Blue screen of death Windows 7 (BUGCODE_USB_DRIVER)

I have the Inspiron 1564 and I am encountering many blue screens.
Here is the information I have collected from the BSOD dump
Bug Check String : BUGCODE_USB_DRIVER
Bug Check Code : 0x000000fe
Parameter 1 : 00000000`00000008
Parameter 2 : 00000000`00000006
Parameter 3 : 00000000`00000005
Parameter 4 : fffffa80`05c66160
Caused By Driver : usbhub.sys
Caused By Address : usbhub.sys+12a60
Fire Descripiton : Default Hub Driver for USB
Crash Address : ntoskrnl.exe+6f880
Thank you and possibly if someone could help me it would be great.
I checked out the Device Manager and I noticed that the USB Controllers has a sign next to it when I plug in a USB ( by the USB Mass Storage Device and it says Windows is uninstalling this device. (Code 21))
(And if i only need to reinstall the driver, I would like to know where i can locate it.)

We do need the actual DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.  
WE NEED AT LEAST TWO DMP FILES TO SPOT TRENDS AND CONFIRM THE DIAGNOSIS.
You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.
If you are overclocking stop.  (chances are if you dont know if you are, you are not)a
To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.  
The procedure:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button. (if available on  your site, MS doesnt have this)
 *Please upload them to a file sharing service like Skydrive or"Rapidshare" and put a link to them in your reply.
Link for how to  upload below.
http://www.wikihow.com/Use-SkyDrive
To ensure minidumps are enabled:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.
Please also run MSinfo32 and upload the output as well.
To run MSinfo32 please go to start>run>MSinfo32
Go to "file" "save" and upload the saved file with the DMPS
System specs are extremely useful so please include whatever you know.
Blue Screen View & Who Crashed are often wrong and should only be used in an emergency
Team Zigzag3143.com
Wanikiya & Dyami--Team Zigzag

Similar Messages

  • Blue screen of Death - Windows Vista

    Hello,
    My HP Pavillion has died - or maybe is just dying. I forced a shutdown yesterday because it froze completely. Now, it will not restart. When I start it, it gives me the black screen where it "scans" everything because it found some "fatal error" (drama queen much?) and then gives me my sign in screen, I sign in, and then I get a BLUE SCREEN where it informs me it is shutting down again (without even asking how I feel about it. HOW RUDE.) 
    Anyway, it shuts off, turns itself back on (goodness knows I'M not doing it) and then - the black screen checks my disc space again, sign in screen, blue screen, shuts down - you get the point ,it's an endless cycle.
    Oh also, my keyboard is not working. The mousepad works, although only to move the cursor (I can't actually click on anything, which as of this morning, makes even signing in impossible.)
    Is there any hope? 
    Thank you.

    HI leetasee,
    Sorry to hear about the Blue Screen of Death (BSOD) that you are getting. What is the error message that you are getting with the BSOD? A BSOD can either be caused by software or hardware. Let's see if you can check the computer for hardware failures using the HP Diagnostic Tools. Below I have included a link on how to use the tools. You can use them from the boot menu, run the System Test – Extensive.
    Testing Hardware Failures Windows Vista:
    http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&dlc=en&docname=c01443317&lc=en&jumpid=reg_r1002_us...
    Something else to try is see if you can boot into safe mode.
    Start your computer in safe mode:
    http://windows.microsoft.com/en-ca/windows/start-computer-safe-mode#start-computer-safe-mode=windows...
    If that works then try the link below to deal with any potential software problems.
    http://support.microsoft.com/kb/958233
    Thank you,
    Please click “Accept as Solution ” if you feel my post solved your issue.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Thank you,
    BHK6
    I work on behalf of HP

  • Blue screen of death windows 8.1 driver_irql_not_less_or_equal (iaStorA.sys)

    i get this whenever i try to open speed fan. 
    i am using i5 4570 cpu
    b85m-e motherboard 
    gtx760 video
    windows 8.1 64bit
    please help

     We do need the actual log file (called a DMP file) as they contain the only record of the sequence of events leading up to the crash, what drivers were
    loaded, and what was responsible.  
    We prefer at least 2 DMP files to spot trends and confirm the cause.
    Please follow our instructions for finding and uploading the files we need to help you fix your computer. They can be found here
    If you have any questions about the procedure please ask
    If you are using Blue screen view, who crashed, or a similar application, don't.  They are wrong at least as often as they are correct
    Wanikiya and Dyami--Team Zigzag

  • Blue Screen of Death - Windows 7 - Dump Attached

    Hi,
    I'm really struggling with this BSOD.  It's a repeating BSOD and I can't start up Windows.  Any help would be greatly appreciated!
    Dump File on Skydrive: http://sdrv.ms/X13pcY
    Thank you!!!
    JOHN

    Hi,
    I'm really struggling with this BSOD.  It's a repeating BSOD and I can't start up Windows.  Any help would be greatly appreciated!
    Dump File on Skydrive: http://sdrv.ms/X13pcY
    Thank you!!!
    JOHN
    *                        Bugcheck Analysis                                    *
    DRIVER_CORRUPTED_EXPOOL (c5)
    An attempt was made to access a pageable (or completely invalid) address at an
    interrupt request level (IRQL) that is too high.  This is
    caused by drivers that have corrupted the system pool.  Run the driver
    verifier against any new (or suspect) drivers, and if that doesn't turn up
    the culprit, then use gflags to enable special pool.
    Arguments:
    Arg1: 0000000000006d65, memory referenced
    Arg2: 0000000000000002, IRQL
    Arg3: 0000000000000000, value 0 = read operation, 1 = write operation
    Arg4: fffff800025bddd3, address which referenced memory
    Debugging Details:
    BUGCHECK_STR:  0xC5_2
    CURRENT_IRQL:  2
    FAULTING_IP: 
    nt!ExFreePoolWithTag+43
    fffff800`025bddd3 418b45f0        mov     eax,dword ptr [r13-10h]
    CUSTOMER_CRASH_COUNT:  1
    DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT
    PROCESS_NAME:  System
    TAG_NOT_DEFINED_c000000f:  FFFFF88001E8CFB0
    TRAP_FRAME:  fffff88001e85780 -- (.trap 0xfffff88001e85780)
    NOTE: The trap frame does not contain all registers.
    Some register values may be zeroed or incorrect.
    rax=0000000000000000 rbx=0000000000000000 rcx=0000000000006d75
    rdx=0000000000000000 rsi=0000000000000000 rdi=0000000000000000
    rip=fffff800025bddd3 rsp=fffff88001e85910 rbp=fffffa8011695810
     r8=0000000000000000  r9=0000000000000000 r10=fffffa8011695020
    r11=0000000000000002 r12=0000000000000000 r13=0000000000000000
    r14=0000000000000000 r15=0000000000000000
    iopl=0         nv up ei pl nz na pe nc
    nt!ExFreePoolWithTag+0x43:
    fffff800`025bddd3 418b45f0        mov     eax,dword ptr [r13-10h] ds:ffffffff`fffffff0=????????
    Resetting default scope
    LAST_CONTROL_TRANSFER:  from fffff80002491569 to fffff80002491fc0
    STACK_TEXT:  
    fffff880`01e85638 fffff800`02491569 : 00000000`0000000a 00000000`00006d65 00000000`00000002 00000000`00000000 : nt!KeBugCheckEx
    fffff880`01e85640 fffff800`024901e0 : 00000000`00000000 fffff800`0247c0d9 00000000`00000000 fffffa80`10cc94c0 : nt!KiBugCheckDispatch+0x69
    fffff880`01e85780 fffff800`025bddd3 : 00000000`00000000 fffff880`03d1b38c fffff880`01e680c0 ffff0000`02f8afd4 : nt!KiPageFault+0x260
    fffff880`01e85910 fffff880`0147c845 : 00000000`00000000 00000000`00000000 fffffa80`10d77bd0 00000000`00006d75 : nt!ExFreePoolWithTag+0x43
    fffff880`01e859c0 fffff880`03d6407e : fffffa80`11695810 fffffa80`10ccbe70 00000000`00000000 fffffa80`106871a0 : ndis!NdisFreeMemory+0x15
    fffff880`01e859f0 fffffa80`11695810 : fffffa80`10ccbe70 00000000`00000000 fffffa80`106871a0 00000000`00000000 : VBoxNetFlt+0x307e
    fffff880`01e859f8 fffffa80`10ccbe70 : 00000000`00000000 fffffa80`106871a0 00000000`00000000 fffff880`0153664e : 0xfffffa80`11695810
    fffff880`01e85a00 00000000`00000000 : fffffa80`106871a0 00000000`00000000 fffff880`0153664e fffffa80`10d77b00 : 0xfffffa80`10ccbe70
    STACK_COMMAND:  kb
    FOLLOWUP_IP: 
    VBoxNetFlt+307e
    fffff880`03d6407e ??              ???
    SYMBOL_STACK_INDEX:  5
    SYMBOL_NAME:  VBoxNetFlt+307e
    FOLLOWUP_NAME:  MachineOwner
    MODULE_NAME: VBoxNetFlt
    IMAGE_NAME:  VBoxNetFlt.sys
    DEBUG_FLR_IMAGE_TIMESTAMP:  50d1c564
    FAILURE_BUCKET_ID:  X64_0xC5_2_VBoxNetFlt+307e
    BUCKET_ID:  X64_0xC5_2_VBoxNetFlt+307e
    Followup: MachineOwner
    Bug Check 0xC5 : http://msdn.microsoft.com/en-us/library/windows/hardware/ff560192(v=vs.85).aspx
    ** The Blue Screen caused by (
    VBoxNetFlt.sys ) , Vboxnetflt.sys with description VirtualBox Bridged Networking Driver is a driver file from company Oracle Corporation belonging to product Oracle VM VirtualBox,
    so you can change the Bridged Adapter to Internal Network it solve your Blue Screen.
    To change the Bridged Adapter >> Right Click on your VM Client >> Settings >> Network >> Attached to >> Internal Network
    >> OK.
    Regards,
    MCT / MCITP / MCTS / MCSA / MCSE / C|EH / CCNA

  • Blue Screen of Death Windows 7 - (64bit) - Locale ID: 1033

    Hello there. I've been having issues with the blue screen that has been frequently occurring. I don't know a whole lot about computers so I was hoping if you could help me out. The Information regarding the bluescreen is below. 
    Problem signature:
      Problem Event Name: BlueScreen
      OS Version: 6.1.7601.2.1.0.768.3
      Locale ID: 1033
    Additional information about the problem:
      BCCode: 1000007e
      BCP1: FFFFFFFFC0000005
      BCP2: FFFFF88004C9EE62
      BCP3: FFFFF880039854B8
      BCP4: FFFFF88003984D10
      OS Version: 6_1_7601
      Service Pack: 1_0
      Product: 768_1
    Files that help describe the problem:
      C:\Windows\Minidump\052214-21200-01.dmp
      C:\Users\Spencer\AppData\Local\Temp\WER-111119-0.sysdata.xml

    Hi,
    In order to assist you, we will need the .DMP files to analyze what exactly occurred at the time of the crash, etc.
    If you don't know where .DMP files are located, here's how to get to them:
    1. Navigate to the %systemroot%\Minidump folder.
    2. Copy any and all DMP files in the Minidump folder to your Desktop and then zip up these files.
    3. Upload the zip containing the .DMP files to Onedrive or a hosting site of your choice and paste in your reply. Preferred sites: Onedrive, Mediafire, Dropbox, etc. Nothing with wait-timers, download managers, etc.
    4 (optional): The type of .DMP files located in the Minidump folder are known as Small Memory Dumps. In %systemroot% there will be what is known as a Kernel-Dump (if your system is set to generate). It is labeled MEMORY.DMP. The difference
    between Small Memory Dumps and Kernel-Dumps in the simplest definition is a Kernel-Dump contains
    much more information at the time of the crash, therefore allowing further debugging of your issue. If your upload speed permits it, and you aren't going against any strict bandwidth and/or usage caps, etc, the Kernel-Dump is the best
    choice. Do note that Kernel-Dumps are much larger in size due to containing much more info, which is why I mentioned upload speed, etc.
    If you are going to use Onedrive but don't know how to upload to it, please visit the following:
    Upload photos and files to Onedrive.
    After doing that, to learn how to share the link to the file if you are unaware, please visit the following link -
    Share files and folders and change permissions and view 'Get a link'.
    Please note that any "cleaner" programs such as TuneUpUtilities, CCleaner, etc, by default will delete .DMP files upon use. With this said, if you've run such software, you will need to allow the system to crash once again to generate a crash dump.
    If your computer is not generating .DMP files, please do the following:
    1. Start > type %systemroot% which should show the Windows folder, click on it. Once inside that folder, ensure there is a Minidump folder created. If not, CTRL-SHIFT-N to make a New Folder and name it Minidump.
    2. Windows key + Pause key. This should bring up System. Click Advanced System Settings on the left > Advanced > Performance > Settings > Advanced > Ensure there's a check-mark for 'Automatically manage paging file size for all
    drives'.
    3. Windows key + Pause key. This should bring up System. Click Advanced System Settings on the left > Advanced > Startup and Recovery > Settings > System Failure > ensure there is a check mark next to 'Write an event to the system
    log'.
    Ensure Small Memory Dump is selected and ensure the path is %systemroot%\Minidump.
    4. Double check that the WERS is ENABLED:
    Start > Search > type services.msc > Under the name tab, find Windows Error Reporting Service > If the status of the service is not Started then right click it and select Start. Also ensure that under Startup Type it is set to Automatic rather than
    Manual. You can do this by right clicking it, selecting properties, and under General selecting startup type to 'Automatic', and then click Apply.
    If you cannot get into normal mode to do any of this, please do this via Safe Mode.
    Regards,
    Patrick
    “Be kind whenever possible. It is always possible.” - Dalai Lama

  • Ipod crashes windows (blue screen of death)

    Hi all. A bit of background info:
    A couple of months ago the hard drive crashed on my friends computer. They had to reinstall their OS. Thankfully they had made backups of most everything and were able to get most things reinstalled successfully.
    Now they are using a 15g ipod connected through a firewire port on an HP laptop. They do not have a USB adaptor, so gotta go with the FW.
    Anyway, when they connect the ipod the computer completely crashes to the blue screen of death and does the physical memory dump. There is an error message, something along the lines of a driver issue.
    I know this is vague information, but any pointers on how to proceed in troubleshooting this would be greatly appreciated, thanks
    Frost

    hi Frostine!
    Anyway, when they connect the ipod the computer completely crashes to the blue screen of death and does the physical memory dump. There is an error message, something along the lines of a driver issue.
    we can sometimes narrow this down a bit by checking on the numerical and text codes showing up with the blue screen. (ie 0x[zeros/letters/numbers] CAPSANDUNDERSCORES)
    here's a reference on the sorts of things i'm checking on:
    Troubleshooting Windows Stop Messages
    can you get that information for us from their PC?
    (if the screen is specifying the file that Windows is crashing on, that would be helpful to know too.)
    love, b

  • Windows Vista Crashing When Ipod is Plugged In. Blue Screen of Death?

    A week ago, my computer suddenly started to reboot whenever I plugged my 5th generation 80 gig Ipod in to sync. A blue screen will pop up, and automatically restart.
    I do not believe this is the blue screen of death that appeared 2 months ago. I have upgraded to Itunes 8.0.1 when it was first released, and I had no problems until a week ago. I haven't heard of anyone receiving the blue screen of death since the update to Itunes 8 was released.
    I have also lost all of my music from my Ipod, so I am anxious to figure this out.
    Here is what the blue screen (certain passages paraphrased, the specifics were copied directly):
    A problem has been detected and windows has shut down to prevent damage to your computer.
    BADPOOLHEADER
    If this is the firs time you've seen this stop error screen, restart yoru computer. If this screen appears again, follow these steps:
    Make sure all hardware and software is properly installed
    If it continues, disable/remove any newly installed hardware and software. Disable BIOS memory options such as caching or shawoding. If you need to use safe mode to remove or disable components, restart your computer, press F8 for Advanced Sartup options, then select safe mode.
    Technical information:
    *STOR: 0x00000019 (0x00000020, 0xB7C4CE50, 0Xb7C4CE68, 0x0A030203)
    /end blue screen
    Any help you have would be greatly appreciated!

    Have you tried the troubleshooting advice in this article?
    http://support.apple.com/kb/TS1502
    Was a file name mentioned in the stop message? usually something.sys That can be a clue to the problem is the Apple advice doesn't help.

  • Blue Screen of death - now can't load Windows (even in safe mode)

    Last night laptop (Satellite L500 19Z; Win 7 64 bit) crashed whilst playing CIV4. Got a blue screen of death; before I had chance to read any of the error messages on it the machine rebooted.
    It loaded windows in safe mode fine then, and informed me as it had loaded safe mode OK the problem will be related to some recently installed software and I should uninstall programs I'd installed until it would load normally. As it was late last night I shut down and thought I'd sort it in the morning (in retrospect this may have been a mistake ....).
    Today, when the machine tries to boot up it attempts a Startup Repair; unfortunately this fails every time and it says "Startup repair has tried several times but still cannot detemine the cause of the problem"
    I looked at the log it produces but it passes all the individual tests.
    I also can't access the advanced options for system recovery & support, which appears on the Startup Repair dialog box as it demands I be logged in, which apparently I'm not (presumably as the machine never got to the windows login screen before trying the startup repair). The error message reads "you must be logged in to access system recovery options. If you are having trouble logging in please contact your computer administrator for assistance. please click OK to restart the computer."
    I've had a go at booting into the various advanced options (safe mode, safe mode with command prompt etc. but the outcome is the same).
    I also tried the Repair your Computer option from the advanced boot options screen, but after the screen where it asks you to choose the language and keyboard, I get the same login error mentioned above.
    Is there a way to repair or even run the hard disk based windows recovery (haven't got the recovery DVD with me as I'm away from home for a couple weeks) without logging into windows? I would have expected there to be but have yet to figure out how to do it.
    (there are no disks in the disk drive, no other devices attached to the laptop - I've tried it with mains power and with the battery and have not noticed any differences)
    Thanks
    James

    Normaly the reinstall data is on a separate part on your HD, not in Windows.
    The register is only used for Windows.
    If it doesn't work you can always try to reinstall from a DVD later.
    It does mean all your data on C:\ will be gone. If you can hook your HD on an other PC you can try to safe your work with a recover prog.

  • X200 Tablet - Wacom Pen Blue Screen of Death on Windows 7

    Hello...hopefully someone can help & point me in the right direction...I have a Lenovo x200 tablet PC (Stylus Only Version) - and recently installed Windows 7 Professional (64bit)
    The OS install went perfectly...Once installed, I did all the Systems Updates for Windows 7, including all the updates for Lenovo using System Update 4.01.....However, I have an issue that I cannot seem to figure out...
    PROBLEM # 1
    The biggest issue I now face is, whenever I put the Digitized Pen next to the Tablet Screen within 2 seconds I get the 'Blue Screen of Death'....and it automatically Reboots....This ONLY happens when I touch the Pen to the screen....
    I uninstalled the 'Wacom Drivers' - within the Device Manager, which i assume were installed by the system update(s)....After, uninstalling the issue of the 'Blue Screen' from happening when the pen touches the screen is gone.....However, I have no way of being able to use the Pen...it does not show any cursor or inking....Is there a specific DRIVER that I should be installing on my own to make this work properly - without getting the 'Blue Screen of Death' each time?....I really need some guidance on this issue. 
    PROBLEM # 2
    My Second issue, which is suddenly occured after day 2 of installing updates is the Lenovo System Update 4.01 -- Suddenly, after working on day 1 - now, whenever i try to 'Check New Updates' i get a popup that says "An error was detected with the Package catalog for your system on the System Update Server. Please contact the Support Center".
    I called techical support on the phone - and they made it seem like this was not their problem and they could not help me...The odd thing is, that this was working before, and now all of sudden it doesnt work...
    If someone can please advise me on what to do, especially with the Pen Driver problem, I would greatly appreciate it....Thanks!
    Solved!
    Go to Solution.

    **FIXED IT** TWICE!
    I've been messing with this on multiple machines at my school.
    I was getting the BSOD, "no tablet installed" all that good stuff.
    I installed this, that and the other thing.
    After testing another machine, I read something in the BSOD that caught my attention.
    It mentions resetting the cache of the BIOS. I wasn't sure what that meant, or how to do it.
    But I was able to get into the BIOS (F1 on the Lenovo splash screen) and I just tapped F9 (load default Bios options -paraphrasing) Then I hit ESC- it prompts to save the settings, agree and let the computer continue to boot.
    I was able to test the Pen at the login screen. Just repeated this process on another X200 computer and it worked again.
    Try it.
    Good luck!

  • Windows "Blue screen of Death" when booting computer attached to LabVIEW PXI realtime system

    Good Morning (at least in the western hemisphere)!
         I'm having a problem on two test systems where intermittently, at least on one machine, I get a Windows "Blue Screen of Death" error message when booting the machine connected to a PXI RT system. I reloaded the RT systems software yesterday (LV RT 7.1.1, NI-VISA 3.3.1) and am having this problem on two different setups, two laptops, two PXI chassis. Our short term work around has been to boot with the network cable removed at one end or the other, but these are the baseline models for a larger test system in the design/construction stage that will not be used by knowledgeable engineers but by (probably more knowledgeable!) technicians.  Any ideas would be a help
    Thanks again,
    Putnam
    Certified LabVIEW Developer
    Senior Test Engineer
    Currently using LV 6.1-LabVIEW 2012, RT8.5
    LabVIEW Champion

    Blue screens are almost always caused by drivers and not by applications, so chances are there's a problem on the driver level.  The crash log file will be instrumental to diagnosing this problem.
    Turn on the crash event logging as described in this Microsoft KB:
    http://support.microsoft.com/kb/314084/EN-US/
    ...and then post the details from the crash found in the Windows Event Viewer here. That will help us narrow the problem down.
    --Paul Mandeltort
    Automotive and Industrial Communications Product Marketing

  • Blue Screen of Death in Windows

    Hello,
    I am getting the Blue Screen of Death about once a every few days. My iMac does not do this. Please help. My HD is defragmented. I have Windows XP Home.
    Thanks!

    Having same problems on Windows XP SP3 on my MacBook. Both Mac OS X and XP are up to date. I'll admit I haven't defragmented in a while, but I haven't been using it that long and I don't do much heavy stuff on it so I didn't think that'd be an issue(??). It'll do it without warning, normally a blue screen almost immediately followed be a reboot; sometimes it's a screen-freeze instead. It only started a month ago and when it happens, it's only on XP and every few days, but I've lost work because of it and it's driving me nuts!
    I'm sorry I'm not awfully technical, but has anyone got any ideas? Would reinstalling Windows be a good idea and if so how would you do it?
    Thanks for any help!
    Mike

  • IPod Causing Blue Screen of Death on Windows Vista

    I'm posting this in the correct forum now:
    For some reason, all of a sudden, whenever I plug in or unplug my iPod to my computer, the computer crashes and quickly shows a blue screen of death before restarting. It has not done this before today. I haven't done anything out of the ordinary with the iPod or the computer that would cause it to do this.
    When iTunes opened, it said there was a Windows Update to fix a problem with iPods corrupting upon disconnecting from the PC, but when I tried to download the update, it said something about the update not being needed for this system. The iPod isn't corrupted, everything is still on it. I don't know what the deal is.
    I tried system restore back to like a week ago, but this did nothing to help.

    First, update the USB Root Driver on your computer: http://docs.info.apple.com/article.html?artnum=305136 Even if there are no new drivers for your computer, follow the last part of the article and let Windows update your USB driver.
    Second, be sure you are using a rear port on your computer.
    Third, with only the iPod, mouse and keyboard connected (no speakers, no mic, nothing else), reassign the drive letter on your iPod. Try M or P or Z: http://docs.info.apple.com/article.html?artnum=93499

  • Blue screen of death when running labwindows​, pxi chassis, and windows 2000

    Hi, when programming under labwindows the software crashes cvi, and windows NT and i get the blue screen of death...usually every hr or so. I checked the hw config and there are no conflicts. Is it normal to share IRQ 9 for all? is there a document that explains the I/O map addresses for the pxi to check for conflicts? I got all NI instruments, but one irig board. Currently only talking to the DMM and the switch.

    me also
    -win2000
    -cvi 6.0
    -pxi1006 8176cpu
    -dmm4060
    -IVI1.83 ,nidaq693,nidmm201,nidmm21
    - break program after a nidmmread function
    - terminate program
    - rerun program
    - DMM Blue Screen of Death..everytime
    - Make Software User Friendly -
    Attachments:
    BADDMM.ZIP ‏3 KB

  • Blue Screen of Death from Apple Wireless Keyboard in Windows 7

    Hi all,
    Situation: I have Windows 7 Professional 64 bit installed (boot camp) on my late 2008 MBP. Oftentimes, I'm plugged in to an LED Cinema display and work off of the Apple Wireless Keyboard & Magic Mouse. The Boot Camp partition / Drivers were originally installed from a Snow Leopard DVD. My Apple Software update reports that all my Apple Windows Software is up-to-date.
    Problem: Since installing Windows 7 back in May, I've experienced the Blue Screen of Death (BSOD) 5 times. Each time has resulted from a key press on my bluetooth keyboard after it had been sitting idle for some time and presumably gone into power save mode. Any key press causes an instantaneous BSOD. It only occurs when I'm running windows and I'm working off my bluetooth keyboard so it's hard to replicate and likewise hard to troubleshoot and determine if a fix has worked.
    *Error Details:* Here's some information I've extracted from the BSOD dump files.
    IRQLNOT_LESS_OREQUAL
    +The problem seems to be caused by the following file: ntoskrnl.exe+
    +Technical Information:+
    +* STOP: 0x0000000a (0xfffff80003032f00, 0x0000000000000002, 0x0000000000000008,+
    0xfffff80003032f00)
    +* ntoskrnl.exe - Address 0xfffff80002cbf600 base at 0xfffff80002c4f000 DateStamp+
    0x4b88cfeb
    Thanks for the help!
    Paul

    I'm experiencing the same problem with the BSODs while using my Apple wireless keyboard (latest model).
    I'm running Windows 7 x64 and admit that I bypassed the BootCamp software/driver installation wizard after it complained that my model didn't support installation of the x64 drivers. Its a bit of a gray area, as my system is 64-bit capable and many services and applications run in 64-bit mode without my intervention.
    Just curious if Windows 7 x86 users are experiencing these BSODs or is it a coincidence that you all are installing the drivers creatively.

  • Windows XP sp3 + iTunes 8 + New iPod Classic 120GB = Blue Screen Of Death

    HELP
    My PC has just upgraded itself with Windows XP Service Pack 3, I have downloaded iTunes 8, and just today bought a new iPod Classic 120GB so I could enjoy the new Genius facility (my old iPod was a 20GB model from 2005). However I keep getting the Blue Screen Of Death whenever I plug in the new iPod, even if I start-up the computer with the iPod connected.
    I've read other threads about this topic, but I've only seen people reporting this issue with Vista, not XP.
    - I'm thinking of uninstalling and re-downloading iTunes 8. Will it retain all playlists, album artwork etc.?
    - I'm also thinking of trying to connect with the iPod manually set to disk mode. Will this help to begin with?
    Anyone got a fix for this problem yet....Apple?

    As a follow-up to my questions above, I've now tried uninstalling and then re-installing iTunes 8 direct from the Download link at Apple.com. I still get the BSOD. I also tried with the new iPod 120GB manually set to disk mode. Again, still I get the BSOD. I also unplugged a couple of other USB peripherals from my PC (writing tablet, card reader), checked for any more Windows XP Updates, but still get the BSOD.
    Anyone got any more ideas?

Maybe you are looking for

  • BT Infinity available at my exchange, still can't ...

    OK I won't bore you all to much with the details of the quest to get an internet connection, but it basically goes like this. I moved address and when I tried to 'move' my BT Infinity service was told it was not available at my new address. I did a c

  • EMac 700MHz display turned purple/pink. Can't boot from HD and CD

    hi, I have several issues here: 1) My eMac display turned purple/pink from the start 2) It won't start from either HD or CD. It gets to the grey Apple and the spinning wheel.. After a while of spinning, it freezes and nothing else I can do. This happ

  • Conversion of logical System Name

    Hi, I have read somewhere that Conversion of logical System Name is part of BW System check Before go live. Can someone explain the purpose of it. Thanks in advance krish

  • Transfer Function (s-domain)

    Hello, I'm not sure that my previous message made it, so here goes again... I am trying to implement special analog filters in Labview that are specified by s-domain transfer functions. The only way I can think of to do it is to do a bilinear transfo

  • Short Dump in XD02

    Hi, I need a solution for the short dump which i'm getting at the time of accessing the XD02/XD03 transaction for only one particular customer number. Interestingly the same customer number was useful in that transaction a week before and i was able