Blue screen with black circle in upper right corner

My Mac froze. I tried rebooting and now it won't boot past the blue screen. I have a mouse pointer and there is a small black circle with three smaller blue dots inside of it in the upper right hand corner of the screen. Clicking on it does nothing.
I tried booting in safe mode but it wouldn't boot past the galaxy screen. Again, I had a mouse pointer but nothing more.
I've tried booting from the OS disc that came with the computer. It sounds like the disc is running but nothing ever happens.
Any help is greatly appreciated.

Run through this list of fixes, you can't use a previous OS X install disk to fix a later OS X version on the machine.
Step by Step to fix your Mac

Similar Messages

  • My macbook pro freezes and then displays a blue screen with black stripes... do you know what's wrong with it?

    My macbook pro freezes and then displays a blue screen with black stripes... do you know what's wrong with it?
    I have a two and half year mac book pro... I've had some issues with the screen looking scrambled when I quit certain applications, but now it's turned into something worse.  I'll be working on my computer and the thing will freeze.  When I force restart, the first screen, the apple logo, will be a blue tint and won't boot up normally.  Then I try safe mood and it will then boot just fine.  But there are blue stripes on my screen.  The screen alternates from a blue tint to normal and if the computer freezes again the screen will become completely blue with black stripes.  I haven't tried reinstalling my software because I don't have the startup discs that came with my computer.  If I was sure that would fix it I would purchase them, but if it's a hardware issue I'm afraid that I'm screwed.  I've been able to successfully get the blue off my screen by putting it to sleep and then waking it up, but that's not working well anymore either. 
    Does anyone else have experience with this?  Is it the firmware or what?  I have a MacBook Pro from early 2011 and I'm running Mac OS X 10.6.8.
    Please help... Thanks!

    I just experienced this exact same issue with my early 2011 15" macbook pro. Since like a month after purchasing it I had issues with the screen randomly going dark on me. I sent it in for repair inder waranty they replaced the gpu and logic board but I continued to have the same issues with the screen randomly going black sometimes I would need to reboot it in order to get the screen to go back on but it happened so infrequently and I used the computer for school so disnt find the time to resend it in to apple. Just last night the screen started to display the blue screen with black verticle lines on it. I called apple and explained to them  the issues that had been ongoing since I purchased the laptop but they said because I was now outside of warantee that any repairs at thia point wouldn't be covered. Fml so glad I spent 2200 on this future proof macbook pro what a joke my sister purchased a toshiba laptop for 300 4 years ago and it still running like a champ. I loved my macbook but at the price I paid I expect it to last longer than 2 years before leaving me high and dry. *** apple??

  • Display - Black rectangle on upper right corner.

    After some reboots, for any reason (updating software, etc.), a black rectangle approximately 3" wide and 1" high shows in the upper right corner of the display, about 1/3" from the display sides.
    Restarting the laptop, sometimes twice, makes the black rectangle disappear.
    I have been unable to recreate any situation where the black rectangle appears, or disappears. It seems to be random.
    What could be the cause, and remedy?
    Although not very young, the laptop works fine.
    Another question, NOT related: is it possible to use a SATA internal HD in this PCC laptop? Its current HD is an ATA Toshiba.
    TIA
    Charly

    My guess is bad video RAM, but I suppose it could be a bad graphics chip or even a bad LCD connection. Try scrounging an external display and see if it has the same problem. Try gently flexing and squeezing the screen a little when this crops up. Unfortunately, bad VRAM is a permanent part of the main logic board.
    No, SATA drives won't work inside the PB G4. I think I have heard of adapters, but I doubt they would fit.

  • Firefox opens with a blue screen and no options of File, Edit or Tool. Simply blue screen with close options in top right?

    There is a blue window that comes up when I open Firefox. There is no options for File, Edit or Tools. And there is no bar at the bottom, there are simply the (Close, Minimize...) in the top right.

    hello Steffen47 , [https://support.mozilla.org/en-US/questions/940393#answer-377118 from another user] we found out that this might be related to malware active on your pc. please close all firefox windows and try [[Troubleshoot Firefox issues using Safe Mode|running firefox in safemode]] (by pressing the shift key while you're starting it). in firefox safemode go to firefox > addons > extensions and remove the entry named "Codec v1.0" or any other addons that look suspicious (toolbars etc.) & you have not installed intentionally. afterwards see if you can run firefox normally again...
    please also do an in-depth scan of your system with the security software already in place and/or a different tool like the [http://www.malwarebytes.org/products/malwarebytes_free free version of malwarebytes] & keep firefox and your plugins up-to-date in order to stay safe on the web.
    [[Troubleshoot Firefox issues caused by malware]]
    [[Update Firefox to the latest version]]
    https://www.mozilla.org/plugincheck/

  • I just dropped my iPhone 4s and now it has a blue screen with black vertical lines. what can i do?

    will i need to buy and new one or what?

    When the 4S was first introduced, two flavors of AppleCare were offered: Regular & AppleCare Plus. AppleCare Plus permits an out of warranty exchange for US $49, twice during the life of the contract. Regular AppleCare has no such provision & an out of warranty exchange will be US $199. Regular AppleCare is no longer sold in the US.

  • IPod Nano 3rd generation. Black spot in upper right corner.

    Any way to fix this?

    Greetings Sonphan100bot,
    Welcome to the Apple Support Communities!
    I understand that you are having some difficulty with the display on your iPod nano (3rd generation) staying dark even while playing music. To begin troubleshooting this situation, I would suggest working through the steps in the attached link. 
    Apple - Support - iPod - iPod nano (3rd generation) Troubleshooting
    Cheers,
    Joe

  • On text screen icons on the upper right corner are overlapping (i.e. contact and the upload arrows)

    When on the texting screen, the icons on the upper right corner are overlapped.  Example:  the new text icon is underneath the upload icon.  Also, when in an individual text screen, the contact icon is underneath the upload arrow icon.  Seems to be a software problem to me.

    and here is a second sample of the issue.

  • MY SCREEN WILL NOT ROTATE! THERE IS ALSO A PICTURE OF A LOCK WITH A CIRCLE AROUND IT IN THE UPPER RIGHT CORNER BESIDE MY BATTERY INFO. HOW DO I GET MY SCREEN TO ROTATE?

    my screen will not rotate, how do i change this. there is also a picture of a lock w a circle around it in the upper right corner of screen beside my battery info.

    ok ipad or iphone??
    iphone - double tap the home button (the round button with the white square) then drag your finger across the button across the bottom of the screen (left to right) when the quick access bar opens. then u will see a icon on the left hand side that looks like that icon next to the battery. tap on that and it will disable the rotation lock fetcher
    ipad - double tap the home button (the round button with the white square) then drag your finger across the button across the bottom of the screen (left to right) when the quick access bar opens. then u will see a icon on the left hand side that looks like that icon next to the battery. tap on that and it will disable the rotation lock. if it dose not open try the switch on the side of the ipad that is a rotation lock switch in ios 3.x and in ios 4.3 it has the option to be a rotation lock switch.
    David

  • My photos don't rotate anymore when I flip my phone and I notice a new icon symbol in the upper right corner of the screen that looks like a lock with a 3/4 circle going around it. Any ideas???

    My photos don't rotate anymore when I flip my phone and I notice a new icon in the upper right corner that looks like a lock with a 3/4 circle going around it.
    Any ideas???
    Thanks

    A Icons and their meanings are covered in the manual ( orientation lock included)
    iPhone User Guide (For iOS 5.1 Software)

  • I can not get into the iTunes store for the past two days.  I can do a search on the music in upper right corner.  However, the screen is white with "iTunes" in the middle when I do. Any suggestions?  Thank you.

    I can not get into the iTunes store for the past two days.  I can do a search on the music in upper right corner and get a drop down list.  However, the screen is then white with "iTunes" in the middle. Any suggestions?  Thank you.

    Check out this Apple article -> iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
    If your computer has one of the LSPs listed you may have to reset winsock.
    If not, you may want to give this article a shot -> iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits, freezes, or launch issues

  • HT1430 I cannot switch my phone off as it is stuck on a black screen with a circle going round

    I cannot switch my phone off as it is stuck on a black screen with a circle going round as if it is going on to the next screen, I cannot seem to chnage it off this screen.  i also will not connect to itunes with an unknown error 0xE800065.  Any ideas???

    Start at # 3
    1-  iOS: Not responding or does not turn on
    2  Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    3 If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    4  Try on another computer                            
    5  If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
      Apple Retail Store - Genius Bar

  • Black screen with white circle every 5 seconds, after water damage

    my ipod touch (3gen.32gb) had water damage 3 days ago. now as it dried, i connected it to itunes and restored, but it keeps showing black screen with white circle every 3-5 seconds. could this be a software problem or is it all because of water?  i put it in recovery mode, and restored again, but it did not help, is there anything i could do to stop it ? thanks

    Try:
    - iOS: Not responding or does not turn on
    - Also try DFU mode after try recovery mode
    How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
    - If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
    - Try on another computer
    - If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
    Apple Retail Store - Genius Bar       
    I there is water damage
    Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
      Apple - iPod Repair price

  • There is a pad lock symbol in the upper right corner of my screen. does anyone know what this means? it has a circle around it...

    There is a pad lock symbol in the upper right corner of my screen. does anyone know what this means? it has a circle around it...

    abigailfromwaddell wrote:
    There is a pad lock symbol in the upper right corner of my screen. does anyone know what this means? it has a circle around it...
    You have activated rotation lock. Check the little switch near the volume control.
    Stedman

  • How to make the contact picture should appear on the upper right corner with thumb picture when some one calling instead showing the entire screen

    How to make the contact picture should appear on the upper right corner with thumb picture when some one calling instead showing the entire screen

    See deggie's response in this post... https://discussions.apple.com/message/8531821#8531821

  • Machine Check blue screen (with error codes)

    I thought I had this fixed, but apparently I was wrong. Every now and then, for what seems to be no apparent reason, I get this blue screen error:
    Quote
    CRITICAL STOP: MACHINE CHECK EXCEPTION
    A problem has been detected and windows has been shut down to prevent damage to your computer.
    If this is the first time you have seen this stop error screen, restart your computer. If this screens appears again follow these steps:
    Check to make sure any new hardware and software is properly installed. If this is a new installation, ask your hardware or software manufactorer for any windows updates you may need.
    If problems continue, disable or remove any newly installed hardware or software. Disbable BIOS memory options such as caching or shadowing.
    TECH INFO: ***STOP: 0x0000009c (0x00000004, 0x80545ff0, 0xb2000000, 0x00070f0f)
    I had similar problems before, but the blue screen is new after replacing my video card. (Before the new video card, the computer was freezing up with a black screen. I'm assuming the blue screen is a step in the right direction?) Original thread is here.
    Right now, this is my current system:
    Motherboard: K8T Neo-FIS2R [Bios version 2.0 (I think; its the most current version as of 2-15-05)]
    CPU: Athlon 3000+
    PSU: Antec Truepower 550 (+5V=40A; -5V=0.5A; +12V=30A; -12V=1.0A; +3.3V=32A; +5V SB=2A)
    RAM: 1 1GB DDR400 (cas 3.0)
    HD: Seagate ST320082 200GB SATA Drive (VIA driver)
    DVD: LiteOn DVD Rom
    Floppy Drive
    Running Windows SP2, all current updates installed
    NVidia 6800GT video card (Asus; using TechConnect driver)
    Soundblaster Audigy 2
    DLink Wireless Network Adapter (DWL-G520)
    I have tried replacing the RAM, HD, video card, and Power supply with similar results.
    The error message clearly states that I should try disabling memory options such as BIOS memory options such as caching or shadowing, but I don't know what affect this would have if I did this. Any opinions on this and other suggestions would be greatly appreciated.
    Thanks...
    - doubleozero
    - EDIT -
    One more note: Nothing is overclocked in PC. All temperatures seem normal. CPU does not go over 38C.

    I ran memtest for about 5 hours with no errors. I'll give it a go for a while w/o the sound card for a week or two.
    I wish this thing wasn't so hard to troubleshoot. For example, it was happening about 2 times a day before I tried new ram. After going with the new stick of ram, it was fine for about 10 days, so I thought it was solved. Then last night, I got two of these again.

Maybe you are looking for

  • How to use LSMW using the IDOC to upload and maintain cost center group

    Hi Everyone, Is there anyone who knows how to use LSMW using the IDOC functions instead of the recording. I wanted to upload the alternative cost center group I created in the system.  reply would be greatly appreciated Warm Regards

  • Query for turn-over to end-users

    Hi Friends, I have create a query called "query1.sql" which print monthly summary report to excel/csv. Can I automate this query for turn-over to user/operator, so that the user will just invoke run-time program only to produce the desired output? or

  • How to use Synclast MIDP in netbeans

    Hi i have downloaded the Synclast MIDP UI from http://sourceforge.net/project/showfiles.php?group_id=83391 but i am having trouble finding a way to use it in my j2me project netbeans does anybody know how to use these UI has i want to customize a for

  • Installed oracle 10.1 in AIX 6.1

    Hi , i have installed oracle 10.1 in AIX6.1 by using the following : runInstaller -ignoreSysPrereqs -silent -responseFile /enterprise.rsp i have used the silent installation but according to the documentation oracle 10.2.0.3 has certified for AIX 6.1

  • Have TNS errors...

    Hi All, I have a 11.2.0.2 RAC database * SCAN listeners. The issue I am facing is: 1). Created DB link to remote database using remote database (DESCRIPTION= (LOAD_BALANCE=on) (FAILOVER=on) (ADDRESS_LIST= (SOURCE_ROUTE=yes) (ADDRESS=(PROTOCOL=tcp)(HO