Blue Screen of Death - Need to reinstall Windows 7.

Hi - I installed a GIS program on Windows 7 which I have via Boot camp. This program has caused Windows to crash every time I boot it up. Any advice/instructions for reinstalling Windows from the original CDs? The simpler, the better.

maraisvanzyl wrote:
When i start up my envy 15-j163ei i get n BSOD with a code stop : o×0000007b screen and i just reinstalled win7 still the same problem please help
Is this REcovery restore or custom self install???
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

Similar Messages

Blue screen of death after installing Boot Camp on Windows 7

Hello and thanks for the help!
Brnad new user to Boot Camp here. After a new install of Windows 7, I install Boot Camp but then when rebooting Windows I get the blue screen of death. When letting Windows attempt a repair, it fails and I am forced to Recover Windows 7 to a state before I installed Boot Camp.
Help!?

Solution for this problem is simple. You have to apply Mac Book Air SMC Update 1.7 which you can do from Mac OS X with Software Update or you can download required update manually from Apple support site. If you don't use BootCamp and have installed Windows without it, you will have to boot Mac OS X from external drive just to apply required update. After you applied SMC update, you can boot to Windows and apply BootCamp update 3.2 and 3.3.
There is a known problem with Mac Book Air EFI Update 2.3, which you won't be able to apply and it will show in Software Update every time you check for updates. There is no solution for it yet.
You get BSOD if you have BootCamp 3.1 and Windows 7 SP1 installed and you have commited Windows update which will break applemtp.sys as your SMC firmware is too old. It applies to Windows 7 32 bit and 64 bit versions in BootCamp or native install.

Blue screen of death during start-up

Hey Adobe-Community,
I am having troubles with After Effects CC again. Every time I want to open After-Effects i get a BSOD. The last thing I can see is the opening-loading-thing (talking about that thing just the after effects version of it, logically I cant make a screencap of the AE version). I dont even get anything written in there - no "loading blabla" or "searching this-and-this" and so on - just the empty image without any information. It is like that for about five seconds before my audio starts jamming and I get a Blue Screen of Death.
System Specifications:
Windows 7 Home Edition - 64 Bit
CPU: Intel i5 2520m 2.5 GHz
RAM: 8 GB
Graphics: Intel HD Graphics 3000 and Nvidia GeForce GT 555M (I think I am currently running on the GeForce - does anybody know how I can check which card I am using right now...)
110 GB SSD - 40GB empty
500 GB HDD - 150GB empty
Laptop Screen: 1600x900
External Screen:1920x1080 (always using both screens)
Things I tried already:
Booting in Safe Mode
Result: Same as before - but without the Blue Screen. Just nothing happened. The Start-Up Screen of AE was showing, but again without information for about 5 minutes before I wanted to close it. Task Manager told me that there is no Application running, just a process. So that one didn't work.
Reinstalling After Effects
Same result as before - Blue screen and empty Start-Up-Screen
Reinstalling my Graphics Driver
After a bit of googling around I found some people mentioning that a Blue screen might come from troubles with my Graphics - so I reinstalled the driver from the GeForce. Same Result as before - Blue Screen.
I was able to run After Effects without any troubles just a couple of days ago. I didn't install any Plug-Ins, any new software, I cant even remember a Software update from any other software or anything (besides the Update for After Effects and InDesign from today).
Please, I really don't know what else to do.

Provide the crash details from your event viewer:
Working with your Operating System’s Tools
Mylenium

Sat M40-236 Blue Screen of Death

Just a few days ago i've bought Toshiba Satellite M40-236. I disliked the pre-installed Windows XP Home Edition and installed Windows XP Pro with SP2 integrated. Afterwards i installed all the drivers provided and advised by Toshiba from: http://eu.computers.toshiba-europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU&teddProduct=5 38&cmsFamily=Satellite&cmsSerie=Satellite+M40+Seri es&cmsCategory=Notebooks&mode=allMachines&action=s earch
Updated Bios, Video drivers and so on. Everything worked fine, installed all the updates from Microsoft update site and then tried to install Windows Media Player from microsoft site. Then, when tried to open music file in media player the Windows shutted down with the blue screen of Death. After restart the blue screen remained. Tried to load to Safe Mode, Last good known configuration ... no result ... the blue screen remains.
Tried to reinstall Win XP HE from Recovery DVD-Rom, the same result ... after files are copied to HDD and the system is rebooted, Win XP Logo with running progress bar and suddenly Blue Screen of Death :(((
Tried to reinstall different verions of Windows (2000,XP Home, Xp Pro, 98SE) - no result, after it says Starting Microsoft Windows (during installation) the blue screen of death and nothing more .... STOP: 0x0000007E or STOP: 0x0000007F.
May be someone has the same? May be any solution of this problem? I think due to the Notebook is new one ... maybe there is smth with RAM ?

Hello Kresh
Well, its very difficult to say what is wrong.
I dont think that the BIOS is wrong because a wrong
BIOS update procedure has damage the motherboard and it would be not possible to run or start anything.
Sorry I dont have a proper answer.
In my opinion you should contact the Toshiba service partner because I dont think that you will solve this issue by yourself.
Ps: You cant downgrade the BIOS.
Only the ASP has a possibility to do this.
Bye

Blue Screen of Death After RAW Compatibility Update

My friend updated her 13" Black MacBook yesterday, specifically the "Digital Camera Raw Compatibility Update 2.3". After a reboot, she got the Apple "Blue Screen of Death", with no login window showing. Looking at system.log, there's a section that looks to be the culprit (this began after restarting due to the install of the update):
Nov 7 13:55:29 Philbert /System/Library/CoreServices/loginwindow.app/Contents/MacOS/loginwindow[31]: Login Window Application Started
Nov 7 13:55:30 Philbert /usr/sbin/ocspd[53]: starting
Nov 7 13:55:35 Philbert kernel[0]: display: Not usable
Nov 7 13:55:35 Philbert com.apple.launchd[1] (com.apple.WindowServer[50]): Exited abnormally: Hangup
Nov 7 13:55:35 Philbert com.apple.launchd[1] (com.apple.WindowServer): Throttling respawn: Will start in 6 seconds
Nov 7 13:55:42 Philbert com.apple.launchd[1] (com.apple.WindowServer[64]): Exited abnormally: Hangup
Nov 7 13:55:42 Philbert com.apple.launchd[1] (com.apple.WindowServer): Throttling respawn: Will start in 10 seconds
Nov 7 13:55:52 Philbert com.apple.launchd[1] (com.apple.WindowServer[67]): Exited abnormally: Hangup
Nov 7 13:55:52 Philbert com.apple.launchd[1] (com.apple.WindowServer): Throttling respawn: Will start in 10 seconds
Nov 7 13:56:02 Philbert com.apple.launchd[1] (com.apple.WindowServer[70]): Exited abnormally: Hangup
Here are some things I've observed/tried, many from sources via the Internet:
- I'm able to login in single-user mode
- I'm not able to login in Safe Mode (hangs on white screen with Apple logo)
- I've tried booting off the 10.5 install DVD and running Disk Utility - verify/repair disk, this comes back ok. However, if I try to verify/repair permissions, it runs for about 10 - 20 mins then freezes. I let the frozen process run overnight (10-12 hours) and no feedback. I can move the mouse, but I cannot select anything.
- When the laptop is booted and on the blue screen, I can connect to it via AFP
- I've tried manually changing the permissions of "/", by doing - chmod 775 /; chmod 1775 /;
- I've tried removing the com.apple.WindowServer.plist and com.apple.loginscreen.plist files in case they were corrupted by the update
- I tried running the "installer" command to re-install the update package from the command line. I run it with the "verbose" flags, I get no output and the process hangs.
Since I can connect via AFP I figure I'll be backing the data up and re-installing OS X. Pretty lame though, considering this failure was caused by running a Software Update. Anyone have a last minute suggestion for me before I go down that path?
I have the full system.log if anyone is curious!
Cheers!

i don't think this is a router issue...i believe it's a hardware issue...this error occured when computer is not getting sufficient memory, drivers are not installed correctly or due to invalid driver installation of any devices installed on the computer...to just isolate the problem try connecting computer directly to the modem and check are you are getting a same error message or not and let me know.

Bootcamp Windows 7 Blue Screen of Death on MBPwR

Hello all, I've never needed to use this before but gosh darn it I need some advice, because I can't figure this out...
I'd rate myself a 9 out of 10 in "Windows PC" experience
And maybe a 6 out of 10 with Macs, I'm still new!
I just bought the new Mac Book Pro with Retina Screen in early July, I can't remember the exact date. But it hasn't been thirty days yet, so if you think that's my best bet to try and get an exchange here, let me know.
MC975LL/A
PROBLEM : Mac OSX Lion 10.7 works wonderfully, not a problem in the world, smooth as butter – the issue is Windows. I like to play some games and OSX doesn't play well with some Windows based games so I always install it on Bootcamp. Well, this has been a neverending issue on my new MBPwR because I can't seem to get it to work correctly.
      1. Here's how it started - I installed Windows 7 Ultimate x64 through Bootcamp, via my Superdrive and it ran well for a week or so. After installing a game and some other software (Steam) please take that as a coincidence as I did, I don't think Steam had anything to do with the crash, more likely it was something 'game' related, HDD, RAM, CPU, GPU? The computer started to get the "Blue Screen of Death" that Windows computers get, specifically: page_fault_in_nonpaged_area, I've never seen it before and I've owned a number of Windows computers over the years!
     2. Is this my fault, or something deeper? - I can't figure it out, is this a hardware problem or a software one? I reinstalled Windows 7 yesterday and attempted to try again. Just a chance my installation was messed or something, well it happened literally after five minutes of booting into Windows 7. After it happened the first time I used a memory check and a hard drive check software and both came up flawless. Some online on other boards although Windows based have suggested this error can be caused by the RAM and the CPU or the GPU, even... Is this true? As there is no way to test it, maybe exchanging this computer is the best option?
    3. As as a side note... - Has anyone else had a crawling slow boot into Windows 7? It takes my MBPwR almost five minutes of a top left-hand blinking cursor to actually boot to Windows 7.
So did I have some really, really bad luck here with a new computer? Or is this somehow software related? I can answer any questions if you have them so we can try and figure this out!
Thanks!

Did the Nvidia driver install okay? Some users had to reinsall just the driver from Apple Windows Software Support.
Did Windows DVD not find anything wrong?
Is Windows set to be default boot OS in the control panel for selecting the boot volume?
There probably is a leaning curve and bleeding edge sortof with any new logicboard and setup.
Apple has issued a firmware upgrade for some models - I thought Retina - the MacBook Air has a serious problem under Windows.
Mac will run hotter under Windows. Maybe an error message.
GPU-Z:
http://www.techpowerup.com/downloads/SysInfo/GPU-Z/
AIDA64 Extreme Edition
http://www.aida64.comhttp://www.aida64.com/product/aida64-extreme-edition/overview
CCleaner
http://www.piriform.com/ccleaner
How to view error message:
From Control Panel-> Admin. Tools-> Event Viewer-> Windows logs:
Check Application and System Folders for Red highlit messages. Note that you can right-click clear these log folders.
Memtest
This is a step by step guide with audio and video to explain how to use memtest to see if your memory is defect. Another thing to add is that some errors will not be found on the first pass, best to do at least 3 passes.

BLUE SCREEN OF DEATH (the wondows one)seriusly need help.

okay, well the storry goes like this, i'm on my way home on a subway, when all of a sudden my ipod gets VERY laggy, then just freezes, i try everything i can for a while, but it refuses to do anything. I get home, plug it into my pc, it says the ipod had been ****** up, it needs to be restored, i say "deal" it gets restored......and nothing happens...
i unplug the ipod, plug it back in, it says it needs to be restored again ...follow the procedure, now a bit confused.
Then (as the website says " third time's the charm") i connect my ipod, i get the icon in bottom right of my pc showing that there is something connected, and supposedly it's an ipod, however nothing shows up at my computer, or itunes.
then give it a minute or two, my computer flashes with the windows infamous blue screen of death waits a second, and restarts.
is there a way to solve this ? , i can't even SEE my ipod ...
Windows XP Pro

ough, i've tried resetting it, but that did nothing
...(the menu and center key) and the blue screen of
death only happens when ipod is connected, my pc runs
fine and stabel without the ipod...
is there a way to reformat the ipod without
connecting it to a pc ?
may be i could connect to macs at school and format
it there ?
Well, if you really want to reformat your iPod Hard Drive, I don't know if there's a way to do it without hooking it up to a computer.
Nevertheless, you can always try these steps on your PC. If this still doesn't work, try your friends' PC but make sure no iTunes software is installed... In your PC's case do these:
1. uninstall iTunes (it then asks to restart PC)
2. after restarting plug in your iPod to a usb port
3. after windows recognizes the iPod, open My Computer
4. look for the drive letter that refers to your iPod
5. right click on it and click reformat
6. once formatting is done right click on that drive letter again and click eject.
7. wait for the "do not disconnect" warning on your iPod to disappear then remove usb connection
You can then restore or update the iPod software by reinstalling and using iTunes.
I personally haven't reformatted my iPod yet but I did try doing steps 1 - 5 without actually clicking "format" in my other PC. Just give it a run and hope it will work. Good luck.
Self-Built Windows XP Pro Dual Booting XP Pro & Vista Ultimate

Persistent blue screen of death problems on Toshiba laptop pc; need help

hey, guys,
I was hoping you could help me out here. I have been experiencing persistent blue screen of death problems on my Toshiba laptop since December 21 of 2014. The first two times I started having theses persistent issues, I downloaded a bunch of redundant programs and games onto my computer, some of which were virus infected. I had these programs on my computer for a while before my laptop was taken in for repairs. I eventually uninstalled some unnecesssary programs from my pc, hoping it would have fixed these issues, even tried windows update. I didn't have a clue that my problems were due to virus infections/malware until the two most recent times my computer was taken in for repairs; I had always been thinking it was a defective driver. My laptop has already been in for repairs at least twice due to these perpetual BSOD problems; I had Norton Internet Security installed on my pc before the Geek Squad team (who repaired my computer and found 312 traces of malware in my system during the virus test; I was told by them that I had mistakenly downloaded infected web browsers onto my pc) switched me to Webroot SecureAnywhere (they said it was better at detecting viruses/malware than my NIS), but even after my pc has been through repairs twice in a row, I am still experiencing blue screens (this only seems to have happened once each week, and on one occasion, I went through almost two weeks without it occurring). I am pretty sure, that I haven't downloaded anything onto my computer infected with viruses/malware (each of the scans done by my Webroot antivirus have found nothing), I have only a few games/apps installed on my pc, and what I downloaded all came from Microsoft's official website. I can't afford to be wasting any more money on repairs, and I am desperately searching for any possible way to fix this myself. Any help would be appreciated. I have a copy of two of the memory dumps from my most recent crashes (I also have the dump reports from my most recent crashes dating back to March 6; I got these from an app from NirSort called Blue Screen View, if you need those) I also have my system specs:
http://1drv.ms/1I6AsaE
http://1drv.ms/1Qdsb7T
Note that many of these earler dump reports (the ones from March) came from viruses. The ones from most recently as last month, I am not sure about.
Attachments:
POPCHOCK-PC.txt ‏149 KB

Satellite C75D-B7300 (PSCLEU-009004)
Thrashing about this way gets us nowhere.
Best to restore the hard disk to its original out-of-the-box contents.
Settings > Change PC settings > Update and recovery tab > Recovery tab > Remove everything and reinstall Windows
Use the freshly restored machine for a day or so before any installations of hardware, software, or updates of any kind. If you get no crashes, the problem is not likely due to hardware.
Then add updates and other things slowly, keeping track of them. If you get crashes after that, give us the corresponding dmp files.
-Jerry

Ipod crashes windows (blue screen of death)

Hi all. A bit of background info:
A couple of months ago the hard drive crashed on my friends computer. They had to reinstall their OS. Thankfully they had made backups of most everything and were able to get most things reinstalled successfully.
Now they are using a 15g ipod connected through a firewire port on an HP laptop. They do not have a USB adaptor, so gotta go with the FW.
Anyway, when they connect the ipod the computer completely crashes to the blue screen of death and does the physical memory dump. There is an error message, something along the lines of a driver issue.
I know this is vague information, but any pointers on how to proceed in troubleshooting this would be greatly appreciated, thanks
Frost

hi Frostine!
Anyway, when they connect the ipod the computer completely crashes to the blue screen of death and does the physical memory dump. There is an error message, something along the lines of a driver issue.
we can sometimes narrow this down a bit by checking on the numerical and text codes showing up with the blue screen. (ie 0x[zeros/letters/numbers] CAPSANDUNDERSCORES)
here's a reference on the sorts of things i'm checking on:
Troubleshooting Windows Stop Messages
can you get that information for us from their PC?
(if the screen is specifying the file that Windows is crashing on, that would be helpful to know too.)
love, b

Windows Vista Crashing When Ipod is Plugged In. Blue Screen of Death?

A week ago, my computer suddenly started to reboot whenever I plugged my 5th generation 80 gig Ipod in to sync. A blue screen will pop up, and automatically restart.
I do not believe this is the blue screen of death that appeared 2 months ago. I have upgraded to Itunes 8.0.1 when it was first released, and I had no problems until a week ago. I haven't heard of anyone receiving the blue screen of death since the update to Itunes 8 was released.
I have also lost all of my music from my Ipod, so I am anxious to figure this out.
Here is what the blue screen (certain passages paraphrased, the specifics were copied directly):
A problem has been detected and windows has shut down to prevent damage to your computer.
BADPOOLHEADER
If this is the firs time you've seen this stop error screen, restart yoru computer. If this screen appears again, follow these steps:
Make sure all hardware and software is properly installed
If it continues, disable/remove any newly installed hardware and software. Disable BIOS memory options such as caching or shawoding. If you need to use safe mode to remove or disable components, restart your computer, press F8 for Advanced Sartup options, then select safe mode.
Technical information:
*STOR: 0x00000019 (0x00000020, 0xB7C4CE50, 0Xb7C4CE68, 0x0A030203)
/end blue screen
Any help you have would be greatly appreciated!

Have you tried the troubleshooting advice in this article?
http://support.apple.com/kb/TS1502
Was a file name mentioned in the stop message? usually something.sys That can be a clue to the problem is the Apple advice doesn't help.

Blue Screen of death - now can't load Windows (even in safe mode)

Last night laptop (Satellite L500 19Z; Win 7 64 bit) crashed whilst playing CIV4. Got a blue screen of death; before I had chance to read any of the error messages on it the machine rebooted.
It loaded windows in safe mode fine then, and informed me as it had loaded safe mode OK the problem will be related to some recently installed software and I should uninstall programs I'd installed until it would load normally. As it was late last night I shut down and thought I'd sort it in the morning (in retrospect this may have been a mistake ....).
Today, when the machine tries to boot up it attempts a Startup Repair; unfortunately this fails every time and it says "Startup repair has tried several times but still cannot detemine the cause of the problem"
I looked at the log it produces but it passes all the individual tests.
I also can't access the advanced options for system recovery & support, which appears on the Startup Repair dialog box as it demands I be logged in, which apparently I'm not (presumably as the machine never got to the windows login screen before trying the startup repair). The error message reads "you must be logged in to access system recovery options. If you are having trouble logging in please contact your computer administrator for assistance. please click OK to restart the computer."
I've had a go at booting into the various advanced options (safe mode, safe mode with command prompt etc. but the outcome is the same).
I also tried the Repair your Computer option from the advanced boot options screen, but after the screen where it asks you to choose the language and keyboard, I get the same login error mentioned above.
Is there a way to repair or even run the hard disk based windows recovery (haven't got the recovery DVD with me as I'm away from home for a couple weeks) without logging into windows? I would have expected there to be but have yet to figure out how to do it.
(there are no disks in the disk drive, no other devices attached to the laptop - I've tried it with mains power and with the battery and have not noticed any differences)
Thanks
James

Normaly the reinstall data is on a separate part on your HD, not in Windows.
The register is only used for Windows.
If it doesn't work you can always try to reinstall from a DVD later.
It does mean all your data on C:\ will be gone. If you can hook your HD on an other PC you can try to safe your work with a recover prog.

X200 Tablet - Wacom Pen Blue Screen of Death on Windows 7

Hello...hopefully someone can help & point me in the right direction...I have a Lenovo x200 tablet PC (Stylus Only Version) - and recently installed Windows 7 Professional (64bit)
The OS install went perfectly...Once installed, I did all the Systems Updates for Windows 7, including all the updates for Lenovo using System Update 4.01.....However, I have an issue that I cannot seem to figure out...
PROBLEM # 1
The biggest issue I now face is, whenever I put the Digitized Pen next to the Tablet Screen within 2 seconds I get the 'Blue Screen of Death'....and it automatically Reboots....This ONLY happens when I touch the Pen to the screen....
I uninstalled the 'Wacom Drivers' - within the Device Manager, which i assume were installed by the system update(s)....After, uninstalling the issue of the 'Blue Screen' from happening when the pen touches the screen is gone.....However, I have no way of being able to use the Pen...it does not show any cursor or inking....Is there a specific DRIVER that I should be installing on my own to make this work properly - without getting the 'Blue Screen of Death' each time?....I really need some guidance on this issue.
PROBLEM # 2
My Second issue, which is suddenly occured after day 2 of installing updates is the Lenovo System Update 4.01 -- Suddenly, after working on day 1 - now, whenever i try to 'Check New Updates' i get a popup that says "An error was detected with the Package catalog for your system on the System Update Server. Please contact the Support Center".
I called techical support on the phone - and they made it seem like this was not their problem and they could not help me...The odd thing is, that this was working before, and now all of sudden it doesnt work...
If someone can please advise me on what to do, especially with the Pen Driver problem, I would greatly appreciate it....Thanks!
Solved!
Go to Solution.

**FIXED IT** TWICE!
I've been messing with this on multiple machines at my school.
I was getting the BSOD, "no tablet installed" all that good stuff.
I installed this, that and the other thing.
After testing another machine, I read something in the BSOD that caught my attention.
It mentions resetting the cache of the BIOS. I wasn't sure what that meant, or how to do it.
But I was able to get into the BIOS (F1 on the Lenovo splash screen) and I just tapped F9 (load default Bios options -paraphrasing) Then I hit ESC- it prompts to save the settings, agree and let the computer continue to boot.
I was able to test the Pen at the login screen. Just repeated this process on another X200 computer and it worked again.
Try it.
Good luck!

Blue Screen of Death in Windows

Hello,
I am getting the Blue Screen of Death about once a every few days. My iMac does not do this. Please help. My HD is defragmented. I have Windows XP Home.
Thanks!

Having same problems on Windows XP SP3 on my MacBook. Both Mac OS X and XP are up to date. I'll admit I haven't defragmented in a while, but I haven't been using it that long and I don't do much heavy stuff on it so I didn't think that'd be an issue(??). It'll do it without warning, normally a blue screen almost immediately followed be a reboot; sometimes it's a screen-freeze instead. It only started a month ago and when it happens, it's only on XP and every few days, but I've lost work because of it and it's driving me nuts!
I'm sorry I'm not awfully technical, but has anyone got any ideas? Would reinstalling Windows be a good idea and if so how would you do it?
Thanks for any help!
Mike

IPod Causing Blue Screen of Death on Windows Vista

I'm posting this in the correct forum now:
For some reason, all of a sudden, whenever I plug in or unplug my iPod to my computer, the computer crashes and quickly shows a blue screen of death before restarting. It has not done this before today. I haven't done anything out of the ordinary with the iPod or the computer that would cause it to do this.
When iTunes opened, it said there was a Windows Update to fix a problem with iPods corrupting upon disconnecting from the PC, but when I tried to download the update, it said something about the update not being needed for this system. The iPod isn't corrupted, everything is still on it. I don't know what the deal is.
I tried system restore back to like a week ago, but this did nothing to help.

First, update the USB Root Driver on your computer: http://docs.info.apple.com/article.html?artnum=305136 Even if there are no new drivers for your computer, follow the last part of the article and let Windows update your USB driver.
Second, be sure you are using a rear port on your computer.
Third, with only the iPod, mouse and keyboard connected (no speakers, no mic, nothing else), reassign the drive letter on your iPod. Try M or P or Z: http://docs.info.apple.com/article.html?artnum=93499

Windows 7 Blue Screen of Death from Apple Wireless Keyboard?

I've installed Windows 7 with Boot Camp 3.0 drivers on my Mac mini, and I suppose overall, I'm enjoying it. However, I'm getting a blue screen that seems almost random. Keyword is almost.
I've got my Apple Wireless Keyboard and Mighty Mouse paired, and they're both working well, however, I do believe I am getting some blue screens from my wireless keyboard.
It seems, at random intervals (usually when I haven't touched the keyboard and mouse for awhile) I get an IRQL blue screen and no information about what's exactly causing it. For example, if I'm sitting in the other room listening to music for awhile, and I come back and press the "next" media button on my keyboard, it'll crash and give me the blue screen. However, I've also tried pressing another random button (shift) to "wake" the keyboard if it had fallen asleep, which also results in a blue screen. The blue screens ONLY show up when I give input via the wireless keyboard. Or, if I leave the computer on overnight to download a file or something, the screen will sleep (which it should) then I'll press a button on the keyboard, the screen will stay asleep, and the computer will restart. Which is just a hidden blue screen I'm assuming.
I've tried reinstalling Windows (Clean/fresh install of course), installing/uninstalling drivers, pairing and re-pairing. I've also removed unnecessary/non-Windows 7 drivers that were installed with Boot Camp.
Outside of this blue screen, I am quite impressed with Windows 7. I just can't figure out what's going on. Is there any place I can get a description of what's causing this crash? Does anyone know what's happening or know a solution to this?
Thanks in advance, if you need more details, please ask.

Experiencing exactly the same symptoms, bugcheck/bluescreen only when touching the Apple wireless keyboard after a period of inactivity.
I have an 20" iMac, just upgraded Leopard -> Snow Leopard latest minor version and updated to Boot Camp 3.1 hoping they provided a fix, but the driver at fault (keymagic.sys) doesn't look updated and the issue is still there
Hopefully someone from Apple dev support is reading this, here's all the info I could squeeze from the crash dump:
=============================================
* Bugcheck Analysis *
IRQLNOT_LESS_OREQUAL (a)
An attempt was made to access a pageable (or completely invalid) address at an
interrupt request level (IRQL) that is too high. This is usually
caused by drivers using improper addresses.
If a kernel debugger is available get the stack backtrace.
Arguments:
Arg1: fffff80002e33440, memory referenced
Arg2: 0000000000000002, IRQL
Arg3: 0000000000000008, bitfield :
bit 0 : value 0 = read operation, 1 = write operation
bit 3 : value 0 = not an execute operation, 1 = execute operation (only on chips which support this level of status)
Arg4: fffff80002e33440, address which referenced memory
Debugging Details:
READ_ADDRESS: fffff80002e33440
CURRENT_IRQL: 2
FAULTING_IP:
nt!IoIsWdmVersionAvailable+0
fffff800`02e33440 80f906 cmp cl,6
CUSTOMERCRASHCOUNT: 1
DEFAULTBUCKETID: VISTADRIVERFAULT
BUGCHECK_STR: 0xA
PROCESS_NAME: System
TRAP_FRAME: fffff88002f2f0c0 -- (.trap 0xfffff88002f2f0c0)
NOTE: The trap frame does not contain all registers.
Some register values may be zeroed or incorrect.
rax=fffff88002f2f100 rbx=0000000000000000 rcx=0000000000000006
rdx=0000000000000000 rsi=0000000000000000 rdi=0000000000000000
rip=fffff80002e33440 rsp=fffff88002f2f258 rbp=fffff88002f2f2b0
r8=fffff80002a4f000 r9=0000000000000000 r10=fffffa80027f3010
r11=fffff88002f2f208 r12=0000000000000000 r13=0000000000000000
r14=0000000000000000 r15=0000000000000000
iopl=0 nv up ei pl zr na po nc
nt!IoIsWdmVersionAvailable:
fffff800`02e33440 80f906 cmp cl,6
Resetting default scope
LASTCONTROLTRANSFER: from fffff80002ac0469 to fffff80002ac0f00
FAILEDINSTRUCTIONADDRESS:
nt!IoIsWdmVersionAvailable+0
fffff800`02e33440 80f906 cmp cl,6
STACK_TEXT:
fffff880`02f2ef78 fffff800`02ac0469 : 00000000`0000000a fffff800`02e33440 00000000`00000002 00000000`00000008 : nt!KeBugCheckEx
fffff880`02f2ef80 fffff800`02abf0e0 : 00000000`00000000 fffffa80`03375d90 00000000`00000000 00000000`00000000 : nt!KiBugCheckDispatch+0x69
fffff880`02f2f0c0 fffff800`02e33440 : fffff880`04a02e5d fffffa80`02a3add0 fffffa80`027e8b40 fffffa80`02a3add0 : nt!KiPageFault+0x260
fffff880`02f2f258 fffff880`04a02e5d : fffffa80`02a3add0 fffffa80`027e8b40 fffffa80`02a3add0 0000057f`fd5c5228 : nt!IoIsWdmVersionAvailable
fffff880`02f2f260 fffffa80`02a3add0 : fffffa80`027e8b40 fffffa80`02a3add0 0000057f`fd5c5228 fffff880`04a02dfc : KeyMagic+0x2e5d
fffff880`02f2f268 fffffa80`027e8b40 : fffffa80`02a3add0 0000057f`fd5c5228 fffff880`04a02dfc fffff880`00e5a2a7 : 0xfffffa80`02a3add0
fffff880`02f2f270 fffffa80`02a3add0 : 0000057f`fd5c5228 fffff880`04a02dfc fffff880`00e5a2a7 fffffa80`02a3add0 : 0xfffffa80`027e8b40
fffff880`02f2f278 0000057f`fd5c5228 : fffff880`04a02dfc fffff880`00e5a2a7 fffffa80`02a3add0 00000000`00000000 : 0xfffffa80`02a3add0
fffff880`02f2f280 fffff880`04a02dfc : fffff880`00e5a2a7 fffffa80`02a3add0 00000000`00000000 fffffa80`027fd9d0 : 0x57f`fd5c5228
fffff880`02f2f288 fffff880`00e5a2a7 : fffffa80`02a3add0 00000000`00000000 fffffa80`027fd9d0 00000000`00000010 : KeyMagic+0x2dfc
fffff880`02f2f290 fffff880`00e30c9b : fffffa80`027fd9d0 fffffa80`027fd9d0 fffffa80`027fd9e0 fffffa80`027fdc01 : Wdf01000!FxRequestBase::CompleteSubmitted+0x1f3
fffff880`02f2f310 fffff880`00e30dc4 : 00000000`00000002 fffff880`04bbcff7 00000000`00000000 fffff880`04bbcff7 : Wdf01000!FxIoTarget::RequestCompletionRoutine+0x1cb
fffff880`02f2f380 fffff800`02aab935 : 0d780da4`0da40dd4 fffff880`02f2f420 0d440d78`0d780da4 fffff880`04bbeb52 : Wdf01000!FxIoTarget::_RequestCompletionRoutine+0x3c
fffff880`02f2f3b0 fffff800`02ac3516 : fffffa80`027e8f2b 00000000`00000000 fffffa80`027fdc70 fffffa80`027e8b40 : nt!IopUnloadSafeCompletion+0x55
fffff880`02f2f3e0 fffff880`04b62323 : fffffa80`027e8b40 00000000`00000000 fffffa80`02655c10 00000000`00000000 : nt!IopfCompleteRequest+0x3a6
fffff880`02f2f4c0 fffff880`04ba24be : fffff880`02f2f590 fffffa80`027e8b40 00000000`00000000 fffffa80`0294f600 : bthport!BthCompleteRequestEx+0x5b
fffff880`02f2f4f0 fffff880`04b9c8d4 : 00000000`00000000 00000000`00000001 fffffa80`02a50c40 fffff880`02f2f6e0 : bthport!L2Cap_CompleteReadIrpList+0xc2
fffff880`02f2f540 fffff880`04b70732 : fffffa80`03349530 fffffa80`0294f5f0 fffff880`00410001 00000005`00000002 : bthport!L2CapInt_ProcessReadBip+0x430
fffff880`02f2f6d0 fffff880`04b70078 : fffffa80`0267f230 00000000`00000000 fffffa80`029b5402 fffffa80`02670000 : bthport!HCI_ProcessAclReadBip+0x642
fffff880`02f2f7a0 fffff880`04b988d9 : fffffa80`0267f230 fffffa80`03036702 fffffa80`026c0ab0 00000000`00000000 : bthport!HCI_ProcessAclRead+0x214
fffff880`02f2f810 fffff880`04b66201 : 00000000`00000000 00000000`00000000 00000000`00000056 fffffa80`026c0ab0 : bthport!HCI_ProcessMpBip+0x61
fffff880`02f2f880 fffff880`04b4d327 : fffffa80`0294f4f0 fffffa80`026c0ab0 00000000`00000000 fffff800`02ac59fa : bthport!BTHPORT_RecvMpBip+0x41
fffff880`02f2f8d0 fffff880`04b5399f : 00000000`00000000 fffffa80`00cd3910 fffff880`04b56388 fffffa80`00cda820 : BTHUSB!BthUsb_ReadTransferComplete+0xf7
fffff880`02f2f930 fffff880`04b53c31 : 00000000`00000003 fffff880`02f2f9f0 fffffa80`00ca2d00 fffffa80`00000012 : BTHUSB!UsbWrapWorkRoutine+0x17b
fffff880`02f2f9b0 fffff800`02ac3516 : fffffa80`00cd3bdb 00000000`00000000 00000000`00000000 00000000`00000000 : BTHUSB!UsbWrapInterruptReadComplete+0x1dd
fffff880`02f2fa40 fffff880`044135d9 : fffffa80`01e81050 fffffa80`00cda700 00000000`00000000 00000000`00000000 : nt!IopfCompleteRequest+0x3a6
fffff880`02f2fb20 fffff880`04413ab7 : fffffa80`028ef502 fffffa80`00cd3910 00000000`ffffffff fffffa80`01e81ea8 : USBPORT!USBPORTCoreiCompleteDoneTransfer+0xa15
fffff880`02f2fc00 fffff880`0441164f : fffffa80`01e81ea8 fffffa80`01e811a0 fffffa80`01e82040 00000000`00000000 : USBPORT!USBPORTCoreiIrpCsqCompleteDoneTransfer+0x3a7
fffff880`02f2fc60 fffff880`04402f89 : fffffa80`01e81050 00000000`00000000 fffffa80`01e81e02 fffffa80`01e81ea8 : USBPORT!USBPORTCore_UsbIocDpcWorker+0xf3
fffff880`02f2fca0 fffff800`02acc5dc : fffff880`02f07180 fffffa80`01e81ea8 fffffa80`01e81ec0 00000000`00000000 : USBPORT!USBPORTXdpcWorker+0x1d9
fffff880`02f2fcd0 fffff800`02ac96fa : fffff880`02f07180 fffff880`02f11f40 00000000`00000000 fffff880`04402db0 : nt!KiRetireDpcList+0x1bc
fffff880`02f2fd80 00000000`00000000 : fffff880`02f30000 fffff880`02f2a000 fffff880`02f2fd40 00000000`00000000 : nt!KiIdleLoop+0x5a
STACK_COMMAND: kb
FOLLOWUP_IP:
KeyMagic+2e5d
fffff880`04a02e5d ?? ???
SYMBOLSTACKINDEX: 4
SYMBOL_NAME: KeyMagic+2e5d
FOLLOWUP_NAME: MachineOwner
MODULE_NAME: KeyMagic
IMAGE_NAME: KeyMagic.sys
DEBUGFLR_IMAGETIMESTAMP: 49c160ec
FAILUREBUCKETID: X640xA_CODE_AV_BAD_IPKeyMagic+2e5d
BUCKET_ID: X640xA_CODE_AV_BAD_IPKeyMagic+2e5d
Followup: MachineOwner
---------

Blue Screen of Death - Need to reinstall Windows 7.

Similar Messages

Maybe you are looking for