Blue screen of death of hp desktop p6212f error 0x34

I was resetting my PC and had a power outage during recovery (with a surge protector hookup).
It says problem detected and shut down windows to protect pc. Cache_manager
Error 0x34
HPs excellent customer support said it would be fixed if I purchase a recovery disk after a long time of harassing warranty offer. So I purchased recovery disk. It did not work. The blue screen of death says to possibly disable caching and shadowing in advanced mode through f8. I can not enter my profile. Each startup goes to blue screen. How do I disable caching or shadowing memory option. Is there any other option that doesn't consist of being taxed by HP which upsetting. I going for my bachors in IT, however, this one has me stumped. Please help.
Stop error 0x34

Not sure if this will actually help:
http://answers.microsoft.com/en-us/windows/forum/windows_7-system/windows-7-random-blue-screen-error...
If you can not install from recovery disks, I would start to think about hardware problems. Get the hard disk manufacturer's drive certification iso image and make a boot disk and test the hard drive and use the disk to fully erase the drive before another attempted install. Use memtest86 over night to test the memory. Make sure all your fans are spinning and especially check the one on the video card and CPU. Check the video card and mother board for bulging, rounded or leaking capacitors.
Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may click on the white star in the "Kudos" button for any helpful post to give that person a quick thanks. These feedback tools help keep our community active, so you receive better answers faster.

Similar Messages

Blue screen of death with HDD Hardware Test error on iMac HELP!!

My iMac is not starting up. It just get the blue screen of death during startup. It is a 2.66 mghz duo with 2gb 800 ram. I was able to get the Hardware test to run and got an error of 4M0T/2/40000004: HDD-1560. I am assuming it is an error with the internal hard drive since I have nothing else hooked up to the mac other than the keyboard and mouse right now. Does this code mean my hard drive is completely shot? Any help would be appreciated.

4M0T/2/40000004: HDD-1560.
Either failing or failed
You can have Apple replace the drive at a nearby Apple store or an Apple certified repair shop.
Apple - Support - Check Your Service and Support Coverage

Model m8530f, no recent changes, blue screen of death. Diagnostic tools gives error code BIOME-1 .

Model m8530f, no changes in weeks, blue screen of death while away. Diagnostic tools gives error code BIOME-1 .

Asamd1st, it appears that this is a memory error. I suggest removing the memory and reinstalling them one at a time. Then, boot to see if the computer runs properly. Do this with each stick.
Please click "Accept as Solution" if your problem is solved.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Blue screen of death with windows seven

Ok to begin, I understand that Im using a release candidate operating system but I would appreciate any help.
When I'm watching a slow I get a blue screen of death. With the fallowing error details:
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7100.2.0.0.256.1
Locale ID: 1033
Additional information about the problem:
BCCode: 124
BCP1: 00000000
BCP2: 8556301C
BCP3: B6602000
BCP4: 05000135
OS Version: 6_1_7100
Service Pack: 0_0
I did not have this trouble when I was using windows Vista.
My pc specs are:
9600 Phenom BE
9600 Nvidia GT
Gigabyte motherboard
Please let me know if you can help.

princezuda wrote:
I read the info you wrote and it said version 6.1.7400 if it is windows 7 shouldn't it be version 7?
Windows 7 really is version 6.1 (Vista was 6.0).
Same as Windows XP was version 5.1 (Windows 2000 was 5.0).

ITunes and the blue screen of death.

Over about the past week now iTunes has been giving me this error when I try to disconnect/eject my iPod from with in iTunes.
+"The iPod cannot be ejected because it contains files that are in use by another application."+
It also will not allow me to eject it from the Safely Remove Hardware function on the task bar.
When I then try to close down iTunes it gives me the blue screen of death. I have the error code which corresponds with it, and the code is one which mentions Removable Media Devices as the reason for the error.
I've read a bit about this, and tried a few things. But to no avail.
I'm going to move all the files off of my iPod and reset the iPod itself when I get home.
Short of that, is there anything else which may fix this problem?
Thank You

One thing to check is if you have any new or previously updated anti virus software.
It could be trying to scan the ipod while itunes is trying to sync to it.

Freeze Blue screen of death Now just boots to CMOS

Hi, a short while ago my laptop froze and I could not do anything other than turn it off.
When I turned it on again it just sat on the MSI logo. After a while I got the blue screen of death. It gave an error code but I was away home home with no way on noting it. It suggested putting the CD I got with the laptop in to run a recovery programme.
Upon getting home I tried this (with the only CD I had) but it did nothing. The laptop just continuously boots to the CMOS. I set the CD drive as the primary boot but that changed nothing.
On booting there is a flash of two small screens of text but it it far to fast to read, before the CMOS loads.
I'm assuming there has been a hardware failure (hard drive?).
Has anyone any ideas on what I should do now?
Cheers.

Since you have a Windows bootable CD, I would suggest you trying BIOS update. Boot from your Windows CD and access command prompt. Run winflash tool to update your system BIOS. The command you need is afuwinx64.exe XXX.XXX /p /b /n /r (Replace XXX.XXX with your BIOS file)
http://www.mediafire.com/download/akkafcau8jdzg4l/Winflash.zip

Kt6 Delta Blue Screen of Death

Ok here goes. I have the KT6Delta with raid. When I go to install the operating system I get past where it says insert drivers for the raid. Then after a minute or so of loading stuff I get the Blue Screen of Death from Microsoft. The error is as follows
SESSION3_INITIALIZATION_FAILED
The technical information is this
0x0000006f (0xc00000,0x00000000,0x00000000,0x00000000)
From there all I can do is reboot and end up at the exact same place
Computer specs.
Amd 2800xp 333fsb
msi kt6 delta mainboard
mis dvd-rom drive
msi cd-rw drive
floppy drive
2 seagate 80gb SATA drives
crucial 512mb pc3200 ddr ram
400w power supply
msi 64mb agp graphics card.
any and all help would be of much value and greately appreciated. Thanks...

I've got to this amazing Mobo, but i wan't to change my memory.
What memory do you recomend me for this mobo (kt6-delta-lsr)
Can you tell me what is best:
- Corsair CMX512-3200C2 (low latency)
(what is the difference between them?)
- Corsair CMX512-3200LL (high bus speed)
- Corsair twinX with dual channel (i know that this mobo doesen't support or don't need memory dual channel but i don't know with what memory i could get the best performance
- kingston HyperX
If you can please tell me wich brand of memory you think is best and why
Pd: i need this memory for gaming and 3d max rendering
hope you can help me to choose my new memory.
Thx

Blue screen of death desktop widows 7 Bit help!!!

Hello so like a week ago on Monday I got home from school got on the PC and I started playing BF3 and I was lagging a bit so I just did a reboot and when it started up it like came out of the blue and it came up with a blue screen of Death I haven't installed anything that I can remember the last thing I installed was Norten 360 version 6.0 so later on that week I found out from my friend that you can get a BSOD from having your wires unplugged or dust in the PC so I took everything out and cleaned it and put it back in and double checked it and it looked fine and still BSOD and when I start it up its BSOD same for normal mode all safe modes debugging mode I basically did all the f8 options and f12 and all the other f keys and still BSOD so before I got to my local best buy store for help I just came online for help first below is the blue screen of death that I get so help if you can and thanks for your time! BSOD = blue screen of death
A problem has been detected and Windows has been shut down to prevent damage to your computer.
PROCESS1_INITIALIZATION_FAILED
If this is your first time you've seen this stop error screen,
restart your computer. If this screen appears again follow
these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any Windows updates you might need.
If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select advanced startup options, and then
select Safe mode.
Technical information:
*** STOP: 0x0000006B (0x0000000000000000, 0x0000000000000000, 0x0000000000000000, 0x0000000000000000)
ill look back later on today or tomorrow around 5Pm eastern time.

I would just like to follow up on deusexmachina's solution and explain how to delete that file without booting from the drive.
Boot from a Windows 7 disc/USB and after it loads press SHIFT+F10 to bring up the command line. From here, you can navigate to the "C:\Windows\System32\codeintegrity\" directory and delete the "bootcat.cache" file and reboot.
If you do not have Windows 7 bootable media to boot from then you can download the ISO from here and burn to a disc or use a USB drive:
http://www.mydigitallife.info/official-windows-7-sp1-iso-from-digital-river/
Another option would be to pull the physical drive from the computer and access it using another desktop or laptop to manually delete the "bootcat.cache" file as well.
Afterwards, please upgrade to Service Pack 1, so this issue cannot repeat itself.

Desktop Software causes blue screen of death upon sync attempt

I've had this problem off and on (mostly on) since upgrade to version 6.0 bundle 2647 of the desktop software. The desktop software starts up normally. Upon connecting the device (Torch 9800) one of the following occurs:
1. The screen on the device flashes with the connection graphic, then computer goes BSOD.
2. The device is recognized, asks for my password in DTS, put in password, looks as if synch process is about to start, then computer goes BSOD.
3. The device is recognized, password entered, sync proceeds normally.
I get the BSOD about 75% of the time, which means I'm scared to sync very often ... which is a huge problem. When I do attempt to sync, I've learned the hard way to save all data, shut down all programs, and cross my fingers.
My computer is HP TouchSmart tx2, AMD Turion X2, running Vista - 64. I have no problems with any other applications.
I've looked on other forums, tried checking for upgrades, patches, etc. After being a loyal BB proponent since the early days, I'm about ready to leave the reservation. I can't tolerate having RIM products jacking up my computer (which I use to make a living).
If anybody can help me out, point me in the right direction, I certainly appreciate it.
Thanks!

Any option just produces the message again for approx. 3 tries then my entire system goes to Blue Screen of Death and starts dumping memory.
Just in case you're still around, bubba ...
What text and numerical codes are you getting on the blue screen? If it's mentioning a specific filename too, let us know what that is too.
For example:
STOP 0x00000023 (0x000f00b5, 0xfc4af978, 0xfc4af7b4, 0xfeff4a6b)
FATFILESYSTEM
fastfat.sys

Blue Screen of Death -- Datebook gone, Addressbook in danger

Having some major addressbook/datebook issues with HotSync. I am using a Handspring Visor (the original, old model), Palm Desktop 4.0.1, Windows XP Home. I have not updated any of the hardware/software lately.
A couple days ago, when I synced my Handspring Visor, I got the dreaded "blue screen of death." I rebooted my computer, and then found that the Palm Desktop program wouldn't load. It gave me an error saying the addressbook database could not be opened. The sync log also gave me a series of messages like this:
"Some handheld records were not copied to your PC. Your computer may be full or you may have reached the maximum allowed records on the desktop. To correct this situation, delete some records and perform a HotSync operation again." (Below, I've pasted in the full log from the last couple days so you can see exactly what I mean.)
This morning, I synced the device again, thinking that perhaps the addressbook file had become corrupted and that a sync would clear things up. The answer was ... anything but!
I was able to get the Palm Desktop software to reopen by renaming "addresss.dat" to "address.dba." However, two major problems:
1) The addressbook on my computer is totally blank. There are three files in the "Address" folder with these extensions: .aba, .dat, and .bak. All of them are only 1 or 2 KB in size. However, this isn't a total loss because my addresses seem to be intact on my handheld.
2) My datebook has lost ALL data I've entered since roughly January 2008. All my previous years of calendar entries seem to be unaffected. This is the scary part because my handheld AND my desktop both have this problem. I tried the solution of renaming the datebook.bak file to datebook.dba (and giving the current file a .old suffix), but that did not fix the problem. Both files are 355 KB in size. I've also tried setting up a new users and copying over both these files one at a time, but that didn't fix the problem either.
Sadly, I was a fool and didn't backup my Palm files after the blue screen of death the other day; I didn't do it until AFTER that second sync this morning where my datebook data got lost.
Basically, I'm pretty sure I'm screwed about the datebook files. However, I would like to make sure my addressbook doesn't get erased from my handheld. Before my next sync, I feel like I should set the HotSync conduit prefs for addressbook to "Handheld Overwrites Desktop," but I thought I'd get some feedback from y'all before I did that. I am also really curious why I'd lose SOME of my calendar data but not ALL of it? That's the weirdest part to me.
Many thanks for any help you could provide.
HOTSYNC LOG
HotSync operation started 08/22/08 07:30:08
-- Date Book
   - Some handheld records were not copied to your PC. Your computer may be full or you may have reached the maximum allowed records on the desktop. To correct this situation, delete some records and perform a HotSync operation again.
     Desktop = 2343, Handheld = 2342
OK Date Book with 1 message(s)
-- Address Book
   - Some handheld records were not copied to your PC. Your computer may be full or you may have reached the maximum allowed records on the desktop. To correct this situation, delete some records and perform a HotSync operation again.
     Desktop = 0, Handheld = 481
Address Book synchronization failed
-- To Do List
   - Handheld category 'Business' has been deleted.
   - Handheld category 'Personal' has been deleted.
   - Some handheld records were not copied to the Palm Desktop. Attempting to restore from the handheld.
     Desktop = 1, Handheld =   14
OK To Do List with 3 message(s)
-- Memo Pad
   - Handheld category 'Business' has been deleted.
   - Handheld category 'Personal' has been deleted.
   - Some handheld records were not copied to the Palm Desktop. Attempting to restore from the handheld.
     Desktop = 0, Handheld =   18
OK Memo Pad with 3 message(s)
OK Expense
   -- Backing up db Saved Preferences to file C:\Program Files\Handspring\PollocC\Backup\Saved_Preferences.PRC
OK System
HotSync operation complete 08/22/08 07:32:24
HotSync operation started 08/20/08 08:15:59
OK Date Book
-- Address Book
   - Some handheld records were not copied to your PC. Your computer may be full or you may have reached the maximum allowed records on the desktop. To correct this situation, delete some records and perform a HotSync operation again.
     Desktop = 0, Handheld = 481
Address Book synchronization failed
-- To Do List
   - Some handheld records were not copied to your PC. Your computer may be full or you may have reached the maximum allowed records on the desktop. To correct this situation, delete some records and perform a HotSync operation again.
     Desktop = 0, Handheld =   15
To Do List synchronization failed
-- Memo Pad
   - Some handheld records were not copied to your PC. Your computer may be full or you may have reached the maximum allowed records on the desktop. To correct this situation, delete some records and perform a HotSync operation again.
     Desktop = 0, Handheld =   18
Memo Pad synchronization failed
OK Expense
   -- Backing up db Saved Preferences to file C:\Program Files\Handspring\PollocC\Backup\Saved_Preferences.PRC
OK System
HotSync operation complete 08/20/08 08:16:15
HotSync operation started 08/15/08 08:21:23
OK Date Book
OK Address Book
OK To Do List
OK Memo Pad
OK Expense
OK System
HotSync operation complete 08/15/08 08:21:26
Post relates to: Visor Neo

When you sync the device to Palm desktop a file is created on the first sync with the extension .dat. When you sync the second time the data in the .dat file is copied to the .bak file. The process is cycled in that order. Each time you sync, the files are overwritten. If you sync once and notice the data is gone, don't sync again because the .bak file should have the recoverable data.
When you rename the files to recover your data you need to rename the files in the following order.
Close Palm Desktop, rename the .dat to .old. Next rename the .bak file to .dat. Reopen palm desktop and see if the data is there.
Try this and see if you can recover the data.
Here is a method for saving your data in a seperate location in case you lose data again.
The best way to preserve your data is to export the data in each category in Palm Desktop to a seperate folder on your PC.
Create a new folder on your PC somewhere that is convenient. Name it something like Palm Desktop Data. CLick on the link below and follow the instructions on that page for the export procedure.
http://www.palm.com/cgi-bin/cso_kbURL.cgi?ID=28734
With the data saved in the folder you created, make a copy of that folder and save to a flash drive, cd-rw or external hard drive. Anytime you make a change in Palm Desktop, export the data that was changed to that folder and save again to the external media.
With this process you can always import the data back into Palm Desktop anytime you have a problem with the data in Palm Desktop or if your computer/hard drive/device crashes.
Post relates to: Palm i705
Message Edited by cygnusX1 on 08-22-2008 09:16 AM

Blue Screen Of Death When Syncing Ipod

Hey so if anyone can help me i will love you so much,
So I have a 20GB fourth generation ipod (old i know) but it works fine, and i have an new HP laptop that i got for christmas and like for a good 2 months everything was fine with itunes and then one time it told me i needed to restore my ipod to factory settings and i was like oh this is annoying but whatever ive done it before so i just did it, but the next time i tried syncing my ipod the BLUE SCREEN OF DEATH came up and that scared me but i thought maybe it was just a one time thing...turns out it wasnt and now every time i try to sync my ipod the blue screen comes up and i have to restart my computer. my itunes otherwise works fine i listen to music on it and add music to itunes perfectly fine just the syncing doesnt work. I also thought maybe it could be my ipod because it is old so i went down to my desktop which has XP and and older version of itunes but it worked completly fine. SOOOOOOOOOOO i have no idea what to do. i dont know tons about computers but im not ******** and can most likely follow directions so if anyone could help me it would be much apreciated because i can not take listening to the god awful radio in the car much longer.

Have you tried System Restore to go back to before the problem started?
If that fixes the Blue Screen Of Death issue, then you can try and track down the changes from then to when the problem started.
Good Luck.

Updating AVI Video Drivers results in blue screen of death

Creating a CD in Premiere 9 resulted in the program closing. I was told to update video and sound drivers. First I used the option in Device Manager, then I used DriverUpdate. The computer now frequently gets the "blue screen of death," with reference to an infinite loop because of ATI2DVAG. I want to download the drivers myself after deleting the current drivers. The first field on the ATI site gives me the choice of desktop graphics, notebook graphics, TV tuner graphics, workstation graphics, integrated motherboard, embedded and MAC. I chose DESKTOP. I have Windows XP Professional and I also have Linux installed; my video card is ATI Radeon HD 4250.
In the second field I chose Radeon HD Series. In the third field I chose Radeon HD 4xxx Series PCle. In the fifth field I chose XP 32.
This brings me to a page which has three tabs: Catalyst Software Suite (with one download), Individual Downloads (five downloads) and Optional Downloads (five downloads). I think the first is the one I want. It comes with the warning that Framework 1.1 Service Pack from Microsoft, dated August 30, 2004, must be installed. I have no reason to believe that my service packs are not up-to-date; I have service pack 3.
The Catalyst Software Suite, with the one download, is 11.6. I think I now have 11.2 (I found this in the Catalyst Control Center from the icon on the bottom of my screen). In my Device Manager it says: 8.821.0.0 released January 26, 2011, PCl busl, device5, function 0, internal version 8.821.
It looks as if the program I bought, DriverUpdate, did not install the latest release. I think my best bet is to delete the current driver and install the Catalyst
Software Suite 11.6. Is this the right thing to do?

I agree with John that those driver updater programs can cause more problems than they fix. I gave up on them a long time ago.
But if one of them were giving me the blue screen of death, I'd be very concerned! Blue screens, even on Windows computers, have rarely been seen since the days of Windows ME.
Rather, you'd be best to just manually go to Windows Update and ensure you have even the non-critical updates. That fixes about 99% of your computer. Though occasionally I go to the ATI or nVidia sites manually and get the latest drivers for my video card. And of course I go to Apple.com to ensure I have the latest version of Quicktime, which plays an important role in all PC-based computer editing.
Beyond that, I'd run iobit's excellent, free PC tune-up tool Advanced System Care. It's one of the few tune-up programs I do trust -- and it tunes up everything with just a click or two.
http://www.iobit.com/advancedsystemcareper.html
And if you're STILL having problems, please give us more information about your system and your project.
What operating system are you running? How fast is your processor and how much free, defragmented space is on your C drive?
What kind of camcorder is your video coming from? When you started your Premiere Elements project, which settings did you select?

IPod Touch connection causes blue screen of death.

I am using a Dell DHS desktop computer running Windows XP. I want to restore my 2ng generation iPod Touch from a back up in iTunes (9.0.2). I plugged the iPod in and started the restore but about a quarter way through, after the iPod disconnects and reconnects, I got a blue screen of death.
I have no idea why this is happening. Does anybody have a similar problem or, even better, a solution to this?

Hello Sam,
And welcome to Apple Discussions!
Have you had a chance to look at this Apple support document related to this issue? If not, I would start here.
http://support.apple.com/kb/TS1502
B-rock

Blue Screen of Death when calling skype on iphone/...

Every time i call a person on skype on iphone or s6 (i think any smartphone) my computer crashes and causes blue screen of death. i have windows 8.1 running and this also happened on win 8. i have tried uninstalling, clean installing, deleting all old files of skype and then installing but nothing has worked.
on aside, when i get a call from another desktop skype as well, invariably, i cant connect the call at first attempt. clicking on accept does nothing and it will continue rining. even clicking on reject does not work after. the only option is to kill skype from task manager and then restart it. it then works fine for first call i make. it then has similar issue on later calls. not neccessarily the 2nd call. its regular but also random in nature.
i have not idea what is the problem. do you?
skype version 7.5.0.102
here is the summary of BSoD last night
Fault bucket AV_rtsuvc!Unknown_Function, type 0
Event Name: BlueScreen
Response: http://wer.microsoft.com/responses/resredir.aspx?sid=10&Bucket=AV_rtsuvc!Unknown_Function&State=1&ID...
Cab Id: 820ea6ec-6de2-4d12-bd98-0fdae73a883d
Problem signature:
P1: 50
P2: ffffe000ef655ff8
P3: 0
P4: fffff800e54fc0c0
P5: 0
P6: 6_3_9600
P7: 0_0
P8: 768_1
P9:
P10:
Attached files:
C:\Windows\Minidump\061315-85671-01.dmp
C:\Users\Madhvendra\AppData\Local\Temp\WER-220125-0.sysdata.xml
C:\Windows\MEMORY.DMP
C:\Users\Madhvendra\AppData\Local\Temp\WER2DD3.tmp.WERInternalMetadata.xml
These files may be available here:
C:\ProgramData\Microsoft\Windows\WER\ReportArchive\Kernel_50_a9ac997f524f3a2a4a3ec8b634fedacf174d_00000000_cab_15346984
Analysis symbol:
Rechecking for solution: 0
Report Id: 061315-85671-01
Report Status: 0
Attachments:
BSoD 14 June 15.zip ‏10 KB

Your Realtek camera drivers are crashing. Make sure you have the latest drivers installed for your video card and camera. If the problem continues to occur update the camera drivers to the generic Microsoft camera drivers that come with the OS. Steps on how to update to those drivers are covered in the below graphic:

Blue Screen Of Death When Unplugging iPhone 4s(7.0.6)/iPod touch 5th Gen (7.0.4) !!

Now heres a problem i have been facing everytime i try an unplug iphone 4s/ipod touch 5...
and heres what i have tried out after searching the net and this forum
1) tried different usb ports
2) tried different cables all genuine apple products if someone has a reason/solution telling me to use genuine apple product
3) uninstalled drivers but not itunes
4) complete uninstalled itunes (full uninstalllation i mean deleting all files n folders from c drive after uninstalling)
now heres the catch !!
when i uninstall drivers and itunes and try connecting iphone/ipod ,drivers are automatically installed and i guess they are mtp or apple iphone/ipod drivers or whatever.. no when i download latest itunes and install it and connect device all works well... but wghen disconnect device BOOM blue screen of death !!
so i guess itunes is the problem !!! tried the whole thing repeatedly same result
itunes= blue screen of death !!!
hope someone can help me out here !! details of desktop and itunes given below and windows 7 crash report also can give link of dump files if required cause cant attach it here !!
desktop:- windows 7 ultimate 32bits
itunes:- latest itunes 11.1.5.5
after reboot alert:-
Problem signature:
Problem Event Name:    BlueScreen
OS Version:    6.1.7601.2.1.0.256.1
Locale ID:    1033
Additional information about the problem:
BCCode:    1000007e
BCP1:    C0000005
BCP2:    00041CE6
BCP3:    8E993A74
BCP4:    8E993650
OS Version:    6_1_7601
Service Pack:    1_0
Product:    256_1
help/solutions/links apperciated !! thanks in advance !!

Create an ISO (Encore) or folder on your hard drive (Encore or Premiere Elements) and then use the FREE http://www.imgburn.com/index.php?act=download to write files or folders or ISO to disc for DVD or BluRay (send the author a PayPal donation if you like his program)
Imgburn will read the ACTUAL disc brand from the disc, which is not always the same as the box label (Memorex is notorious for buying "anything" and putting it inside a Memorex box)
When you write to disc with Imgburn, use the SLOWEST possible speed setting, so your burner has the best chance to create "good, well formed" laser burn holes... since no player is required to read a burned disc, having a "good" one from a high quality blank will help

Blue screen of death of hp desktop p6212f error 0x34

Similar Messages

Maybe you are looking for