Blue screen when booting Win7 on new board

Hi,
I'm new to the forum, and I'm hoping I'm posting this in the right section.
I recently built a new system. The parts are as follows:
OS
Windows 7 64 bit Home Premium
Mainboard
MSI 970A-G45 AMD 970 Socket AM3+ Motherboard
RAM
Patriot 8GB Divison 2 DDR3 1600MHz CL9 (2x4GB)
Video
GIGABYTE GeForce GT 220 DDR3-1GB, HDMI OC
CPU
AMD FX-6100 X6 3300MHZ 14MB 95W AM3+
I put the system together, and tried installing Windows as normal. Boot from dvd, create a partition, format, install. It would get as far as one of the last restarts and go to a black screen saying "Starting Windows" and remain there for over an hour before I gave up and restarted.
I then tried installing drivers from the mainboard cd, but there were none that pertained to my system (weird I thought, because the cd came with the mainboard should have some relevant drivers). according to Windows.
I then tried a few different reinstalls with partitions of different sizes and still Windows would hang.
I took out everything but one stick of ram(which I left in dimm slot one) and the video card (since the board has no integrated video).
It would still hang. So I decided to try the BIOS and disable some options that I had read about online from people with similiar problems (and different parts). I went to set the board's SATA mode to compatible, but it only had Disabled, IDE, AHCI, or RAID. I tried each (except disabled). I could get farther with AHCI, actually back to the "Completing Installation" and progress bar, but it would still hang. I then tried turning off USB controller with no luck, disabling usb legacy support with no luck, and finally disabling USB 3.0. That let me get further. I finally tried the different modes. I tried ECO mode with no luck (skipped Standard mode since I had been trying it) and finally tried OC Genie II mode. Windows installed then.
I put it back on Standard mode and it wouldn't load. It would either reboot randomly, hand forever, or give me a blue screen relating to a "secondary core that was not responding." It will start windows only in OC Genie II mode, with USB 3.0 disabled and the SATA set to AHCI.
Does this sound like a bad CPU, board, ram issue, BIOS, or what?
The only blue screens I got were related to a secondary core not responding. It would only do this with SATA set to RAID or USB 3.0 turned on from what I can remember. The PC is at home, and I am currently at work. If there is any information I can provide to help diagnose my troubles let me know and I'll get it once I am home.
I mainly want to know if it sounds like I have a bad part and why it has to be in the OC Genie II mode with USB turned off and AHCI on.

Hello!
Lately Patriot seems to be more successful with their selling than with their information campaign. Increase memory voltage to at least 1,65 volts.
I always recommend as simple a system as possible when installing Windows, makes possible troubleshooting much easier. In the simplest terms, one of each component/device and no extra cards or USB devices.
We would also like to know name and model of the PSU.

Similar Messages

X200 with OCZ ssd blue screens when booting from docking station

The x200 blue screens when booting from the docking station. If I take the laptop out of the docking station to boot and then dock once booted the laptop is fine.
The issue started happening when you I upgraded the laptop form xp to windows 7 and installed an OCZ vertex 2 solid state drive.
I have tried updating the firmware on the ssd using this utility
http://support.lenovo.com/en_US/detail.page?LegacyDocID=MIGR-69806
The program showed that my ssd was running firmware version 1.29 and did not need to be updated.
I have also tried updating the x200 to the latest BIOS. Nothing seems to work.
Any ideas or suggestions are greatly appreciated.
Solved!
Go to Solution.

you need to modify a registry value before going from AHCI to IDE. (or viceversa).
http://www.ocztechnologyforum.com/forum/showthread.php?69682-Change-from-IDE-to-AHCI-after-Installat...

Blue screen when boot from cd and cannot open diskutil

HEllo
i have problem my macbook pro 2011 i7 when i boot up after apple logo display white screen , when i boot from cd display blue screen , i'm format my ssd but same problem
when i'm try open diskutil with CMD +R open Recovery network
Any body can help me ?

when i'm try open diskutil with CMD +R open Recovery network
I don't understand what you are talking about.
Startup - Blue Screen
Startup - Gray, Blue or White screen at boot, w/spinner/progress bar
Startup Issues - Resolve
Startup Issues - Resolve (2)

Blue screen when booting from USB drive in UEFI mode (2013.07)

SOLUTION for me was to update the firmware on my ASRock mb as thatu pdate changed the EFI software (by American Megatrends) version from 2.00 to 2.31. However, other users are still experiencing the blue screen.
SHORT VERSION
When I try to boot Arch Linux 2013.07 with an USB drive in UEFI mode (for installation), I get a blue screen (which is rather a literal description and not a hint towards the old Windows' one) with the message
Failed to install override security policy (14): Not found
LONG VERSION
I made an USB installation media (product: Intenso Rainbow) by following this advice on the wiki.
I used the july release of Arch for that. First of, after installing the image to the USB stick I found that I needed to correct the label in the archiso-x86_64.conf file to ARCH_201307 (or was it the label of the usb stick, can't remember right now). (Pretty sure it was the same problem with "Linux Live USB Creator" which I used 3-4 months ago...)
After doing that, I rebooted and selected the entry
UEFI Intenso Rainbow
from this list of entries:
SATA HDJ ... something (the hard drive where Win 7 64 bit is installed with all programs)
SATA something (hard drive which only contains data)
Windows Boot Manager
USB: Intenso Rainbow
UEFI: Intenso Rainbow
It went to a blue screen with a message in white text saying
Failed to install override security policy (14): Not found
Below that was an OK button which had a black rectangle over it.
After I experienced the bluescreen, I tried booting the
USB Intenso Rainbow
entry and the boot process then worked fine, I got to that Arch menu where I could choose
Boot Arch Linux (x86_64)
Boot Arch Linux (i686)
Boot existing OS
Run Memtest...
and so on...
But just to make sure, I then did the check for UEFI mode according to this and only saw a folder acpi and ... something else I can't really remember, but it definitely was not efi. Thing is, I needwant to boot into UEFI mode as I have Win 7 already installed in UEFI mode.
Some info about my motherboard: it's from ASRock and is called H67M. The BIOS is dated to 2011-10-26 and is version 1.7.
So far, I only found a mention of the problem here at superuser.com.
Last edited by jones (2013-07-15 07:15:18)

Ok then, so this thread has also become about the blank screen problem when booting (in this particular case, Arch 2013.06 since 2013.07 seems to be worse).
srs5694 wrote:Typically, you adjust kernel boot options using your boot manager or boot loader. In GRUB, you hit the "e" key to open an editor. In rEFInd, you hit F2 or Insert twice. I don't recall offhand what key does the job for gummiboot (which I'm pretty sure the Arch installer uses), but I'm certain it's got the feature.
You are right. Thanks. I realized I had the gummiboot config right in front of me all the time. It's the file 'archiso-x86_64.conf' in \loader\entries (on Windows).
An addendum: I think the USB: Intenso Rainbow boot option takes me into a GRUB menu. Hitting 'e' in this "big" and fully designed menu didn't do anything IIRC. Hitting 'Tab' did the trick to get into editing the boot command line.
Hitting 'e' worked in the gummiboot menu though.
So I tried booting with the following options (also by combining some of them)
nomodeset
acpi_backlight=vendor
radeon.modeset=0 (I have a Gigabyte 7870 card in this desktop machien)
i915.modeset=0
but it did not help.
To be rather safe than sorry: I should mention that there are two grey-ish bars visible on the top and bottom of the screen after I try to boot the first entry, Arch Linux archiso x86_64 UEFI USB. Always has been with those two older Arch version (2013.05+2013.06). I also found another thread where one user talks about using the VGA port of the monitor, which I am currently not, I am using the DVI one, so that's worth a try too. EDIT It did not help either. What I did was setting the primary graphics adapter in the UEFI north bridge configuration menu to 'onboard' which worked immediately when rebooting (I hit the button labeled "Source" on my monitor and it showed it is using the "Analog" mode), but the problem just stayed the same. Adding aforementioned boot options or a combination thereof did not change anything.
Thanks for the e-mail addresses, I sent one to James Bottomley.
Last edited by jones (2013-07-07 11:12:05)

Macbook will not boot. Locked hard drive. Blue screen when booting

Hi, my little brother decided he wanted a few files off of my mac book, so he went to settings>sharing>file sharing and added my only hard drive to the list and tried removing everyone but his name and password thinking it would only effect people trying to log into my hard drive, not actually me on my computer alone trying to boot mac osx from it.
He came crying to me telling me he paniced because he saw a locked icon on my hard drive and couldn't do anything, so tried to restart the macbook and now i just get a blue screen and nothing happens when i try booting it.
Right now i'm thinking i gotta archive and reinstall from booting the osx disk, but i'm affraid it'll just apply the same settings again and keep me locked out. I need files off of my hard drive since i'm in school and have several assignments that i have not backed up at all.
Any help would be greatly appreciated

after searching the forums deeper i found the solution. it's now working. you may delete this thread.
http://discussions.apple.com/thread.jspa?messageID=2087835

HELP! Can't get past the blue screen when booting up...

Hi,
Please can anyone help. I've searched the web and found possible causes of the fault but not a solution....
I upgraded my hardrive, used SuperDuper! to clone my drive, make it bootable etc then transferred the new drive to my Macbook Pro.
Now, every time a boot it up with my account set to auto login, it freezes on the blue screen. It doesn't go any further.
I've entered in Safemode, added a second 'Admin' account and set the login preferences to show the login window. Which allows me to log in as the second account holder. This works in normal mode, and then once logged in, i can switch accounts to my normal account.
This is the only way i can use my account.
I've looked at the fonts and used 'Font Doctor' to fix them. I can't seem to be able to fix my preferences (com.apple.programename.com), Onyx doesn't seem to fix it and i've no way of finding out if a preference file is causing this myself.
I've also done an OSX reinstall then software update. No good!
I've tried so many things as advised by various people online but it's clear to me that it's a) Account issue, b)Startup issue once logged in.
Please can anyone advise? I'm assuming that it's only related to my account, and that it's to do with the startup of the account...
I have OS X 10.6.8 on a macbook pro unibodied (1st gen, Aug 2008).

Thanks. However, i found a lot of errors so i chose not to act on what i didn't know.
This is how i managed to work it:
Activate ROOT user
Login as ROOT
Update to latest OSX 10.6 (was just released)
Restarted
Logged in as main user... worked fine. Not sure what i did but it worked.
I had tried all other methods but non worked...

Why does my mac book pro have a blue screen when booting up for a second just before the login screen

When turning on my Mac Book pro before it get to the log in screen it has a blue screen for a couple of second the goes to the login sreen. It seams to take some time to complete the login to my computer.
can anybody give me some help with this problem.
Thank you

The cable connections have (so far) solved this problem for my situation. Even though the monitor's DVI cable was firmly connected to the mini Display port connector, when I touched it the attached monitor would go 'blue' or lose its connection entirely. After disconnecting and reconnecting this junction the monitors would still take a hit on touching the connection. I also checked the connection of the mini Display port connection to the graphics board and could not push it in any further. However, after a second go-round I unplugged this connection to the board and reconnected it. I am certain it was fully inserted the first time. But, connection contacts can oxidize over time and sometimes it may just need to be disconnected and reconnected to 're-wipe' the connections. This effectively cleans them at the point of contact. So in my case I'm thinking it was the connection age that was an issue more than a 'loose' connection. Either way, I haven't had this issue for the past two weeks.

Stuck on blank blue screen when booting- HELP!

When I boot up up I get the normal grey screening with spinning pin wheel, but then it goes to a blank blue screen and just hangs there. Tried resetting the PRAM but didn't work, also want to boot from the install cd but I can't the cd drive door to open from the keyboard button.
Help please!

Hold the mouse down during startup to get the drive to open.
Or use the OPTION key to stop at boot selector and do it then.
I would make sure to have a working bootable backup of your drive at all times, and an emergency boot drive/partition.
What might help:
Boot from another drive. Turn off journaling. Repair drive.
Once at Finder desktop, delete the caches folders on your main drive.
/Library/Caches
/System/Library/Caches
/System/Library/Extensions.mkext
If the repair was "successful" and DU is not 100% certain to see and fix all possible errors, for that Disk Warrior or TTPro would be needed.
At the least, repair from current DVD of OS X, or SAFE BOOT, or Single User Mode and run FSCK.
Then do Safe Boot from your main drive.
But do install OS X to another drive to work from.
PRAM only affects settings. If you mean PRAM/NVRAM from cold boot, that would help with corrupt nvram due to hardware changes.
If you have or suspect a corrupt boot drive I would invest in Disk Warrior and/or TechTool Pro/Deluxe to use along with Apple Disk Utility.

IMac will only safe boot (blue screen when not safe booting).

A buddy asked me to help with his Intel based iMac. It was giving a blue screen when trying to boot up (and an odd cursor along with the blue screen). The cursor moves around the blue screen but looks like two cursors. One cursor is a normal arrow pointer, the second is a rectangle about .25 inch wide and 1 inch tall made up of about 10 horizontal lines.
I'm very familiar with Macs and OS X and was sure it was probably a messed up preference file (most likely login preference). It wasn't.
Here's the odd circumstances:
I have an intel macbook that if I use firewire target disk mode I can boot just fine off his iMac.
His computer will not boot off my Macbook that is in firewire target disk mode.
We cloned his hard drive to an external firewire hard drive (using Carbon Copy Cloner), my Macbook boots off it just fine, his iMac will not.
He's been wanting to go to Leopard so we upgraded his computer (did basic upgrade), but it still blue screened (with odd cursor).
Then we did an erase and install. Still no difference in behavior.
I would almost be convinced that it's a hardware failure, but it will safe boot every time.
Here's what happened when it died. His son was playing a Star Wars game (I'm not sure which one). The kid was in the middle of the game and paused it when it was time for dinner. When the kid went back to play, the computer was frozen. They tried everything to unfreeze it and ended up powering it down. Started the blue screen ever since.
He's going to contact Apple (it's barely still under it's warranty) but I was hoping someone here has another idea what it could be.

I found this topic while trying to find an answer to my problem. It seems we have a similar thing going on with our imacs (although mine is a much older crt imac). I'll copy and paste my original post from the imac board :
Hi
I received a free imac snow (G3 500mhz) from someone. He told me it was broke, and someone told him the logic board needed to be replaced.
I brought it home and tried to start it up. It gave the '?' folder icon. I started up from an OS 9.1 cd - Success! Except there was no HD. I opened it up and discovered that the HD wasn't connect to the ATA cable. I was able to start up to a previously installed Tiger. Except once it booted it would quickly freeze - the mouse pointer would turn into a scrambled beach ball (very strange) and wouldn't move.
I did some research and found about the potential problem with OS X and the imac's firmware. I restarted from the 9.1 CD and installed that OS. Everything seemed fine and was running ok (from my limited time on it). I then DL'd the latest firmware for the imac (4.1.9.) and tried to run it. Except the message came up that the latest firmware had already been installed. So i guess thats a good thing. I don't have to worry about firmware being a problem.
So i did a zero out wipe on the HD and installed tiger from the dvd. But on the first restart after installation (where i should go to the set up assistant) I get the scrambled beach ball and it freezes.
I thought perhaps the HD is faulty and ran disk utility on it - it came back as fine. I doubled checked to make sure it was set to 'master'. it sure was. I decided to swap out the HD anyways since i can't see what else could be the problem and put in a different 30gb IDE drive. I once again zeroed out the drive and did a fresh install of tiger. On restart i get the same scrambled beach ball and the freeze.
I guess i should describe the scrambled beach ball. It's seems like the beach ball icon, except the bits that make it up are out of order and glitched out.. perhaps a video problem?
Could this really be a logic board problem? It was working in OS 9.1 fine. It starts up from system CDs and DVDs fine. Wouldn't a logic board exhibit the same problems on those systems?
Anyone have any idea?
Update - starting in Safe mode (restart with shift held down) works, and i was able to update to the latest version of Tiger, but once i restart with the full system i get the same problem.
This seems to me that it ISN'T a logic board problem, but more of a system software problem. Now my question is how do i isolate and fix the problem in Tiger?
I guess i'll post this question in the Tiger forum, but if anyone has any ideas please let me know.
Thanks

970 GAMING black screen when boot on cold start, have to clear CMOS everytime

I have 970 GAMING w/ FX8320, it shows black screen when boot on cold start, have to clear CMOS everytime to enter default.
I have updated it to the up to date M11 bios. Once it boot up, it functions OK no matter whether you reboot or reset it. But after turned off a few hours (cooled down), it shows on black screen again on boot, all LED lights up OK, but I can hear the fan like keep rebooting, any idea?
PSU seasonic 430W, GPU HD7750.

In what DIMM slots did you insert your memory? I just got and at this moment building a new computer with a 970.
A horrible experience I had with my last build reminded me of it. My board was am MSI A88XM-E45. DIMM1 is blue, DIMM2 is black, DIMM3 is blue, & DIMM4 is black. When using two sticks of RAM, it says to install one on DIMM1 & the other in DIMM3 (Makes sense... After all, it's color colored that way).
Well it would not boot. I reseated every component and for HOURS tried almost everything. Finally I decided to place my two sticks of RAM in the first two DIMMS and viola!
I think I will begin this build the same way.

Blue screen on boot up

I am having issues with my 13.3" MBP, blue screen on boot up?, cannot figure out why? If I log in as another user(from my older macbook) it will boot but I cannot get to my newer files and docs. Any thoughts?, it appears to be a permission issue as if I boot up as a target disk using firewire, the files I want to access are still on my hard drive.

Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of this exercise is to determine whether the problem is caused by third-party system modifications that load automatically at startup or login. Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards. Boot in safe mode* and log in to the account with the problem. The instructions provided by Apple are as follows:
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key. The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple icon and the progress indicator (looks like a spinning gear).
*Note: If FileVault is enabled under Mac OS X 10.7 or later, or if a firmware password is set, you can’t boot in safe mode.
Safe mode is much slower to boot and run than normal, and some things won’t work at all, including wireless networking on certain Macs.
The login screen appears even if you usually log in automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem(s)?
After testing, reboot as usual (i.e., not in safe mode) and verify that you still have the problem. Post the results of the test.

Windows Blue Screen - when trying to re-sync an IPOD after doing 5 R's

My windows based Itunes failed to recognize my ipod, so I trouble shooted and finally ended up doing the 5 R's.
This resulted in a "Blank Ipod" (after restore).
I was able to successfully get Itunes to recognize my ipod after the restore. That is when a "major problem" occurred.
When my 37 gigs of MP3s on my PC attempt to automatically update onto my "blank ipod", my system crashes giving me the dreaded windows BLUE SCREEN! The error messgae indicates that a physical memory dump occurred and the system shuts down.
I figure it has something to do with all of those gigs trying to update onto the ipod. SO, I start to manually transfer (drag and drop) about 100 mp3s at a time onto the ipod within itunes. It still crashed after the 3rd batch of 100 mp3s.
Has anyone experienced this? Does it have anything to do with Mirosoft's newest IE vunerability? I use Firefox usually, but sometimes HAVE to use IE. What can I do?
This really *****.
thanks for your help.
Zeppy
Dell Dimension Windows XP

hi zeppy!
hmmmmmm. a 0x7E? that's not the most commonly reported BSOD code here.
but the MS KB seemed to have at least one clue for us.
(1) sometimes people can get blue screens when they plug in an ipod if their FireWire, USB, or dock has gone bad. i see from that STOP message resource that the 0x7E can be associated with dodgy USB.
by way of tracking down that possibility, do you still get the BSOD if you connect to a different port? (or, if you've got a dock, connect directly to a port instead?)
(2) on general principles, we'd better check for malware. download fresh definitions and run vigorous virus and spyware scans. if your security software providers offer online scans, run those as well. (they can sometimes pick up an infection in cases where the security software on the PC has been compromised.)
(3) especially if you've recently installed any new hardware on your PC, head into Device Manager to check to see if there's any alert/warning messages showing up next to any of your devices. if you see any, what do they say?
(4) let's also let's also capture a minidump of the crash and send it to the Discussions Hosts, so they can throw it over the fence for the Apple engineers to analyze.
To set up your machine to capture a minidump, right click on "My Computer", select "Properties", select the "Advanced" tab, select the "Startup and Recovery" Settings button, select "small memory dump" from the popup. When it crashes, look for the MiniDump file. It's usually in the folder "C:\WINDOWS\Minidump" and is called something like Mini<number>-<number>.dmp.
And then send it to a Discussions Host. It doesn't hurt to put the URL to this discussion thread, so that whoever gets it has some context. Also give as much information about the context of the crash (in the email) as you can.
love, b

Computer goes to blue screen when ipod plugged in.

I have tried all angles on this and still haven't been able to figure out. Can somebody please offer some new knowledge? I have tried some older suggestions awithout resolution. Here is what is happening using Windows 7/lastest updated itunes and ipod 80g classic:
My ipod was completely erased after trying to update through itunes as i normally do. Now when i plug ipod into the itunes, it will not be recognized in the left column and after about 3 minutes my entire computer will go to blue screen and reboot itself. I have tried restoring, checked diagnostics on ipod. I think I may need some more info on opening itunes in safe mode and beginning from there, however I'm open for any other suggestions/links. Thank You

First off, have you made sure your Windows OS is up to date with all the latest patches and updates? Have you also checked with your PC's manufacturer (such as Dell, Toshiba, etc) to make sure you have all the latest drivers, firmware and BIOS installed?
Does the PC ever blue screen when the iPod is NOT connected?
B-rock

Blue screen when installing Win XP Home

Getting blue screen when installing Win XP Home on 915P Neo2 Platinum motherboard with the on-board LAN port enabled! Any idea to fix this?

disable onboard lan then reneable it after you get xp installed see if that works. try to get the latest bios for your motherboard to.

Lenovo thinkpad L412 blue screen when i move my laptop

i am using lenovo thinkpad L412 laptop
my screen gets blue screen when i move my laptop. if i dont move it it just works fine.
i tried to update my stytem for latest driver and software but still problem doesnt go away.
i also run the diagnostic test for hardware but it doesnt show any problem.

You can't have a blue screen in bios, blue screens are a "feature" of Windows OS.
What is the error code mentioned on the blue screen? This could give information about the nature of the problem.
You could also try to boot from a Linux Live cd distribution, such as Ubuntu for example (no need to install it, just boot from it). If the Live cd works well then most probably this is not a hardware problem but drivers related as somebody already suggested.
Please tell us the machine type of your laptop, the operating system used and any hardware changes you have made (added memory, changed hard disk etc). Give as much details as possible!
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
This will help the rest of the Community with similar issues identify the verified solution and benefit from it.

Blue screen when booting Win7 on new board

Similar Messages

Maybe you are looking for