Blue Screen error using Boot Camp when installing XP on the MacBook Pro

I have been trying to install Windows XP Professional (with SP2) on my MacBook and I keep encountering blue screen errors during the install. I successfully create the Windows partition with Boot Camp (v2.0) and then Windows install begins. However, during the setup process it hangs and then eventually throws an error showing a blue screen. There has been a different error each time I've tried to install. I've booted in OSX and then deleted the Windows partition through Boot Camp and then attempted the process from the beginning five separate times and each time I get an error during the initial install phase.
Its not a matter of the installation CD because i borrowed 3 differnt copies from some friends and i still have the same issues.
Once, I managed to actually start windows XP however it was full of errors probably as parts of it weren't properly installed due to the the blue screens that made me reboot several times.
Am I the only one having this problem??
Is this a matter of the hardware? Can you think of any possible solution?
(I used NTFS did everything propperly I'm 100% sure)(I tried FAT as well)(still nothing)
PLEASE HELP

Can you read and write from your optical drive? I would have it checked by burning something to it and seeing if it can be read.
I have noted a link, with some information that may be helpful, for you to check out.
http://discussions.apple.com/message.jspa?messageID=7872477#7872477
I would repair permissions before your next attempt too.
If this fails, I would contact Apple.

Similar Messages

HT5639 Can I use Boot Camp to install Linux on my MacBook Pro?

Can I use Boot Camp to install Linux on my MacBook Pro?

Welcome to the Apple Support Communities
Boot Camp wasn't designed to install Linux. Apart from that, the Boot Camp version included in OS X Mountain Lion will ask you to insert a Windows 7 or Windows 8 DVD in order to run Boot Camp, as far as I know.
Apple doesn't support Linux on Macs, but it works properly on Macs. There are a lot of how-to's in the Internet about the steps to install Linux and the different possibilities you have. Also, what distribution do you want to install on the computer? You should also consider the option to install Linux on a virtual machine

HT5639 if i use boot camp to establish windows on my Macbook pro can i then install a windows program and run it without another software ie parallels?

Can I use a windows program such as QuickBooks on my macbook pro 15inch with only using boot camp or do i need to have another program?

Boot Camp is everything you need to run a Windows application.
Boot Camp allows you to install Windows in a second volume, so you can start up there and run all your Windows apps without needing any Mac OS X app. It's true that OS X apps like Parallels or VMware Fusion allow you to use your Boot Camp partition in Mac OS X, but it looks like you don't want that

Friends, MacBook Pro 8,1 – Intel Core i5 – 2.23 GHz (early 2011) New MB Pro with OSX 10.6 – current on all updates. I successfully installed rEFit. I used Boot Camp to install Win 7. All was great. Then installed debian 6. Somehow after the debian i

MacBook Pro 8,1 – Intel Core i5 – 2.23 GHz (early 2011) New with OSX 10.6 – current on all updates.
I successfully installed rEFit. I used Boot Camp to install Win 7. All was great.
Then installed debian 6. Somehow after the debian install and restart (I know this sounds crazy) but I am now reduced to Win 7 only. rEFit is not present when rebooting nor is OSX or debian. Further, I am unable to force the install DVD to launch when rebooting, by holding C, D or F8. The Option key brings me to the grey screen with a padlock. I have attempted the root and local pw- no go. Restart holding D takes me to the windows boot manager. I have attempted several options within the Advanced Options; including – Repair Your computer, safe mode and “last known good config,” All of which did nothing.
I can see all my OSX files within win7. I tried to install the OSX within windows. Ya right, that did nothing..
I only desire to get back to OSX...
What are my options??

Yes, you royally hosed up your machine.
You should first try to get your files off, any way you can to a external drive.
Your going to need to hold c and boot from the disk that came with your computer and a couple of screens in under the menu is a option for Disk Utility.
Select your drive and Erase with Security Option Zero, format the drive HFS+ Journaled and when that's finished (about a hour or so) then quit and install OS X from the installer.
I hope this works, but I suspect it won't. Others have hosed their machines trying to use a Linux disk without proper partition formatting too.
Another option might be to use another Mac to c boot off the Snow Leopard disk and install OS X onto a external drive, take that to the problem Mac and try holding option and booting off of it to erase your internal drive.
You could replace the drive.
frederick s wrote:
The Option key brings me to the grey screen with a padlock.
Is this holding option while booting?
There was someone else around here who hosed their Mac with a Linux disk too. Try to find it.

Using Boot Camp to install Windows XP: problems with display going blank

I have a new Mac mini (early 2009) connected to an older NEC MultiSync LCD (VGA only) display through a KVM.
I initially used the Apple Mini DisplayPort to VGA adapter to make the display connection.
All worked fine with Mac OS X, but when I attempted to use Boot Camp to install Windows XP (Home), the display would go blank with the display saying "no signal" at some point during the install and I couldn't get the mini's display back without power cycling the mini. Numerous attempts at removing the Boot Camp partition, re-partitioning, and retrying resulted in nothing but frustration. I typically had to force the mini to boot from the OS X install DVD or Mac partition to make the mini usable again.
I have used my LCD display and KVM combination with a variety of computers running a variety of operating systems, including older Mac minis running both Mac OS X and XP, with no problems. And I intend to keep using it, so I wasn't going to assume the problem was there!
After noting that Apple had already released a [firmware update|http://support.apple.com/downloads/Mini_DisplayPort_to_VGA_FirmwareUpdate] for this adapter to address "[possible intermittent flickering and compatibility issues|http://support.apple.com/kb/HT3492]", I double checked that it was up to date--and it was. But, it made me suspicious that this adapter might have some more problems and be the source of the troubles I was experiencing.
So, I got an Apple Mini-DVI to VGA adapter and tried that.
No more display problems! Everything works fine with Mac OS X. Windows XP installed without so much as a flicker, and it works smoothly with my setup.
I'm curious if I'm the only one who was affected by this problem?

Restart your Mac while holding down the Alt/Option-key until you get to the Boot Selection Screen.
Choose to boot OSX.
Use the BootCamp Assistant to remove the Windows partition.
Go to System Preferences then Startup Volume and rest the default to be your OSX volume.
Reboot your Mac again.
Follow the instructions from here http://support.apple.com/kb/TS3173 and use the BootCamp Assistant again to install Windows 7
Stefan

HT4818 hey, I want to install windows on my mac, I have mac osx lion and I'm soon going to get mountain lion. If I use Boot camp to install windows do I need a windows disc, will i lose all my data, etc. If so how to I save them. Can I switch back to osx

hey, I want to install windows on my mac, I have mac osx lion and I'm soon going to get mountain lion. If I use Boot camp to install windows do I need a windows disc, will i lose all my data, etc. If so how to I save them. Can I switch back to osx after I install windows. ( can I switch between Windows and OS X as many times as I want.) thanks for answering.
Sebastian

hey, I want to install windows on my mac, I have mac osx lion and I'm soon going to get mountain lion. If I use Boot camp to install windows do I need a windows disc, will i lose all my data, etc. If so how to I save them. Can I switch back to osx after I install windows. ( can I switch between Windows and OS X as many times as I want.) thanks for answering.
Sebastian

I Mini with an i7 processor. I would like to use Boot Camp to install windows based CAD software on my MAC. Would it be better to use a plugin external hard drive to load my software on and if so what hard drive would you recommend?

I Mini with an i7 processor. I would like to use Boot Camp to install windows based CAD software on my MAC. Would it be better to use a plugin external hard drive to load my software on and if so what hard drive would you recommend?

Thank you for your quick response. I can then use a ZIP drive for data storage. I want to keep as much of my hard drive free of data as possible.

HT5639 i use boot camp to install windows 8.1 but in the middle of the installation it is stop,how can i install the windows again?

i use boot camp to install windows 8.1on my mac but in the middle of the installation it is stop,how can i install the windows again?
why it`s stop?

What is your exact machine and what's the error

Is it possible to use Boot Camp to install Windows on an external HD?

So I don't use up space on my internal hard drive, would it be possible to use Boot Camp to install Windows to an external hard drive?

Ok, so officially, you have to install it on your Mac's internal drive. Good, thanks for clearing that up.
I guess the only simple alternative to installing Windows on your Mac's internal drive is to buy another Mac, and install it on there instead I mean, you could have a Mac Mini or a MacBook, and have that running Windows under Boot Camp.

Used Boot Camp to install Ubuntu, now Boot Camp is out of date, want to rid

A while ago I used Boot Camp to install Ubuntu, but now Boot Camp won't start because I don't have 10.5. How do I delete and restore my Ubuntu portion back to OS X

in system settings, go to the time/date, and uncheck the "Automatically set time" option, and manually set the date to sometime in September 2007. You should be able to use the Beta version of Boot Camp to remove your second partition and restore your disk.

I CANNOT USE BOOT CAMP ASSISTANT 4.1 ON MAC BOOK PRO 15 INCH

i installed windows xp using boot camp Boot Camp Assistant 4.0.1 version, which was on system along with macbook pro 15", quad core processor,
windows were also installed with the partitions, but after windows were installed, drivers were missing and wen i went back through options to open boot camp on mac os it boot camp was nt working, i deleted the partion where i installed windows xp, and then too boot camp options to make partion is nt showing, kindly guide to repair BOOT CAMP ASSISTANT, and also how can i upgrage my Os frm lion 10.7.3 to mountain loin.

Reinstall OSX using the online recovery.
Then use Boot Camp Assistant. One of the Boot Camp Assistant menu items is download the Windows Support Software (drivers). Make sure you follow the Boot Camp instructions.
Or, Reinstall OSX using the online recovery.
Then install a virtual machine like Parallels, Fusion, or VirtualBox. Then install Windows in the virtual machine.
You can use either Boot Camp or a virtual machine to install Windows. Neither method requires any driver cds.

If i create a partition for Windows 7, and boot up in Windows using Boot Camp, can I still access the files from the Mac partition (Photo's Music etc.)

If i create a partition for Windows 7, and boot up in Windows using Boot Camp, can I still access the files from the Mac partition (Photo's Music etc.)

JDFitch wrote:
Ok Great,
Will installing Boot Camp drivers allow me to both read and write to the OS X Volume from windows?
This is important as if it will it means i can make the windows partition a lot smaller and keep all my files on the OS X partition which would be preferable.
Jon
No, OSX will be read only (from Windows) and vice versa. (you can install 3rd party utilities on either or both partitions, to make read/write possible)

Can I Use Boot Camp to Install Windows XP on Late2012 MacMini

I can't remember everything I've read here in the Community, I still have my Windows XP laptop, haven't used it except to transport videos. Can I use Boot Camp to partition & install the XP on my Dec 2012 Mac Mini? Running Mountain Lion 10.8.5. I still have my Seagate ext HD 1.5 TB, connected to the Mini, but haven't reset it to Mac only. I'm having a slight prob with memory loss, mine, not the Mac's. I think I read that I can't do this with Mountain Lion, but when I try to find what I think I read, it's so far back, I can't get to it. Please help? Thanks in advance.

The Late 2012 Mac mini only supports 64-bit Windows 7 and 8 versions, so you can't install Windows XP with Boot Camp.
If you need Windows XP, download an application like Parallels, VMware Fusion or VirtualBox, create a virtual machine and install Windows XP there. You shouldn't have any RAM problem with Windows XP.
OS X can copy to FAT and exFAT drives, so you can format your external drive in "MS-DOS (FAT)". First, open Finder, choose your external drive in the sidebar and copy all the files to the desktop. Then, use Disk Utility to format your external disk in "MS-DOS (FAT)" > http://pondini.org/OSX/DU1.html Finally, copy all the files back

BSOD when installing Windows 7 on MacBook Pro Retina

I tried everything I could but I'm unable to install Windows 7 on my MBP Retina using Boot Camp because of recurring blue screens always happening at exactly the same time.
After creating a new partition with Boot Camp and restarting to the point where the MBP is supposed to boot from the Windows 7 installation CD or USB flash drive (tried both), the black and white "Windows is loading files" passes without problems but I ALWAYS get a BSOD a few seconds after the Windows splash screen appears.
Here are some examples of the errors I get:
I tried reformatting and reinstalling Lion on my SSD several times, I even ran extensive memtest batteries but the RAM appears to be OK. I really don't know what to do anymore.
I read that Windows has issues with the HFS file system which can cause BSODs but since the error appears before I can even install Windows I cannot modify anything in the Windows installation. Then again it could be a ton of other things...

Could be you khave a corrupted Win 7 install file/files.
Try downloading the Win 7 ISO for the version you have from here.
http://www.mydigitallife.info/download-windows-7-iso-official-32-bit-and-64-bit- direct-download-links/
Then burn that ISO to a USB or DVD, USB would be better.

Anyone know how to use a 'home' and 'end' key on the Macbook pro keyboard?

I had a pc before, and the keyboard had home and end keys on the keyboard for quickly moving cursor to end or beginning of word or sentence. I can't figure out if there is something like that on the Macbook pro. It would be really helpful. So does anyone know if there is those keys and if so what do i use?
I'd appreciate any help.
Thanks

see if any of this works for you
On a smaller keyboard, such as the wireless, or on portables, you can use fn- left arrow for home and fn- right arrow for end.
On a Mac, 'home and 'end' take you to the beginning and the end of document, respectively. Getting to the beginning or end of a line is done with cmd- leftarrow and cmd- rightarrow. Emacs shortcuts, such a ctrl-a and ctrl- e also work in most places, where the app is done right.

Blue Screen error using Boot Camp when installing XP on the MacBook Pro

Similar Messages

Maybe you are looking for