Blue screen of death error

Hello I have just
I just installed a new gpu (r7 265) and after installing its drviers i went to make a skype call and i got the blue screen
of death.This is the first time it happened to me.can anyone try and help me make sure it is not my new gpu.
fyi: I used to have integrated graphics amd-10 7850k and i currently have it installed still may those two conflicting with
each other be causing the problem
I have windows 7 64 bit
link to pic of errors http://gyazo.com/c0644eae99f575915b86c46ae9f5d8f6

Hi,
In order to assist you, we will need the .DMP files to analyze what exactly occurred at the time of the crash, etc.
If you don't know where .DMP files are located, here's how to get to them:
1. Navigate to the %systemroot%\Minidump folder.
2. Copy any and all DMP files in the Minidump folder to your Desktop and then zip up these files.
3. Upload the zip containing the .DMP files to Onedrive or a hosting site of your choice and paste in your reply. Preferred sites: Onedrive, Mediafire, Dropbox, etc. Nothing with wait-timers, download managers, etc.
4 (optional): The type of .DMP files located in the Minidump folder are known as Small Memory Dumps. In %systemroot% there will be what is known as a Kernel-Dump (if your system is set to generate). It is labeled MEMORY.DMP. The difference
between Small Memory Dumps and Kernel-Dumps in the simplest definition is a Kernel-Dump contains
much more information at the time of the crash, therefore allowing further debugging of your issue. If your upload speed permits it, and you aren't going against any strict bandwidth and/or usage caps, etc, the Kernel-Dump is the best
choice. Do note that Kernel-Dumps are much larger in size due to containing much more info, which is why I mentioned upload speed, etc.
If you are going to use Onedrive but don't know how to upload to it, please visit the following:
Upload photos and files to Onedrive.
After doing that, to learn how to share the link to the file if you are unaware, please visit the following link -
Share files and folders and change permissions and view 'Get a link'.
Please note that any "cleaner" programs such as TuneUpUtilities, CCleaner, etc, by default will delete .DMP files upon use. With this said, if you've run such software, you will need to allow the system to crash once again to generate a crash dump.
If your computer is not generating .DMP files, please do the following:
1. Start > type %systemroot% which should show the Windows folder, click on it. Once inside that folder, ensure there is a Minidump folder created. If not, CTRL-SHIFT-N to make a New Folder and name it Minidump.
2. Windows key + Pause key. This should bring up System. Click Advanced System Settings on the left > Advanced > Performance > Settings > Advanced > Ensure there's a check-mark for 'Automatically manage paging file size for all
drives'.
3. Windows key + Pause key. This should bring up System. Click Advanced System Settings on the left > Advanced > Startup and Recovery > Settings > System Failure > ensure there is a check mark next to 'Write an event to the system
log'.
Ensure Small Memory Dump is selected and ensure the path is %systemroot%\Minidump.
4. Double check that the WERS is ENABLED:
Start > Search > type services.msc > Under the name tab, find Windows Error Reporting Service > If the status of the service is not Started then right click it and select Start. Also ensure that under Startup Type it is set to Automatic rather than
Manual. You can do this by right clicking it, selecting properties, and under General selecting startup type to 'Automatic', and then click Apply.
If you cannot get into normal mode to do any of this, please do this via Safe Mode.
Regards,
Patrick
“Be kind whenever possible. It is always possible.” - Dalai Lama

Similar Messages

Blue screen of death - Error message included

I have searched on the forum and found nothing exactly like my situation. I am running Labview 7.1 in a test bay through the NI chassis with an embedded controller. The system basically reads up to 100 RTD, and 224 pressure readings and then writes them to a network computer. Every so often, we get the "blue screen of death" when running the program. Sometimes there are problems with the network computer, so there is am option inside the program to send all the data to the local hardrive. This is basically how we check to see if the problem is related to the network, or if it is the Labview system. However, the network has never been the cause of the blue screen of death(since we have also received the blue screen while writing to the local hardrive). Furthermore, the system only gives the blue screen ever so often, not all the time. The error message is attached, and seems to be memory related. I should also mention that we run two labview program at the same time, one controls a series of valves, and the other displays all the data be recorded the the network computer. After about 10 reboots, as a desperate attempt, we only ran the valve program, and it seemed to work, but it may just be luck. Another attempt was and option in windows(XP) called "paging" which we turned off. Last I know the system was working, but under the above mentioned conditions which will not work for day to day testing.
Any help would be greatly appreciated.
Thank you
Attachments:
Error message.xls ‏14 KB

Hi,
I found a post that looks like it might be a similar issue. The first link does not seem to be valid any more. Below are three more external links that also describe this error message.
http://www.5starsupport.com/info/stop_error.htm#7a
http://www.osronline.com/ddkx/ddtools/bccodes_2vjb.htm
http://www.microsoft.com/technet/prodtechnol/windows2000serv/reskit/prork/prhd_exe_qofl.mspx?mfr=tru...
I hope this helps!
Regards,
Missy S.
Calibration Engineer
National Instruments

PSC 2355 Blue Screen of Death - Error:0x889ff020

I'd sure like to resolve this issue and get my favorite printer/scanner/copier running again.
The printer used to be attached to an HP laptop with Windows XP SP3. I moved it over to my HP desktop Windows 7 computer to do some scanning. It worked fine. Then when I moved it back to the Windows XP computer, it worked fine. The XP computer and this PSC 2355 which now has issues sat for several months without being used. When I turned on the XP laptop and printer, the small display screen on the printer was strange and garbled looking. I uninstalled the printer software on the XP laptop, restarted, and downloaded the appropriate drivers and software from HP. When I installed the fresh copy of the software and followed all the installation instructions, the printer worked for awhile. Then the next day, it went back to the garbled looking small display screen, and then it gave me the Blue Screen of Death.
I wondered if the BSOD was showing up because it's one of the printers involved in the lawsuit over the printer cartridges causing lots of pop-ups and apparently other issues. So to "reset" the printer, I popped out the ink cartridges and reinstalled them. That didn't work.
Can this printer be saved, or is it fit for the scrap heap?

P.S. I tried swapping out the power cord that attaches to the transformer and goes into the outlet yesterday. The printer sat at the blue screen of death. In frustration I left the room for about an hour, when I came back and hit the On button, the printer acted normal and worked. I turned the power off last night with the button.
Today I went to turn it on, the swapped out power cord was still plugged into the transformer and the wall, but it doesn't work now. The power light blinked green for a little bit, then went out. Now the HP invent screen is displayed and the power light is off. Hitting the power button on the printer doesn't do anything - the HP invent screen on the printer stays illuminated. Could the problem be the power button itself? Could the problem be the transformer and/or cable running from the transformer into the printer? I think the problem is most likely with the power, but I'm running out of ideas.

HP Pavilion 750n - Windows XP Blue Screen of Death Error

Hello everyone - I hope I can get a reply to fix my son's computer (I can't afford to buy a new one).
I received the blue screen of doom and I was not aware that Windows had a patch to fix this before the error occurred. I tried to restore my system to when I first bought this computer without losing all my data (specially my pictures). Now the system starts but it gets stuck on the page that asked if you want to logon on Safe Mode or Regular Mode, etc. No matter what I choose the system keeps coming back to this same screen.
I read the following on the HP web side but I'm not sure how to get this diskette/cd or whatever they have available:
Preventing a Windows XP Critical Error
If you purchased your HP Pavilion home PC between September 2001 and February 2002, your PC may experience a Microsoft® Windows® XP critical error. To prevent an error that may cause your computer to be unusable, HP strongly recommends that you go to the Microsoft Windows Updates Web site to download all critical updates. Without these updates, an Unmountable Boot Volume error may occur randomly, and if it does, the error creates a blue screen with the message: A problem has been detected and windows has been shut down to prevent damage to your computer. UNMOUNTABLE_BOOT_VOLUME…Technical Information: *** STOP: 0x000000ED
If this error occurs, you will be unable to fix the problem without a diskette that you can order from HP Technical Support.
The system won't let me send HP an email and I can’t see how to contact them just to ask for a price. Perhaps, there may be another place where I can get the diskette for this fix - does anyone know how to get the diskette or if I can download the fix from somewhere else?
Any help will be greatly appreciated!

Get BartPE or Ultimate Boot CD and you should be able to get the computer to a state that will allow you to copy your files.
If you have a spare computer or HD, configure the problem HD as a slave and you should be able to access your files.

Blue screen of death error on HP Officejet Pro 8500 wireless - HELP

Hi all
I have a officejet pro 8500, used (rarely) in a home office environment, probably done no more than 1000 pages total. Turned it on today to print something, powers up ok with no errors, sounds normal, but when sending something to print I get a very odd error - the LCD display goes blue and displays a white power button symbol (in very low resolution) with the error code B8711D7C below it. This is on the screen for a couple of seconds before a white screen with "Turn power off then on again" message. So I hit the power button to turn off (which it does) but restarts automatically. After rebooting it comes up with the "improper shutdown" message and it's back to the main screen. This happens every time a print is sent. However, copying works. I guess the next thing to do is to hook another pc up to the printer or remove/re-install drivers, but I'd really like to know what this error code is...any suggestions?
Many thanks

I have same printer and have the same error code b8711d7c. I almost exactly the same, I hardly use the the printer, less than once a week. Did you manage to solve this ?

Windows "Blue screen of Death" when booting computer attached to LabVIEW PXI realtime system

Good Morning (at least in the western hemisphere)!
I'm having a problem on two test systems where intermittently, at least on one machine, I get a Windows "Blue Screen of Death" error message when booting the machine connected to a PXI RT system. I reloaded the RT systems software yesterday (LV RT 7.1.1, NI-VISA 3.3.1) and am having this problem on two different setups, two laptops, two PXI chassis. Our short term work around has been to boot with the network cable removed at one end or the other, but these are the baseline models for a larger test system in the design/construction stage that will not be used by knowledgeable engineers but by (probably more knowledgeable!) technicians. Any ideas would be a help
Thanks again,
Putnam
Certified LabVIEW Developer
Senior Test Engineer
Currently using LV 6.1-LabVIEW 2012, RT8.5
LabVIEW Champion

Blue screens are almost always caused by drivers and not by applications, so chances are there's a problem on the driver level. The crash log file will be instrumental to diagnosing this problem.
Turn on the crash event logging as described in this Microsoft KB:
http://support.microsoft.com/kb/314084/EN-US/
...and then post the details from the crash found in the Windows Event Viewer here. That will help us narrow the problem down.
--Paul Mandeltort
Automotive and Industrial Communications Product Marketing

Blue screen of death frequently

My father is having regular (once every week or so) blue screen of death errors. He isn't at the computer when they happen. I would like to see if anyone can take a look at the dump file(s) for the root of the issue. The dump files can be found at http://rapidshare.com/share/322F3FF41DCE0C7F22CB34977062CCB3.
Thanks,
Jeff

I didn't check every dmp file, but several I checked all pointed to the same culprit, graphics driver. Atikmdag.sys to be exact.
First step would be to download and install the latest driver for whatever card he has. I'm not sure what your technical level is...this is pretty straightforward if you know what you're doing, but maybe not so much if you don't.
Easiest way is to find your Computer icon in Explorer or the Start menu, right-click on it, select Manage. Click on Device Manager in the right-hand pane, expand Display adapters, and the model will be listed. Google that and use the ATI driver
from an ATI site, not what the PC vendor provides.
Installation should be pretty straightforward when you download and run the installer. I would recommend extracting the files and manually updating the driver rather than running the vendor's setup routine, especially if your Dad isn't a gamer, but
it shouldn't hurt. Extraction/manual installation is a bit more involved....
If that doesn't help, I did see a few references to a process that a guy who seems kind of kooky posted on several sites. It was met with some criticism because his use of English isn't very good I think, but some people claimed that it helped their
problem.
http://www.tomshardware.com/answers/id-1656824/atikmdag-sys-error-bsod-startup.html
If none of this helps, take detailed notes and post back, I'm sure I or someone else can help further if you need it.
Good luck!

Windows 8.1 Blue Screen of Death "Critical process died" after Windows update

Hey there, my Envy laptop has the "Critical Process Died" blue screen of death error after doing 3 things today:
1. A BIOS update through HP Support Assistant.
2. An x64 windows process update (optional) through the Control Panel.
3. An NVIDIA update.
What can I do to fix this error? I'm okay with a complete system wipe. Please help.
*Windows 8.1 64bit

The only option that worked for me was to "reset" my PC, as in a complete wipe. it's working properly again, when I read reviews of windows 8.1 I didn't really believe the people who said stay away from it, but since I've had more problems than I'd wish to, I'm too afraid to go back to it. Thanks anyways guys.

HELP!!!! Blue screen of death, IPOD a p.o.s.....

In advance - thank you to anyone who can help and/or explain things to me. I'm better than your average bear at tech stuff, but this is well beyond my knowledge area. It's a version of the same problem everyone seems to have:
1. Ipod worked successfully for 14 months. (2nd generation, no clickwheel)
2. Connected, ipod claims needs to be reformatted, crashed during.
3. Apple store reset ipod for a mac, still needed to reformat for windows at home.
4. Several crashes and various states later, am now repeatedly getting the following:
- Computer recognizes Ipod, itunes and updater won't.
- open updater to reset ipod, within minutes get blue screen of death.
- sometimes only connecting ipod will produce blue screen of death
- Error messages are as follows:
STOP 0x000000EA THREADSTUCK_IN_DEVICEDRIVER (Q293078)
- Event log is telling me the following:
"The Parallel port driver service failed to start due to the following error:
The service cannot be started, either because it is disabled or because it has no enabled devices associated with it."
"The device, \Device\Harddisk1\D, has a bad block."
"The device, , did not respond within the timeout period."
"An error was detected on device \Device\Harddisk1\D during a paging operation."
- What I have tried: uninstalled and reinstalled ipod/itunes, reset computer to previous dates settings, disabled/enabled through device manager
So, short of heading off to steve job's house to yell at him, what should i do?????? The apple store people claim the actual ipod is fine. is the problem my computer? the cord? the ipod?
Specs: Gateway 200, Windows XP, running through a firewire port.

I will be going away for a long time in a few weeks, as we travel across country for the last move of our lives (and then it will be several weeks before I get internet service again, so I may be off this forum for a month or more). But with you, JB, Charlie and so many others (Otto is in his periodic helpful moods right now :>) I'm sure I won't be missed.
my sympathies ... asset disposal in NZ and moving to NC with a few suitcases was traumatic enough ... moving from one apartment to another in the same
b complex
after a year was not fun ...
now that Buegie's first aid kit is doing point-duty on some of the installer errors, i think i'm going to be able to spend some time over here again ... so some additional reserves will be available. (amazing how even when treating this as a full-time voluntary-work thing, it's still possible to get overwhelmed for a week or two ...)
love, b

Error 13 = Blue Screen of Death?

Thought I'd try this board and see if anyone knows anything about 'error 13' and Panther.
I have been plagued by this error message which pops up whenever I try to print from either of my printers or burn a CD. This all happened after I tried to load a demo version of Adobe Illustrator CS2.
Over the last day I have tried the following:
* deleted the apple.com.print preferences
* reset the PRAM
* unplugged, unpowered and restarted the printers and their USB connections
* deleted the printers from the print setup utility and tried to reinstall them (but there too I get the 'error 13' message. Printers won't load but they do show up as if they loaded. Just won't work, that's all.
* tried logging in as a new user, and then the printer message is "Not enough RAM" to print.
* repaired the disk permissions from the CD
Generally I've done everything I can think of... except to reload the OS, which I hesitate to do because I have to first load Jaguar, then the Panther update, then the other updates. Last time I tried that things didn't quite work out.
I do have an external backup drive, which also got corrupted as I tried loading the Adobe Illustrator CS2 on that disk too. Dumb I know...
So... anyone know what 'error 13' means?
Is 'error 13' the Mac equivalent of the Windows Blue Screen of Death?
Thanks for any input...

Hello Pawel,
I have looked over the service request you mentioned about acquiring 2 PCIe-6537 at 20MHz sampling rate on all 32 lines. In order to narrow down this issue, I think it would be best to try only acquire from both cards without doing any triggerring etc. Also when performing this test, I would only want to acquire from 8 channels on both cards to see if this reproduces it. If this works, we can slowly add more elements to narrow down what the issue is and make us more effective to solve the problem.
I also wanted to ask if you have tried this setup on another machine and if it worked.
Along with this, have you tried to create two Digital Tasks in MAX and try to acquire for the same amount of time to see if the issue reoccurs here? This would tell us if this problem is connected to the driver/computer or LabVIEW.
Jim St
National Instruments
RF Product Support Engineer

IPhone5s stuck in recovery mode after lots of times displaying blue screen of death, cannot restore it as iTunes displays error 14 on verification, same time phone crashes again with blue screen.

hi, my iPhone5s is only 3 months old, it has been like a whole month now since it started crashing, displaying the blue screen of death, since yesterday it was in the loop of restart-crash, and now it is stuck in recovery mode after lots of times displaying blue screen.
I cannot restore it as phone continues crashing again with blue screen, when iTunes displays error 14 on verification.
help please, this phone is all the means of communication I have.

It's a hardware problem. That's it. You shouldn't bother yourself with this situation. Just see an AASP.

Who knows how to fix iphone 5s blue screen of death and itunes error 4013?!

Hi
Last day, dec 14th, a blue screen of death appears on my iphone 5s, aparently because I was installing facebook app.
After that, the iphone remains restarting over and over non stop, until the battery shutoff.
I try to press home and power/sleep buttons for 10 secs, but stil continuous with the blue screen.
After that, with battery charged, I tried to hold the home button and simultaneously connect to an usb cable (the cable is in perfect conditions) to start itunes.
Its worked, but now, everytime shows an itunes message: error 4013, "the iphone cannot be restored".
What can I do now?!
Thanks

Hi Tks777,
Thanks for visiting Apple Support Communities.
If you see an "error 4013" when you try to restore your iPhone, try these troubleshooting steps:
Error 4000, 4005, 4013, 4014, and 4016
After you perform each step, try to restore your device.
Restart your computer.
Disconnect all your USB devices from your computer and connect to another USB port.
Use a different USB cable.
Uninstall third-party security software.
Try restoring using an alternate computer.
You can find the article with these steps here:
iTunes: Specific update-and-restore error messages and advanced troubleshooting
http://support.apple.com/kb/TS3694
Regards,
Jeremy

HP PSC 2355 Blue screen of Death and Error message/ blinking lights.

Hello, I have a HP PSC2355 that we recently moved, after we moved it started randomly locking up with the Blue Screen Of Death (BSOD), it would give an error:0X880529ec on the BSOD, further down the screen were the characters 1:H+x?+ The (ON) light was Blinking Green, the (!) light was blinking orange. This will happen regardless if the PC was on or not, it will happen when trying to print, sometimes only getting 1" of print at the top of the page. Currently running Windows XP, SP3 connected via USB. I highly doubt it is a PC issue as it will happen when trying to use it as a standalone copier. Sounds internal to me, I do have electronics experience ( I repair televisions ) If someone has any ideas, let me know.....
I might also add, you dont have to be printing for the error to crop up, you can just plug it in and wait, later you will see the BSOD and the blinking lights.
Message Edited by lesterl on 07-04-2009 06:49 AM

Well, decided to try to print from another computer, d/l the smaller driver only package (26meg), did a fresh install after finally getting the printer to stay on for a few minutes, it took forever on the first part of 8 on the installer (cable already plugged in), and it has been on for many hours now, printed many things, yet to have an error. Dont know if the driver installation did anything with the firmware on the unit or not.
Differences:
Celeron Laptop (virus/trojan free) now
Was on a P4 desktop that had not been so lucky with the trojan/viruses.
Upstairs on my dining room table now
Was in basement in wife's scrapbooking room.
Dunno, time will tell.......

Blue screen of death of hp desktop p6212f error 0x34

I was resetting my PC and had a power outage during recovery (with a surge protector hookup).
It says problem detected and shut down windows to protect pc. Cache_manager
Error 0x34
HPs excellent customer support said it would be fixed if I purchase a recovery disk after a long time of harassing warranty offer. So I purchased recovery disk. It did not work. The blue screen of death says to possibly disable caching and shadowing in advanced mode through f8. I can not enter my profile. Each startup goes to blue screen. How do I disable caching or shadowing memory option. Is there any other option that doesn't consist of being taxed by HP which upsetting. I going for my bachors in IT, however, this one has me stumped. Please help.
Stop error 0x34

Not sure if this will actually help:
http://answers.microsoft.com/en-us/windows/forum/windows_7-system/windows-7-random-blue-screen-error...
If you can not install from recovery disks, I would start to think about hardware problems. Get the hard disk manufacturer's drive certification iso image and make a boot disk and test the hard drive and use the disk to fully erase the drive before another attempted install. Use memtest86 over night to test the memory. Make sure all your fans are spinning and especially check the one on the video card and CPU. Check the video card and mother board for bulging, rounded or leaking capacitors.
Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may click on the white star in the "Kudos" button for any helpful post to give that person a quick thanks. These feedback tools help keep our community active, so you receive better answers faster.

Blue screen of death with HDD Hardware Test error on iMac HELP!!

My iMac is not starting up. It just get the blue screen of death during startup. It is a 2.66 mghz duo with 2gb 800 ram. I was able to get the Hardware test to run and got an error of 4M0T/2/40000004: HDD-1560. I am assuming it is an error with the internal hard drive since I have nothing else hooked up to the mac other than the keyboard and mouse right now. Does this code mean my hard drive is completely shot? Any help would be appreciated.

4M0T/2/40000004: HDD-1560.
Either failing or failed
You can have Apple replace the drive at a nearby Apple store or an Apple certified repair shop.
Apple - Support - Check Your Service and Support Coverage

Blue screen of death error

Similar Messages

Maybe you are looking for