Blue screen with error ,radeon 5670 to play world of warcraft.says shutdown to protect

Compaq SR 5710y,operating system is Vista 32-bit..My son used to play World of Warcraft and now it is crashing while playing.It appears a blue screen and says something like was shutdown for protection.I can not read it because it turn off very quickly, but it also says that one of the causes can be related to graphics or something like that. The computer has a Radeon 5670 video card inserted.
This question was solved.
View Solution.

lizy62,
As I do have an HD5670 in my m8100eCTO, I bought this 530W PSU;
http://www.newegg.com/Product/Product.aspx?Item=N82E16817182199
I am a volunteer. I am not an HP employee.
To say THANK YOU, press the "thumbs up symbol" to render a KUDO. Please click Accept as Solution, if your problem is solved. You can render both Solution and KUDO.
The Law of Effect states that positive reinforcement increases the probability of a behavior being repeated. (B.F.Skinner). You toss me KUDO and/or Solution, and I perform better.
(2) HP DV7t i7 3160QM 2.3Ghz 8GB
HP m9200t E8400,Win7 Pro 32 bit. 4GB RAM, ASUS 550Ti 2GB, Rosewill 630W. 1T HD SATA 3Gb/s
Custom Asus P8P67, I7-2600k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX660 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Custom Asus P8Z77, I7-3770k, 16GB RAM, WIN7 Pro 64bit, EVGA GTX670 2GB, 750W OCZ, 1T HD SATA 6Gb/s
Both Customs use Rosewill Blackhawk case.
Printer -- HP OfficeJet Pro 8600 Plus

Similar Messages

Blue screen with error code and I have no recovery disks for HP Pavilion dv6-1260se

I have a HP Pavilion dv6-1260se with factory installed operating system of Vista. When booting up the computer, I receive a blue screen with this error message: STOP: c000021a {Fatal System Error}.
                                                            The verification of a KnownDLL failed. system process terminated unexpectedly with
                                                             a status of 0x0000221 (0x007fb9c0 0x00000000).
                                                             The system has been shut down.
I do not have recovery disks for this computer. I tried to order them but them seem to not be available. This is my daughter's computer. She says she started to have trouble after downloading Frost Wire (music share) and then she removed it. We tried going back to an earlier time and that didn't help and then the blue screen with error message appeared. What do I do now?
This question was solved.
View Solution.

Hi,
Assuming your in the US, recovery discs are available to order for that model here. That may be the best option.
You should also be able to do a recovery without the discs as well. Take a look at this document: Recover Windows Vista Operating System Using HP Recovery, and look for the section Restore the PC to its original condition with the HP Recovery Manager if Windows Vista is not accessible. This should allow you to recover the PC.
R
Although I am an HP Employee, I am speaking for myself and not for HP.

My macbook13in has a blue screen with error code 10813

my macbook 13in has a blue screen with error code 10813

Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Also see:
Reinstall OS X Without Erasing the Drive
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

Satellite A350 - Blue screen with error message

When starting windows7, I am getting blue screen with error message 0x0000116.
Can anyone assist please?

It looks like a graphic card driver is a trouble maker.Try to reinstall a graphic card driver in safe mode (f8 on startup). Read this article for information:
http://social.answers.microsoft.com/Forums/en-US/vistahardware/thread/eb584685-6b8b-4ad7-b6cc-ae5ee78095fb
It's for VISTA but should be the same for win 7 too.

Blue screen with error message

Product Name: HP Media Center M7250n Desktop PC
Product #ED842aa-aba
I have been getting a blue screen with error messages that ask if this is the first time i get the error and then at the end it says it is dumping memory. I would like to wipe my harddrive and reinstall XP but my system is out of warrenty and HP won't provide me a recovery CD. What are my options.
This question was solved.
View Solution.

Hi,
You are most welcome.
"I work for HP."
Please click the "White Kudos" star to say thanks for helping.
Please mark "Accept As Solution" if my help has solved your problem.

My C5280 All in one printer flashes a blue screen with error B0248122.

It flashes a blue screen with a different B 8 digit number each time. All the buttons on the front flash yellow. I have to unplug it to turn it off. Occasionally it will say to turn it off and turn it back on, but it rarely solves the problem. This used to be an infrequent problem, only appering occasionally, now it is all the time and am not able to use my printer at all.
Any ideas?

Hello,
This error typically is caused by some issue with the ink delivery system.
Recommend to follow some steps mentioned in this link:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00489814&lc=en&cc=us&dlc=en&product=4083871#N51
Hope this helps.
I work for HP.

Machine Check blue screen (with error codes)

I thought I had this fixed, but apparently I was wrong. Every now and then, for what seems to be no apparent reason, I get this blue screen error:
Quote
CRITICAL STOP: MACHINE CHECK EXCEPTION
A problem has been detected and windows has been shut down to prevent damage to your computer.
If this is the first time you have seen this stop error screen, restart your computer. If this screens appears again follow these steps:
Check to make sure any new hardware and software is properly installed. If this is a new installation, ask your hardware or software manufactorer for any windows updates you may need.
If problems continue, disable or remove any newly installed hardware or software. Disbable BIOS memory options such as caching or shadowing.
TECH INFO: ***STOP: 0x0000009c (0x00000004, 0x80545ff0, 0xb2000000, 0x00070f0f)
I had similar problems before, but the blue screen is new after replacing my video card. (Before the new video card, the computer was freezing up with a black screen. I'm assuming the blue screen is a step in the right direction?) Original thread is here.
Right now, this is my current system:
Motherboard: K8T Neo-FIS2R [Bios version 2.0 (I think; its the most current version as of 2-15-05)]
CPU: Athlon 3000+
PSU: Antec Truepower 550 (+5V=40A; -5V=0.5A; +12V=30A; -12V=1.0A; +3.3V=32A; +5V SB=2A)
RAM: 1 1GB DDR400 (cas 3.0)
HD: Seagate ST320082 200GB SATA Drive (VIA driver)
DVD: LiteOn DVD Rom
Floppy Drive
Running Windows SP2, all current updates installed
NVidia 6800GT video card (Asus; using TechConnect driver)
Soundblaster Audigy 2
DLink Wireless Network Adapter (DWL-G520)
I have tried replacing the RAM, HD, video card, and Power supply with similar results.
The error message clearly states that I should try disabling memory options such as BIOS memory options such as caching or shadowing, but I don't know what affect this would have if I did this. Any opinions on this and other suggestions would be greatly appreciated.
Thanks...
- doubleozero
- EDIT -
One more note: Nothing is overclocked in PC. All temperatures seem normal. CPU does not go over 38C.

I ran memtest for about 5 hours with no errors. I'll give it a go for a while w/o the sound card for a week or two.
I wish this thing wasn't so hard to troubleshoot. For example, it was happening about 2 times a day before I tried new ram. After going with the new stick of ram, it was fine for about 10 days, so I thought it was solved. Then last night, I got two of these again.

HP OJ 8500A Blue Screen with error c0260000 (Solution)

The root cause of this error occurs only when a Linksys router sends “0” value parameters to the HP Officejet Pro 8500A e-All-in-One series for IPv6 renewal.
Use the following steps to disable IPv6.
1. Go to the Embedded Web Server EWS, click the Network tab, and then click Network Protocols .
2. Change the setting to Enable IPv4 Only .
3. Click Apply , and then click OK to save the setting.
4. Send a print job and make sure the printer prints successfully
If any error appears, click OK or refresh the EWS page.
1. Click OK , or refresh the web browser manually to remove the error message.
2. Go to the EWS, click the Network tab, and then click Network Protocols .
3. Change the setting to Enable IPv4 Only .
4. Click Apply , and then click OK to save the setting.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"
This question was solved.
View Solution.

Fadigem wrote:
Hello Praveen,
I have actually disabled the IPv6, and the printer worked fine for 5 days but then the same problem occurred!!
I went to Control Panel / Network & Internet, to check if IPv6 was enabled automatically, but I found it to be still disabled and my printer is doing this crazy blinking again.
Please advise back. I'm really tired of switching it on and of again, and having to apologize to my clients all the time for not receiving their faxes!!
Thanks
Hi,
Is the printer connected in wireless??? Connect the printer using ethernet cable and this issue should not comeup again. Also check if the router has latest firmware installed. If all fail, contact HP Tech support.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

After Blue screen with Error B864F472, a blinking display after several minutes ( Type HP-6510e)

Hi all,
After, bout 30 minutes my HP-6510 display is blinking, including the wireless and powerbutton. All together at th e same time, in the same frequentie.
Only thing i can do is push the powerbutton, then it will come bach normally and you can print.
or pull out the netgear, plug it in, then it will come bach normally and you can print.
After (aprox.) 30 minutes it's start blinking again, not possible to print then, and loss of connection via eprint.
WHAT is it ??? (it's not normal, i assume)
Grtz, Haapeetje

Hi Haapeetje,
If it is still occurring after all of that it is going to be an issue with the hardware of the printer. I recommend calling into HP Technical Support to see what options are available to you.
Thank you,
I worked on behalf of HP.

Blue Screen with Error Code B8156CEO

Hi,my printer shows this error code after turning it on. All the lights are blinking. Plugging off the power supply or trying to reset by holding the power on button doesnt work. Seems to be in a firmware loop. There is some rest of connection to the imac but only basics (name of printer, model) I have only connection over wifi. please help kind regards

Same problem here. It started on the 29-7-2015. I tried the solutions mentioned here, but no result. The Printer I bought on the 21th of march, so 4 months and 8 days.. Til this date I was content, but now... not of course.. its not a long time isnt it? I did make around 50 copies.. (Not very much) It seems that previous month and around 29-7 alot entries I read about this problem on websites.. in short: there are at once lots of these errors.. what is the reason? I will go to the shop I bought the printer, I have garanty for 1 year legally, so i'm gonna ask there..it feels so...how must i say... helpless !

I'm running Windows7 on parallels desktop on my new MacBook Pro 13" retina display and I am getting a blue screen with error "bad pool banner". Any help in resolving this would be greatly appreciated.

Can anyone help to resolve the "bad pool banner" issue please?

Did you try the Parallels site, since it is Parallels you are having troubles with?

Blue screen fatal error messages - laptop always crashes and now won't even let me restore

My dv6920ea laptop has developed a fault and keeps crashing with blue screen errors, such as "IRQL_NOT_LESS_OR_EQUAL". The problem has become so bad that it happens everytime I turn the laptop on. The laptop ran "Windows memory diagnostic tool" which said that there was a hardware fault. I've tried running a full system recovery to factory setting but sometimes the laptop crashes, and when it doesn't it asks me to insert a windows disc, but my laptop didn't come with one. The laptop is a year and a half old. What can I do to fix this issue? I don't mind completely recovering the laptop to factory settings and I have most(!) of my files backed up.

Hello djbless,
You’re getting blue screens with error IRQL_NOT_LESS_OR_EQUAL.
Run diagnostics to make sure that you are not having a problem with any of the hardware.
Turn off the computer.
As you power it back on tap the F2 key. This will load hardware diagnostics.
Run the startup test.
Go to HP.com and update the drivers, there is a button that says Let HP scan your system for out-of-date and missing drivers and software
Here is a link to the updates.
Clicking the White Kudos star on the left is a way to say Thanks!
Let me know how everything goes.
Have a good day.

Hp g6-1278sa get blue screen and error message when trying to load xp pro

I have setup a new 500gb toshiba SATA 2 harddrive to run daul boot.
Windows XP pro 32bit and windows 64bit.
Unable to install XP pro, just goes into error and blue screen.
Ive removed the harddrive and placed it in my Packard Bell, loaded XP pro 32bit and win 8 64bit with no problem, and both run fine.
Removed the harddrive from the packard bell laptop and place it back into the HP g6-1278sa, daul boot screen on start up.
Opptions windows 8 or earlyer windows.
Windows 8 works fine.
Windows XP pro starts to load and then we get the blue screen with error message.

Hi Powlers
Ok read this tutorial ( link below ) in how to install XP within Windows 8 OR running Virtual Machine
  http://www.howtogeek.com/171395/how-to-get-windows-xp-mode-on-windows-8/
  OR
  http://www.fixedbyvonnie.com/2014/03/legally-install-windows-xp-free-windows-8-using-virtualbox/
Quick question :: What operating system was your machine shipped with initially ??? Windows 7 ???
Checkurtech
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem****

Blue screen with the following error SYSTEM SERVICE EXCEPTION (ACPL.sys)

Hi,
I had a blue screen with SYSTEM SERVICE EXCEPTION (ACPL.sys) error message yesterday.
It happened right after the graphic card update was completed. I have an HP Spectre XT laptop with Windows 8 and Intel(R) HD Graphics 4000.
After restart, I noticed that the available free space on my hard disk dropped by 4 GB!
Can you please assist?
Thank you.

We do need the actual DMP file as it contains the only record of the sequence of events leading up to the crash, what drivers were loaded, and what was responsible.
WE NEED AT LEAST TWO DMP FILES TO SPOT TRENDS AND CONFIRM THE DIAGNOSIS.
You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.
If you are overclocking stop. (chances are if you dont know if you are, you are not)a
To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder. We need at least 2 DMP FILES to diagnose and confirm
The procedure:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button. (if available on your site, MS doesnt have this)
*Please upload them to a file sharing service like Skydrive or"Rapidshare" and put a link to them in your reply.
Link for how to upload below.
http://www.wikihow.com/Use-SkyDrive
To ensure minidumps are enabled:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.
Please also run MSinfo32 and upload the output as well.
To run MSinfo32 please go to start>run>MSinfo32
Go to "file" "save" and upload the saved file with the DMPS
System specs are extremely useful so please include whatever you know.
Blue Screen View & Who Crashed are often wrong and should only be used in an emergency
Team Zigzag3143.com
Wanikiya & Dyami--Team Zigzag

Stuck on blue screen with clouds rainbow, floated ...

As it says.
When I start Skype, it goes straight to a blue screen with blue clouds and a green rainbow at the bottom. I get no prompt to login. I have followed various guides, such as renaming login to login1, deleting login, restarting the computer, uninstalling then installed skype (which gets me an error code 2734 I think), uninstalled and installed Internet Explorer. I have run windows update and everything is up to date. I also followed the advise in the floated topic, and even after using Command Prompt (which was not in Accessories folder, had to search cmd to find it) and restarting, the 'click this button' does not work.
Skype was working fine on Sunday, and now it is broken. The only thing I have done in the meantime is run a repair tool for Windows Media Player as a game I installed required it to play in game music.
EDIT: I use Windows 7.
Solved!
Go to Solution.

Scripting in Internet Explorer might be disabled by an Antivirus software. What Antivirus software is installed on your computer?
Meanwhile you can try the “legacylogin” workaround, which should enable login to Skype using the old legacy login window. However, you will not be able to login using Microsoft account (email address).
Quit Skype. Make sure that you don’t see any Skype.exe processes in Windows Task Manager. If necessary, then stop these processes.
Open this folder on your computer:
C:\Program Files (x86)\Skype\Phone\
You should see there the Skype application file (Skype.exe). Right click on the Skype.exe file and select: Send to – Desktop (create shortcut). Right click on the newly created shortcut and select Properties and then the Shortcut tab. In the Target field you will see now:
"C:\Program Files (x86)\Skype\Phone\Skype.exe"
Click with your mouse on the text in the Target field and move your curser one space after the last quotation sign and add the text /legacylogin. The text in the Target field should now read:
"C:\Program Files (x86)\Skype\Phone\Skype.exe" /legacylogin
Click OK to save the changes. Start Skype using this new shortcut. Can you now login to Skype?

Blue screen with error ,radeon 5670 to play world of warcraft.says shutdown to protect

Similar Messages

Maybe you are looking for