup on a computer that is running Windows 7 or Windows Server 2008 R2
http://support.microsoft.com/kb/981833
If the issue persists, like ZigZag said, after upload the minidump file into OneDrive, then share the link here.
To share the file, prefer to this article:
Share files and folders and change permissions
http://windows.microsoft.com/en-in/onedrive/share-file-folder
Karen Hu
TechNet Community Support

HT1369 when syncing ipod, receiving blue screen error WDF_Violation

When syncing ipod, receiving blue screen error WDF_Violation

I am having a similar problem. I have an iPod Classic 80Gb with a brand new computer using iTunes11 on Windows 8.
iTunes sees the iPod on the Sidebar, but when I try to sync or change any settings, roughly half the time it will crash my windows and cite a WDF Violation error. There doesn't seem to be any rhyme or reason to it. Regardless, even if it doesn't crash, it won't sync. It gets as far as "Starting Sync" and then it just stops.
I have verified that the iPod still syncs fine on my old xp machine, and I have tried the following, all to no avail.
Enabling Disk use
Converting higher bit rate songs to 128 kbps AAC
Deleting and reinstalling the iPod's drivers through device manger
Running iTunes in XP SP3 compatibility mode
Running iTunes as Administrator
At one point, with disk use enabled and 128 kbps bit rate selected, I managed to get it to prompt me to Erase and Sync. it went on to erase everything on the iPod, but would not load any of my media back up. Subsequent attempts to sync gave the same result.
I had a look at the link above, but it's a brand new computer and I installed and updated everything myself to the latest version, except my Wacom tablet, which was acting funny with the latest driver, but it can't be that because the original driver from the install CD I reverted too has workd fine in conjunction with iTunes and this same iPod for years on my other machine.
I am getting extremly frustrated with this. Someone please help make it better !?!

Blue Screen error STOP:0x0000001E erro

Similar Messages

Maybe you are looking for