Blue Screen! Please Help!

I get blue screened sometimes when audio is trying to be played. 
Locale ID: 1033
Additional information about the problem:
  BCCode: a0000001
  BCP1: 0000000000000005
  BCP2: 0000000000000000
  BCP3: 0000000000000000
  BCP4: 0000000000000000
  OS Version: 6_1_7601
  Service Pack: 1_0
  Product: 768_1

Hi,
In order to assist you, we will need the .DMP files to analyze what exactly occurred at the time of the crash, etc.
If you don't know where .DMP files are located, here's how to get to them:
1. Navigate to the %systemroot%\Minidump folder.
-- %systemroot% is the environment variable for your Windows directory. For example, C:\Windows.
2. Copy any and all .DMP files in the Minidump folder to your Desktop, create a new folder on the Desktop to put these .DMP files in, and then zip the folder. You can then either use a 3rd party tool such as 7-Zip/Winrar, or you can use Windows'
default method of zipping folders.
Compress and uncompress files (zip files).
Please note that any "cleaner" programs such as TuneUpUtilities, CCleaner, etc, by default will delete .DMP files upon use. With this said, if you've run such software, and your Minidump folder is empty, you will need to allow
the system to crash once again to generate a crash dump.
3. Upload the .ZIP containing the .DMP files to Onedrive or a hosting site of your choice and paste in your reply.
Preferred sites: Onedrive, Mediafire, Dropbox, etc. Nothing with wait-timers, download managers, etc.
4 (optional): The type of .DMP files located in the Minidump folder are known as Small Memory Dumps. In %systemroot% there will be what is known as a Kernel Memory Dump (if your system is set to generate). It is labeled MEMORY.DMP. The difference
between Small Memory Dumps and Kernel Memory Dumps in the simplest definition is a Kernel Memory Dump contains
much more information at the time of the crash, therefore allowing further debugging of your issue. If your upload speed permits it, and you aren't going against any strict bandwidth and/or usage caps, etc, the Kernel Memory Dump is
the best choice. Do note that Kernel Memory Dumps are much larger
in size due to containing much more info, which is why I mentioned upload speed, etc.
If you are going to use Onedrive but don't know how to upload to it, please visit the following:
Upload photos and files to Onedrive.
After doing that, to learn how to share the link to the file if you are unaware, please visit the following link -
Share files and folders and change permissions and view 'Get a link'.
If your computer is not generating .DMP files, please do the following:
1. Start > type %systemroot% which should show the Windows folder, click on it. Once inside that folder, ensure there is a Minidump folder created. If not, CTRL-SHIFT-N to make a New Folder and name it Minidump.
2. Windows key + Pause key. This should bring up System. Click Advanced System Settings on the left > Advanced > Performance > Settings > Advanced > Ensure there's a check-mark for 'Automatically manage paging file size for all
drives'.
3. Windows key + Pause key. This should bring up System. Click Advanced System Settings on the left > Advanced > Startup and Recovery > Settings > System Failure > ensure there is a check mark next to 'Write an event to the system
log'.
Ensure Small Memory Dump is selected and ensure the path is %systemroot%\Minidump.
4. Double check that the WERS is ENABLED:
Start > Search > type services.msc > Under the name tab, find Windows Error Reporting Service > If the status of the service is not Started then right click it and select Start. Also ensure that under Startup Type it is set to Automatic rather than
Manual. You can do this by right clicking it, selecting properties, and under General selecting startup type to 'Automatic', and then click Apply.
If you cannot get into normal mode to do any of this, please do this via Safe Mode.
Regards,
Patrick
“Be kind whenever possible. It is always possible.” - Dalai Lama

Similar Messages

  • Desktop will not load, stuck on blue screen -- please help!

    As I can see, many other Mac users have encountered the same problem that I now have: the dreaded ‘blue screen of death’. About a week ago, any internet browser that I tried to open (Safari, Firefox) would freeze after loading its home page, and tell me that the application was not responding. After force quitting and restarting each program a couple of times, with no positive response, I decided to restart my computer to see if that would do the trick. Upon booting up, it then started the same sequence that it is still doing now: first a grey screen will briefly show, then a white screen with the apple logo and a turning dial beneath it, followed by a blue screen which will show a window that says “Starting Mac OS X” with a progress bar beneath it, which will fill to various points (sometimes only 1/8 of the way, while other times it fills completely), but it always leads me to the same screen – solid blue with a black arrow that will occasionally be replaced with a turning dial, only to go back to the arrow again. I am using a PowerBook G4 with the Tiger version of OS X. No applications were running whenever I first decided to restart my computer, and to my knowledge, all software and security patches were up to date and fully installed.
    I’ve researched and tried every possible option that I’ve come across, listed below with the results they yielded (if any):
     Holding the Command/Option/P/R keys upon startup (screen stays blank, and the computer continues to ‘chime’ until I release the keys. I have allowed it to chime a couple of times before I stop holding the keys, but it always leads me back to the same blue screen)
     Holding the Shift key upon startup (leads me to a screen that has an icon of my hard drive and two arrows. Clicking the left arrow does nothing, the hard drive icon does not respond to being clicked, and the right arrow starts the loading process which again ends with the blue screen)
     With the first OS X Installation disc that came with my computer inserted into the disc drive, holding the C key (nothing happens; sequence as normal)
     With the first OS X Installation disc that came with my computer inserted into the disc drive, holding the Option key (same results as holding shift key with no disc)
     With the first OS X Installation disc that came with my computer inserted into the disc drive, holding Option/Command/Shift/Delete (a grey screen appears with the icon of a folder, a question mark briefly flashes before being replaced by the two-toned blue face Mac logo. After continuing to hold the keys with this folder and face on the screen, I get no response, so release the keys and the computer continues to enter the white screen-blue screen sequence)
     Holding the Command/Option/O/F keys upon startup (a white screen appears, and following advice I have seen on other forums a type ‘reset-nvram’, then return, then ‘reset-all’, then return. The computer reboots and the sequence continues as usual. I have also tried holding the Command/Option/P/R to reset the PRAM immediately after leaving the white Open Firmware screen, allow the chime to sound a couple of times as before, but still I get no results)
     While on the blue screen, pressing the Command/Shift/Q keys (alas, I am the only user on the computer, so I cannot try to remedy my problem by signing into another account. From the screen the appears, I can either shut down, restart, or put my computer to sleep, or enter my password which leads me back to the same blue screen again)
    I apologize in advance if I’ve included a lot of extraneous information, but I just wanted to cover the options I’ve already explored so as not to waste your time if you had any of these in mind. I’m going to post this on a few different forums just to make sure I have all my bases covered, but anything you have to offer in the way of suggestions would be greatly appreciated. If you could post your advice in layman’s terms that would be even more helpful; I’ll probably need exact, step-by-step instructions if required to start my computer in ‘safe mode’ or anything else an average user would not be familiar with. I know this is a lot to ask, so I thank you in advance for taking the time to read through this and offer any solutions that you may have.

    Hi amnicolekidman, and a warm welcome to the forums!
    Although you don't specify your Mac, it sounds like you have real HW problems, likely the HD.
    Tough without a Tiger Disk, but try fsck...
    To use fsck, you must run it from the command line. Unlike using your mouse to open an application to do something, you'll need to type a text command at the prompt (#) to tell fsck what to do. The Terminal application (/Applications/Utilities) and single-user mode are two examples of command-line interfaces in which you can type such commands. To use fsck:
    1. Start up your computer in single-user mode to reach the command line. Hold CMD+s keys down at bootup.
Note: If necessary, perform a forced restart as described in the Emergency Troubleshooting Handbook that came with your computer. On desktop computers, you can do this by pressing the reset/interrupt button (if there is one) or holding down the power button for several seconds. On portable computers, simultaneously press the Command-Control-power keys. If your portable computer doesn't restart with this method, you may need to reset the Power Manager.
    2. At the command-line prompt, type /sbin/fsck -fy
    3. Press Return. fsck will go through five "phases" and then return information about your disk's use and fragmentation. Once it finishes, it'll display this message if no issue is found:
** The volume (nameofvolume) appears to be OK 
If fsck found issues and has altered, repaired, or fixed anything, it will display this message:
*** FILE SYSTEM WAS MODIFIED *** 

Important: If this message appears, repeat the fsck command you typed in step 2 until fsck tells you that your volume appears to be OK (first-pass repairs may uncover additional issues, so this is a normal thing to do).
    4. When fsck reports that your volume is OK, type reboot at the prompt and then press Return.
    http://docs.info.apple.com/article.html?artnum=106214
    Then Safe Boot , (holding Shift key down at bootup), off the HD & use Disk Utility from there to Repair Permissions, reboot once more.

  • I tried updating my iPod touch 4th gen and now the screen is bright blue or flashing white and black lines.ive tried the whole home and power button thing but it only brings up the apple icons then goes back to the blue or other screen.please help?

    I tried updating my iPod touch 4th gen and now the screen is bright blue or flashing white and black lines.ive tried the whole home and power button thing but it only brings up the apple icons then goes back to the blue or other screen.please help?

    This has worked for some others.
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       

  • My iphone 4 turned off and now it won't turn back on I've tried charging it and plugging it into my computer but it's still a blank screen. please help me.

    my iphone 4 turned off and now it won't turn back on I've tried charging it and plugging it into my computer but it's still a blank screen. please help me.

    Intel-based Macs: Resetting the System Management Controller (SMC)

  • To open "Java Preferences," you need to install a Java runtime, but you are not connected to the Internet. I have tried links that people have put on other discussions but all i get is a black screen please help!!

    To open “Java Preferences,” you need to install a Java runtime, but you are not connected to the Internet. I have tried links that people have put on other discussions but all i get is a black screen please help!!

    Try this link, warning, it's straight to download mode:
    http://support.apple.com/downloads/DL1421/en_US/JavaForMacOSX10.7.dmg

  • Choppy video on big screens  PLEASE HELP!

    I've noticed that the videos that I have exported from CS3 are very smooth when played on a computer screen and average size tv screen, but are very choppy if played on a large TV or projected on the wall.  Is there a way to remedy this?  Please help!
    Drew.

    I think I figured out the issue.  Thanks for all your advice.  I'll repost if I have any other problems.
    Drew.
    Date: Wed, 24 Jun 2009 10:24:22 -0600
    From: [email protected]
    To: [email protected]
    Subject: Choppy video on big screens  PLEASE HELP!
    Drew,
    How is the large-screen projector connected, via a set-top DVD player to it, or by a computer connected to it? If it's via a set-top player, is it the same one used for the small-screen TV, or a different one? What is the make and model of the set-top player(s)?
    Also, what DVD media was used, and what was the burn speed used to create the DVD? Was this authored in Encore, or with some other authoring application?
    Good luck,
    Hunt
    >

  • After trying to update to ios6 my ipod touch will go from logo to blue screen, any help?

    after trying to update to ios6 my ipod touch will go from logo to blue screen, any help?

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar

  • My ipod touch 4g turned off and wont turn on again because it is frozen on the apple screen. please help!

    My ipod touch 4g turned off and when i try to turn it on it says its not charged. so i charge it and the apple screen comes up but stays frozen like that for a really long time, and then it just goes back to the "needs to be charged" screen. please help!

    - First try resetting the iPOd. Nothing will be lost.
    Reset iPod touch:  Press and hold the On/Off Sleep/Wake button and the Home
    button at the same time for at least ten seconds, until the Apple logo appears.
    -Next connect to a computer and restore the iPod if theiPod appears in iTunes.
    - Next see if placing he iPod in recovery mode will allow iTunes to see the iPod so you can restore the iPod.  For recovery mode see:
    iPhone and iPod touch: Unable to update or restore

  • TS3212 im running XP with all firewalls and pop up blockers off. Ive tried using chrome, firefox, and IE. no download starts and im redirected to the thank you screen, please help!!!!!!!!!!!!!!!

    im running XP with all firewalls and pop up blockers off. Ive tried using chrome, firefox, and IE. no download starts and im redirected to the thank you screen, please help!!!!!!!!!!!!!!! Ive read all related articles, aswers and solutions but cant seem to get tunes to download?

    Ive tried from my PC, and ive tried from another which runs Vista. Both pc's were tried using firefox, IE and chrome,and both had firewalls off and pop-ups allowed completely (I basically turned off all security). I checked for 3rd party software which could also cause "blocks" but all 3rd party software were eliminated. I even tried stopping and restarting windows installer in "computer management; services, services". Still no luck..... This is the first time that ive struggled downloading Itunes. The reason im trying to download itunes is because im attempting to restore my iphone 4.....

  • I have an iPhone 5 and recently when I try to copy and paste the app freezes and returns to the home screen please help.

    When I try to copy paste my app freezes and returns to the home screen please help.

    Try resetting ...
    Press and hold the Sleep/Wake button and the Home button together for at least ten seconds, until the Apple logo appears.
    If that didn't help, tap Settings > General > Reset > Reset All Settings
    Then restart your iPhone.

  • TS1363 my iPad air cannot reconnect to my computer and it has  the iTunes logo with a plug picture on a black screen, PLEASE HELP!!!!

    I was updating my iPad air  and in the middle of update it suddently cannot reconnect to my computer and it has  the iTunes logo with a plug picture on a black screen, PLEASE HELP!!!! I did try steps from http://support.apple.com/kb/HT1808?viewlocale=en_US    - IT DOES'N WORK!

    Yes, that is your only option.Yes.  You have to restore.
    Try the following if you have difficulty restoring.
    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iPod fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - If still not successful that indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar

  • I brought an iphone 4 factory unlock and it is linked with an icloud id of previous owner, i dont even know id of icloud , 1 week ago i restore my iphone 4 n got stuck in activation screen, please help me out please?

    i brought an iphone 4 factory unlock and it is linked with an icloud id of previous owner, i dont even know id of icloud , 1 week ago i restore my iphone 4 n got stuck in activation screen, please help me out please?

    If you are trying to activate an iPad or iPhone and it is asking for the original owners Apple ID and password, you have encountered the Activation Lock. This is a security feature that prevents thieves from setting up and using a stolen or lost iPad or iPhone. You have no alternative. No must contact the original owner to get permission to use the device. If you cannot contact the original owner return the device to where you bought it and get a refund. You will never be able to activate the device and no one can help you do it.

  • I repaired a cracked iphone 5c screen now I have a black screen with a vertical blue line on the left hand side of the screen. please help!!

    Hi all,
    Please help, I repaired an iphone 5c and have now tried two different lcd screens on it but all I get is a black screen or a black screen with a vertical blue line on the left hand side of the screen. I definitely have the cables connected properly etc and before I repaired it the phone had a cracked screen and there was a picture on it.
    I have tried hard reset and nothing. I have tried connecting to iTunes but it asks me to confirm on the iPhone which I can't do as there is nothing on the display.  I have tried randomly pressing all over the screen but it doesn't work. So I can't even try restoring it on iTunes.
    Please help any advice will be appreciated! I successfully have repaired iphone 4's and iphone 5 before but this is the first iphone 5c.
    Thanks.

    purplesunshine3 wrote:
    Please help any advice will be appreciated! I successfully have repaired iphone 4's and iphone 5 before but this is the first iphone 5c.
    Thanks.
    Since you were successful the last two times, I'm sure you will figure it out.

  • Blue startup screen stops @ blue bar, please help

    Hello, I woke up to my 17" pb (os 10.4) and the screen was black unix style. I figured I would restart and everything would be fine. When I restarted I got to the blue screen with the blue bar. The bar goes all the way but stops there. I started in Single User Mode and ran fsck and it comes back drive "ok". I can't start in safe mode, it hangs at the same place. I can start it in "target mode" using another mac and my files are all there. I have install disks and after I get to choose "english" the message "you can not use this disk on this computer"
    Please help I have got to my wits end.
    Count

    Hello there
    Try Repairing Disk Permissions from the Tiger Install DVD... for that...
    1) Insert the Install DVDs in DVD ROM and Restart your Mac
    2) While Booting Hold down the C Key
    3) After the Boot Select your Appropriate Language
    4) Dont Continue the Installation Window
    5) On the *Top Menu Bar* Select Utilities>Disk Utilities, This will open the Disk Utilities Windows with List of Drives attached
    6) Select the System Drive and Click the Tab First Aid,
    7) Click the Verify Disk Button. If this Gives some Errors then Click Repair Disk.
    8) After Repair Disk Click Verify Disk Permissions. On Errors Click Repair Disk Permissions and Repeat the Process Until there is NO Error...
    9) Quit Disk Utility and Quit the Installation Process.
    10) Cancel, Restart & Shutdown will be Offered. Click Restart
    11) Boot the System Normally.
    I hope this will solve the issue
    Cheers
    Tanx

  • Imac g4 blue screen need help!!

    hello,
    i have an imac g4 1,250, 20" flatpanel, it power's up i hear a chime the screen lights up but seems dark blue, there is no operating system on it i have a cd mac osx 10.1.3 first of all will this install on the imac, and if so can you please tell me how, i have a wireless keyboard and mose from apple, i have a d-link bluetooth adapter, is this what i need??
    thats it for now, please help
    thank you
    keyro35
    imac g4   Mac OS X (10.1.x)  

    Mr Totes is quite right, the 10.1.3 disk will not work. Contact the original seller for the disks that came with the machine. Among other things, they can be used to troubleshoot problems with the machine should they arise (chances are they won't but they can be useful, especially in detecting if the RAM usable and other factors). They are not rightfully his when he sells the machine and ONLY licensed for use with that machine. If he lost the disks, he should call AppleCare for replacements.
    Once you have identified which iMac you have from my FAQ:
    http://www.macmaps.com/macosxnative.html#IDENTIFY
    You’ll have the knowledge necessary to call AppleCare and request the disks yourself if you can’t reach the seller. This knowledge is also important later on.
    If you can reach him, the number he should contact is one from his own country.
    In Canada, the number for AppleCare is
    1-800-263-3394
    In the U.S. it is:
    1-800-APLCARE
    Overseas numbers are here:
    http://www.apple.com/contact/phone_contacts.html
    Make sure you get the correct RAM according to the spec database based on the Mac model identified above:
    http://www.info.apple.com/support/applespec.html
    and update it to at least 512 MB if not 1 GB. The installation if necessary is best done by an authorized service technician, especially on the iMac G4 models since those RAM slots tend to be quite fragile. Run the hardware test that came with the restore disks. Some come with their own Hardware Test CD that is silver colored, while others come with a volume like the Powerbook, except labeled iMac restore disk. The restore disk instructions for the Powerbook apply to iMacs as well:
    http://docs.info.apple.com/article.html?artnum=86287
    If the hardware test appears OK, you’ll be ready to run the Tiger installation with an erase and install:
    http://docs.info.apple.com/article.html?artnum=301270
    And everything then should work.
    Good luck, and let us know if you get stuck along the way!
    In the future always be careful when buying used and refurbished Macs, by following these instructions in my FAQ:
    http://www.macmaps.com/usedrefurbished.html

  • I have the dreaded blue screen need HELP????!

    I was just downloading the updates and then the computer restarted and the screen is blue, mouse still works. I was looking at other articles for bluescreen but it was for an installation of Leopard problem. The program I have in my computer is 10.2.3.Somebody wrote to hold down control and s. it took me to single user type screen that looked like MSDOS. I put /sbin/fsck -fy which they stated to do. I pressed enter it said something but I forgot what. I restarted the computer and now when it is loading up it stops when it says waiting for application services. I think I dug myself in a bigger whole when I typed that stuff in the MSDOS type screen. SOMEBODY PLEASE PLEASE HELP ME OUT OF THIS WHOLE?

    Hello Again cosmikx!
    Also refer to My Reply, in your other related Topic here Stuck on Searching Directory Services while loading Please HELP! URGENT.
    ali b

Maybe you are looking for

  • IPod Classic updating ratings and not play counts in iTunes

    I am currently using an iPod classic purchased in 2010 with iTunes 10.5.3.3.  however I encountered the same issue on 10.6.1 which made me think that if I downgraded that it would solve my problem but it hasn't. Here is my problem. Over the past two

  • No apps home screen, please.

    I, for a moment, had a very nice home screen free of any apps whatsoever. That is until I downloaded another app then my clean, app free home screen was replaced with what was on page 2 screen. Full of apps... What I had done to get all the default a

  • Make two tables in the same space of template

    Hi, i made a pivot table with a dataset, i need add a new column or another table beside that pivot table, but doesn't work or generate a error. how can i make two tables of diferente dataset in the same rows in a template? thanks a lot Edited by: us

  • Select on dictionary

    Hi, on 11g I have the follwing error . What is wrong with syntaxe : SQL> GRANT SELECT ON ANY DICTIONARY TO myuser; GRANT SELECT ON ANY  DICTIONARY TO myuser GRANT SELECT ON ANY DICTIONARY TO myuser ORA-00903:                         *Thanks.

  • Getting the default messaging app back

    i have a nokia e5-00. .bought it a few years back. .a month ago, i installed sms2.0 live app as the msging app. .it's done fine so far nw, bt i ws trying to get the default messaging app back but cant find a way to do so. There is no option to uninst