Blue screen with Discoverer 3.1 End-User

I have a workbook with four worksheets. With one of the worksheets (the other three seem fine) I get a blue screen on my workstation when trying to export the workbook to MS EXCEL. The worksheet in question has approx. 20,000 rows. I have export other worksheets that had over 50,000 rows without an issue. It seems, that when this worksheet exports, it suck all resources for my workstation.
Looking for help

I haven't seen what you are mentioning yet. However, if you create a calculation or parameter in 3.142 and one of your users still has 3.141, the user will get an error message: Invalid combination of filters or calculations, query cannot be resolved. Upgrading to 3.142 corrects this for the user.

Similar Messages

When trying to save page in Yahoo! Bookmarks, I receive blue screen with message:A problem occured while trying to save bookmark. Please try again later. I get the same message every time.

When I click on Yahoo Bookmark Icon & click on Save this page,
I get the normal screen Save To My Bookmarks, etc. I fill out as
normally & click save. That is when I receive blue screen with above message. Frustrating because it lets me go through the process but then will not save. Is this a cookie or privacy issue??

At the top of yahoo bookmarks there is a message:
To Yahoo! Bookmarks users:
Yahoo! Bookmarks is transitioning and will be exclusively available via Yahoo! Toolbar. During this transition, you will be able to access your bookmarks in read-only mode.We expect the transition to be fully complete by October 20, 2011, after which you will have access to your bookmarks with the ability to add/ edit/ delete bookmarks.
Please download Yahoo! Toolbar for a full bookmarks service. We sincerely apologize for any inconvenience during this period.
But the toolbar dosn't work either, even after it is updated, so we may just have to wait.
Hope this helps :)

Blue screen with error message

Product Name: HP Media Center M7250n Desktop PC
Product #ED842aa-aba
I have been getting a blue screen with error messages that ask if this is the first time i get the error and then at the end it says it is dumping memory. I would like to wipe my harddrive and reinstall XP but my system is out of warrenty and HP won't provide me a recovery CD. What are my options.
This question was solved.
View Solution.

Hi,
You are most welcome.
"I work for HP."
Please click the "White Kudos" star to say thanks for helping.
Please mark "Accept As Solution" if my help has solved your problem.

Macbook Pro 10.6.8 won't shut down. Blue screen with spinning wheel.

it's an 15 inch macbook pro. since I bought this computer was working fine about last year. Somehow, start of this year, the problem begins. Everytime when i opened microsoft word 2011 on mac or Photoshop cs5, and quit the software as normaly. When i try to shut down the blue screen with spinning wheel apears. this spining wheel is endless. But funny thing is that after use other software such as games, web browser (safari) etc. and quit them. when i shut down there was not a problem. only word 2011 for mac and adobe photoshop cs5. Any solutions?

Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Console in the page that opens.
Step 1
Select "system.log" from the file list. Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Post the messages logged during the time something abnormal was happening. That time might be before or after the boot.
For example, if the problem is a slow startup taking three minutes, post the messages timestamped within three minutes after the boot time, not before. If the problem is a system crash or freeze, post the messages from before the boot time, when the system was about to crash or was failing to shut down. In either case, please include the BOOT_TIME message at the beginning or the end of the log extract.
Post the log text, please, not a screenshot. If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
If the log doesn't go back far enough in time, scroll down in the Console file list to /private/var/log/system.log.0.bz2. Search that archived log, and if necessary the older ones below it, for the same information.
Important: Some private information, such as your name, may appear in the log. Edit it out by search-and-replace in a text editor before posting.
Step 2
Do the same with kernel.log.
Step 3
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall or hang logs — they're very long and not helpful.

Blue screen with cursor at boot. And everything after that.

Dear Forums,
(Please note, I'll refer to the machine as a Server, but it is only using 10.4 client; I am merely using the Sharing capabilities of such).
I have a MDD G4 that I'm using as a server. When I start it up, I get the Blue Screen with Cursor (BSwC) at boot - and it never goes past that. (Can't move the cursor either).
I have read the articles
http://docs.info.apple.com/article.html?artnum=106464
And Dr. Smoke's
http://www.thexlab.com/faqs/startupitems.html
http://www.thexlab.com/faqs/repairprocess.html
I've also tried AppleJack and clearing out caches, zapping PRAM, etc. All the standard fare.
It will boot into safe mode just fine, and it is still acting as a server just fine.
I have also tried Multiple Users (to no avail).
I tried a reinstall of Tiger, which, interestingly enough, didn't give me the option for Archive and Install and Preserve, but instead only gave me the option to Upgrade (hm, from Tiger to Tiger). While this fixed nothing, the server continued to work after this.
Then I had the bright idea to install the OS to the 2nd drive I had within. 'Surely this would work,' I thought. But alas. It did not. In fact, clean installation, new disk, (and yes, I booted from this 2nd disk), the same BSwC problem.
So, please, Dear Apple Support Discussions, let there be someone out there smarter than I (I'm really not that smart, but I do follow instructions well).
-Ty

How long did you wait for the blue screen to go away? I also have a iMac G5 2GHz ALS.
My computer has been having a problem where on the first boot of the day, it it would hang in the gray screen for about 1.5 minutes and the blue screen for about 4 minutes. I thought it was permanently hung but discovered that it would eventually present the login screen. I could then login normally but none of my firewire external drives would mount. I could restart over and over and the same situation would be present.
Resetting the SMU seems to cure the problem and rebooting would be quick and all firewire drives mounted correctly. I could then reboot as many times after and normal behavior of the iMac would be repeatable.
However after having the system down for several hours and restarting it, the problem would be back.
I have now moved all my firewire drives to a powered hub and will watch over the next day or so to see if that changed anything.
Robert

Upon start I get a blue screen with B817977E

HP Photosmart C8180-all in one. I use a Mac Pro laptop. I updated the driver 4 years ago to my Mac. This year while in Fl I went to turn on the printer and I get a blue screen with the number B817988E on the screen. I haver tried re booting by unplugging both ends of the printer cord, but this does not work. Holding the on button in does not work. If it does come on My computer connects wirelessly, but does not print. Then it will not shut down.

lonnlar,
This article should help resolve the error you are getting:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03081973&cc=us&dlc=en&lc=en
Give the steps a try and let us know if it helps.
Best of Luck!
You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

What does it mean when you computer crashes and when you turn it back on it shows you a blank blue screen with a little folder and a question mark in the middle?

What does it mean when you computer crashes and when you turn it back on it shows you a blank blue screen with a little folder and a question mark in the middle? It's a old imac from 1997.

I don't have original discs that it came with.
Then you still can use the second option with the keyboard combo I posted, called "resetting the PRAM."
Also when you way hold the c key down do you mean turn computer off and turn back on holding the c key?
Yes, or you can simply restart. As you don't have the CDs, this isn't on the plate any more.
The internal backup battery is not expensive and, in most iMacs is user-replacable. If yours has a tray-loading optical drive like this one:
it takes a major teardown to replace the internal battery. If this is the case, you'd be better off to leave the computer plugged in all the time; that eliminates the main reason for having a working battery.
If it has a slot-loading optical drive like this one:
things are much easier. The battery is visible through the RAM access door on the bottom of the computer case. The manual:
http://manuals.info.apple.com/en_US/iMacG3_2000UserManual.PDF
has sketches of how to access the RAM and therefore the backup battery. Unfortunately, the pdf on the manual goes up sideways on-screen and the RAM instructions are pretty deep into the manual. It's probably easier to scroll (for a while) to the section on adding RAM and print the applicable pages.
When you work on the battery, some sort of non-conductive pliers or large tweezer or forceps help unless you have tiny fingers. Make sure to note the polarity of the old battery and install the new one in the same orientation.
The battery itself is readily available. If price is no oblect, you can get it for a small rasom from Radio Shack Store ("Tandy" outside the US) as part number 23-026.
Online, they are dirt-cheap even after adding shipping. I buy backup batteries form this outfit:
3.6v Newer Technology Lithium 1/2 AA PRAM Computer Clock Battery

Blue screen with *** STOP: 0x000000A5 (0x0001000A, 0x00000000, 0x00000000, 0x00000000)

HP Pavillion Elite m9150f PC
Windows 7
When I try to start my computer, I get a screen "Windows Error Recovery" and two choices "Launch Startup Repair (recommended)" and "Start Windows Normally". No matter which one I choose, I get a blue screen with "*** STOP:   0x000000A5 (0x0001000A, 0x00000000, 0x00000000, 0x00000000)".  I can't go any further. Then, I turn off the computer.
I restart the computer and choose F9-Diagnotics. When this opens. I see that the memory test has failed and has an error code of "BIOME-1"  and the suggestion to "Please contact HP Support".
Prior to all of this happening, I reinstalled an antivirus program that I've been using for several years with no problems.
So here I am.
What do I do now?
I'd appreciate your help.
Thank you.
Chris
This question was solved.
View Solution.

Here is the user guide. http://h10032.www1.hp.com/ctg/Manual/c01152947.pdf
Page 26 is the start of "Replacing memory"
{---------- Please click the "Thumbs Up" to say thanks for helping.
Please click "Accept As Solution" if my help has solved your problem. ----------}
This is a user supported forum. I am a volunteer and I do not work for HP.

Blue Screen with spinning coloured wheel

My girlfriend borrowed her iMac G4 Flat Panel to a friend and now it won't load the OS properly.
The following happens:
1. The grey screen appears (with the smiling MAC in the middle)
2. The Mac OS X start-up screen appears with the progress bar
3. Then a blue screen, with a spinning coloured wheel in the top left corner
4. After a couple of minutes, a few windows pop open (probably whatever the person accessed last)
5. The windows disappear and all you're left with is a blue screen and spinning coloured wheel in the top left corner
6. The MAC then remains in this state indefinitely
Unfortunately, I’m unable to tell what version of the MAC OS is running.
We cannot find the OS disk either.
I will greatly appreciate any assistance anybody is able to provide.
Thanks

Brannas...
Empty,Blue Screen.
http://docs.info.apple.com/article.html?artnum=106464
1. Start up in Safe Mode.(shift key at startup)
a. Drag the Fonts folder from the Mac OS 9 System Folder (not the Mac OS X System folder) to the desktop.
b. Drag the Fonts folder from ~/Library/Fonts to the desktop.
b. Restart the computer in Mac OS X.
c. If this solves the problem....you have a corrupt font in one of the above font folders
2. Remove incompatible third-party startup items.
a. Start up in Safe Mode.(shift at startup)
b. Open the Mac OS X hard disk.
c. Drag third-party items out of ....
/Library/StartupItems .......
/System/Library/StartupItems ...
Place them on the desktop .... If you're unsure whether an item is a third-party item or an Apple-installed item, don't move it.
d.Restart the computer.
Note.. If this resolves the issue, add the Startup Items one at a time until the symptom occurs again. That way you'll know which one is incompatible. Repeat these steps and remove the incompatible item.
3. If your computer still starts up to a blue screen, follow these steps.
a. Start up using cpmmand+S....(Single-User Mode).
b. Type: mount -uw /
c. Press Return.
d. Type:
mv /Library/Preferences/com.apple.loginwindow.plist preferences2.old
Tip: There is a space between ".plist" and "preferences".
e. Press Return.
f. Type:
mv /Library/Preferences/com.apple.windowserver.plist preferences3.old
g. Press Return.
h. Type: reboot
i. Press Return.
4. Reset certain privileges.
a. Start up the computer in Single-User Mode.
b. Check the volume with fsck.
c. Type: mount -uw /
d. Press Return.
e. Type: chmod 1775 /
f . Press Return.
g. Type: reboot
h. Press Return.
george

Start Up problems, I'm past the grey screen now at blue screen with spinning gears.

Hello I'm working on my Mothers I Mac I believe its a G5,, I do see IMAC 8.1. Today when she turned it on all that came up is a gray screen with a spinning gear. I tried Disk Utility but the HD wasn't being recognized. After a few more trial and errors I finally reset the SMU, Which when I ran disk utility again the hard drive was recognized. I verified it and it said HD seems to be ok. I restarted and sure enough I made it past the gray screen but now Its stuck on a blue screen with a spinning gear. It looks almost like the login screen is trying to load but never comes up. Every 10-20 sec it flickers and the gear just keeps spinning. The fan was never coming on, not until I reset the SMU so I'm currently letting it cool down. Hoping this helps. Should I run the disk utility again and click the repair hd, even though no errors were listed when I verified it.

An iMac 8,1 is an Intel model. Are you sure it's a G5 (not an Intel model?)
Perhaps you should try reinstalling OS X:
How to Perform an Archive and Install
An Archive and Install will NOT erase your hard drive, but you must have sufficient free space for a second OS X installation which could be from 3-9 GBs depending upon the version of OS X and selected installation options. The free space requirement is over and above normal free space requirements which should be at least 6-10 GBs. Read all the linked references carefully before proceeding.
1. Be sure to use Disk Utility first to repair the disk before performing the Archive and Install.
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
2. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
3. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
4. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
5. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
6. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update.

Blue screen with sound after clean install

Hi Everyone,
I have just replaced the hard drive on my MacBook Pro A1226 Model. The install went fine when it finished all I get is a blue screen with the osx music in the background.
I have tried deleting the ApplicationEnhancer file using single user mode, I have tried removing all the ATI Extensions but still no luck. I was able to get the welcome video up once but was unable to select my country or continue. I have also tried to complete the install using safe boot but no luck.
Any ideas or help would be brilliant.
Thanks in advance

Safe Boot by restarting your computer while holding down the "shift" key. Safe booting disables all nonessential processes, often times allowing you to start up when you would otherwise crash.
As of OS X 10.5.6 Safe Boot deletes the dynamic loader shared cache location in the /var/db/dyld directory. A corrupt cache here can cause the blue screen crash. Once you restart normally, the cache will be recreated. This should take care of the issue.
http://support.apple.com/kb/HT1564
http://support.apple.com/kb/HT1455
osx music
Music plays on startup?

Powerbook won't boot - stuck on blue Screen with rolling pin wheel

Hi, maybe someone could remove my current headache.
My old Powerbook G4 is stucked on a blue screen with an infinite rolling pin wheel(just after the little mouse arrow appears and disappears).
For the information:
- I already did all the possibilities on this page without success:
http://support.apple.com/kb/TS1411?viewlocale=en_US#symp1
- When I do Fsck in single user mode, it tells me that everything is fine with the HD
- I also checked techtool pro v4: everything is fine with the hard drive and files
- I can't start in safe mode
- I can't put my computer in Firewire target disk mode - the Fireware icon screen appears but it doesn't mount on my apple dekstop.
- I don't know where is my old PB G4 install disk, so I can't try that.
Message was edited by: NGrignon

I don't know where is my old PB G4 install disk, so I can't try that.
And, there in lies the solution. Without an OS disc to repair the OS you are up the creek without an OS disc.

Grey and Blue Screens with Spinning Pinwheel

Mid 2009 Macbook Pro 13 inch with Mac OSX Snow Leopard installed. 2.26 GHZ 4 GB 160 GB Version 10.6.3
I got this dead Macbppk Pro from my daughter . I put in a new battery and re-installed Mac OSX Snow Leopard from the licesned disc she bought so I could get rid of all her files and have free space and to make the Macbook now mine with my passwords etc. I got free support from Apple on how to install the disc and overwrite everything that was on it.
Until now ... I get a Grey Screen with the Spinning Pinwheel for endless time.
So the I tired the Hold Alt/ Option + Command + holding the P and R buttons while starting it up and got a Blue Screen with the spinning Pinwheel.
Any Help on what to try next ?
I only use it about once a month because I have a desktop. Does using it only once a month harm anything ? Should I be doing anything to not have this problem with it ?
Or do I have to re-install the disc again and if so .... what would be the procedure to do so ( I forget )
Thanks Eric

Hi Eric,
Thanks for visiting Apple Support Communities.
If your MacBook Pro is only starting up to a blue screen with spinning pinwheel, reinstalling OS X may be necessary. I would recommend going through all of these steps first:
Restart the computer in safe mode. If the computer successfully starts up in safe mode, choose Apple menu > Restart to see whether the computer will restart normally.
Starting up in safe mode
If you see the login window prompting you for a user name and password, but starting up doesn't progress, you may have incompatible login items.
Eliminating incompatible login items
Repair your startup disk or disk permissions by starting up from your Mac OS X installation disc and using Disk Utility.
Repairing a disk
Back up your disk and then reinstall Mac OS X by starting up your computer with your Mac OS X installation disc.
Reinstalling Mac OS X
From:
Mac OS X 10.6: If you see a blue screen at startup
Best Regards,
Jeremy

Very long blue screen with spinning sprocket at shut down

When I shut down my Mac Mini, after everything closes properly I get a blue screen with a spinning sprocket for a very long time. I end up having to power down and restart. It happens most of the time, interupted with an occasional proper shut down.
Any ideas on what this means?
Thanks for your time.
Kevin

Check Console in Utilities for messages from around the time of the shutdown. Check system.log expecially, but look around at some of the other logs as well. Also, try booting in Verbose Mode, CMD-V at startup. This will scroll text of the bootup sequence before it goes to the regular screen, but the next time you shutdown, it might scroll text of the shutdown sequence and give a clue as to what's going on there. Be ready with a camera or notepad to write down what you see.

My macbook pro freezes and then displays a blue screen with black stripes... do you know what's wrong with it?

My macbook pro freezes and then displays a blue screen with black stripes... do you know what's wrong with it?
I have a two and half year mac book pro... I've had some issues with the screen looking scrambled when I quit certain applications, but now it's turned into something worse. I'll be working on my computer and the thing will freeze. When I force restart, the first screen, the apple logo, will be a blue tint and won't boot up normally. Then I try safe mood and it will then boot just fine. But there are blue stripes on my screen. The screen alternates from a blue tint to normal and if the computer freezes again the screen will become completely blue with black stripes. I haven't tried reinstalling my software because I don't have the startup discs that came with my computer. If I was sure that would fix it I would purchase them, but if it's a hardware issue I'm afraid that I'm screwed. I've been able to successfully get the blue off my screen by putting it to sleep and then waking it up, but that's not working well anymore either.
Does anyone else have experience with this? Is it the firmware or what? I have a MacBook Pro from early 2011 and I'm running Mac OS X 10.6.8.
Please help... Thanks!

I just experienced this exact same issue with my early 2011 15" macbook pro. Since like a month after purchasing it I had issues with the screen randomly going dark on me. I sent it in for repair inder waranty they replaced the gpu and logic board but I continued to have the same issues with the screen randomly going black sometimes I would need to reboot it in order to get the screen to go back on but it happened so infrequently and I used the computer for school so disnt find the time to resend it in to apple. Just last night the screen started to display the blue screen with black verticle lines on it. I called apple and explained to them the issues that had been ongoing since I purchased the laptop but they said because I was now outside of warantee that any repairs at thia point wouldn't be covered. Fml so glad I spent 2200 on this future proof macbook pro what a joke my sister purchased a toshiba laptop for 300 4 years ago and it still running like a champ. I loved my macbook but at the price I paid I expect it to last longer than 2 years before leaving me high and dry. *** apple??

Blue screen with Discoverer 3.1 End-User

Similar Messages

Maybe you are looking for