Blue Screen on RESUME on HP Vision All-in-One PC

Hi. For the past week or so my All-in-One PC has been crashing with a Blue Screen whenever it comes out of hibernation. It doesn't seem to matter if it went into hibernate on its own, or through the Start -> Sleep action. The blue screen usually points to a page fault error KERNEL_DATA_INPAGE_ERROR.
I've restored my system in an attempt to fix it. It did, for awhile, but earlier today it started up again.
Some web searching has made me suspect that this is a manifestation of issues with the Microsoft fix KB2670838 . Other users have reported blue screens after installing it (usually as a prerequisite to IE 10), though I haven't seem reports of it happening after a resume, as it is for me.
Have others hit this kind of issue? Any suggestions on resolving it?
I'm planning to uninstall this fix, to see if it helps. I'll report back.
This question was solved.
View Solution.

I've isolated the patch that  triggers the blue screen to this one:
    AMD - Other hardware, Storage Controller - AMD SATA Controller
It's not a Microsoft patch, so there's no KB number, nor can it be uninstalled; you need to restore a previous configuration to correct the problem. However, restoring does work (I've done it three times now). When it's in place I get this blue screen coming out of Resume:
Bug Check String  : KERNEL_DATA_INPAGE_ERROR
Bug Check Code    : 0x0000007a
Parameter 1       : 00000000`00000020
Parameter 2       : ffffffff`c000009d
Parameter 3       : fffffa80`05eff7c8
Parameter 4       : 00000000`00000000
Caused By Driver  : ntoskrnl.exe
Caused By Address : ntoskrnl.exe+75c00
Removing the driver fixes the problem.
Hope this helps anyone else that might have hit this bug. Let me know if I can provide more info, or if you'd like an official  bug report.

Similar Messages

  • Blue screen error c824C1500 on HP Photosmart All-in-one series C5580

    A blue screen error c824C1500 appears on my HP Photosmart All-in-one series C5580's display when I turn it on. I have gone through the basic troubleshooting solution and it give me the same error message when I plug the power cord back in. Any other solutions? Thank you.

    You probably need a new printhead or pump.  Either is financially prohibitive vs. a new printer.
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • T60 Type 2623 Blue Screen on Resume from Sleep Mode problem solved - XP Pro

    I hope that this post ends some frustrations for some people.
    I hope that IBM deals with this issue by getting ATI to fix the video driver issue.
    After three months of tracking down blue screens when resuming from Sleep Mode and some lockups while working, I have identified the problem on my T60 Type 2623 running Windows XP-Pro and all service packs and updates.  The Sleep Mode resume issues were intermittant and it would be fine for a day or two and then reboot on Resume or reboot every time I used Resume for a while.  For months the Blue Screen would reboot and attempt to send the message to Microsoft using the logs, but the logs were always corrupted.  I disabled every driver that I could and the problem continued for months.
    The problem solution came about when I decided to try my Rhapsody Music account after many months of not using it.  I kept getting a message about DRM (Digital Right Management) being disabled and Rhapsody software could not self-fix this.  So I finally called Rhapsody and they spent over an hour with me trying to get Rhapsody to work.  The support person asked me about my computer and I noted that it was an IBM T60.  He then asked about my Video Card and I responded that it was an ATI Mobility Radeon X1300.  After a few minutes on hold he asked about my driver version which was 8.442.3-080103a1-057754C the set from January 31, 2008.  He noted that there is a known problem wit the 8.4 driver and it interferes with DRM.  He had me go to control panel Settings and Hardware and then roll-back the driver to the prior version.
    After a reboot, the DRM issue was solved and I soon discovered that my resume from Sleep mode no longer crashed.  In fact it has been fine and crash free for over a month now.  I have noted that the older driver can sometimes resize my screen to something like 600 X 800 if I close the lid under certain circumstances, but that is just a function key reset to get my normal desktop resolution back.  At least it is not a blue screen reboot with a corrupted log file.
    Message Edited by retro74 on 07-05-2008 08:50 AM
    Solved!
    Go to Solution.

    Unfortunately I could not fix the problem so I wiped my system and loaded all new drivers before I found this posting.
    Is there a way to get the old ATI driver that works? The only one available on the ATI and Lenovo website is the latest one with the problem. I agree with you David, Lenovo should have fixed this problem already with ATI.
    John

  • HT1436 My Power Mac G5 will not fully boot without safe mode, it only comes to a blue screen where my cursor duplicates in to 2, (one is frozen, one can move by moving the mouse). What is my problem, and how do I fix it?

    My Power Mac G5 will not fully boot without safe mode, it only comes to a blue screen where my cursor duplicates in to 2, (one is frozen, one can move by moving the mouse). What is my problem, and how do I fix it?

    Great clue Lukas...
    One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
    PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
    Reboot, test again.
    If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts>Login Items window to see if it or something relevant is listed.
    Check the System Preferences>Other Row, for 3rd party Pref Panes.
    Also look in these if they exist, some are invisible...
    /private/var/run/StartupItems
    /Library/StartupItems
    /System/Library/StartupItems
    /System/Library/LaunchDaemons
    /Library/LaunchDaemons

  • Build 9926 - blue screen after resume from long sleep

    I installed Windows Technical Preview build 9841 in October, 4 days after it came out, via an upgrade, keeping everything, from the factory 8.1 (Toshiba with all the bloatware). The drive was almost empty at this point and I had installed only a couple
    of programs when I made the upgrade. I successfully upgraded to 9860 then 9879 the day those came out, and hadn't had any issues. Two days after installing 9879, I installed Linux Mint 17 KDE on a seperate 66GiB partition. Now I run a dual boot between Windows
    10 Pro Technical Preview (build 9926) and Kubuntu 15.04 Vivid Vervet preview. I hadn't had any problems with my laptop except for the very rare blue screen, until I tried installing Google Chrome Canary (under build 9879). It blue screened (BAD_POOL_CALLER
    I think) and it now does it after I resume from sleep (an overnight sleep where it hibernates or something) and I lift up the login screen. I think I'm the only one with this problem, so what can I do about it? Thanks

    PH
    These crashes were related to memory corruption (probably caused by a driver). 
    Please run these two tests to verify your memory and find which driver is causing the problem.  Please run verifier  first
    If you are over-clocking anything reset to default before running these tests.
    In other words STOP!!!  
    If you do not know what this means you probably are not
    1-Driver verifier (for complete directions see our wiki here)
    2-Memtest. (You can read more about running memtest here)
    Wanikiya and Dyami--Team Zigzag

  • Problems with lcd screen HP Officejet Pro 8600 e-All-in-One Printer - N911a

    The backlighting on my lcd screen has all but gone out. Product HP Officejet Pro 8600 e-all-in-one printer - N911a

    Hi greenbeaner, I see that you're having problems with your printer's display.  I would take a look at the document below.  Officejet Pro 8600  Let me know how it goes.  

  • TS3274 I have a blue screen and the display colours have all run.

    Dropped my iPad on its edge. No damage to the glad just a dent in the corner
    However the screen turned blue and the apps
    Look like X-ray photos with a bit of colour.
    Backed up and restore to no avail.
    Any idea? Or is it a new one required?

    Boot your computer using the install disc (hold C after turning on the computer). Open Disk Utility and repair the disk and disk permissions.

  • Mac mini dual display - blue screen flashes frequently

    I recently purchased a mac mini i7 model, with fusion drive.
    I have upgraded the RAM to 16GB.
    I have also purchased 2 monitors, both are LG 22EA63V LED.
    I connected one monitor direct HDMI to HDMI.
    The other monitor is connected from Thunderbolt to HDMI.
    Everything worked amazingly well for the first few weeks. Now, not so much....
    I frequently have the screen freeze and flash blue, and then resume as normal dual display mode.
    Other times the screen will flash blue and then come back as a single display. In this case the Thunderbolt to HDMI display appears as primary display, while the HDMI display loses connection.
    If I unplug the HDMI display completely, the blue screen flashing does not happen at all.
    So, what could be causing this problem, and how do i fix it?

    Hi Matt,
    See if there's some setting on the HDMI monitor for Input Source, or things like Auto-tune.

  • Blue Screen when I plug my Ipod Touch 8GB(Late 2009)

    My problem is when I plug my Ipod touch 8gb to my laptop(Acer Aspire 5632wlmi,intel core 2 duo processor T5200-1,60 GHz-533MHz L2 cache,1GBDDR 2,Up to 384MB NVIDIAGeForce GO7300 TurboCache,System: Microsoft XP Professional Version 2002 Service Pack 3,all required updates are done),the windows system detects problem and windows shuts down to prevent damage to my computer,this error message appears in blue screen with the technical information of :
    *Stop : 0x00000007E(0x0000005,0X00000000,0xF78FD7C8,0XF78FD4C4) .
    When the system goes down,I have to shut pc down from the power button and when I switch my laptop on I receive an error stating that "system has recovered from a serious error " which has signature of:
    BCCode : 1000007E BCP1:C000005 BCP2:00000000 BCP3:78FD7C8 BCP4:F78FD4C4 OSVer: 512600 Product:256_1
    And error report content is:
    C:\DOCUME~1FATIHF~1\LOCALS~1\Temp\WERffa3.dir00\Mini031610-02.dmp
    C:\DOCUME~1FATIHF~1\LOCALS~1\Temp\WERffa3.dir00\sysdata.xml
    What I have done regarding to try to solve the problem ,but not worked at all:
    1-I have uninstalled Itunes ultimate version(iTunes 9.0.3 for Windows XP,Vista or Windows 7) and other Apple related components on my Laptop(apple application support,Apple mobile device support,Apple Software Support,Quicktime etc.)
    2- a-I re-installed all components mentioned on step 1 and plugged my Ipod: It works when I plug for first time,then I sync with my audio,art-work folders.Then I unplug my Ipod to listen music and see my Art-work,when I plug my Ipod for 2nd time to my Laptop,it crashes and that same blue screen error occurs.
    b- I uninstalled all Apple components and plugged my Ipod to my Laptop,it charges the battery but no blue screen occurs.
    3- I reset my Ipod and meanwhile uninstall all Apple components again(exactly like in 1st step) in my laptop,then I re-install all components to my laptop, and follow the same steps as exactly in 2nd step.I plug my Ipod and it works for first time,than I do sync through Itunes again,than I unplug and use my Ipod,when I plug for 2nd time than the same blue screen error appears and laptop crashes.
    4- a- I reset my Ipod and Meanwhile uninstalled all Apple components,I re-installed iTunes 8.2.1 for Windows XP,Vista or Windows 7) but the same blue screen occurs.
    b- I uninstall iTunes and plugged my Ipod to my laptop,no blue screen occurs.
    5- I asked my colleague who has MacBook and plug my Ipod to her MacBook, than open Itunes,but Itunes(iTunes 9.0.3 for Mac OS x) can not see my Ipod as device and I am not able to do anything.
    6- I've searched in Apple official websites and Google and many Blogger sites,Fan sites and all other possible technical sites but could not find any solution.
    7- I've contacted(phone call) to the Local(Portugal) Support Apple Support Centre and explained all history of the problem clearly.But they could not help me,they advised the same possible solutions which I've already done and they said that they can not do more.And than they gave me a support mail address to contact.([email protected])
    8- I've sent an email to [email protected], 2 days later they've answered me with the information that they are phone based support therefore they not provide me support.
    Basically I am not able to import or export anything to/from my ipod,anyway all windows is going down.
    It is first time I buy Apple product.My friends who have Apple products were generally positive about them,and I was thinking to by a MacBook as well,but after this problem I got doubts and I am not satisfied and happy at all. Since days I am trying to find solutions and find the exact support contacts to get helped with this problem.But could not reach any information. Now I don't have any positive Idea about Apple products or support service.I went to the Techno-Market which I bought the Ipod to change with an Iphone or at least try to have my money back if not possible to swap it with Iphone,but they've told me that it has been more than 15 days and they can not swap it or refund it,even if it was possible they would not refund it because the very sensitive backside of Ipod has some small but visible scratches.
    Anyway I can see the difficulty of having Apple product,having support of product and finding the right contacts to communicate is not easy and I would really be very happy if anyone could change this idea of mine with helping me out to use my Ipod with peace and without any other problem.
    As you can see,I spent a lot of money to buy it and spent days to find solution to my problem and spent a lot of energy to find right Apple Support contacts to help me with my problem.And I am not able to use my product as I wish.
    Please advise me regarding to solve my problem. I hate to deal with courts and other legal ways to take action in those kind of cases. But if not of course it will be my last option to do it so.
    I am waiting an answer,please try to answer me as soon as you have an answer for me.
    Thanks In advance
    Best Regards
    PS:If you provide me an email address which I can send all print screens and full blue screen error message .txt I'll contact you soon after receiving your contact.
    Fatih
    [email protected]

    Have you tried the following document, kohida?
    [What to do when Windows displays a blue screen error message or restarts when syncing the iPhone or iPod touch|http://support.apple.com/kb/TS1502]

  • Ipod touch causing blue screen

    I'm new here so I hope I explain this properly. I have the latest version of itunes installed on my computer with a 1G nano. I just got a ipod touch. I pluged it into my usb port like I did with the nano and it moved all my music onto the touch. The problem now is when i try to plug the touch back into my computer it boots out and goes to the blue screen and says an unexpected error ocured and one or more disks need to be scaned. The computer boots back up and all is well until I try and plug the touch back in and the same thing happens.
    Any help would be great.

    Try:
    - Reset the iOS device. Nothing will be lost
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings      
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                 
    iOS: How to back up           
    - Restore to factory settings/new iOS device.
    If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
    Apple Retail Store - Genius Bar          

  • App crashes 30+ times/day - BLUE SCREEN APPEARS - system reboots

    HELP!
    I purchased a new Macbook Pro about 1.5 months ago, and am running PowerCADD (I work at an architecture firm). No problems on any of the other computers running 10.4, but for some reason my PowerCADD application crashes about 30 times or more per day! *NO ERROR LOG IT JUST GIVES ME A BLUE SCREEN, THEN REBOOTS THE COMPUTER.* All of my information is lost everytime it does this and it is very frustrating. I called PowerCADD and they were very surprised and had not seen this before.
    They suggested ARCHIVE and INSTALL, they said that Apple might not have installed 10.5 properly. Any suggestions?????????
    thank you

    Before doing an archive & instal there are other steps that might help. As this is a problem with a 3rd-party application Apple are usually interested in problems that might be their end of the problem and they usually cooperate well with other software providers in trying to resolve problems.
    1) Open Disk Utility from Applications/Utilities. Select your hard drive and run Repair permissions. If there is a list of ...is...should be... followed by 'Permissions repaired re-run this process until there are no further repairs needed. See whether this resolves the problem.
    2) If not, insert the original installation dvd and restart holding the C key until you see the Apple logo. In the first screen after loading is finished select language, then at the next screen go to Tools/Disk Utility. Again select your hard drive but this time choose Repair Disk. If any faults are found and repaired re-run this until no further faults are found. Also re-run repair permissions if faults were found. Restart and see how it goes.
    3) Check the PowerCADD website for updates and their support for any compatibility issues. If they have a discussion page check this to see whether there are any problems with Leopard.
    Failing all this you could then try the archive and instal option.
    Neville

  • Blue screen when try to update bios on lenovo w520

    Hello everyone  I'm pretty new here and I bought a new  laptop two days ago 
    my model  of my leptop is lenovo  W520 (4276-37U) / i7-2720QM / Quadro 1000M and my os is win 7 pro 64
    and i want to share with  you the problem that i have  experienced as I tried to update my bios verision 
    the problem with the blue screen start Immediately when you begin the BIOS update and popup window going up
    After reading several articles I tried to solve the problem and thankfully I did it and I solved it ~!
    So if it happens to someone I suggest you read what I did to solved this problem :
    1) first go to your anti virus program and disable it  and turn it off . i have  norton internet security and i have neutralized all options  . (if you have a firewall that came with  the anti virus program turn it off )
    2) after this go to control panel --action center ---change user account control settings -  And put  it to the lowest level
     (never notify ) and click ok
    3) go to windows firewall and turn it off
    4) now locate the lenovo airbag protection utility  open it and go to Configuration tab and Uncheck  the box
      ( turn off)
    "enable active protection system "   and then click apply .
    all done now you can try update your bios Without getting a blue screen !
    Hope I helped them all and everyone who had this annoying problem
    thanks
    shayy

    Interesting. I've never performed any of the steps documented above and all of my BIOS updates (and updates via System Update) have been applied with no issues. Perhaps I'm just living dangerously?
    Several items, however, were omitted:
     Fully charged battery
     Connected to AC supply
     Not in a docking station
    These items have been true from day 1 of ThinkPads.
    W520, i7-2820QM, BIOS 1.42, 1920x1080 FHD, 32 GB RAM, 2000M NVIDIA GPU, Samsung 850 Pro 1TB SSD, Crucial M550 mSata 512GB, WD 2TB USB 3.0, eSata Plextor PX-LB950UE BluRay
    W520, i7-2760QM, BIOS 1.42 1920x1080 FHD, 32 GB RAM, 1000M NVIDIA GPU, Crucial M500 480GB mSata SSD, Hitachi 500GB HDD, WD 2TB USB 3.0

  • Live CAM Video IM Pro - Blue Screen (KS.SYS)

    Just purchased Live CAM Video IM Pro first creative product.
    My System: WinXP SP2, GB, Over 8 GB system space free.
    Installation went fine (no errors) post install requested reboot .. rebooted system. Blue Screen with KS.SYS.
    Uninstalled all software. re-installed with bare minimum. Troubleshooted the system multiple times. Finally got the culprit (Live Cam Video IM Pro driver).
    Without driver system works fine with drivers Blue Screen. Tried backup copy of KS.sys no success (seems KS.sys is dinged!)
    Result: The cam is useless.
    Any help is greatly appreciated.

    no one can help me? plz thx

  • Blue screen fixes on 5s?

    my phone has been continusly restarting and blue screening for the last 2 days, all the while i have been waiting for an importaint call about a loved ones health in the hospital. This was almost a $1000 phone i would expect this peice of crap to work for that money. You've lost my business apple. Does anyone know any fixes as of now? it would be much apreciated. .

    Note that you have a 1 year warranty.  Standard troubleshooting...
    1. Try a Restart by pressing the sleep/lock button until you see the slider.  Slide to power off.  Restart by pressing the sleep/lock button until you see the Apple logo.
    2. Try a Reset by pressing the home and sleep buttons until you see the Apple logo. Takes about 5-15 secs of button holding and you won't lose any data or settings.
    3. Remove apps from Recently Used (multi-tasking) list...
    - From any Home Screen, double tap the home button to bring up the Recents List
    - Swipe up on the app preview card to remove it from the list
    - Press the home button when done.
    4. If still a problem restore with your backup.
    5. If still a problem restore as new, i.e. without your backup. See how it runs with nothing synced to it.
    6. If still a problem, it's likely a hardware issue.

  • MBP "System Profile" error when try read "Logs" and long time blue screen

    MBP "System Profile" error when try to read "Logs" and it takes long time blue screen at startup.
    This happened all time when I open the "System Profiler" application and then select the option "Log", then the system crashed again over and over. The system was reinstalled clean but the error occurs again, without any third party application installed.
    Here is the error:
    Sun Jun 22 20:13:47 2008
    panic(cpu 0 caller 0x001A8CD4): Kernel trap at 0x007efc12, type 14=page fault, registers:
    CR0: 0x80010033, CR2: 0x00000000, CR3: 0x013ab000, CR4: 0x00000660
    EAX: 0x00000000, EBX: 0x045ce1e0, ECX: 0x05782c64, EDX: 0x00010001
    CR2: 0x00000000, EBP: 0x344d3ca8, ESI: 0x046ad5c0, EDI: 0x046a8040
    EFL: 0x00010206, EIP: 0x007efc12, CS: 0x00000008, DS: 0x00010010
    Error code: 0x00000000
    Backtrace, Format - Frame : Return Address (4 potential args on stack)
    0x344d3ab8 : 0x12b0fa (0x459294 0x344d3aec 0x133243 0x0)
    0x344d3b08 : 0x1a8cd4 (0x4627fc 0x7efc12 0xe 0x461fac)
    0x344d3be8 : 0x19ede5 (0x344d3c00 0x206 0x344d3ca8 0x7efc12)
    0x344d3bf8 : 0x7efc12 (0xe 0x48 0x10 0x3e0010)
    0x344d3ca8 : 0x3ef261 (0x45ce1e0 0x46a2c40 0x49a7a4 0x0)
    0x344d3ce8 : 0x40abe6 (0x46a8040 0x46a2c40 0x344d3d28 0x3eeac0)
    0x344d3d08 : 0x40e4fb (0x46aec00 0x46a2c40 0x46aec04 0x46aec00)
    0x344d3d28 : 0x43ab14 (0x46aec00 0x46a2c40 0x600000 0x19c8d1)
    0x344d3d78 : 0x18801e (0x46aec00 0x4a5e5ac 0x4a5e5c0 0x11d975)
    0x344d3db8 : 0x12d17e (0x450adac 0x4a5e590 0x0 0x0)
    0x344d3df8 : 0x126257 (0x450ad00 0x0 0x18 0x344d3ee4)
    0x344d3f08 : 0x1973dd (0x344d3f44 0x0 0x0 0x0)
    0x344d3fc8 : 0x19f3b3 (0x479fee0 0x0 0x10 0x0)
    No mapping exists for frame pointer
    Backtrace terminated-invalid frame pointer 0xbffff1c8
    Kernel loadable modules in backtrace (with dependencies):
    com.apple.iokit.IOFireWireIP(1.7.1)@0x7ea000->0x7f2fff
    dependency: com.apple.iokit.IOFireWireFamily(3.4.4)@0x6ed000
    dependency: com.apple.iokit.IONetworkingFamily(1.6.0)@0x5d1000
    BSD process name corresponding to current thread: ioreg
    Mac OS version:
    9D34
    Kernel version:
    Darwin Kernel Version 9.3.0: Fri May 23 00:49:16 PDT 2008; root:xnu-1228.5.18~1/RELEASE_I386
    System model name: MacBookPro3,1 (Mac-F4238BC8)
    This is the System Config:
    Model: MacBookPro3,1, BootROM MBP31.0070.B07, 2 processors, Intel Core 2 Duo, 2.4 GHz, 2 GB
    Graphics: GeForce 8600M GT, GeForce 8600M GT, spdisplayspciedevice, 256 MB
    Memory Module: BANK 0/DIMM0, 1 GB, DDR2 SDRAM, 667 MHz
    Memory Module: BANK 1/DIMM1, 1 GB, DDR2 SDRAM, 667 MHz
    AirPort: spairportwireless_card_type_airportextreme (0x168C, 0x87), 1.3.5
    Bluetooth: Version 2.1.0f17, 2 service, 1 devices, 1 incoming serial ports
    Network Service: Ethernet, Ethernet, en0
    PCI Card: pci168c,24, sppci_othernetwork, PCI Slot 5
    Serial ATA Device: FUJITSU MHW2160BHPL, 149.05 GB
    Parallel ATA Device: HL-DT-ST DVDRW GSA-S10N
    USB Device: Built-in iSight, Apple Inc., high_speed, 500 mA
    USB Device: Bluetooth USB Host Controller, Apple, Inc., full_speed, 500 mA
    USB Device: Apple Internal Keyboard / Trackpad, Apple Computer, full_speed, 500 mA
    USB Device: IR Receiver, Apple Computer, Inc., low_speed, 500 mA

    Hello @larrycarol99,
    I understand that after upgrading your computer when you plug in an ethernet cord you get a hardware malfunction error. I am providing you with a Microsoft Support document: Hardware Malfunction Results in System Error Message that explains what causes that error and provides steps on fixing it. I am also including a link to the Compaq Presario 5300US Desktop PC Drivers page, which unfortunately does not have any drivers for your computer running Windows Vista.
    I hope this helps. Thank you for posting on the HP Forums. Have a great day!
    Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
    Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
    Dunidar
    I work on behalf of HP
    Find out a bit more about me by checking out my profile!
    "Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter

Maybe you are looking for