Blue screen of death - was fine until I updated windows :(

Alienware i7-3720qm 2.60ghz
16gb ram
Windows 7 Home Premium 64 Bit
Service Pack 1
It kind of happens randomly. I could be working a good few days and then BSOD. It's really sad, but hoping to address the issue with you fine folks. It barely started doing this right after the updates. Here is what results I came up with after the BSOD
forced the reboot.
I would love to address this because it's my gaming computer :( Thank you for your help,
Kind regards,
Matt
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7601.2.1.0.768.3
Locale ID: 1033
Additional information about the problem:
BCCode: d1
BCP1: FFFFFA8013824001
BCP2: 0000000000000002
BCP3: 0000000000000000
BCP4: FFFFF8800441D93A
OS Version: 6_1_7601
Service Pack: 1_0
Product: 768_1
Files that help describe the problem:
C:\Windows\Minidump\012915-14040-01.dmp
C:\Users\Matt\AppData\Local\Temp\WER-15802-0.sysdata.xml
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

It may help to look at the minidump files from the blue screen crashes with a debugger.
Can you zip up the minidump files in the C:\Windows\Minidump folder and make available (provide link) via a public folder on OneDrive or similar site?
Here's a couple of links on using OneDrive (SkyDrive):
http://windows.microsoft.com/en-ca/skydrive/add-photos-files-faq
http://windows.microsoft.com/en-ca/onedrive/share-file-folder
If you have problems zipping the minidump files copy the minidump files to another location such as a folder on the Desktop
Also, you do not necessarily have to zip up the minidump files, you can upload them one at a time

Similar Messages

How to I increase the space between the top of tabs and the frame of the entire window? It was fine until Firefox updated

Hello,
How to I increase the space between the top of tabs and the frame of the entire window? It was fine until Firefox updated and since it updated it reduced the space. Now the space is too thin which makes it more difficult to move the open window frame around when I need to grab something from Desktop. Image attached.

In the image, see how thin the space is right above the tab? It was much wider before Firefox update so if any know how to make it wider again, please let me know. Thank you
''troyable7 [[#question-1058550|said]]''
<blockquote>
Hello,
How to I increase the space between the top of tabs and the frame of the entire window? It was fine until Firefox updated and since it updated it reduced the space. Now the space is too thin which makes it more difficult to move the open window frame around when I need to grab something from Desktop. Image attached.
</blockquote>
In the image, see how thin the space is right above the tab? It was much wider before Firefox update so if any know how to make it wider again, please let me know. Thank you

Blue Screen of Death from Apple Wireless Keyboard in Windows 7

Hi all,
Situation: I have Windows 7 Professional 64 bit installed (boot camp) on my late 2008 MBP. Oftentimes, I'm plugged in to an LED Cinema display and work off of the Apple Wireless Keyboard & Magic Mouse. The Boot Camp partition / Drivers were originally installed from a Snow Leopard DVD. My Apple Software update reports that all my Apple Windows Software is up-to-date.
Problem: Since installing Windows 7 back in May, I've experienced the Blue Screen of Death (BSOD) 5 times. Each time has resulted from a key press on my bluetooth keyboard after it had been sitting idle for some time and presumably gone into power save mode. Any key press causes an instantaneous BSOD. It only occurs when I'm running windows and I'm working off my bluetooth keyboard so it's hard to replicate and likewise hard to troubleshoot and determine if a fix has worked.
*Error Details:* Here's some information I've extracted from the BSOD dump files.
IRQLNOT_LESS_OREQUAL
+The problem seems to be caused by the following file: ntoskrnl.exe+
+Technical Information:+
+* STOP: 0x0000000a (0xfffff80003032f00, 0x0000000000000002, 0x0000000000000008,+
0xfffff80003032f00)
+* ntoskrnl.exe - Address 0xfffff80002cbf600 base at 0xfffff80002c4f000 DateStamp+
0x4b88cfeb
Thanks for the help!
Paul

I'm experiencing the same problem with the BSODs while using my Apple wireless keyboard (latest model).
I'm running Windows 7 x64 and admit that I bypassed the BootCamp software/driver installation wizard after it complained that my model didn't support installation of the x64 drivers. Its a bit of a gray area, as my system is 64-bit capable and many services and applications run in 64-bit mode without my intervention.
Just curious if Windows 7 x86 users are experiencing these BSODs or is it a coincidence that you all are installing the drivers creatively.

Blue screen of death after installing Boot Camp on Windows 7

Hello and thanks for the help!
Brnad new user to Boot Camp here. After a new install of Windows 7, I install Boot Camp but then when rebooting Windows I get the blue screen of death. When letting Windows attempt a repair, it fails and I am forced to Recover Windows 7 to a state before I installed Boot Camp.
Help!?

Solution for this problem is simple. You have to apply Mac Book Air SMC Update 1.7 which you can do from Mac OS X with Software Update or you can download required update manually from Apple support site. If you don't use BootCamp and have installed Windows without it, you will have to boot Mac OS X from external drive just to apply required update. After you applied SMC update, you can boot to Windows and apply BootCamp update 3.2 and 3.3.
There is a known problem with Mac Book Air EFI Update 2.3, which you won't be able to apply and it will show in Software Update every time you check for updates. There is no solution for it yet.
You get BSOD if you have BootCamp 3.1 and Windows 7 SP1 installed and you have commited Windows update which will break applemtp.sys as your SMC firmware is too old. It applies to Windows 7 32 bit and 64 bit versions in BootCamp or native install.

Blue Screen of Death on install of j2re-1_4_2_04-windows-i586-p.exe

Immediately upon installing j2re-1_4_2_04-windows-i586-p.exe, I get the "blue screen of death" on Windows 2000, indicating memory dump. Applications do not work subsequently that use j2re. Attempts to modify in reinstallation indicate errors in Windows installer. Don't know what to do.

Immediately upon installing
j2re-1_4_2_04-windows-i586-p.exe, I get the "blue
screen of death" on Windows 2000This is the usual symptom of a video driver problem.
Make sure you have all the latest service packs for Win2K installed, and for good measure, visit your graphics card vendor's site and get the latest drivers from there.

The keybord of my Ipod 5th was fine until I update to ios 7, now i can not use the keyboard because it took like 15seconds to the letters to appear

They keyboard of my Ipod 5th was exellent until I update to ios7, now i cannot use the keyboard because it took like 15 seconds to the letters to appear

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

Plug-In not working on any browser, Latest Flash is installed properly,all was fine until i updated

Hi guys, all was working fine until yesterday when i updated flash to the newest version, im sad because i can't open any video on youtube, i tried with safari, firefox and chrome, no one seems to work fine. Please if you can help me i will be very happy.
I tried uninstalling and reinstaling but the result always is the same.. i can't enjoy internet as in the past because i can't open ANYTHING, this is not funny
Please help!!
imac 3.06 Ghz Intel Core 2 Duo
4GB Ram
OSX Mountain Lion 10.8.4
Ivan.

Download the offline installer here: http://fpdownload.macromedia.com/get/flashplayer/current/licensing/mac/install_flash_playe r_11_osx.dmg
If it won't download directly, right click and "Save as"
Go to: Mac HD/Library/Internet Plugins
Trash the Flash Player.plugin file from there
Go to: Mac HD/Library/Application Support/Adobe
Trash the Flash Player folder (the whole folder)
Empty the trash
Reboot
Mount the DMG and run the installer.
BEFORE opening any Flash content in Safari, open Safari>Preferences, and check the Security tab to make sure "Allow all other plugins" is checked.

TS1398 my iphone 4s lets me connect to my home wi-fi but then i get disconnected. my phone was fine until i updated the software to iOS 6.1.3 version

i ahve a iphone 4S and was working fine until the last software upgrade. i connect to my home wi-fi and it works fine for awhile then it disconnects me. never had this problem until that last software upgrade

Hi Precious.eyez,
I understand that you are having Wi-Fi connectivity issues. We have a great resource for troubleshooting these type of issues:
iOS: Troubleshooting Wi-Fi networks and connections
http://support.apple.com/kb/TS1398
Try moving closer to the Wi-Fi router or base station to see if the Wi-Fi signal improves.
Check for sources of potential interference.
Remove your iOS device from any case, stand, or other attachment to see if the Wi-Fi signal improves.
Open Safari and try to load a webpage to see if the Wi-Fi signal improves.
Alternatively, you may want to make sure your network does not have a common name:
Avoid giving your wireless network a common name (SSID)
http://support.apple.com/kb/HT4450
Thanks,
Matt M.

Blue Screen of Death when installing latest patches for Windows 7

I get a BSOD when I installed the latest windows patches. the actual error message skips between a General protection Fault and the following:
DRIVER_UNLOADED_WITHOUT_CANCELLING_PENDING_OPERATIONS.
It is involving the file applemtp.sys at stop 0X000000CE
I am unable to recover from it including a "safe mode" and a revert to previously known configuration.
Any ideas would be greatly appreciated.

Solution for this problem is simple. You have to apply Mac Book Air SMC Update 1.7 which you can do from Mac OS X with Software Update or you can download required update manually from Apple support site. If you don't use BootCamp and have installed Windows without it, you will have to boot Mac OS X from external drive just to apply required update. After you applied SMC update, you can boot to Windows and apply BootCamp update 3.2 and 3.3.
There is a known problem with Mac Book Air EFI Update 2.3, which you won't be able to apply and it will show in Software Update every time you check for updates. There is no solution for it yet.
You get BSOD if you have BootCamp 3.1 and Windows 7 SP1 installed and you have commited Windows update which will break applemtp.sys as your SMC firmware is too old. It applies to Windows 7 32 bit and 64 bit versions in BootCamp or native install.

HT201263 My phone was fine until I updated itunes

Now my phone is stuck in recovery mode after an update. I get unknown error 1403 after itunes tries to restore the phone for more than 10 minutes. Any way to fix? The help article for error 1403 just tells me to connect to itunes. Connecting to itunes tells me to restore, when I hit the restore button, it updates for a loooooong time then says "unable to restore, unknown error (1403).

A few of the suggestions that I found on this forum and other forums as well. Try them one by one in order.
1) Make sure your iTunes is updated. Verify by checking it manually.
2) Reboot your computer and iPhone and change U.S.B. port.
3) Turn OFF the firewall and anti-virus on your computer. Also turn OFF the firewall on your router (if you are connected to the Internet through a wifi router). [Check the posting of andrea manuel on 2nd page here: https://discussions.apple.com/thread/3406391?start=15&tstart=0]
4) As a last resort, place your iPhone in to DFU mode and then restore. Search in Google "force iPhone in to DFU mode" and follow the instructions precisely.

I recentlybought a new tower with windows 8.1 everything was fine until yesterday when i went to watch a vidie someone had posted and the sound was there but the screen wasall green, now i got to the point where the video is there but it won't load up and

I recently bought a new tower with windows 8.1 everything was fine until yesterday when I went to watch a video that someone had posted, the sound was there but the screen was all green everything I try to watch has a green screen, I have gotten rid of the green screen but now the video won't load to watch. it tells me I have to upgrade flash player but my computer tells me its already embedded or something like that in windows 8.1. can you help.@marks93255255 or [email protected]!

If other devices can connect to the network without problems, it means that the router can provide wireless internet. For this situation, an isolation process is needed to be able to find a fix.
Was the computer tested to connect through Wi-Fi before you bought it?
Did you do Mac address filter on your router?
Make sure that the router is using WPA/WPA2 or WPA2 encryption type just like what Chester has recommended. If your router is already set to that security type, you may test by disabling the wireless security of the WI-Fi router. Check if it will connect or not.
Another thing to check is the properties of your wireless connection. To do that, Go to Network and Sharing center > Click change adapter settings > right click “Wireless” > go to Properties> click Internet protocol IPV4> check the Properties button below > make sure that it’s set to both Obtain IP automatically and Obtain DNS server automatically.
Feel free to update here so everybody in the community can help.

Blue Screen of death - now can't load Windows (even in safe mode)

Last night laptop (Satellite L500 19Z; Win 7 64 bit) crashed whilst playing CIV4. Got a blue screen of death; before I had chance to read any of the error messages on it the machine rebooted.
It loaded windows in safe mode fine then, and informed me as it had loaded safe mode OK the problem will be related to some recently installed software and I should uninstall programs I'd installed until it would load normally. As it was late last night I shut down and thought I'd sort it in the morning (in retrospect this may have been a mistake ....).
Today, when the machine tries to boot up it attempts a Startup Repair; unfortunately this fails every time and it says "Startup repair has tried several times but still cannot detemine the cause of the problem"
I looked at the log it produces but it passes all the individual tests.
I also can't access the advanced options for system recovery & support, which appears on the Startup Repair dialog box as it demands I be logged in, which apparently I'm not (presumably as the machine never got to the windows login screen before trying the startup repair). The error message reads "you must be logged in to access system recovery options. If you are having trouble logging in please contact your computer administrator for assistance. please click OK to restart the computer."
I've had a go at booting into the various advanced options (safe mode, safe mode with command prompt etc. but the outcome is the same).
I also tried the Repair your Computer option from the advanced boot options screen, but after the screen where it asks you to choose the language and keyboard, I get the same login error mentioned above.
Is there a way to repair or even run the hard disk based windows recovery (haven't got the recovery DVD with me as I'm away from home for a couple weeks) without logging into windows? I would have expected there to be but have yet to figure out how to do it.
(there are no disks in the disk drive, no other devices attached to the laptop - I've tried it with mains power and with the battery and have not noticed any differences)
Thanks
James

Normaly the reinstall data is on a separate part on your HD, not in Windows.
The register is only used for Windows.
If it doesn't work you can always try to reinstall from a DVD later.
It does mean all your data on C:\ will be gone. If you can hook your HD on an other PC you can try to safe your work with a recover prog.

Windows 7 Crashes (Blue Screen Of Death) As Soon As My iPhone4 Connects

Ok, so I have Windows 7 with the latest version of iTunes and the latest software version for my iPhone4, everything was working fine until just the other day, whenever I plug my iPhone into my computer, as soon as it makes that little noise when it connects, I get a blue screen of death.
That's about all I know...

I updated Windows drivers (it said I had three updates to download) but still no luck.
This is the error report I receve upon reboot:
Problem signature:
Problem Event Name:    BlueScreen
OS Version:    6.1.7601.2.1.0.768.3
Locale ID:    4105
Additional information about the problem:
BCCode:    1000007e
BCP1:    FFFFFFFFC0000005
BCP2:    FFFFF8800F4249F2
BCP3:    FFFFF88003292918
BCP4:    FFFFF88003292170
OS Version:    6_1_7601
Service Pack:    1_0
Product:    768_1
Files that help describe the problem:
C:\Windows\Minidump\011213-18985-01.dmp
C:\Users\Gumballthechewy\AppData\Local\Temp\WER-44444-0.sysdata.xml
Read our privacy statement online:
http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409
If the online privacy statement is not available, please read our privacy statement offline:
C:\Windows\system32\en-US\erofflps.txt

Blue screen of death when disconnecting iPhone from computer

So I bought the iPhone and even though I own a Mac I decided to connect it to my work PC which happens to run Windows XP. Everything worked great until I took a picture with the iPhone. As soon as I connected the iPhone, the computer crashed with a blue screen of death. So I looked it up on the forums here and found the article that talks about what COULD be the issue. What Apple is saying with that article basiclly is that this is "your" problem and not theirs so good luck trying to find which one of the 50 drivers that I have on my machine causes the issue. I tried to fix it by updating the drivers that they recommend and the problem is still there. Fine, I will not take pictures with the iPhone.
And then yesterday out of the blue (no pun intended) iTunes gave me an error message when I connected the iPhone, I didn't pay any attention to it and dismissed it only to find out that now every time I remove the iPhone from the computer, it crashes it with a blue screen of death. So now I can't sync the iPhone at all! How much more unsaved work am I going to loss because of this product?
On a personal note, I am a huge fan of Apple's products but I am extremely upset about this. Not only did Apple create a sloppy software implementation, they are making it look like it's a Windows problem. None of the other products that are installed on my machine cause my computer to crash like that, and if I do have an outdated driver (which I doubt!) then the developers of those products have found a way to deal with them WITHOUT crashing!
Please advise
Message was edited by: gdror

ok. first I couldn't log in with my previous nickname (not sure why) so I created a new one. Anyways, thank you for your reply and I'm sorry for coming off like jack it's just that losing your data three times will do that to you. I will tunnel my anger back at Microsoft I guess.
In any event, I went back and took a look at my drivers and didn't find any Lexmark or Logitec in there, however I decided to remove the built-in camera driver that came with the laptop and that seemed to work (it turns out that Logitec makes that camera!). I also moved the USB cable to a different port on the computer and now I don't get the blue screen when I disconnect the iPhone.
Thanks again for your help, it seems like I am safely syncing again
p.s. since I can't log in as the original author you might want to have a mod mark the question as answered. thanks.

Windows 7 - Memory Dump problem ! Blue screen of death !! HELP

Hey guys,
I have an iMac 27 inch 2011 running Windows 7 home premium 64bit using bootcamp. My computer specs are
I Mac OSX 10.7
CPU - Intel i7 3.4 ghz quad core
RAM - (16 gb )
VIDEO - ATI Radeon HD 2 GB
I installed windows 7 on my imac using bootcamp today. It was working fine until i started installing things and i ran into the blue screen of death saying Memory dump. This message only shows for about 2 seconds and then restarts my computer. It randomly happens, such as internet explorer or just on my homescreen.
Thanks in advance for you help.
Thank you

To locate any of the forums click the Apple Support Communities link in the upper left of this page, then type in the first word of what you're looking for.
As for returning the machine no, I suspect you just have an installation problem. Macs run MS Windows in Boot Camp better than most dedicated Windows boxes.

Blue screen of death - was fine until I updated windows :(

Similar Messages

Maybe you are looking for