Blue screen on Z10 during start up

Hi all,
I'm experiencing some issues with my sister's Z10. What I think has happened is that I was updating OS when it ran out of battery (yeah I know, but some friend took the charger to charge her phone and I didn't notice it...), and now the phone starts (Blackberry logo, blue logo loading) but shows a blue wallpaper without any apps on it, no actions possible.
So I've tried to wipe it through my computer, as it's recognizing the phone when I'm plugging it, but I'm always getting an error message stating that the phone steup is not finished and that I need to disconnect it to finish the setup. **bleep**, that's what I'm trying to do smartass! I've tried it through the BB link software and throufh internet explorer but I'm always getting error messages and I don't know what else I could do.
To make things easier the phone was bought in Dominic Republic and I'm french trying to unsimlock my phone and my sister's (my works fine, despite some unwanted reboots).
Help me please!
Solved!
Go to Solution.

I would try one of the autoloaders that has been leaked for upgrading the OS on the Z10.
The process is simple. Download the OS and unzip it using 7zip or similar. I think it downloads in a .rar format.
Close Link and plug in the device. Then run the .exe file that was extracted using the previous step. It should take about 5 minutes to load the OS.
Here is a link with more info:
http://crackberry.com/leaked-os-10102342-blackberry-z10
1. Please thank those who help you by clicking the "Like" button at the bottom of the post that helped you.
2. If your issue has been solved, please resolve it by marking the post "Solution?" which solved it for you!

Similar Messages

Blue screen of death during start-up

Hey Adobe-Community,
I am having troubles with After Effects CC again. Every time I want to open After-Effects i get a BSOD. The last thing I can see is the opening-loading-thing (talking about that thing just the after effects version of it, logically I cant make a screencap of the AE version). I dont even get anything written in there - no "loading blabla" or "searching this-and-this" and so on - just the empty image without any information. It is like that for about five seconds before my audio starts jamming and I get a Blue Screen of Death.
System Specifications:
Windows 7 Home Edition - 64 Bit
CPU: Intel i5 2520m 2.5 GHz
RAM: 8 GB
Graphics: Intel HD Graphics 3000 and Nvidia GeForce GT 555M (I think I am currently running on the GeForce - does anybody know how I can check which card I am using right now...)
110 GB SSD - 40GB empty
500 GB HDD - 150GB empty
Laptop Screen: 1600x900
External Screen:1920x1080 (always using both screens)
Things I tried already:
Booting in Safe Mode
Result: Same as before - but without the Blue Screen. Just nothing happened. The Start-Up Screen of AE was showing, but again without information for about 5 minutes before I wanted to close it. Task Manager told me that there is no Application running, just a process. So that one didn't work.
Reinstalling After Effects
Same result as before - Blue screen and empty Start-Up-Screen
Reinstalling my Graphics Driver
After a bit of googling around I found some people mentioning that a Blue screen might come from troubles with my Graphics - so I reinstalled the driver from the GeForce. Same Result as before - Blue Screen.
I was able to run After Effects without any troubles just a couple of days ago. I didn't install any Plug-Ins, any new software, I cant even remember a Software update from any other software or anything (besides the Update for After Effects and InDesign from today).
Please, I really don't know what else to do.

Provide the crash details from your event viewer:
Working with your Operating System’s Tools
Mylenium

TS2990 blue screen comes up on start up but no icons on laptop

blue screen comes up on start up but no icons on laptop

Startup - Blue Screen
Startup - Gray, Blue or White screen at boot, w/spinner/progress bar
Startup Issues - Resolve
Startup Issues - Resolve (2)
Startup Issues - Resolve (3)

My iphnoe5S always crash with blue screen,sometimes can`t start up

my iphnoe5S always crash with blue screen,sometimes can`t start up

Hello liuqinqin,
Thank you for using Apple Support Communities.
For more information, take a look at:
iOS: Not responding or does not turn on
http://support.apple.com/kb/ts3281
If the device remains unresponsive or does not turn on (or power on), reset your device.
If there is no video or if the screen remains black, verify that the device has enough charge to turn on:
If you are using an iPad, ensure that it's connected to the USB Power Adapter supplied with the device.
Let it charge for at least twenty minutes, then see if it starts normally.
If there is no image on the screen, press the Sleep/Wake button to attempt to wake the device.
If the screen displays a red battery icon, continue charging the device until the battery is fully charged. Learn more about charging iPhone and iPod touch, or iPad.
If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
Connect the device to your computer and open iTunes.
If the device appears in iTunes, select and click Restore on the Summary pane. Learn more aboutrestoring iOS software.
Have a nice day,
Mario

My iPhone 5 started acting wierd earlier and the touched lived its own life. Suddenly it began the iPhone started to turn itself on and off several times, before it got a blue screen and wouldn't start again. What do I do?

My iPhone 5 started acting wierd earlier and the touched lived its own life. Suddenly it began the iPhone started to turn itself on and off several times, before it got a blue screen and wouldn't start again. What do I do?

press and hold the home button and the lock button together for atleast 10 secs or till the time u see the apple logo,once you see the apple logo,let go off the keys... good luck

HT3910 a blue screen appears at the start up

When I start my macbookpro a blue screen appears and stays. Nothing further happens ; can anyone help please?

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you boot, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the boot volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to boot and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal boot may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem?
After testing, reboot as usual (not in safe mode) and verify that you still have the problem. Post the results of the test.

Blue Screen - STOP Error During XP Install

I am trying to install Win XP on my new system and I keep getting a Blue Screen. It boots off the DVD drive, loads all the initial system files and when it says "Windows Is Starting" it goes to a Blue Screen stating that an error has been detected and Windows has been shut down.
I have the following:
865PE Neo2-FIS2R
P4 2.6GHz w/ 800MHz FSB
Corsair TWINX1024-3200C2PRO 1GB DDR400 Memory
Hitachi Deskstar 80Gb SATA Drive
ATI Redeon 9600XT
Thanks in advance!

hi, i have found an interesting concern about windows xp and HTT.
the HAL is decided on install, you can install with ht enabled, but if you dissable this in the bios later, your pc will still use multiprocessor HAL which will make the pc run hotter..
this is due to hal is non changeable by the operator and is only configured on install of xp.(HTT dissabled= uniprocessor HAL, HTT Enabled= Multiprocessor HAL)
so you install xp with HT on, and later dissable it due to coruption or what ever.. your pc will still run the HAL MULTIPROCESSOR DRIVERS and no longer enter sleep mode where the cpu will slow down at low useage state causing it to constantly consume power, thus heating the cpu more than when HTT is enabled.lol.
but, there is another twist in this little problem.
windows xp (before sp1 was added) installed all the correct HAL drivers for intel processors, BUT SP1 over writes these with the wrong ones!! namely ntoskrnl.exe
and windows have no fix for this, only a work around. which is
1. wait for the new service pack.
2. re-install xp with/ without HTT enabled, which ever you require...
BUT!!! if you have a version of xp, or xp pro with sp 1 on it, it won't matter, because the kernal drivers are wrong..
how i laugh...
now this doesn't answer my problem of "how the hell do i get xp to run HTT, but it does let me know that microsoft are at the bottom of it all...

Windows 7 (64) Blue Screen of Death at Start up after installing iTunes 10

I just got a brand new computer a week ago and decided to install iTunes 10 this evening. The install finished successfully and a message prompted me to restart to complete the installation. So I did. Now my machine will not boot. Each time it does, I get a blue screen of death. Attempting to restore the system fails.
I was able to start Windows in Safe Mode once but I wasn't able to uninstall programs while in safe mode so I couldn't remove itunes 10. And now I can no longer start my machine in Safe Mode.
Has anyone else experienced this? Any ideas to solve it?
Message was edited by: BrianCoker

Windows 7 64 bit core i7
BSOD while updating to iTunes 10 with suspended installation of Apple Mobile Device Support. Network drivers no longer working as a result. Attempted fix by downloading from a different machine and competing install via files transferred over on flash drive. No dice. Attempted removal of iTunes, QuickTime, Apple Mobile Device Support, Apple Application Support, Apple Software Update to see if this would fix. Followed this up with a restart. This seems to have improved matters as system is starting up faster. No dice. Try reinstall network drivers from Sony ViaoCare disk. Installed and restarted. No dice. Next, try Widows 7 Network and Sharing diagnostics. No dice. Next try manual removal & reinstall of network driver using Device Manager, restart. Can't seem to re-install Network Controller. Still trying to solve this.

ITunes Blue Screen of Death when starting

Since iTunes 4.7, half the time when I enter iTunes, I get a stop error 0x00000050 or PAGEFAULT_IN_NONPAGEDAREA
Sometimes when iTunes starts, it will run just fine, but most of the time it just crashes instantly. When I reboot, the computer says its recovered from a serious error, most likely caused by a device driver. I dont know how to isolate the error, because the error result isnt that specific. The only changes I've made to the system before these errors is installing or reinstalling iTunes.
I used to not care as much because I normally use winamp, but now that I recently bought an ipod, I use it a lot more often. Thanks in advance for the help.

hi
i am new here and just on this subject i had run in with similer problams in past as i build pcs for photo video editing co
BSOD (blue screen of deth) normaly occurs due to hardware (or software trying to push hardware ) in your case if i am not wrong cpu or ram or hdd in my cases 1st one i had was cpu was not set at correct voltage and running at higher clock (bad overclocking)
2nd time different machine i had hdd failure (it was secondory drive not os drive)
3rd and recent i had problam with ram 8 gb ddr3 1600 wich motherboard decided to run at 1.4v insted of 1.65v and timing was set to 7-7-7-32 insted of 9-9-9-24.
in short i have seen machines giving bsod jor just having faulty usb connector ( draining power ) to faulty psu but to trace it follow normal comman sence
1 dose it happnes at peak cpu use ?
2 or memory use
3 hdd use
4 did it use to happen before or just happning now if yes then what changed scince last use ? (confliting programs, reg keys)
5 if all above is fine then dose it happen at random times or just under load ?
check bios and compare all the settings with hardware specs that it is configured right
strip pc down to bare minimum and rum it if works start adding other bits till you get problem
in most new build pc (self build) it is down to bios setting or not compatable parts (fully approved by mobo)
old pc over heating confliting software or reg keys ( good clean heatsinks and clean install easiest solution)
vivek

BSOD (Blue Screen of Death) when starting AE CS5

Is anyone else having this problem? It started randomly after a fresh install where AE just crashes to bsod and writes a dump file. After I reboot, I can go into it no problem but it tells me this error.
"After Effects Warning: Error parsing properties list from file C:\users\joe\appdata\roaming\after effects\10.0\AIFEffectCache.xml. It has been renamed to "AIFEffectCache.xml.old for backup. Proceeding."
I've tried disabling OPENGL, defaulted back to default prefs.. No idea why this is happening but it's only in AE. No other application crashes my machine.
Thoughts? Please let me know. Thanks!

hi
i am new here and just on this subject i had run in with similer problams in past as i build pcs for photo video editing co
BSOD (blue screen of deth) normaly occurs due to hardware (or software trying to push hardware ) in your case if i am not wrong cpu or ram or hdd in my cases 1st one i had was cpu was not set at correct voltage and running at higher clock (bad overclocking)
2nd time different machine i had hdd failure (it was secondory drive not os drive)
3rd and recent i had problam with ram 8 gb ddr3 1600 wich motherboard decided to run at 1.4v insted of 1.65v and timing was set to 7-7-7-32 insted of 9-9-9-24.
in short i have seen machines giving bsod jor just having faulty usb connector ( draining power ) to faulty psu but to trace it follow normal comman sence
1 dose it happnes at peak cpu use ?
2 or memory use
3 hdd use
4 did it use to happen before or just happning now if yes then what changed scince last use ? (confliting programs, reg keys)
5 if all above is fine then dose it happen at random times or just under load ?
check bios and compare all the settings with hardware specs that it is configured right
strip pc down to bare minimum and rum it if works start adding other bits till you get problem
in most new build pc (self build) it is down to bios setting or not compatable parts (fully approved by mobo)
old pc over heating confliting software or reg keys ( good clean heatsinks and clean install easiest solution)
vivek

I downloaded a adobe flash update and my computer and after next logon got a blue screen. could only start in safe mode and until uninstalling the flash player could i safe mode with networking. i cannot open any microsoft products now. I get a message

i downloaded an adobe flash update and my computer after next logon got a blue screen. I could only start in safe mode and until uninstalling the flash player could i start in safe mode with networking. i cannot open any microsoft products now. I get a message saying adobe acrobat 10 is not designed to run on windows or uninstall and reinstall it ....but it will not let me uninstall it. What do i do? is this all an adobe issue or a windows problem?? thanks Tim

Hate to suggest this, but you need to ask in the Flash forum. This forum is for Acrobat.

Alternating light and dark blue screen on trying to start up

Today, on trying to restart after an Intego VirusBarrier update, I got stuck with just a blank blue screen alternating light and dark. I still can't restart on my internal drive, but after starting up from the install disc have managed to restart from a cloned OS 10.5.5 on my external drive. When I try to restart from the internal drive I just get the alternating shades of blue screen and nothing else - no error message, no question mark, just the pulsating blue screen - HELP!!!!

Thanks but that wasn't it. I replaced the battery and reset the PMU, still no luck. I've tried hooking up an external monitor still nothing, in doing all of this the person helping and I noticed that when you push the button on front to power up it doesn't light but I'm also not getting a start up chime, only the click of the hard drive then in pushing the button to power it off the light will blink and I think it is shutting down. Any other suggestions.
Thanks

PT880 NEO-FSR Blue screen / Random reboot during games

System Specs:
P4 3.2GHZ EE
eVga 6800 GT
Enermax EG565P-VE FMA V2.0 (24P) 535W PSU
512MB PQI Ram (Fry's) (single channel, single stick of memory)
SBLive! Value Sound
Western Digital 74GB 10k RPM Raptor SATA
BIOS revision 1.9
Drivers installed:
nVidia 71.89
VIA 4-in-1 4.56
XP Pro SP2 (all patches applied)
Problem Description:
About month ago started blue screening with "Bad_Pool_Caller" when playing Everquest2
Troubleshooting steps taken:
1) Tested Memory (memtest86 latest version as of this posting)
   a) 1 stick tested with around 13 errors in Random test #7
   b) 1 stick tested just fine / no errors
RESULT: Removed bad stick of memory
2) Original PSU was 350W POS
   a) Upgraded to Enermax described above
RESULT: Gaming is slightly more stable
3) Verified airflow and temp was ok
   a) I have 4 Case fans moving air front to back
   b) Cleaned all dust covering case fan openings for maximum airflow
   c) I have a stock CPU heat sync and fan from Intel
   d) I have run 1 week without any case cover to avoid overheating
RESULT: No change, Games still unstable
Current Problem: My computer randomly shuts down when playing very processor / memory / disk intense games.
Current Solution: <this is where MSI forum readers come in>
Any help is GREEEEEEEEEEATLY appreciated.

Jeez, i know just what you mean.
I play...er, try to play World of Warcraft. Every 30 minutes or so, i'd get a game crash and a WoW Error Message. The message read, "memory error" which I later learned from their forums was referred to as "memory dump". I figured Blizzard rushed the game out and left some flaws behind in the process. Then the crashes became more and more frequent until the game finally became pretty much unplayable. i then decided to download Microsoft's Memory tester.
About half of all my passes resulted in an error on the LRAND test. Which is bad. I thought, "crap, i must've gotten bad memory" I tested them both individually and found that i could minimize the errors by putting one memory stick in one slot and the other in another slot. It was passable with crashes every 20 minutes or so. However, recently its been getting worse and is near unplayable.
My Friend brought his PC (a bargain basement eMachine) to my house yesterday and I decided to mem test my Corsair memory on his PC. Sure enough 10 passes, with 0 errors. So I ran the larger memory, the 1024s...again 0 errors. I ran his memory for fun 0 errors. Switched PCs. Ran the mem test on HIS memory in MY pc, 5 errors. My Corsairs in my pc, 3 errors. My 1024 in my pc, 7 errors.
I treat my PC properly, I keep the temeratures in check, keep current drivers, buy the best equipment i can afford on my budget, and when i work on it...I always make sure there is no charge in the power supply left over and I make sure and use my anti-static wristband. The problem, it would seem, is the PT880 just isn't memory friendly.

Blue screen error (BSOD) during and after installation of Windows 7

I had to reinstall Windows 7 via the recovery partition. During the installation I kept getting Blue screen errors and even now I am still getting BSOD within minutes. I have no problem in safe mode.
My laptop is a Satellite C650D-12C. I wanted to update BIOS but I can't in safe mode. What should I do next?

Recovery image saved on HDD is tested so everything should be OK with recovery image installation.
What you can try is to use Microsoft installation disc to see if the same will happen again.
If yes, Im afraid you need professional help with this. Notebook has probably valid warranty so the service guys should check this.
Have you created recovery DVD?
BTW: I think BIOS update is not solution. Recovery installation must work with this original BIOS version.

Blue Screen right after the start up logo

Hi. My first post - I've looked at other blue screen posts on here, but mines I think might be simplier to identify compared to other ones I seen involving flickering off the apple menus etc. (fingers crossed)
Last night I was archiving a lot of mpegs (and other video files archiving through winzip) to save room so that I'd enough room to allow the use of my new Lacie DVD rewriter (as it needs a lot of free space to use) after half an hour of archiving, I decided to watch a DVD instead and was watching on the DVD Player, once I got pretty tired, turned it off via the power instead of actually exiting the DVD player then going to "shut down" (lazyness on my part).....
This afternoon I go to turn on my Mac - I get the "Mac OX" start up with the blue progress bar at the start - no problems there, everything seems to be OK... Then after the Mac start up logo has gone, the whole screen is blue... I can still move around the mouse etc.... I have tried a restart with the command R+P etc... and tried to hold down the "C" button while having the instalation disc in after a restart to use one of the utility check things on the disc but it doesn't seem to even launch the disc.. It just starts as normal with the mac loading logo thing,, then straight onto the blue screen.... I have a lot of CD lists, and a lot of crucial info I need so replacing it isn't really an option although it would be no trouble if I didnt have anything needed on there.. Any help is greatly appreciated

I solved the problem yesterday (well a friend of mine did)
1) He started up the Mac Mini WITHOUT the install disc in, and as the Mac OX launch screen came up - he inserted the disc then
2) This allowed the reader to read it at this point (which is more ideal and suited) rather than the start of the power up..
3) You will hear the reader reading the disc, making noise etc. by then you push the "C" button, and the options came up for picking a language, once I did it went on to the usual utilys on the disc 1 installation disc
4) Unfortunatly I re-installed the whole lot (whcih took around 20 mins to complete) which earesed all the data
5) Good thing though was it worked after it, all fresh, and saved me a very high charge of 95.0GBP to fix it, and possibly more for any kind of data retrieval I wished to have saved
ps) it might also work by pushing the "C" without the disc. But the way I was doing it before was that I put the disc in, switched it off, and restarted with having the disc in right away to think it was the more precise way to perform what was needed, however it was not

Blue screen on Z10 during start up

Similar Messages

Maybe you are looking for