Blue screen with ativvaxx.dll error when connecting video cam - Satellite A100
Hi, everytime I connect my video cam, my system will crash and I get a blue screen stating that there is a problem caused by ativvaxx.dll. Any of you guys know how to fix this? I've got a Satellite A100 system, it's new. Any help is highly appreciated.
Thanks.
Cool that you have solved the issue and thanks for the info. Maybe it could be useful for other users.
Similar Messages
-
Blue screen with the following error SYSTEM SERVICE EXCEPTION (ACPL.sys)
Hi,
I had a blue screen with SYSTEM SERVICE EXCEPTION (ACPL.sys) error message yesterday.
It happened right after the graphic card update was completed. I have an HP Spectre XT laptop with Windows 8 and Intel(R) HD Graphics 4000.
After restart, I noticed that the available free space on my hard disk dropped by 4 GB!
Can you please assist?
Thank you.We do need the actual DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.
WE NEED AT LEAST TWO DMP FILES TO SPOT TRENDS AND CONFIRM THE DIAGNOSIS.
You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.
If you are overclocking stop. (chances are if you dont know if you are, you are not)a
To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder. We need at least 2 DMP FILES to diagnose and confirm
The procedure:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button. (if available on your site, MS doesnt have this)
*Please upload them to a file sharing service like Skydrive or"Rapidshare" and put a link to them in your reply.
Link for how to upload below.
http://www.wikihow.com/Use-SkyDrive
To ensure minidumps are enabled:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.
Please also run MSinfo32 and upload the output as well.
To run MSinfo32 please go to start>run>MSinfo32
Go to "file" "save" and upload the saved file with the DMPS
System specs are extremely useful so please include whatever you know.
Blue Screen View & Who Crashed are often wrong and should only be used in an emergency
Team Zigzag3143.com
Wanikiya & Dyami--Team Zigzag -
Blue Screen with Turning Wheel appears when logging out
This started happening when I partitioned my HD to run Windows, but continued after I reset Boot Camp. When I log out, rather then going to the log in screen(shared computer), the screen turns blue and a small gear wheel starts turning in the bottom portion of the screen. After about 10 minutes, it stops turning and appears to freeze. It takes almost half an hour to an hour to log back in once the blue screen disappears. Is there anyway to get rid of this?
Zap the PRAM and Reset the SMC Then, http://docs.info.apple.com/article.html?path=Mac/10.6/en/8963.htm and http://www.thexlab.com/faqs/sbbod.html for more info..
-
Error when connecting my camera
I've had a problem attaching my Panasonic NV-GS35 mini-dv camera to my brand new imac. When i attach it to capture footage i get the error message "An error occured while configuring Quicktime using the current capture preset. Please quit final cut pro and check your hardware configuration."
I have updated final cut pro with the latest updates, i use a firewire cable and i turn on the camera after attaching the camera. The camera is in playback mode like it's supposed to be. I've attached another camera and that works perfectly, that camera was a Sony DCR-PC330E mini-dv camera. I used the original cable in the same ports so it's not the cable. Any ideas how to fix this problem so i can capture using my Panasonic camera?
ThankyouHi
May be You find help in my general (iMovie) list:
• Test another FW-Cable.
• Test Your Camera on another Mac so that DV-in still works OK
• Toogle in iMovie pref: Play-back via Camera (on<->off some times)
Other ways to import Your miniDV tape:
Use another Camera. There where tape play-back stations from SONY
but they costed about 2-4 times a normal miniDV Camera.
If Your Camera works on another Mac. Make an iMovie movie project here and move it
over to Your Mac via an external hard disk.
(HAS TO BE Mac OS Exchange formatted - USB/DOS/FAT32/Mac OS Exchange WILL NOT DO)
(Should be a FireWire one - USB/USB2 performs badly)
FireWire - Sure not using the accompany USB-Cable but bought a 4-pin to 6-pin FW one ?
Using WHAT ? :
• Mac OS - X.5.4 ?
• QuickTime version ? (This is the heart in both iMovie and FinalCut)
• iMovie 8 (7.1.?) ?
• iMovie HD 6 (6.0.4/3) ?
• FCE/P version
*Free space on internal (start-up) hard disk ? (Others don't count)*
Does Your Camera work on another Mac ?
Sorry to say it is to easy to turn the 6-pin end of the FW-cable 180 deg wrong.
This is lethal to the A/D-chip in the Camera = needs an expensive repair.
(Hard to find out - else than import/export to another Mac ceased to work
everything else is OK eg recording and playback to TV)
Delete iMovie pref file may help sometimes. I rather start a new account, log into
this and have a re-try.
from LKN 1935:
Hi Bengt W, I tried it all, but nothing worked. Your answer has been helpfull insofar as all the different trials led to the conclusion that there was something wrong with my iMovie software. I therefore threw everything away and reinstalled iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos) to my Sony camcorders worked properly as it did before. Thank you. LKN 1935
from Karsten:
in addition to Bengt's excellent '9 yards of advice' ..
camera set to 'Play' , not rec/computer/etc.?
camera not on battery, but power-line?
did your Mac 'recognize' this camera before...?
a technical check:
connect camera, on, playback, fw-connected...
click on the Blue Apple, upper left of your screen ..
choose 'About../More..
under Firewire.. what do you read..?
Yours Bengt W -
Vista - Error when installing drivers on Satellite A100-788
Hi,
I put Vista on my A100-788 (PSAA9), and the drivers available on the french Toshiba website.
But, when I try to install the Value Added Package (1.0.11BTN), the installation program respond with an error message :
.... NOTINSTALL .... (I don't remember exactly the message but it contains NOTINSTALLTVALZ or something like that).
Then the installation stops and get rid of me !
What's the problem ?Hi
Hmmm without the exactly error message its not possible to say what could be wrong.
I assume you have a clean Vista installation on your notebook and also the BIOS was updated.
If not, do it! -
PC getting Stop error when connecting iTouch
I have a 2nd generation iTouch that I sync'd up to my pc with no problem when I first got it about 2 weeks ago. Now everytime I connect it, I get the blue screen with a stop error. My daughter also has an iTouch (1st generation) and I can connect that one with no issues. Any ideas on what to do? I repaired iTunes but really didn't want to uninstall and it seems to be just my iTouch. I can connect it to my work laptop to charge with no issues too.
Well, the other USB port was working for a while. Now none work. When I plug my iTouch in, I get the Windows XP stop error and the blue screen of death. The USB port works for other things like my jump drive. I can plug my iTouch into my laptop and all is fine. I recently upgraded my iTouch to 3.0 but it still worked after doing that. Do you think my USB drivers need to be upgraded?
-
What does a blue screen with B807edoc mean?
My Photosmart 5550C is giving me a blue screen with a B807ED0C error.
Since I can't find what that means anywhere on the web, I'm hoping I can get it answered here?When your printer gets an alphanumeric code error it usually means that you have a hardware issue. I am including a document that may assist.
Alphanumeric Code
Let me know how it goes. -
Blue screen error when connecting an ethernet cable
I have a Compaq Presario 5300US desktop that I'm trying to upgrade. It has 512mb (max) of memory and a newer video card than the factory one. I installed Vista Home Basic on it with no problems. I also installed a pci ethernet card along with the Vista drivers that came with it. I checked tha card's properties in "device manager" and it said "This device is working properly". I haven't plugged in an ethernet cable to the card at this point. Everything is working OK, but as soon as I try to connect the card to my router, I get a blue screen with this message:
Hardware Malfunction
NMI: Parity Check / Memory Parity Error
*** The system has halted***
I don't get any memory errors as long as I don't try to use the ethernet card.Hello @larrycarol99,
I understand that after upgrading your computer when you plug in an ethernet cord you get a hardware malfunction error. I am providing you with a Microsoft Support document: Hardware Malfunction Results in System Error Message that explains what causes that error and provides steps on fixing it. I am also including a link to the Compaq Presario 5300US Desktop PC Drivers page, which unfortunately does not have any drivers for your computer running Windows Vista.
I hope this helps. Thank you for posting on the HP Forums. Have a great day!
Please click the "Thumbs Up" on the bottom right of this post to say thank you if you appreciate the support I provide!
Also be sure to mark my post as “Accept as Solution" if you feel my post solved your issue, it will help others who face the same challenge find the same solution.
Dunidar
I work on behalf of HP
Find out a bit more about me by checking out my profile!
"Customers don’t expect you to be perfect. They do expect you to fix things when they go wrong." ~ Donald Porter -
My macbook13in has a blue screen with error code 10813
my macbook 13in has a blue screen with error code 10813
Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Also see:
Reinstall OS X Without Erasing the Drive
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless. -
I have attempted to sync my new iPod touch 4th gen. with my current PC running Windows XP and everytime I attempt it I get the dreaded blue screen, here are the error codes- 0x0000007E; 0XC00000005; 0X00000000; 0XBA51B7C8; 0XBA51B4C4 any suggestions?
In the course of your troubleshooting to date, have you worked through the following document?
iPhone, iPad, or iPod touch: Windows displays a blue screen message or restarts when connecting your device -
Blue screen with error code and I have no recovery disks for HP Pavilion dv6-1260se
I have a HP Pavilion dv6-1260se with factory installed operating system of Vista. When booting up the computer, I receive a blue screen with this error message: STOP: c000021a {Fatal System Error}.
The verification of a KnownDLL failed. system process terminated unexpectedly with
a status of 0x0000221 (0x007fb9c0 0x00000000).
The system has been shut down.
I do not have recovery disks for this computer. I tried to order them but them seem to not be available. This is my daughter's computer. She says she started to have trouble after downloading Frost Wire (music share) and then she removed it. We tried going back to an earlier time and that didn't help and then the blue screen with error message appeared. What do I do now?
This question was solved.
View Solution.Hi,
Assuming your in the US, recovery discs are available to order for that model here. That may be the best option.
You should also be able to do a recovery without the discs as well. Take a look at this document: Recover Windows Vista Operating System Using HP Recovery, and look for the section Restore the PC to its original condition with the HP Recovery Manager if Windows Vista is not accessible. This should allow you to recover the PC.
R
Although I am an HP Employee, I am speaking for myself and not for HP. -
Satellite A350 - Blue screen with error message
When starting windows7, I am getting blue screen with error message 0x0000116.
Can anyone assist please?It looks like a graphic card driver is a trouble maker.Try to reinstall a graphic card driver in safe mode (f8 on startup). Read this article for information:
http://social.answers.microsoft.com/Forums/en-US/vistahardware/thread/eb584685-6b8b-4ad7-b6cc-ae5ee78095fb
It's for VISTA but should be the same for win 7 too. -
I have an iMac from 2008. When I start I get gray screen with apple and turning gear. Next blue screen. Then light blue screen with turning gear. Back to blue screen. Now just back and forth blue to light blur
Reinstall OS X:
Reinstall OS X without erasing the drive
Do the following:
1. Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Reinstall Snow Leopard
If the drive is OK then quit DU and return to the installer. Proceed with reinstalling OS X. Note that the Snow Leopard installer will not erase your drive or disturb your files. After installing a fresh copy of OS X the installer will move your Home folder, third-party applications, support items, and network preferences into the newly installed system.
Download and install the Combo Updater for the version you prefer from support.apple.com/downloads/.
Reinstalling Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Continue button.
Note: You can also re-download the Lion installer by opening the App Store application. Hold down the OPTION key and click on the Purchases icon in the toolbar. You should now see an active Install button to the right of your Lion purchase entry. There are situations in which this will not work. For example, if you are already booted into the Lion you originally purchased with your Apple ID or if an instance of the Lion installer is located anywhere on your computer. -
When I click on Yahoo Bookmark Icon & click on Save this page,
I get the normal screen Save To My Bookmarks, etc. I fill out as
normally & click save. That is when I receive blue screen with above message. Frustrating because it lets me go through the process but then will not save. Is this a cookie or privacy issue??At the top of yahoo bookmarks there is a message:
To Yahoo! Bookmarks users:
Yahoo! Bookmarks is transitioning and will be exclusively available via Yahoo! Toolbar. During this transition, you will be able to access your bookmarks in read-only mode.We expect the transition to be fully complete by October 20, 2011, after which you will have access to your bookmarks with the ability to add/ edit/ delete bookmarks.
Please download Yahoo! Toolbar for a full bookmarks service. We sincerely apologize for any inconvenience during this period.
But the toolbar dosn't work either, even after it is updated, so we may just have to wait.
Hope this helps :) -
Blue screen with error message
Product Name: HP Media Center M7250n Desktop PC
Product #ED842aa-aba
I have been getting a blue screen with error messages that ask if this is the first time i get the error and then at the end it says it is dumping memory. I would like to wipe my harddrive and reinstall XP but my system is out of warrenty and HP won't provide me a recovery CD. What are my options.
This question was solved.
View Solution.Hi,
You are most welcome.
"I work for HP."
Please click the "White Kudos" star to say thanks for helping.
Please mark "Accept As Solution" if my help has solved your problem.
Maybe you are looking for
-
Get data from a JMS XML queue and save it in a file
Hi, Here I come with my issue again. I'm trying to test a JMS XML implementation with ODI 10.1.3.4.0 and my target is a single delimited file. I made simple things, my XML contains the following code : +<?xml version="1.0" encoding="UTF-8"?>+ +<test>
-
NAC - users first access to web unsuccessful
Hello We have a NAC appliance with CAM and CAS. When somebody tries to load any external page, he is supposed to get the CAS authentication page. However, what he gets is a "not found" error message. If he types directly the IP of the CAS in the brow
-
From Vendor Creation to Payment of Supplier (New User Here)
Hi, Can anyone here could help me find a link or any softcopy of document that will help me learn more about the process of vendor creation up to the payment of supplier process. Right now I'm using an Oracle Dev module so we can tests for ourselves
-
Problème d'affichage fenêtre de paramètres: elle est surdimensionnée.
Bonjour à tous j'ai besoin de votre aide, dans Adobe Muse CC 2014 quand je lance l'application pas de soucis mais pour créer un projet ou modifié les préférences du site je me retrouve face a une fenêtre ( vraiment) trop grande: Ci-dessus c'est une i
-
I tried to download with a redemption code and got the message: "your computer isn't authorized" -- how do I do that?